Importing xml driven swf file -- is it asking for too much?

I want to import an ActionScript3 / xml driven swf file into Catalist, but it only imports the swf file.
I have placed all the external images and the xml file that calls them into the same folder as the swf and the catalist files, but the playback still does not work. It shows error messages when trying to run. Copying the files to Assets/ Media or Images folders also makes no difference...There is no way in Catalyst to reconnect the xml to the swf either...
Why can't Flash and Catalyst be more friendly? Will there be a better connectivity in the final version?

Hello there,
There are several reasons why this wouldn't work, especially during preview. I'd like to ask you a couple questions and have you try a couple things.
1. What file path are you saving your project to, and what location did you copy the XML and image files to?
2. Did you try publishing your project, and copying your additional files to the published locations?
3. Did you try the same steps as above, only using the deploy-to-web version posted on your server? You would load the application by going to your web browser and typing something like: http://yourserverhere.com/.../deploy-to-web/Main.html.
Let me know if any of those work. Because Catalyst cleans the space where preview files are kept, it would be difficult to have your scenario work during preview. However, you could probably get it to work in a published version.

Similar Messages

SWPM asks for too much space at installation

Hello,
I'm trying to install ECC 6.0 EHP 7 SR1 with the most up to date SWMP on Windows with MaxDB.
At the step "Install Instance basics of ASCS01" the system raises the following error
"There is not enogh available space in 'F:/'. There are 143118 MB available. The required space is 230400 MB."
F:\ is the future backup partition, so I didn't put anything there.
My question: Where does the vale 230400 MB come from? Do I have a chance to change it during the installation?
Your help is very much appreciated.

Hi Julian,
For installation of ERP 6.0 EHP7 with MaxDB database you may require DB space of around 230 GB.
This is derived based on the export DVDs used for the installation and this cannot be changed.
Please ensure enough space exists in the Drive used for installation.
Hope this helps.
Regards,
Deepak Kori

Can you play/view swf files on adobe air for android?

Hi, yes; I'm new here, as well as to Adobe Air, and I'm still trying to learn the ropes around here, and I apologize in advance if this has already been asked, or I have placed this question in the wrong forum.
The thing is, I was wondering if it was possible to play my SWF files via adobe air for android; and if so, how? Thanks in advance either way.

Can you please give directions where can i clear that cash.
Anyway i don`t think its the case, because this is first time i hooked phone to internet, and first time i launched Android app store.
Edit:
I went to https://market.android.com and there is Adobe air app. But when i try to download it says that my device doesn't support it (Samsung Galaxy GT-I5500) By default it comes with android 2.1 and doesn't support Adobe air, but i upgraded firmware to 2.2.
Maybe that is the reason it doesn't show me Adobe AIR in app store - based on my phone, not my Android version ?

Why can't i print a pdf file, it's asking for a password and i have no idea what it is it's never asked me before?

why can't I print a pdf file, it's asking for a password and I have no idea what it is it never asked for one before?

Good afternoon SaraThanks for responding. Yes, I have been able to open these files before without a password. Funny thing is it is happening on both my husband's laptop as well as mine. I'd appreciate any help you could give me but the file is very personal. So, if you can assist in a way that won't compromise the security I would be grateful for your help.Thanks and have a great day!Kim Morse

My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password" and my AppleID and password do not work

My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password" and my AppleID and password do not work.

thats because audible isnt apple provided, its a third party app/website so you'll have to get it from them

I am trying to import an mp3 audio file into garage band for editing. drag and drop doesn't work. What now?

I am trying to import an mp3 audio file into garage band for editing. Drag and drop does not work. any ideas?

Try reposting in the Garageband forums. You can find it at:
https://discussions.apple.com/community/ilife/garageband

How to import a flash swf file in premier. Without loosing the animation of the movie symbols.

HEEELLPPP!!
I am doing animations in flash... and then putting them in premier as a SWF file..
but when I do that, the animation does not work properly..
example : If its a star that spins, and goes from left to right.
When I put the swf file in premier.. the star only goes from left to right.. without the spin...
(the spin was an animation made inside the movie symbol of the star)
from the forum of flash they send me here.

from the Premiere Pro Help section about importing SWF files:
" Interactive content and scripted animation are not retained. Animation defined by keyframes in the main, top-level movie is retained."

Best way to import a Camtasia .SWF File?

I recently created a screen tutorial (as an .swf file) using
Camtasia Studio 5 and would like to import the .swf I created into
a topic of a Flash Web project I'm working on. I tried putting the
.swf on in an .htm but RoboHelp crashes. It doesn't crash with
other .swf files, but on this one it does.
The file plays fine if I double-click on the .swf inside
Windows Explorer, so it seems a problem with RoboHelp.
Now, I can get the video to work inside the project if I copy
the .swf file, the .js file, and the swf's .htm file manually copy
the project folder. If I preveiw it CTRL + W at this point it
works. If I build the project, the .swf and .htm (because I copied
them manually) don't get included into the single source layout
folder. I can probably add them manually there too and then
publish, but there has to be a better way.
Anyone have any success with importing Camtasia .swf files
into RH7 and could maybe give me some pointers so i don't have to
manually copy files everywhere?

Hi Jared
You probably simply need to add all the related files to your
Baggage Files folder.
Note that if your output is a .CHM file, I believe that
Camtasia files have a problem with running inside a .CHM. Even if
you add all the files.
Cheers... Rick

Cp5 very slow to import even tiny SWF files

I am using Captivate 5.0.2 on 64-bit Windows 7
All was fine until recently, having not used Cp5 for a few weeks, I fired it up and tried importing a SWF file to a slide (a tiny SWF file that had been imported before with no problem, i.e. AS3, nothing fancy just text and images and a bit of animation). However, this time Captivate decided it's going to take an age to import it (2-3 minutes). Captivate says it's not responding, and the window gets greyed/faded out. Eventually it comes back to life and all is well. But it IS very, very annoying when you have several SWFs to import.
This is not limited to the one SWF file, it's every SWF file or widget (even the ones that come with Cp5) that I try to import (even a simple SWF with nothing in it), so it's definitely not the SWF itself causing this.
Things I have tried:
     - Clearing Captivate cache
     - Deleting preferences in \Users\<user>\AppData\Local\Adobe
     - Uninstalling and re-installing
Nothing has worked.
Several of my colleagues have identical machines and the same version of Captivate and everything is fine for them.

I think I have isolated it to a new Intel HD graphics driver. Unfortunately I don't think I can roll that back to the previous version. Anybody else getting problems with Intel graphics drivers (I've seen some nVidia issues).
EDIT: false alarm, it's nothing to do with the driver.
Message was edited by: MarkBPP

Help with load xml driven swf in another swf

Hello people ... (sorry for my Google transalte English)
... I am desperate, tapping in place last week.
In fact, i make flash CD presentation in Adobe Flash CS5 AS2 (with minimal use of ActionScript). It occurs to me the next problem ... need to load flash image gallery that i already have created, in new presentation file. Gallery was created in Flash Slideshow maker and as products I have. Swf,. Xml and folders with thumbnails and picture (no. Fla file).
The concept of the presentation (as root is concerned) should look like in uploaded picture "izgled otvorenog cd-a". In each of the folder on cd presentation (as on picture) is a Flash presentation controlled by their xml file whose name I must not change. Exe file "Prezentacija 2011" is a presentation (Flash Projector) that i try to make. In the same presentation i create frames and for each of the frames added action:
loadMovie ("02_Kapije/kapije.swf", "kapije_ucitavanje");
kapije_ucitavanje._x = 23;
kapije_ucitavanje._y = 167;
stop ();
(Of course, for each item varies loadMovie root and instance name).
The problem is that presentations can't find xml file, apparently because they do not have the appropriate root. When all the files of the one gallery set in the same folder with the "Presentation 2011.exe" file, everything works normally ( however, as i said, i cannot change the name of Xml file and that disturb the concept of my CD presentation).
How can I drive loaded swf file from the above script to use Xml file in its folder?
HELP PLEASE!!!
P.S. ...and it looks so easy

you're welcome.
p.s. please mark helpful/correct responses.

Embedding swf files in AIR app for ios

Hi,
After going through a lot of articles already available, I found answers with varying views on the following questions:-
1) Can we embed swf files using the embed tag in air app for ios, with symbols exported ?
Something like [Embed(source="someSWF",symbol="exportedSymbol")]
and also something like [Embed(source="someSWF")].
From what I understand, one can't embed swf's with actionscript byte code in them. So exporting symbols actually creates class linkages which leads to creation of abc. But I'm unsure on this because some sources say otherwise.
2) Can we embed swf files using embed tag in air app for ios, without symbols exported ?
Something like [Embed(source="someSWF")]
and also something like [Embed(source="someSWF" mimeType = "application/octet-stream")]
I read somewhere else, that you can actually embed symbols separately by providing symbol tag in embed tag but not entire swf (which leads to uncompiled actionscript error) but not sure about this as this is contradictory to finding #1.
3) If #2 is possible, then do embedding two different swfs with same symbol names would cause a conflict and result in #3747 error ?
Please note I am not asking about the Loader class here but using the Embed keyword for embedding swfs.
Also do the results differ with AIRSDK 3.8 and 3.9 and using different swf-version in compiler flags ?
In our application we started getting error #3747 in class creation of one of the embedded swfs (like new EmbeddedClass()) when we changed from swf-version 17 to 21 using AIRSDK 3.8. So was this error not there earlier or it was there but swf-version was suppressing it ?
Any help is much appreciated.
Thanks!

I am fairly sure that the answer to your questions is: “no”.
For embed to work the AIR app would have to be working in interpreter mode, and that can work for local testing, but can’t work for submitting apps. An easy change for you to do would be to use SWCs instead of Embed. Other than that you’re looking at Loader, but also a tricky command line build of the app.

Embed .swf file or how to hide your .swf file on the web for protection

Hi, is it possible to hide your .swf file so that it can not be taken. Is there a way to protect it? if someone please post the chain of commands on how to do this.

http://www.google.co.in/#hl=en&source=hp&q=swf+encryption+software&oq=swf+encryption&aq=2v &aqi=g2g-v8&aql=&gs_sm=e&gs_upl=848l6367l0l9310l22l20l3l2l2l0l324l3334l1.4.7.3l15&bav=on.2 ,or.r_gc.r_pw.&fp=bdf9e41683b1cd0a&biw=1024&bih=609

.SWF files usage in Catalog for B2B Webshop Display

Hi All,
We are on CRM 5.0, We have a requirement to upload .swf or flash file in catalog and to display on the Webshop Home page.
so far we are using .jpg file,we have not used .swf in E-commerce, does anyone has an idea if we can use .swf file in catalog to display on the B2B Webshop.
Is it supported or not?
Please provide your valid Inputs on this, are there any prerequisites for this functionality to work like if additional configuration is required and what are those steps? .
Thanks in advance.
Thanks&Regards,
Sri

Webshop welcome page
Using the OBJECT or EMBED tags in the JSP you should be able to embed the shockwave or flash files in any JSP. The content being a static file residing in the mime server defined in XCM and can be relatively addressed using ISA tags like MimeURL. Example: <isa:mimeURL name=u2018welcomeMovie.swfu2019 />
Catalog
Pretty same technique to render, but need to be indexed for the right target object - catalog area / subarea or the catalog item.
(1) You maintain the document classes / types that can be assigned to a catalog area and/or item in the Customizing
(2) CRM IMG: SAP NetWeaver -> Application Server -> Basis Services -> ArchiveLink -> Basic Customizing -> Edit Document Classes).
(3) Insert SWF document class of Mime type application/x-shockwave-flash if not defined already.
(4)CRM IMG: SAP NetWeaver -> Application Server -> Basis Services -> ArchiveLink -> Basic Customizing -> Edit Document Types)
(5) Insert new Document types like ECO_SWF for SWF mime type.
(6) Web shop templates must be adapted to visualize new documents within the Web shop.
(7) Define templates for folders: SPRO: CRM -> Basic Functions -> Content Management -> Define Templates for Folders. Select the area you defined in your Catalog type and add the Document type you have defined above.
(8) Add a new folder ECO_SWF. Select properties and assign the new document type ECO_SWF to
the attribute document type.
In the JSP for product details, you can use isa:imageAttribute tag with its key value used in the above configuration for document types (ECO_SWFA) and embed them as you would do for a flash movie in HTML.
u2018<isa:imageAttribute guids=u2018DOC_PC_ECO_SWF,DOC_P_ECO_SWFu2019
name=u2018webCatItemu2019 / >u2018 width=500
height=400 >
where webCatItem is the current catalog item (WebCatItem) in the particular JSP.
For help, you can refer to example 6 in the "SAP E-Commerce 7.0: Examples and Tutorials"

Write to measurement file will not ask for file name once as selected.

When using the Write to Measurement file Express VI. I select "Ask user to choose file" and "Ask only once" with the intention that the data from each iteration simply be appended to the chosen file.
I select "Run continuous" and the VI asks for me to choose a file repeatedly anyway instead of just appending the first file. Selecting "Write to one file" properly appends data to the file specified in the box.
Am I doing something wrong?

DianeS wrote:
Personally I can't figure out why that particular button even exists (I'm told it's occasionally useful for debugging).
I find it useful if I am creating a subVI that is supposed to be a part of another VI. No while, loop just some inputs and outputs as a function. If I want to test it out stand alone and try a variety of inputs, then Run Continuous and change the inputs, then I see immediate feedback on the outputs. Once I'm satisfied its working right, then there is no need to clean up. Just save it and drop it in the large VI as a subVI.
Beyond that, I see no need for Run Continuous.

Open link in a new window in XML feeding SWF file

Current XML link code is:
<div><a href='#'>Diamonds</a></div>
<div class='submenu'>
<div><a href='http://www.gabrielny.com/gabriel.php'>Earrings and necklaces</a></div>
Will it open in a new window if I just add target= '_blank' with single quotes in the XML file?
Like <a href='http://www.gabrielny.com/gabriel.php' target= '_blank'>Earrings and necklaces</a>
Menu is same as on http://www.peattiecapital.com/
Thanks as ever.

My proposed link code in XML file worked just fine.

Importing xml driven swf file -- is it asking for too much?

Similar Messages

Maybe you are looking for