Importing Word documents into Robohelp 8: topic content is in a text box

Hi
I think I am doing standard stuff, but I have never used the import from Word function in RoboHelp before...
I used file > import to import a Word document, paginating on heading1 and heading2. All is fine, except that all the text of every topic is contained within a text box.
Can I stop this happening? (Or fix it easily?)
(I hope it is not relevant, and don't want to go into this unless it is relevant: but the Word document was actually the printed output from another RoboHelp project.)
Thanks and regards,
Peter Braham

What I am thinking is that any Word import needs some cleaning up and the HTML is generally not good, blame Word for that. By importing the topics, you avoid that.
The document is not exactly tagged as "from RH" and other products may well create documents in the same way. Bottom line is the way the document is created in Word seems to mean you get this problem in RH. It would probably be quite easy to find a workaround for that but you are still left with a Word import rather than a better RH import.
These forums will testify to the number of problems Word imports can cause because of Word's code.
See www.grainge.org for RoboHelp and Authoring tips

Similar Messages

Losy images after importing Word document into RoboHelp 7 HTML

We imported a simple Word document into RoboHelp 7 HTML, as a
new project (from scratch).
Everything worked out pretty well (afterall, this was just a
simple Word document), and we expect to have to tweak the styles,
etc. That is understood.
However, the images that were embedded in the Word document
(as opposed to saved to disk, and only linked to the Word document)
do not look very nice in the RoboHelp 7 HTML project topics.
When we browse to the iamge folder, and view the actual image
files, these images do not look too bad. But in the Design View,
the images have display issues (solid color bars on the
sides/top/bottom of the images). When we compile to a Single Source
Layout (except PDF), the images look fine again. When we create
Printed Documentation, even for the best PDF-settings, the images
look terrible -- smudgy, like low resolution quality).
1) Except for storing the images outside of the Word document
before importing, and then manually linking them back into the
imported RoboHelp HTML files, is there a way to maximize the
quality of the imported Word images in RoboHelp HTML?
2) Why doe the images look worse in Printed Documenation
(PDF), even for the highest PDF settings, than for the other Single
Source Layouts?
While I am typing, I realized that we should try to include
the images in Word via a link to the image files on disk. Perhaps
then RoboHelp will not actually modify the image files during
import. I will report back about this one.
Your help will be greatly appreciated!

Looks perfect, works terribly...
Things to consider:
Chances are, the different treatments of the space are due to whether the space was included in the bolding of the word in MS Word.
Additionally, since Word files contain much underlying binary code (macros and such), your security settings might or might not be playing well with the Word stuff.
Are you importing the Word file from a network location, or from your local machine? Network traffic might be partially impacting the import, too.
Bottom line? You'll probably need to clear all formatting in the Word file and redo the formatting properly. To test this, cut a couple of pages into a new Word file, clear and redo the formatting in Word, import the Word file into another RH project, and see what results you get.
To clear the formatting:
Select text.
On the Home tab, in the Font group, click Clear Formatting.
Redo the formatting, being careful to not format the spaces.
Good luck,
Leon

Missing spaces between words after importing Word document into RoboHelp HTML version 8

I created a 400+ page document in Word 2007 and imported it into RoboHelp 8 (HTML, not RoboHelp for Word). In many places, the space between a bold word and a non-bold word is no longer there. I would like to avoid having to go through the entire RH document to replace the spaces manually. Did I import incorrectly?

Looks perfect, works terribly...
Things to consider:
Chances are, the different treatments of the space are due to whether the space was included in the bolding of the word in MS Word.
Additionally, since Word files contain much underlying binary code (macros and such), your security settings might or might not be playing well with the Word stuff.
Are you importing the Word file from a network location, or from your local machine? Network traffic might be partially impacting the import, too.
Bottom line? You'll probably need to clear all formatting in the Word file and redo the formatting properly. To test this, cut a couple of pages into a new Word file, clear and redo the formatting in Word, import the Word file into another RH project, and see what results you get.
To clear the formatting:
Select text.
On the Home tab, in the Font group, click Clear Formatting.
Redo the formatting, being careful to not format the spaces.
Good luck,
Leon

Converting Word Document into Robohelp format

I am new at Robohelp and have been recently assigned a task to convert several Word documents into Robohelp using version 9 of RoboHelp. Can someone please direct me in the right direction (location, URL, tutorials etc.) to find some step-by-step help, it would be most appreciative

Hi Michael.
Rick asked that question because there IS a method of linking a Word file to a Robohelp project and bringing in any changes to them. It was designed exactly for the scenario where a SME or client writes the content and someone else just acts as a kind of content curator. However if you just want to import the Word file, this is fine also but you'll need to understand that once the content is in RoboHelp, the content would need to be changed in Robohelp.
There is a good tutorial on the benefits of both linking and importing over on Peter Grainge's website (see the link below). This is a very useful resource for all things RoboHelp and well worth bookmarking.
http://www.grainge.org/pages/authoring/importing/about_importing_linking.htm

Headings are getting bookmarked while importing word document to Robohelp 9

HI everyone. Easter wishes in advance.
I have a problem while importing word document to Robohelp.
Version - MS Word 2010
Robohelp 9
While I import word document to Robohelp after mapping styles, my heading styles are getting tagged as bookmarks in RH.
I have customized word template along with customized RH css.
How can I prevent the headings (all the heading level used in a document) getting tagged as bookmark after I import word docs to RH.
If there is no solution is there any solution to remove bookmarks at one go from RH.
Help would be greatly appreciated.
Thanks

The quickest way to resolve this is to create a new project and import a document that causes this problem. Zip up the project and document and send it to me via my site so that I can take a look.
You can strip out any confidential content and it only needs to be a document short enough to show the problem.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Importing Word Document into RH HTML

I'm trying to Import a Word Document into RoboHelp HTML and I
receive this message.
"Import Session Failed 0x80004005. "
What can I do to Import the document properly?

This is a permissions issue. Click
here for
information on how to fix this.

Hyperlinking across Word documents into RoboHelp

I hope this is in the right forum ...
I author documentation in Microsoft Word and then import into RoboHelp HTML (v11 & generating in the Multiscreen HTML5 layout).
I have multiple word documents and a lot of hyperlink in those word documents.
Some documents have hyperlinks that reference locations in different documents.
At the moment, when I import Word documents, the hyperlinks that reference locations in a different document break (dont work) which causes a great deal of work for me to find and fix.
Is it possible to have a hyperlink in Document A link to a spot in Document B and have it stil work after the documents have been imported?

In short, no there isn't Kate. When a Word file is imported, the content is built into one or more .HTM files. The link in the word file at the point it is converted may not know what file name will be created, especially if the referenced section comes after the link.

Re-importing word document into existing project

2. I imported a Word (Windows XP) doc to create my robohelp
project.
I am new to RoboHelp, so please bear with me...
I had imported a word document into a project for HTML Help.
I had mapped some IDs to create context sensitive help to work with
our application. When the word doc is updated and I re-import it,
the topics are duplicated in the TOC. (I normally get updates of
this document from another department and we need to convert it to
HMTL help for our application).
How do I fix this or prevent this from happening? (Other than
delete the old project, create a new project, and import updated
word document since I would have to remap all the IDs again.)
Thank you for your help.

Sorry, I have to disagree with your estimate, for the main
reason that all those reviewers will be manipulating the Word
document with their own formatting quirks, which will only serve to
corrupt the doc file and make its repeated importation increasingly
problematic.
Remember, you're looking to convert a binary file with tons
of macros into HTML code, essentially a flat text file. I suspect
that remapping the IDs will end up being the least of your problems
as you go further into repeated review cycles.
Good luck,
Leon

Importing Word Documents to RoboHelp 7 HTML

Hi,
We are using RoboHelp 7 HTML for our project requirements.
The approach we adopted is as follows -
1.) Develop content in MS Word 2003 with proper formatting
including the styles defined for tables, fonts, paragraphs, various
levels of headings etc. We will have high number of word documents
which need to be reviewed by the SMEs before putting them in
RoboHelp.
2.) Copy the content to RoboHelp. We are using the File >
Import > Word Document. We find the following issues in the word
documents thus imported -
a.) Formatting errors like the font of the numbered list is
not consistent. The numbers have a different font while the ontent
has a different font.
b.) The content in Tables is also not properly indented. It
touches the borders.
c.) Foreign characters are being introduced wherever
double-quotes are used. Eg: ”r;Other” (it should have
been "Other")
How do we address the above-listed issues? How do we get the
same output in RoboHelp as can be seen in the formatted word
document? Do you suggest any better alternative?
Thanks & Regards,
Anil

1] Yes. Non-RH users develop the content.
2a & 2b] What I have noticed is that the numbers appear
in Times New Roman while the content appears in Arial after
importing. As mentioned, we have lot of documentation (many word
documents). So each word doc I import, a CSS gets generated and
editing them itself is a herculean task. Is there any work around
this so that we can gain time and carry out the import smoothly?
2c] Could not find the patch in your website. One of your
posts says that it is Item 21. But cannot find any downloadable
link.
As suggested I tried reading the article in Printed
Documentation. But really didn't know which one you were referring
to.
Regards,
Anil

Error on Importing Word document into RH7

I am attempting to import Word docs into RoboHelp7. The first several documents are imported and saved into the project without incident. However, one file causes an error: "An error occurred while trying to save data to : <RH project name> <5>. The same error occurs each time I attempt to import this particular file; the error message will not disappear when I click on OK and whole project has to be closed. Thank you.

Colum,
Thank you for your prompt response. I tried importing sections of the word document as you suggested, but I was not able to isolate the error. I confess that after repeated errors and shutdowns, I discontinued this troubleshooting, lest it cause any damage to the original project files.
Instead, I opened a new project, and imported the Word doc into that project. Then I imported these HTML files into my main project. It was not graceful, but the end result is good, with all the links and formatting preserved.
As other Word docs have since been imported into this project without incident, perhaps it was a fluke/bug in this one document.
I appreciate your help in resolving the situation.
Thank you.
Mary Lyons
Knowledge Manager
Phone: 309.751.6179
This e-mail and any attachments may contain privileged and/or confidential information. This e-mail is intended solely for the use of the intended recipient. If you are not the intended recipient, you are hereby notified that any copying, distribution, dissemination or action taken in relation to the contents of this e-mail and any of its attachments is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify the sender immediately and permanently delete the original e-mail and any attachments and destroy any copies.

Error trying to import FrameMaker documents into RoboHelp 8

Using FrameMaker 9 and RoboHelp 8.0.0.203 (Adobe Technical Communication Suite 2) on Microsoft Vista (w/SP2) as administrator user. I get error when attempt to import a very simple FrameMaker 9 document (not book) into a RoboHelp 8 project. Attempted import using menu command File > Import > FrameMaker Document. Error (in dialog box with "RHUtils" as title) is:
Unable to install RoboHelp plugin for FrameMaker.
Please close FrameMaker and try again.
Verified with Windows Task Manager that FrameMaker is not running. Even get error when I reboot computer and RoboHelp is the only application started. Error occurs for all FrameMaker documents. Simplest test was a FrameMaker document with one heading and one body paragraph.
Searched knowledge base and found article rb_4416 ("Importing FrameMaker Files"), which advises that best way to import FrameMaker documents is to convert them to Microsoft Word format and import those files (!?). The article does not indicate which RoboHelp versions it applies to.

Thanks. It was a new project. I only recently installed RoboHelp 8 and am in the process of familiarizing myself with the new (for me) version. So it was not a production project that was involved. But it is a feature I can see using.
I will next contact Adobe technical support on this issue.

Issues with importing word docs into robohelp 10

I currently have an issue when I try to import a 'saved as: 97-2003' or 'MS Word' doc or docx into Robohelp 10, I receive the following error:
Any assistance with this would be appreciated.
In the meantime I've been converting everything from a doc/docx format to a pdf and then importing.
However, it would be nice to know why I can't perform the task as I have shared
PS...
With regards to the error statement: "Please install Microsoft Word 2000 or newer"? I have Microsoft Office 2013 installed (and not the student or home version). "I'm not the sharpest tool in the shed", so to speak but I would think that Word 2013 would pacify the requirement of MS Word 2000 or newer...?
Thanks.
Message was edited by: Words2Technology

The message is wrong in terms of the version specified. It is correct though that you do not have a supported version as Word 2013 is not supported.
Subject to licencing, you can have both 2010 and 2013 installed, then run 2010 before doing anything where Rh needs to talk to Word.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Unable to copy material or import Word Doc into RoboHelp 9 (Suite 3)?

I had this problem for awhile until I discovered that I was trying to import material from older word documents. Just opening the word doc in Office 10, saving it as a docx file before trying to copy and paste cleared this up. Pictures and text come across easily in RoboHelp 9 and Photoshop now.
PDF files are hit and miss. I think it may be due to the same type of problem... earlier version creation on the part of the PDF. sometimes they import great, just like they look in PDF format, sometimes they don't are are a big mess. I have had to copy and paste sections, recreating the look of the original pdf in a RoboHelp page.
Backwards compatability seems to be an issue that keeps cropping up in this suite... or am I doing something wrong, missed a simple control somewhere?

I think you mean Office 2010. Office 10 is Office 2002,
I'm not quite clear whether you mean import in the sense of File > Import or copy and paste as you refer to both. File > Import from older versions has not given me any problems. Cut and paste is not something I do much of but again it hasn't given me problems.
Cut and paste doesn't require any instructions. Importing is covered on my site.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Problems importing a Word doc into Robohelp HTML

I have a 116-page Word document with 13 chapters. When I
import this document into Robohelp HTML as a winhelp output file,
only two topics are created, rather than 13. On the Conversion
Options window, I select to have new topics created by Word style
"Heading 1" which are my chapter titles. Why doesn't Robohelp
create the topics, and what should I change to faciliate that?
Also, why don't my numbered lists from Word stay numbered in
Robohelp? Is there a way to automate numbered lists?

Thanks for your reply.
When I insert .gif files JDeveloper ends with a message saying "Process exited with exit code 0". I then go and check in the database and I find the image added to the table.
With a word doc, JDeveloper does not give that message. No message at all regarding what the status of the process is. And the document is not added to the database. No error messages too. Could this be an issue with Oracle?

Importing the word document in RoboHelp

Hi,
I am importing a word document into Robohelp 7 HTML. But after the import is completed, the entire word document is converted into a single HTML page. My requirement is that each chapter should be created into seperate HTML file based on the heading level. This will help in creating the book based on the heading level. I was able to do this task successfully with RoboHelp X5 but not with any other higher versions!!!!!

Hi there
The key to this is to ensure the Word document has been styled consistently with headings and other formatting. If it's one of the garden variety where folks just painted across text all willy nilly you will indeed see mixed results.
Pay careful attention to the intermediate dialogs you see when importing the document. The second one should offer a way to split on style.
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Importing Word documents into Robohelp 8: topic content is in a text box

Similar Messages

Maybe you are looking for