Importing video with sound to GarageBand 2.0 and iOS 7.0.4

Importing video with sound to GarageBand 2.0 and iOS 7.0.4
My daughter has an iPad 2 with GarageBand 2.0 and iOS 7.0.4. She would like to import a video file which has a sound track on it to GarageBand for iPad so that she can add an additional sound track to it. The video/audio file to be imported would be in AVI, MPEG2 or another iPad compatible format. Is this possible? If so, how would the mechanics work? Would you: (1) load the file into the Movies section of iTunes and import the file from the Movies section of iTunes; (2) save the file onto an SD card and import the video/audio file from the SD card by inserting the SD card into an "SD adaptor" on an "iPad Camera Connection Kit"; or (3) email the video file to yourself and upload it to GarageBand from email?

This is part of a mobile training application and I allow the learner to record an audio response in addition to viewing the videos. When they record a response, you can hear the playback so the device has its volume up and working when the app is running. Since I posted this issue, I switched to .flv video and that plays ok. It's apparently the .mp4 video that's a problem. I'm encoding it with ffmpeg and suspect that it's something with the settings. Do you have a recommendation for mp4 settings for OSMF?

Similar Messages

Capturing/recording/saving front camera as video (with sound)

hi,
would it be possible to record a video with sound (front camera) on mobile devices (ios and android)?
i need to save the video on a webserver when it's finished recording.
i don't want the user to leave the main app so it would be necessary to use a custom recording solution.
anyone knows how to achieve this?
cheers,
marc

Copy the entire folder structure from the camera to your hard drive and import from there
The reason why is in http://forums.adobe.com/thread/1015001?tstart=0

I do I import a video with sound from a Sony CX150 Handycam to my MacBook Pro?

I do I import a video with sound from a Sony CX150 Handycam to a Mac Book Pro? I imported the video but there is no sound.

Type of video file, .mov, .avi., etc.? Which application are you using to play the video.

Recording streaming videos with sound

Can I use quicktime for recording streaming videos with sound? If not which Apple software can do it?
Bye Christof

You can use Quicktime to record streaming video +with it's audio+ by using a very simple trick. Using the same cable you connect your iPod/iPhone to your car's stereo system, connect your Mac's Audio OUT to its MIKE IN jack. I used FILE / OPEN URL to select the video stream source, then selected FILE / NEW SCREEN RECORDING. In the resulting 'Screen Recording' dialog box, I set the AUDIO slider all the way to the right, and under the arrow to the right, selected "Built-in Input Line In" for the microphone. I then used the appropriate controls to play the stream and record it. The resultant file was very acceptable. Good luck.

Iphoto 9.5.1 will not import videos with .mpg extension from my pictures folder and keep getting a OSStatus error-54. Is there a way I can import such videos to the iphone library?

iphoto 9.5.1 will not import videos with .mpg extension from my pictures folder and keep getting a OSStatus error-54. Is there a way I can import such videos to the iphone library? Pls help.

This is what that error means:
-54
permErr
Software lock on file; Not a subscriber [permissions error on file open]
Download and launch BatChmod. Put the videos into a subfolder and drag that folder containing the video files into the Batchmod window. Make sure you are the owner and have R,W, X access as well as the group. Everyone will have R only.
Check the Change ownership and privileges, Unlock and Apply to enclosed boxes and then click on the Apply button. When done try importing the files again.
OT

I couldn´t see imported videos with Adobe Premiere pro

Hello:
My name is Oren. I´m from Spain, and this is my problem.
One month ago I bought a Toshiba Satellite 850-31M. It has an x64 processor, 16 GB of RAM and I have 2 hard drives, the c: an SSD of 500 GB and other of 1 Tb hardisk, configured as D:. It has a GeForce GT 630M graphics card with 2 GB of RAM. W8 operating system.
I wanted to try the Adobe Premiere Pro CS6 and I downloaded the trial version. No problem, until I tried to import a video in the source window. Appears a small window that says "importing" and give to play in the source window and start .Audio be heard, but not the image. I've tried different video formats and always the same. The same video are seamlessly Quick Time and other video viewers ..... I do not know what to do, I think I've tried everything, even restart the computer to its factory settings and install Adobe Premiere vacuum and the problem remains. I tested with a trial of Premiere CS5.5 and got it. You hear the audio but no video . Insert the video in the timeline and recognizes it as such, even the first frame, but said, is not seeing in the "source", nor in the preview, only the audio.
What could it be? Am I you could lend a hand I'm desperate?
thank you very much

Hello:
I have the vídeos in a hard-disk. I'd tried in different video formats and
always the same. I hear the audio but I couldn't see the video image.
El jueves, 25 de abril de 2013, Jim Simon escribió:
Re: I couldn´t see imported videos with Adobe Premiere pro created by Jim
Simon <http://forums.adobe.com/people/JSS1138> in Premiere Pro - View
the full discussion <http://forums.adobe.com/message/5265806#5265806

HT202786 my friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)

my friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)

DVDs are encoded into MPEG2, which iMovie cannot edit. So you need to convert the DVD back to something else. For highest quality, I recommend that you convert the DVD to Apple Intermediate Codec. There is a free tool called MPEG Streamclip that will do this. You will also need to install the Apple QuickTIme MPEG2 Playback Component.
Here are the details.
1) Download and install the Apple MPEG2 QuickTime Component ($20) - available online from Apple.
2) Download and install MPEG Streamclip from Squared 5 (free).
3) Start MPEG Streamclip
4) Insert your DVD into your Mac. If DVD Player or Front Row starts automatically quit those.
5) Open a Finder window. Navigate to your DVD to the Video_TS folder.
6) Drag the .VOB files from the Video_TS folder and drop then into MPEG Streamclip.
7) If MPEG Streamclip offers to fix timecode breaks, say yes.
8) Use FILE/EXPORT TO QUICKTIME to convert the files to Apple Intermediate Codec (or h.264 if you prefer)
9a) Optional: You can deinterlace your footage in this step, if you like
9b) optional: If you know the date and or time of the footage, name your file
clip-yyyy-mm-dd hh;mm;ss
(let mpeg streamclip provide the extension). This will provide metadata that iMovie will use to put the event in the right year and month.
9c) Optional: If you don't want to make one huge clip out of your DVD, you can make smaller clips by using MPEG Streamclip. Move the cursor to the "in" point of the clip, and press i. Move the cursor to the "Out" point of the clip, and press o. Then do steps 8 through 10 and repeat until you have done this for all clips you want.
10) Save the resulting file in a place where you can find it, like your Desktop.
11) Open iMovie.
12) In iMovie, choose FILE/IMPORT/From File and choose the file you saved in steps 8, 9, 10.
13) iMovie will generate thumbnails and you can edit.

My friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)

my friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)

Welcome to the Apple Community Diane.
I find that shared video can be troublesome, a few haven't appeared to work as you describe but have done when I've looked at a later date. Hopefully they will work if you give them a bit longer. perhaps it would be a good idea if you make sure they are working before deleting them from the camera roll.

HT204382 I downloaded Flip4 and Divx but still cannot videos with the following ext: wmv, avi and asf can anyone help

I downloaded Flip4 and Divx but still cannot videos with the following ext: wmv, avi and asf can anyone help

Try Perian and VLC.

Experience with Air 4.0.0.1628 and ios 6

Dear developers, I was wondering if anyone has tested and had crashes when saving data with Air 4.0.0.1628 and ios 6.
During the last few days an app that has been available since August 2013 for download on Itunes started developing issues/crashes with saving data using shared objects. It may have always had these issues since I updated it using Air 4.0.0.1628 but I only detected it yesterday.
At first, I thought it may be due to low memory on the Ipad, but I was unable to replicate the failures/crashes on an IPAD with ios 7 and about 88 megabytes of free memory. I am currently using Air 4.0.0.1628 and flash pro cs6.
Unfortunately, I no longer have access to the IPAD that the app was crashing on and cannot do further testing on it, but it had ios 6 installed in it.
Thanks
Justin

I'm not implying that the server/Facebook way is to work around the lack of local storage - just that it happens to help in this situation (and any where, for example, the app is reinstalled or the user moves to a new device etc).
Also, it's not just to help work around the SO problem It's also for the complete social implementation, right (virallity, FB game API etc) For that, I don't mind including the ANEs and all that jazz.

Import iMOVIE with sound? Export Final Cut Project to Pro Tools?

I am considering the 30 day free trial for Final Cut Pro X. I have a new Macbook Lion laptop.
I made a short film in iMOVIE 09 on my new laptop. I am getting it professionally scored next week. Can I seamlessly transfer iMOVIE project into Final Cut Pro X so that it keeps all my audio tracks? For example, I have natural background sound on many video clips. I have also added "monster" sound effects all over the place. I have voiceover here and there as well. So I am wondering if I import iMOVIE project to Final Cut Pro X are all the sounds merged (I don't want this) or does the project appear in Final Cut Pro X just like it does in my iMOVIE (video clip with a few audio clips under it)?
Second question - The audio post company would need to export the project from Final Cut Pro X to a software program called Pro Tools. There are a whole bunch of "preferences" needed to be checked off to make sure they get project the way it should be. However, my question is does anyone know if Final Cut Pro X is compatible with Pro Tools Software?
FYI - if I don't do the above I was told I need to make 8-9 copies of DVD of movie in iMOVIE. One would be video with natural sound when I filmed and all other sound turned off. Another DVD would be just voiceover sound and all other sound turned off etc... The audio post company needs each sound isolated so they can manipulate audio levels etc. This sounds like pain in butt which is why I am attempting to see if I can do the above.
Thanks, Todd

Thank you all for help. Spoke to engineer at audio post company. I told him it sounds like that I can export iMOVIE project to Final Cut Pro X and keep audio tracks. However, I cannot export Final Cut Pro X project to Pro Tools. Hence, no point in moving iMOVIE project to Final Cut Pro X.
The engineer told me to make Quicktime files of the 4 minute movie with each different audio track. He said as long as the track does not overlap I can have multiple sounds... for example, if my voiceover occurs from 0 sec. to 30 sec and that is only sound then I can keep in a monster sound that occurs from 1 minute to 1 minute 30 sec. etc.
I did forget to ask him one question. One filmmaker noticed that I had stereo monster sounds and mono monster sounds. I would think most people would not notice difference but the filmmaker did. Not sure if this company can fix something like that?
Thanks again for all your help. The thing that is weird about all of this is if I buy the latest and greatest Final Cut Pro X and make my next project from scratch with it I still won;t be able to export using Pro Tools... Sounds like Pro Tools only works with Final Cut.

Playing imported video with button

So I'm working on a project that requires me to click a transparent button in the Flash presentation and have an imported video appear, play, and then disappear. I've scoured the internet but can't for the life of me find what I'm looking for. Would someone be willing to give me a hand. I'm new to Flash and this honestly sounds easy enough but I can't for the life of me figure it out.
Thanks

Hi,
I have the same issue with my video clips mixed with photos in the iPhoto Library!
Is there really no possibility to show them in a mixed mode with FrontRow?
@Apple: Cant' you update FrontRow with this feature?
The only application I found for that issue is Photeo Presenter!
THX
Leo01

Getting videos (with sound) on my iPod?

I just got a iPod Video, but I had previously downloaded videos from the internet. I added the videos onto iTunes with no problems, but syncing it to my iPod is another story. Itunes had stated that I had to convert the video files in order to put them on my iPod, but when I did that and played it back in iTunes and on my iPod there was no sound! Can anyone help me?

I had the exact same problem. I used Videora off the internet. It's free and it converts all video files to a format that itunes and ipod recognizes. Try the following link.
http://www.videora.com/en-us/Converter/iPod/
Windows XP

Will MPEG-2 convert a video with sound?

I've converted my videos to MPEG-4 using Quicktime Pro, and they play fine but with no sound.
Is this the application I need to convert them with sound?
http://www.apple.com/quicktime/mpeg2/

I've converted my videos to MPEG-4 using Quicktime Pro, and they play fine but with no sound. Is this the application I need to convert them with sound? http://www.apple.com/quicktime/mpeg2/
No. As Kay tried to explain, the MPEG2 component will simply allow you to extract the video data from a "muxed" stream of audio/video information. To extract and convert both audio and video data, use an MPEG based third party application like MPEG Streamclip (free). This application uses MPEG routines to decocde "muxed files (e.g., MPEG1, MPEG2, VOB, etc.) and then uses your QT Tools package to convert them to an iPod specific (or other QT compatible) format. (NOTE: Windows version of MPEG Streamclip does require the Apple MPEG2 component you asked about.)

Importing video with correct date

I'm having issue importing videos into iphoto with the original date of the video. I'm importing from a canon vixia HFS10, when i tried it a month or so back it went into iphoto correctly, with the original date but now whenever i try it, even with the same videos that worked date wise before, it only imports into iphoto with the date that i actually imported it with.
Any ideas?
I know you can alter the date via the edit options, but this seems a bit backward when i know, somehow, that i can import the video automactially with the date.

i only imported the videos from the same camera, one time they went with the date it was taken, the other time i tried a couple of weeks later it only imported with the date of import so it's not the camera

Importing video with sound to GarageBand 2.0 and iOS 7.0.4

Similar Messages

Maybe you are looking for