Importing XML, XML disappears when FCPX is closed and reopened.

I am attempting to use 7 to X to bring in an FCP7 project into FCPX. It works (remarkebly well I might add) and I can work on my project and everything normally. However, if I close FCPX for the day and open it again, the Project created from the XML is nowhere to be found. I have not found anything on this anywhere online.
Anyone?
thnx.

7toX doesn't create a project. It creates a compound clip which should be in your event. You should copy of the contents of the compound into a project.

Similar Messages

Imported XML disappearing when updating

Hi,
I've got a brochure that imports multiple XML files. I'm having an issue where I update the XML link and it either changes which frame the element is tagged to or deletes it altogether...
What would cause this to happen? Below are the settings I currently use when importing the XML.
I'm still fairly new to using XML files so am guessing it's a poor error on my behalf but any guidance would be great.
Cheers

As an expedient answer before I jet out, download and work with the following assets:
http://www.adobe.com/devnet/digitalpublishingsuite/articles/using-xml-to-automate-producti on-of-digital-publications.html
There is a sample file (a ZIP) at the upper right of the page. It's a good example of how this should work for your purposes.
Mike

Often when Firefox is closed and reopened ALL the tabs and tab groups are missising. FIX!!!!

For reasons that are unclear to me I sometimes close Firefox and later re-open it. In some cases ALL the tabs and tab groups are gone. Today it opened in MSN.com and ALL tabs were gone. I put a lot of pages on these and have NO WAY to find them all again. If this continues and you cannot give me a way to recall them I simply will have to go to another browser. It always happens when I need them most and don't have time to even track down one. It completely upsets my day, week, month whatever!!!.
Is there a way to get them back? Someone asked a similar question and was never given a useful answer.

I've begun having this problem as well. Reviewing the above, I seen no errors that I' making. A few weeks ago, without being aware of an update to Firefox, it began behaving differently than it has for years. I've always had it set to open to an empty tab, now it often opens to the 'Firefox Home Page' (which I've never used)... this despite resetting my opening page to "Show my windows and tabs from last time" (upon troubleshooting the 'home page issue' I found that the opening page had reset to FF Home somehow. I store a lot of pages in tab groups and having them disappear is a major bummer since they're news articles I'm waiting to copy.
Also... I run CCleaner weekly and I know that will erase the group tabs I've stored so before running it I have to store those URL's another way. Does anyone know what I can uncheck in CCleaner to keep those tabs?
Thanks.

My cookies disappear when I close Firefox and reopen it. This started about two days ago. Even my Yahoo mail now forces me to login every time. Prior to this, it would retain the login and password for two weeks. What is causing this?

My bank (ING) has cookies that retain my login. Without the login, I have to answer the challenge questions every time. I am not set for private browsing and I have accept cookies from third party sites and until they expire.

As a follow up, I've discovered that this is happening in IE on the same websites. When I log into a different computer and test the same scenarios, the cookies do not disappear. It seems to be a problem on my computer. However, if anyone knows how to fix this, I'd be glad to hear it.

PMS color changes to CMYK when file is closed and reopened

I got a .psb-document with a adjustmentlayer>solid color as a background. The color is a Pantone 354-C. When I save my document (CMYK), and then reopen it, I no longer get the Pantone color library but the default color picker box. I see no visible change in color though so I'm not sure if the color changes. If I click the color library button in my adjustment layer, it automatically pics the PMS color beneth the 354-C (that is 355 C) and I see a change in color. So I have to repick 354-C again.
Anyone knows what's going on here?

Spot Colors have no real connection to individual Layers in Photoshop (as of CS6).
If you want to use them you need to employ Spot Channels.
Edit: And your intended color is probably simply out of gamut for that color space.

When closing and reopening, my tabs aren't restoring like the once did. My history is only keeping one day. Need to know how to change these settings.

When closing and reopening Firefox, my tabs aren't restoring like they once did. I used to have all my tabs restore each time I opened Firefox. Now it starts with one fresh new tab and all my others are lost. I do a lot of research so this is important.
My history is only displaying one day even though I have never changed my settings even after I updated it last year.
Need to know how to restore these settings.
***OH! special note: I can't use the recently closed tabs or recently closed windows because its a grayed out option****

Are you using cleanup software like CCleaner?
If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
* http://kb.mozillazine.org/Session_Restore
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Artboards disappear after closing and reopening a file

My coworkers and I have been running into an issue when we use documents that have multiple artboards. After we do ouer work, we save and close the file. When we go to reopen the file, all but the first artboard have disappeared. Looking in the Artboard panel, the original artboard counts up after every save.
For example, say I were to create a new file and add a couple artboards. After saving, closing, and reopening the file, the additional artboards would be gone, the artwork on those boards would still be there, and the original artboard would be labeled as "Artboard 2". If I were to add the missing artboards again, the same issue would occur and reopening the file would have the first artboards labeled now as "Artboard 3".
I am using Illustrator CS6 and saving the files as an .ai with the default settings.

Are you saving locally? Over a network? Mac or PC?

How do i get a folio to default to the cover page when the app is closed and reopened.

The folio i'm making is for a 'show and tell' sort of thing, it needs to be quite linear so has top start from the cover every time it's opened and then be read through. I know it's as easy as just using nav to return to cover but the people i'm making this for have 0 knowledge and 0 willingness to learn therefore i'd like the folio to reset to the cover page whenever the content viewer is closed and reopened.
I had it working on a previous iteration but on my latest version it remembers what page i'm on when I reopen the viewer (logical and handy I know but not in this instance).
Any help would be greatly appreciated.

There is no way to do this automatically.
Neil

When I use dynamic link how do I continue using it after closing and reopening a project?

Hi
Im very new to AF
I cant seem to find the answer to this in any tutorials.
When I using dynamic link, how do I continue using it after closing and reopening a perm pro project?
Thanks
Philip

Hi Kevin
Thank you very much for such a quick reply.
I actually figured it out. As usual it was fairly obvious solution.
I opened both project at the same time.
Thanks again and sorry for waisting your time.
R
Philip

My iPad says that she is busy and is unable to accept my request even when everything is closed and nothing is being used. What might be the problem here?

My iPad says that she is busy and is unable to accept my request even when everything is closed and nothing is being used. What might be the problem here? 3 times my iPad has crashed while nothing was open or running and a small loading wheel would be moving signifying that the thing was loading something without permission. Even when the dang thing was on my personal wireless service that I pay for.

similar to what is happening to me....the difference is, after restoring itunes detect ipod and ask to restore again and again....
I know it may look kinda stupid but: just leave the ipod there for about 2 minutes, that's about the time my itunes is taking to detect my ipod...if it doesn't work, try connecting ur ipod to other computer with itunes (no need to sync, just to check if itunes will recognize) to check if the problem is with the ipod or with the itunes and/or computer.

My space bar has disappeared when I open safari, and has been replaced by other keys. I don't understand why?

My space bar has disappeared when I open safari and been replaced by other keys, does anyone know how this happened?

When you tap in the address field to type the web address, another keyboard pops up without the space bar as no spaces are need when typing the web address. Just tap anywhere on the screen or on the keyboard icon in the lower right corner and the keyboard will go away.
Message was edited by: Demo

Front Panel objects do not stay in place after saving, closing, and reopening the VI.

I have been working with a couple of versions of a main VI. The original VI was given to me so that I could add additional functionalities to it. I had been designing the front panel of the latest version of the VI on a Dell laptop running Windows 7 and LabView 2011 SP1 using a monitor with a resolution of 1920x1080. My booleans, numerics, and plots on the front panel had always stayed in place after saving, closing, and reopening the VI. Once in the field, I connected my laptop to a cRIO9073 and used my laptop screen with a resolution of 1366x768 to operate the VI. I made some changes to the VI, saved it, and reopened it. This time I noticed that the front panel objects had become overlapped, resized, and generally rearranged. I tried fixing the objects but I noticed that they reverted back to the incorrect positions after saving and reopening the VI. I was successful in keeping the objects in position a couple of times, but when I would open the VI at a later time, the objects were again rearranged. This is happening on both my monitor and laptop screen. The original version of the VI, however, does not behave this way and I have opened it on both my monitor and laptop screen. In this version, the front panel objects always stay in place. Both VI's have the same window size properties. Could I have corrupted the latest version of my VI somehow? Below are screenshots of the front panels of both VI's.
Attachments:
Blender Controller Original.PNG ‏140 KB
Blender Controller.PNG ‏203 KB

Hi Miguel,
It is possible to programmatically set or change the position of front panel objects. (for example: http://digital.ni.com/public.nsf/allkb/4D0DA06B43195B3F862572F3000AF2D3?OpenDocument) However, if you haven’t intentionally done that, it seems unlikely that it is the problem.
Have you tried copying the entire block diagram in to a new VI to see if the problem persists? While it is unlikely, you are right that it is possible for VIs to become corrupted. I’ve never heard of a situation like this except in the situation where the settings Tom had you check have been changed. Here is some information about those settings:
http://digital.ni.com/public.nsf/allkb/7567EF257B9CFDF986256F630073228F?OpenDocument
Since there was no rearrangement when you copied the front panel to a new VI, you might try copying the block diagram a little bit at a time to see if there is some particular part of it that creates the problem somehow.
K. Johnson

Why does Firefox keep me logged into websites after closing and reopening the browser?

As of today, Firefox has been behaving differently. Namely, when I close Firefox and reopen, I am still logged in to email and other sites. I have all of my privacy settings checked, such as clear history, offline data, form history, etc etc so that they all will be deleted upon closing but this has no effect. Can someone provide insight as to why this is happening and how I can correct it? Before today, after closing and reopening the browser I was required to log in to any sites requiring UN and PW.
I have rechecked all history deletion options to make sure all the appropriate ones were selected. Yesterday, I noticed inbox.com and a program called 24x7 Help were installed on the computer, without my knowledge. I promptly uninstalled them,but I'm not sure if they could somehow be responsible for the odd behavior.

Such a behavior indicates that you keep the cookie(s) that verify that you are logged on to a web server.
Are you using session restore to open those tabs automatically?
* Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
You can set the <b>browser.sessionstore.privacy_level</b> pref to 2 (never) or 1 (non-HTTPS, default in Firefox 3 versions) on the <b>about:config</b> page to disable saving cookies via session restore.
You can change the browser.sessionstore.privacy_level_deferred pref that is used when you do not reopen the previous session automatically via "Show my windows and tabs from last time".
* http://kb.mozillazine.org/browser.sessionstore.privacy_level
*http://kb.mozillazine.org/about:config

After installing Firefox 5, why, after closing and reopening the programme, do I seem to have lost most of the new features?

After installing Firefox 5, replacing my previous version (4.5), I could see the new features. However, having closed and reopened Firefox, it seems as though it has reverted to the previous version, even though 'Help - About' says I'm running on version 5.0.
I had to download 5.0 from the Mozilla website, as I tried to update via the update tool in 4.5, but it claimed I was fully up to date, even though I have 5.0 on another machine (which works perfectly).

Can you please describe the "new features" that you saw first time you opened Firefox 5?
Thank you.

I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.

I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.

A Safe Mode boot might help ..
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
See if the problem persists.

Importing XML, XML disappears when FCPX is closed and reopened.

Similar Messages

Maybe you are looking for