Importing VOB - VOB imports only partially

Hello Comunity!
I have a problem importing a DVD (Video_TS) into Premiere Pro (CS5). VTS_01_1.VOB imports correctly, VTS_01_2.VOB imports only a tiny part of the data, the succeeding ..._3.VOB imports correctly again.
By using VobEdit.exe, the whole files are ripped correctly, except for the sound file who is a second or 2 too short... (sic). Also playing the DVD does not reveal problems.
Any suggestions?
For your records: I use now the m2v file created by VobEdit with the adapted sound file, but I would still know about the possible causes of the problem.
Lucien.

Try this:
http://www.videohelp.com/tools/XviD4PSP

Similar Messages

Importing Premiere Sequence - only partial

From Premiere Pro, I selected an 11 minute sequence - which contains about 30 clips - and then File/Send to Adobe Speedgrade
The sequence only partially came over. It stops at 3 minutes 25 seconds or so and in the middle of a clip. Any ideas?
I am running Win7, i7 processor with 16GB.
Lots of disk space.

You most probably have the work area bar not covering your whole sequence in Premiere Pro.

How can I import only jpeg and not jpeg plus RAW into Photos on iPad?

I capture both on my camera. I do post-shoot processing on computer (Lightroom/Photoshop) but want to see larger previews on iPad (the "new" version with retina display) than my camera LCD allows. I am using the Apple hadware adaptor to load from an SD card. The RAW files are taking up way too much memory on the iPad--it seems Photos imports both files at once. I can't figure our how to tell it to import only the smaller JPEG files.
If there is a better App than Photos for this, please advise. Note I will not be doing any serious editing on the iPad.
Thanks,
Doug

It doesn't matter what App you use it will copy all the photos from the SD card.
But I have a workaround;
All you do is import your JPEG+RAW images using the camera connection kit.
Go to Albums in the Photo App, choose Change, Choose New Album, give name, choose Last import, choose Select all photos, choose Finish.
Now go back into the photos app and delete all the photos from your "Last import" Album. It will say that it is going to delete them everywhere but really it doesnt because it leaves the JPEG in the new album. The result is that you will only have your JPEGs that you imported in your camera roll and the RAW images get deleted.
First try out before you delete photos from SD card!

How can I import only new pictures from my iPhone 5C?

I want to import only the newest pictures from my iPhone to my desktop. I used to get a prompt asking me if I wanted to import only the new pictures, and now there is no prompt and my only option is to import all of the photos on my iPhone. I appreciate any help!

Try iPhone Data Recovery - Easily Restore Lost Data from iPhone or similar software.

How to import only "missing" E-Mails from backup?

Hello everyone!
I have a problem with mail. I set up a new MacMini (w/ Mavericks, i7, 2014) from a backup of an older MacMini (also Mavericks, i5, 2012). I used the migration client and it all looked just fine, when I first started working on the new system. First thing, which was odd: I had my project folder with LOTS of content lying on the desktop (some 14 GB, a few thousand files in multiple subfolders). I noticed, of those 14 GB 12 GB went missing. No problem - I just copied the files from my old system (which I still have and which still works).
However, after I've been working with the new system for a couple of weeks, I noticed the same thing that happened to my project folder apparently happened to my (local) E-Mail folders. Again, the folder structure is still there, but tons of (mostly older) e-mails are missing. Since I've been working with the new system for quite some time now, the above-mentioned "delete and replace" approach is out of question, because all new e-mails, which I filed in the local folders would be lost.
As I still have my old system as a backup, it is no problem for me to retrieve all old e-mails manually. But is there a way how I can import only those mails, I have lost during migration? Or in other words: How can I sync the new and the old mail folders while avoiding duplicates and keeping the folder structure as is?
Every comment is highly appreciated! Thanks in advance..!

Quit Mail. Force quit if necessary.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
          Envelope Index
          ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. ClickOK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

I am new to IPhoto 9.5 and I think I missed a step. I uploaded pictures but they do not appear as an event in my library. They are in Last imported only. How can I get them into event.

I am new to IPhoto 9.51 and I think I missed a step when I uploaded my vacation pictures. I uploaded pictures but did not import them into the library. They are in L\last imported only. How can I get them into events?

If the Photos are under 'Last Import' or 'Last N Months' then they are in the Library somewhere, just not where you are expecting them to be. We know this as both Last Import and 'Last N Months' are not places, just listings of elements in the the Library.
The two most common reasons that they can't be found is either an incorrect date on the camera or the Sorting (View Menu -> Sort Photos - or Sort Events, as appropriate) has changed.
Quick route to find them: Right-click on one of the images in Last Import and select 'Show Event'. This will bring you to the image in the Library.

Is there a way to import ONLY videos into PE8, not photos?

I have a million photos I never intend to use in a Premiere Elements 8 production. Using the PE8 "Organizer," is there a way to import ONLY videos into PE8, not photos?

I do not use Organizer, so may be missing something, but I would guess that one could Sort By, and choose File Type. Remember, Organizer is for the system, and does not reflect what is Imported for use in a Project - two different things. In lieu of Organizer, I use Adobe Bridge, installed with some of my other Adobe programs.
I would also assume that Organizer does things via folders. If one does not have any aspect set to auto, I would think that it would ONLY do thumbnails for certain folders, as directed. If one has their stills in other folders, then only AV Assets would be seen by Organizer.
Maybe some Organizer guru will have better directions for you. I am just thinking here and speculating.
Good luck,
Hunt

I just purchased Aperture and have 20,000 photos in my iPhoto Library. Can I import only certain events from iPhoto into Aperture or do I have to merge the whole iPhoto library?

I just purchased Aperture and have 20,000 + photos in my iPhoto Library. I see that I can create a unified library between the two. I am wondering if I can import only certain events from iPhoto (like only 2014 events) into Aperture or do I have to merge the whole iPhoto library? Are there any benefits to bringing the whole iPhoto library over to Aperture (iPhoto is SO SLOW for me, I wonder if it is because I have so many photos). Or, any detriment to only bring a few events over?
And, if I don't merge the two libraries, I assume that means I cannot do it at a later date?
Help. My local Apple store has had very few Aperture workshops, and the next one is like 2 months away.

Thank you so much for this information. Here are some responses/comments:
Disk space - it says 114.43 GB out of 499.25 GB free. I have no idea if that is enough.
iPhoto version is 9.5.1
Again, I am not sure how to know if I have 3rd party software...but I don't think I do. Is 3rd party software anything non-apple?
I will try rebuilding the library. if that doesn't help, maybe I need more memory...? That is what Apple suggested, but that, of course, means buying something else. I've already bought APERTURE, on their recommendation...
It wasn't, and they told me it was slow because I had too many photos for iPhoto to handle and that I should buy Aperture. Which I did.
What is your iPhoto version? Are you using the most recent version 9.5.1?
iPhoto can handle 20000 photos, no problem. Your computer can be slow for several reasons:
The most common problem for slowness - insufficient disk space. Don't let your free disk space drop below 20 GB of free space, better more. If the operating system does not have enough working space and the applications you are using, you will notice a very lagging behaviour.
Older or incompatible softweare can cripple your mac. Do you have any older third-party software installed, that might have installed incompatible kernel extensions?
Aperture might be slow or keep crashing, if you imported a corrupted image or incompatible video, that cannot be processed. Then Aperture will try over and over again to create previews and never succeed. You could test for this situation, by launching Aperture with the Shift-key held down. This will defer the generation of previews. If Aperture will launch and work better this way, you probably have some bad media in your photo library.
Another problem to check for is a corruption of your Aperture/iPhoto library. You have run the First Aid Tools to repair the iPhoto Library, but have you ever tried to rebuild the library? See this post by Old Toad: Rebuild iPhoto Version 11

Why Does Premiere Pro CS4 Import Only 10 Seconds Of Layered Photoshop CS4 .psd??

Why Does Premiere Pro CS4 Import Only 10 Seconds Of Layered Photoshop CS4 .psd??
I have a 24 second clip I layered in Ps and when I import the psd into Pr THE SEQUENCE IS ALWAYS ONLY 10 SECONDS!
How can I change this? Why does this happen? I really need to know as soon as possible. I have a video project due this Wednesday (granted it's for an AV class where I'm just learning Pr. But I can learn VERY FAST!)
Thanks for your help.
--OSXniCKels

Just in case I wasn't clear in my last line "just Click-drag on the Tail of your .PSD to set the desired Duration," once you have Imported your .PSD (as Footage), just drag it to the Timeline, Click-drag on the right-hand margin (the Tail) and stretch out its Duration, as is required.
Now, if you Imported as a Sequence, open that Sequence's Timeline, and do the same.
I normally will set my Edit>Preferences>Still Duration to about what I think will be applicable, do my Import, and then with the Info Panel handy, just alter the Duration to suit.
Good luck,
Hunt
PS - Welcome to the forum.

How do i import only part of a song from a CD

I have a CD which has a defect, by error it has two songs in a track and the second must be ignored, i want to import only the first 3:30 minutes

Well when the audio CD is loaded you can select the track in question, right-click on it, choose Get Info, and go to the Options tab. From there you can check the boxes for Start Time and Stop Time and set the values according to your needs. When you rip the track, only the portion you've specified should be saved to a file.

Calculate excise for purchase order line items ( for import only)

Dear all,
please help me to calculate excise duty form ( imports only) purchase order for its line item.
i can calculate for domestics PO using "BADI_TAX_CONDITION" .\
But I need to calaculate custom duty also . so this BADI does not work .
So, please help me to calculate excise in Import PO .
Regards,
Nayan

Thanks for pointing me in the right direction. I was able to create my first BADI using the PROCESS_ITEM method. The following link was also very helpful: Re: BADI ME_PROCESS_PO_CUST Method:PROCESS_ITEM

HT204150 My Contact from ICloud imports only the name but not every thing else. But that only happens with my own card

My Contact from ICloud imports only the name but not every thing else if I want to import it to Contact on my Mac. But that only happens with my own card.
Before, my V-Card in Contacts on my Mac was ok, but now it disappeared. When I try to import it from ICloud only my name appears.
Can anyone help me? Thanks

The backup of your iPod Touch would include your camera roll photos. Restoring the backup to another iPod Touch or iPhone would recover them. Photos will not be restored by restoring the backup to an iPad.
Note: Apple deletes iCloud backups after 180 days of inactivity so be sure to do this before then.

How to import only rows of tables from from a dump file

Good day,
I have impoted a schema from a dump files with option rows=n,(accordingly it should import only structure of the tables)
now i want to import rows for these tables in that schema. Kindly guide me how to do that. I have used below syntax for import.
imp userid=system/manager@testdb fromuser=abc touser=abc file=d:\abctest\
abc.dmp log=e:\abc15.log buffer=100000000 ignore=y constraints=n grants=n statistics=none rows=n;
Any help willbe much appriciated.
Regards
Ansh

Hi Sybrand,
Thanx for the suggestion. Actually it is my fault that I had not explained the whole scenarion.
Let me explain it one by one...
(1) First i was importing a schema with rows=y option and I was getting some constraints error(can not insert NULL value in 'not null' column of some particular table) and import was unsuccesful.
(2) Then i desided to import only structure of the tables in that schema, and later disabled that constraint which was creating the problem.
(3) Now I m willing to import the data in these tables using that .dmp file, using rows=y, and this was my question if i m doing it in a right way or do i need to do some further step.
Hope this time i have made picture more clear.
Thanx a lot Hans and Sybrand
btw no wall around so can't bang my head :)

Is it possible to import, only changes since last import using imp/impdp

on our production environment, we export three times a day.(10.00AM,1.00PM,6:30PM)
and We only want to import the evening export - we have to kind of make sure that if the online system fails _ we have a data up to yesterday evening.
i.e. we want a sort of incremental import, for example we would have yesterday's evening import and today we only want to import all the changes since yesterday's evenings import - that means we want to import into existing database but we want to import only the changes since last import.
it would be great to hear from you
the database is 10g R1
thank you

Thank you all, for your prompt response
I know about RMAN, but our management outsourced our data center and the guys there does not look comfortable around oracle - and me as a DBA was assigned to taking this export backup and import it to another PC once in a day
so I was thinking if it was possible to import "incrementally"
it is good to know that it is not possible, because I don't have to spend time looking for a solution which is not there.
Thanks all

Import only the rows of emp table from Test into emp table of Prod

hi,
Test Instance:
=========
I have a table "emp". I want to take export of it.
Prod Instance:
=========
Table with name "emp" already exists.
I want to import only the rows of emp table from Test Instance into emp table of Prod Instance.
regards,
charan

Charan,
Set the import command IGNORE=Y
Importing into Existing Tables
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023662
Regards,
Hussein

Importing VOB - VOB imports only partially

Similar Messages

Maybe you are looking for