Importing videos - Q-Time can't "parse" the clips

Just bought a Sony DCR-SR100. I've copied movies into a folder on my hard drive using the USB cable. When I go to import, iMoive doesn't recognize the clips, saying Quick Time can't "parse" the clips. Anybody have a solution?

I downloaded MPEG Streamclip and that doesn't seem to be working either (still the same error message). Do I need the Apple software you mention as well? You referenced playback vc. editing in your reponse.
I can't playback on my computer. As I say, when I go to import, I get the error message that there is an error in importing b/c QT can't parse the clips. The Sony instructions send me to download $200 worth of software. I thought iMovie does that for me and this was supposed to be easy.

Similar Messages

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)? I edit the presentation depending on the audience to which I am presenting.

If you add a new slide with just a text box (therefore a very small amount of data), to an existing presentation then save, Keynote will only save the new content to the file, it wont save pre-existing content as its already included in the file.
The time taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

I keep getting the message "macintosh hd disc full" when I try to edit or import video. How can I make room?

I keep getting the message "macintosh hd disc full" when I try to edit or import video. How can I make room?

You can go to Applications, Utilities, Activiy Monitor to see just how much space is available. To free space you need to remove files that take a lot of space, things like videos, photos, music. Get an external hard drive, OWC http://www.macsales.com has a good selection, and move material off the internal drive.

What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

You should be able to select Force Quit from the menu beneath the Apple icon in Finder
and choose to Quit iPhoto from there, without messing up the Mac OS X in the process.
OS X - Support
Not sure if rebuilding the iPhoto library would help this issue. However if you had to
turn off the computer without the correct method (unplug, etc; instead of menu choice)
the system may have accrued damages and should be checked, maybe repaired by
use of the Disk Utility in the system. Or restart the computer in Safe Boot mode, then
run 'repair disk permissions' while it is running in that reduced mode; then restart after.
•Understanding Safe Mode - tuts+ computer skills tutorial:
http://computers.tutsplus.com/tutorials/understanding-safe-mode--mac-59897
•OS X: What is Safe Boot, Safe Mode?
Suggestions on how to use Safe Mode in article, to resolve issues, may be helpful.
There likely are other means to rectify troublesome applications, including reinstall.
Be sure to backup your music, image, video, and other work on an external drive
or suitable device as a precaution against loss should there be a hard drive failure.
iPhoto - Mac Apps - Apple Support
There should be some tips and help information using iPhoto via this tiny Support link.
Good luck & happy computing!

Iation. When I import it to iMovie 6.0.3 the clip is on its side. How do I rotate it 90% . You ten have to turn your head sideways to view it ! How can I rotate the orientation?

I've imported a QTPmovie 10.03 from my iphone4 in portait orientation.
When I import it to iMovie 6.0.3 the clip is on its side. How do I rotate it 90% . You then have to turn your head sideways to view it ! How can I rotate the orientation in imovie 6.0.3?

Klaus
Unfortunately, I did not have any success with this.
These pages were " not found"
http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#vert-horiz_rotate
http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#43-169
and
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
only opened in http://www.apple.com/
- it kept deleting /downloads/macosx/video/mpegstreamclip.html .
However, I googled and found http://tips4mac.blogspot.co.uk/2007/08/rotating-clip-in-imovie-06.html this really helpful..and it worked !
regards
BKDB

Could not parse XMBMessage due to Can't parse the document

*Dear all,*
*i have a SOAP to RFC Scenario. XML Validation by Adapter is turned on in SenderAgreement.*
*XSD Files are placed in the correct directory. Incoming requests are validated. However,*
*it seems that responses produce an error in the soap adapter.*
*This is the error message i am getting:*
+SOAP:Fault>+
         +<faultcode>SOAP:Server</faultcode>+
         +<faultstring>Server Error</faultstring>+
         +<detail>+
            +<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">+
               +<context>XIAdapter</context>+
               +<code>ADAPTER.JAVA_EXCEPTION</code>+
               +<text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage due to Can't parse the document+
+     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1173)+
+     at sun.reflect.GeneratedMethodAccessor678.invoke(Unknown Source)+
+     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+     at java.lang.reflect.Method.invoke(Method.java:592)....+
*In SXMB_MONI my response includes the following passages*
+- 
+<Trace level="3" type="T">Pipeline Service = PLSRV_XML_VALIDATION_RS_OUT</Trace>+
+<Trace level="3" type="T">Skip Inbound Validation =</Trace>+
+<Trace level="3" type="T">Skip Outbound Validation =</Trace>+
+<Trace level="3" type="T">Area = XML_VALIDATION_OUT</Trace>+
+<Trace level="1" type="T">Reading sender agreement</Trace>+
+<Trace level="3" type="T">Validation Mode = Validation by Adapter</Trace>+
+<Trace level="1" type="T">Outbound validation of response takes place</Trace>+
+<Trace level="3" type="T">Interface Name = SI_xxx_xxx_xxx_Sync_Outbound</Trace>+
+<Trace level="3" type="T">Interface Namespace = http://xxx.de/xxx</Trace>+
+<Trace level="3" type="T">Software Component Version = D390B9E10A6B11DF8C15C7540A484C06</Trace>+
+<Trace level="2" type="T">Java Validation Service Call</Trace>+
+<Trace level="1" type="T">System error occurred during XML validation</Trace>+
+<Trace level="1" type="E">CL_XMS_PLSRV_VALIDATION~ENTER_PLSRV</Trace>+
+</Trace>+
+<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />+
+- 
+<Trace level="3" type="T">Persisting message Status = 023</Trace>+
+<Trace level="3" type="T">Message version 009</Trace>+
+<Trace level="3" type="T">Pipeline CENTRAL</Trace>+
+</SAP:Trace>+
*I see the following error message:*
+<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>+
+- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XML_VALIDATION_OUT">CX_XMS_SYSERR_VALIDATION</SAP:Code>
<SAP:P1>Schema xxx.response.xsd not found in J:\usr\sap\xxx\SYS\global\xi\runtime_server\validation\schema\00000000000000000000000000000000\ u00D3u00B9u00E1 k u00DF u00C7T HL \SI_xxx_xxx_xxx_Sync_Outbound\urnsap-comdocumentsaprfc~functions\xxx.response.xsd (J:\usr\sap\xxx\SYS\global\xi\runtime_server\validation\schema)</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>not used at the moment.</SAP:AdditionalText>
<SAP:Stack>System error occurred during XML validation</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
There seems to be an error in the adapter trying to validate the response. Does anyone has a clue as to why ?

Since i cannot get i running, i helped myself using a java mapping, that i packaged into a jar
along with the xsd files. See code below:
import com.sap.aii.*;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.BufferedReader;
import java.io.OutputStream;
import java.io.OutputStreamWriter;
import java.io.UnsupportedEncodingException;
import java.io.InputStreamReader;
import java.io.Reader;
import javax.xml.transform.sax.SAXResult;
import javax.xml.transform.sax.SAXSource;
import javax.xml.transform.stream.StreamSource;
import javax.xml.validation.Schema;
import javax.xml.validation.SchemaFactory;
import javax.xml.validation.Validator;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
@SuppressWarnings("unused")
public class CustomValidator extends AbstractTransformation {
     public void transform(TransformationInput arg0, TransformationOutput arg1)
               throws StreamTransformationException {
          Validator validator;
          InputStreamReader insr;
          String inputPayloadString;
          try {
               // Trace
               getTrace().addInfo("com.xxx.pi.mapping.validation.CustomValidator called");
               InputStream inputPayloadStream = arg0.getInputPayload()
                         .getInputStream();
               insr = new InputStreamReader(inputPayloadStream);
               InputHeader inpHeader = arg0.getInputHeader();
               String intfName = inpHeader.getInterface();
               getTrace().addInfo("Interface Name is :" + intfName);
               String xsdName = "";
               if (intfName
                         .equalsIgnoreCase("SI_xxx_Sync_Outbound")) {
                    xsdName = "Z_xxx.xsd";
               if (intfName.equalsIgnoreCase("SI_xxx")) {
                    xsdName = "Z_xxx.xsd";
               if (intfName
                         .equalsIgnoreCase("SI_xxx_Sync_Outbound")) {
                    xsdName = "Z_xxx.xsd";
               if (intfName
                         .equalsIgnoreCase("SI_xxxx_Sync_Outbound")) {
                    xsdName = "Z_xxx.xsd";
               getTrace().addInfo("Using schema: " + xsdName);
               if (xsdName.equals(""))
                    throw new StreamTransformationException("Schema für "
                              + intfName + " nicht gefunden.");
               BufferedReader reader = new BufferedReader(new InputStreamReader(
                         getClass().getResourceAsStream(
                                   "/com/xxx/pi/mapping/xsd/" + xsdName)));
               // prepare document validator:
               String schemaLang = "http://www.w3.org/2001/XMLSchema";
               SchemaFactory jaxp = SchemaFactory.newInstance(schemaLang);
               Schema schema = jaxp.newSchema(new StreamSource(reader));
               validator = schema.newValidator();
          } catch (SAXException saxe) {
               throw new StreamTransformationException(saxe.getMessage());
          // validate
          try {
               SAXSource source = new SAXSource(new InputSource(insr));
               validator.validate(source);
          } catch (Exception e) {
               getTrace().addInfo(e.getMessage());
               String trace = e.getMessage();
               throw new StreamTransformationException(trace, e.getCause());
          // Write the response
          try {
               inputPayloadString = convertStreamToString(arg0.getInputPayload()
                         .getInputStream());
               arg1.getOutputPayload().getOutputStream()
                         .write(inputPayloadString.getBytes("UTF-8"));
               getTrace().addInfo("Schema Validierung erfolgreich !");
          } catch (Exception e) {
               throw new StreamTransformationException(e.getMessage());
     // helper to convert to String
     private static String convertStreamToString(InputStream in) {
          StringBuffer sb = new StringBuffer();
          try {
               InputStreamReader isr = new InputStreamReader(in);
               BufferedReader reader = new BufferedReader(isr);
               String line;
               while ((line = reader.readLine()) != null) {
                    sb.append(line);
          catch (Exception exception) {
          return sb.toString();

When I connect my digital camera to my iPad it will only download the stills, not the videos. How can I download the videos? I have the USB and HDMI connectors for the iPad.

When I connect my Leica digital camera to my iPad it will only download the photos not the videos. How can I download the videos anyone please?

If your camera has an SD memory card, use the camera connection kit & the SD card to download to the iPad. That's what I do.
Another way that will work. Download the video(s) to your computer. Then you can use a USB flash drive & the camera connection kit.
First, Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie file into the folder. The movie file must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie file should appear & you can import.
 Cheers, Tom

Does someone know when our movie project and finally our iDVD project is done, can we erase the clip that we had imported in iMovie without danger? Or we have to keep the clip in iMovie until the DVD are burn?

Does someone know when our movie project and finally our iDVD project is done, can we erase the clip that we had imported in iMovie without danger? Or we have to keep the clip in iMovie until the DVD are burn?

Hi
Most processes in Non destructive Video editing is based on that the raw-material is safe and intact. So by trashing it most things can or will go wrong.
So e.g. in iMovie project - there is NO Movie - just a small text document refering to Your raw-material, audio files and photos (within or not in iPhoto Library) on how they are to act together to Play Your Movie.
And by changing any of them the Movie project will be affected or destroyed.
reg. iDVD there is also a link back to iMovie - Most famous to set of the iDVD BUG !
To do that - one starts a new iDVD project and add movies etc. Then find something i one movie in need to be adjusted. Closing iDVD and returning to iMovie and doing this. Then when back to iDVD it will notice and ask You to Up-date or Cancel. Neither works. The iDVD project is harmed. All Chapters now point to Chapter One and more strange things happens.
the medicine I use - I start a brand new iDVD Project and re-do it and hopefully not fine any more to be fixed in the movie.
This indicates the strong link inbetween iDVD and iMovie and I would not touch anything in iMovie till DVD is Burned and Ready AND Plays Well !
Yours Bengt W

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

How many times can you attempt the restrictions passcode?

I've forgotten the restrictions passcode I set on my iPod. Since I don't want to perform a complete systems reset just yet, I want to try to attempt remembering my passcode... how many times can I try the restrictions passcode without permanently locking it?

This is for the restrictions passcode correct? Not the regular passcode....
And I heard somewhere that if you guess too many times, you will be permanently locked out of your device...

How many times can you use the serial number to download the cd

help how many times can we use the serial number to download the cd photoshop elements 11

Download Photoshop Elements products | 13, 12, 11, 10
Mylenium

How many times can you enter the wrong pin code on an iphone before it resets?

How many times can you enter the wrong pin code on an iphone before it resets itself?

Hey Robin.T,
Thanks for the question. The following article provides the answer to your question:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you enter the wrong passcode six or more times, you'll see a message that says one of the following:
iPhone is disabled
iPad is disabled
iPod touch is disabled
You can also set your passcode lock to wipe the device after 10 unsuccessful attempts (Settings > General > Passcode Lock > Erase Data)
Thanks,
Matt M.

How many times can I attempt the passcode before I can't enter it any longer...it has been over 3 hours and it will not let me re-enter it?

How many times can I attempt the passcode before I can't enter it any longer...it has been over 3 hours and it will not let me re-enter it? My daughter forgot the new code she put in....

What dowes the screen say? If it just say disable and gives not time to retry then you have to restore the iPod
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

If you purchased AppleCare + within 30 days of getting your iPhone 5 you are allowed 2 instances of breakage replacement with a $49 deductible. If you do not have AppleCare + accidental breakage is not covered under you warranty, you can do an out-of-warranty replacement for $229.

An event in one of my libraries no longer has the event icon next to it's name just the name only. I can't view the clips in the event or import new clips. I've tried deleting the event and nothing.

an event in one of my libraries no longer has the event icon next to it's name in the browser just the name only. I can't view the clips in the event or import new clips. I've tried deleting the event and nothing. After control clicking the event it shows all the media that has been previously imported. But it does not allow anything to be done to the event including deleting. This showed up at the beginning of a normal import session. This is fortunately the back-up evant.

Did you perhaps mess with the contents of the library in the Finder?
You may try the solution suggested in this thread:
https://discussions.apple.com/message/24915790#24915790

Importing videos - Q-Time can't "parse" the clips

Similar Messages

Maybe you are looking for