Imports from iPhoto Are Cropped

All of the pictures I am importing from iPhoto to iMovie end up being cropped so heads are being cut off when viewed on iMovie

Duh..I found it under photo settings. It was set to enlarge all imported photos. Never mind.

Similar Messages

  • Failed import from iPhoto to Aperture - what's the best solution?

    Hello
    After some years of using iPhoto I recently upgraded to Aperture 3.2.2.  In connection with that and before opening Aperture, I bought a new external hard drive and moved my iPhoto library to it, following Apple's instructions on how to move an iPhoto library to a different drive.
    When I opened Aperture and was given the option to import my iPhoto library (of some 30,000 images), I chose, because I thought it was safer, to allow Aperture to access the images in my iPhoto library as referenced images rather than to store them in the Aperture library. 
    Unfortunately, the import was incomplete.  I decided to try to import again, in the same way, to see if that would result in my having all of the iPhoto images.  The re-import was also incomplete.  Worse than that, although I had told Aperture not to import duplicates, it imported for a second time many of the images that it imported the first time.  I now have in Aperture two separate large but incomplete iPhoto libraries.
    After this, I learned that before using an external drive with Aperture I should have formatted it to Mac OS Extended, which I had not done.  Other research I have done suggests that a surprising number of people have significant problems in trying to move iPhoto libraries to Aperture, but I have not found a case that addresses my problem.
    My idea now, subject to any advice anyone can give me, is to move the iPhoto library back to the Mac's hard drive (there is enough room, but little spare), delete everything on the external drive, format the external drive to Mac OS Extended, re-organise some of the iPhoto events, 'delete' the 'contents' of the Aperture library (without affecting of course the contents of the iPhoto library) and try again (possibly by importing the iPhotos this time on an event by event basis).
    Is this a good idea?  If so, I would be grateful for any suggestions about how to take these steps.  In particular, the step of deleting the contents of the Aperture library without affecting the iPhoto library.  Are there other better ideas?  If so, what?
    Thanks very much in advance for any help anyone can offer.

    My idea now, subject to any advice anyone can give me, is to move the iPhoto library back to the Mac's hard drive (there is enough room, but little spare), delete everything on the external drive, format the external drive to Mac OS Extended, re-organise some of the iPhoto events, 'delete' the 'contents' of the Aperture library (without affecting of course the contents of the iPhoto library) and try again (possibly by importing the iPhotos this time on an event by event basis).
    If there is nothing in your Aperture library that you need to keep, that is a good strategy.
    But some suggestions:
    Before you move your iPhoto Library from its current location (which will render the Aperture library useless, because it is referencing inside iPhoto), check if you accidentally have imported any images as managed into Aperture: create a smart album with the rule "File status is managed" at the top level of the library albums. This way you will see, if you have any images only in Aperture, that need exporting, before you delete the library.
    Also right now the best option to import from iPhoto into Aperture is by importing complete libraries, not single iPhoto events or albums. If you import Libraries, Aperture can combine the iPhoto Originals and the edited versions into "Master-Version" pairs and save considerable space. This is only possible by importing the complete library, for more deatails see this recent thread:
    Correct Answer Re: Aperture Loses iPhoto Edited Images
    I advise against referencing the masters inside iPhoto, for it is risky. If you open iPhoto and accidentally edit or modify the referenced master in any way, then the reference will be broken. It would be safer by far to create a backup copy of your iPhoto Library and to import the image files into Aperture or to relocate the imported files as referenced masters somewhere else, after you imported them.
    Post back, if you have more questions.
    Regards
    Léonie

  • Importing from iPhoto into Elements 11 Organizer

    When I click Import in Elements 11 Organizer and choose the iPhoto option I do not get the "Import from iPhoto" dialog box that allows you choices of what you would like to import. Instead, the program immediately begins importing all the photos that I have in iPhoto.  How do I get the dialog box to come up so I can make choices of what I would like to import?

    You are right, that is how it works.  However, I am looking at a figure on page 36 of the Adobe "Classroom in a Book" training workbook that shows an iPhoto dialog box where you can make choices.  Wonder where that figure came from.  After seeing it, I thought maybe I had missed making a preference setting somewhere along the line.  Thanks for your response.

  • Importing from iPhoto to aperture results in having 2 of the same pictures?

    When I import my RAW photos from iPhoto 09' to my aperture library, I get two same photos that are stacked together. One is of a JPEG of my RAW (probably created my iPhoto) and the other is my original RAW file. How do I solve this problem? I just want my RAW files in aperture.

    Hi, Thanks for the reply. Just installed Aperture 3 and saw the dual photo import from iPhoto. Makes sense what you note about any modifications/adjustments in iPhoto transfer over to Aperture. I just attempted an export to Aperture; choose iPhoto, File, then Export. The window opens and initial shows export local to be Desktop. I choose Applications, then cursor down. Aperture is gray, and will not let me export to Aperture. I'm probably missing something here, any ideas.
    Thanks

  • Missing faces/places after event import from iPhoto to A3

    Hello,
    I am interested in switching from iPhoto 09 (8.1.1) to Aperture 3. I downloaded the Trial Version yesterday evening. I have a very big iPhoto library (28.000+ pictures) and I did not want to import all of them right now. I wanted just a few events in A3 to play around with it.
    I imported 3 different events into A3 via File - Import - Show iPhoto Browser. I selected the 3 events and put them per drag & drop into project. The few pictures were imported really quickly but I have some problems afterwards.
    1. All the pictures are missing the faces and places which I assigned them in iPhoto.
    2. Except the pictures taken with the iPhone - they had the places assigned to them.
    3. I do not have any issues with the keywords. They are all there.
    First I though I made a mistake somewhere. So I tried this at my OneToOne at the Apple Store today. We did the same thing on their iMac and had the same issues. After importing an event we were missing the places and faces.
    When I got home I created a new user on my MacBook and tried the same thing with that user account. I created a new iPhoto library (with a few pictures in it) and a new A3 library. I imported pictures with assigned faces and places and some pictures taken with the iPhone as well.
    Every time I import a few events A3 does the same thing:
    ~ It imports the different events into different albums in one project.
    ~ All the photos taken with the iPhone will keep the places pin.
    ~ All other photos will loose their places pin.
    ~ All imported photos will loose their faces names.
    ~ All pictures will keep their keywords.
    Does anybody else have this problem? Any ideas?

    I'm having a similar problem with missing Places after importing from iPhoto 09 to A3.
    After scratching my head over it, I created a new account on my Mac, imported some pictures from my camera and iPhone, and did some tests with Places. Here's what I figured out:
    To retain the Faces and Places information from iPhoto, you need to use Aperture's
    File-->Import-->iPhoto Library...
    command, not the
    File-->Import-->Show iPhoto Browser...
    command.
    My testing indicates that Faces were imported successfully, but Places are imported with caveats:
    Places data was correctly imported for the following cases:
    1. iPhone pictures with embedded GPS location.
    2. Pictures whose Places location was assigned with the Paste Location feature in iPhoto.
    3. Pictures whose location was individually assigned with the i (information) button and then manually searched for in the Places map.
    Places data was NOT imported when the location was assigned to the entire Event in iPhoto. That is, rather than assigning locations to individual photos, I assigned a location to the entire Event, then that location information was NOT successfully imported into Aperture.
    I have reported this as a bug to Apple. I hope this helps clarify the behavior for you.
    ...David

  • Can't Import from iphoto

    Today I was attempting to import from iphoto and a message window popped up stating,
    "Invalid I photo Library" Importing library versions earlier than iphoto 6.0.6 are not supported. Please upgrade your iphoto library.
    I believe I have the latest version, Iphoto 09 version 8.1.1. It was all working fine yesterday. Is it time to call Apple care?
    27" imac SL 10.6.2
    Any help or ideas will be greatly appreciated.
    Jeff

    Your problem with iPhoto is seems like an issue with some library corruption. +In iPhoto+ Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    As to the licencing issue:
    Aperture can be installed on two machines but can only be used on one at a time. You asked the salesman ""Can I run the already purchased app on the new mac?" and you can, but not legally. You don't have to purchase another licence, you can simply remove Aperture from one of the other machines.
    Regards
    TD

  • Does anybody know why I get doubles of every image I import from iPhoto 11 to Aperture?

    With the upcoming demise of the MobileMe Galleries, I'm making lots of changes to how photos are organized. I'm moving the galleries to a new host. But, I want to pull most of the events, etc from iPhoto 11 to Aperture. iPhoto 11 has been a nightmare to me, and I just want to be done with it. I find that when I import albums from iPhoto to Aperture, I'm getting doubles of every single image. I've set Aperture not to import duplicates, and messed around in other ways, but it's still requiring a LOT of time to delete all these duplicates. Anybody have an idea to fix this?

    There's nothing broken and nothing to be fixed. When you migrate from iPhoto to Aperture it imports all the versions - Masters and previews - to the Aperture Library. This is so your migration is lossless.
    When you import from iPhoto to Aperture you'll note the versions are tagged 'iPhoto original', 'iPhoto edited' etc so this means it's simple to find the versions in Aperture and delete the ones you might not want.
    Regards
    TD

  • Dates does not follow import from iPhoto

    Hi!
    I wanted to learn Aperture 3 so I imported my iPhoto library with a couple of Events and stuff, but when I got going I noticed that tha date of every picture I imported was set to 2001-01-01 01:00:00. But when I import them from Photo Stream the dates are right.
    Why did this happen, and is there any way to fix it? It took a long time to import the library, so I don't wan't to try that as a first option...
    Thanks!

    I also observed this problem on some images imported from iPhoto. In all cases the the date has already been wrong in iPhoto after upgrading the iPhoto library to version 9.3.2. And when importing to Aperture the wrong date was transferred.
    The problem (with the images I inspected) was, that the edited versions show the wrong capture date, not the original (master) image files. The originals have the correct capture date in the EXIF information.
    In my Aperture library I recovered the date by collecting all images with the wrong date in a smart album, selectig them and using the "Photos > New version from Original" command.
    The new versions all had the correct date.
    BTW: For my images the date was not 2001, but 1901 - more than a hundred years off I only saw this in Aperture in the "Date created" Exif tag, not in the "Date" tag. iPhoto is showing the full year 1901.
    Regards
    Léonie

  • Importing from iphoto, always get "import failed".

    I am trying to move my pictures from iphoto to elements.
    I "import from files and folders" and choose import from iphoto.
    I have 87,0000 pictures.
    It fails saying "import failed".
    I check the disk, and the files are there but no pictures in the catalog.
    I try to remove the files that it says are damaged.  I have done that.  I still get "import failed" with no report of why.
    I see many other posts with this same issue, and no good solution.
    I tried to create a new catalog, no difference.
    Help!
    Mac OS X
    Elements 12.0
    I have had Elements for the mac for 3 months now and still can't use it!

    I did the "from iPhoto" and got the problem listed above.  I want the whole library transferred.
    I am looking for a solution to the elements defect listed above.  If I import the library, and it has a problem with a single photo, it should not import that photo, but do the rest.  It is not doing that, it is failing and not importing anything.
    This is especially frustrating since it take hours to import the library, then when it is 95% done, it fails and imports nothing.

  • RAW JPEG PROBLEM  I'm new to Aperture and neglected to mark RAW JPEG pairs when I imported (from iPhoto).  Now I have two images for each photo.  Help!!  How can I change this?

    I’m new to Aperture and neglected to mark RAW+JPEG pairs when I imported (from iPhoto).  Now I have two images for each photo.  Help!!  How can I change this?

    How did you import from iPhoto? If you saw the Import panel with raw -jpeg pairs, then you probably did not import your iPhoto library as library, but as files, and then you will see plenty of duplicates - previews, thumbnails, originls, edited versions. If that should be the case, it would be better to delete the import from iPhoto and to import your iPhoto library again, but this time using "File > Import > Library".
    Only that would require compatible versions of iPhoto and Aperture.  What are your Aperture and iPhoto version numbers?

  • Wrong capture time when importing from iPhoto to FCPX

    I am experiencing a strange problem when importing from iPhoto to FCPX. If I open the info panel in iPhoto I see the real date/time when the picture was taken, but if I import them to an event in FCPX using the PHotos Browser and I check the info it shows the time when the image was imported to IPhoto and everything gets messed up.
    I have search for somebody with same problem but I have not found anything so far.
    MY workaround is to import directy onto the timeline, but it is... well, a workaround.
    Thanks in advance

    Why is knowing that important during the edit?
    Yes, FCP only shows the date imported" date metadata.  Future updates of FCP X I assume will add more metadata support, such as Creation Date and Modification Date, since metadata is vital to FCP X and there are some metadata handling features that are on the way. 

  • Imported from iphoto want a do-over

    Purchased a new iMac.  Transfered my old iPhoto library (thousands of photos) to iPhoto on new iMac because I wanted to transfer those from iPhoto to Elements 11 which I just purchased.  My plan was to use Elements to organize and edit.   I used the import from iphoto option in Elements to import my iPhoto library.  None of the original dates came with my photos! 
    I read another forum post here which discussed why this occurred.  I think I understood that information but I now need to know the quickest way to remove all those folders of pictures that have incorrect dates from Elements so I can try again.  Can someone please direct me as to how to start over?  Thank you!

    Barbara - I created a folder and put all the photos into it so they are not associated with iPhoto anymore.  Then I selected import from PSE Organizer and chose the pictures that I wanted to import.  They import with the "Date Modified" as the original date and "Date Created" as today's date or the import date.  So, your directions worked and I'm on my way to getting something done, finally.  Thank you!
    My final thoughts:  I'm very disappointed with the way the "import from iphoto" option works.  I don't understand why the program wasn't designed to bring along the date from the exif data.  Organizing a lifetime of family photos greatly depends on the photo's original date.

  • I started to get duplicate files each time I use iPhoto browser, it used to be only on videos, now, on every picture I import from iPhoto.

    I use iPhoto to I import my pictures from my iPhone or iPad. Only because of the ability to remove at once all the imported ones from the iPhone/iPad.
    Each time I use the iPhoto browser in the import process.
    Each time, I get a duplicate file when import videos. Two files, stacked. Now, I started to get the same on each picture. Two pictures, of each one imported from iPhoto.
    I never edit them from iPhoto. The pictures or videos, just go from the iPhone, to iPhoto, to aperture. Never touched or edited.
    Why, a I getting twice the pictures when they come to aperture?
    I'm not an expert, I could use some help. My concern is that THIS DID NOT HAPPENED BEFORE, only on videos, now, it is for everything.
    If someone can help, I would be very grateful.
    Federico

    Hello,
    You can think of the shift registers almost as local variables. They are used to store information from the previous iteration of the loop to the current iteration. In the example that srikrishnaNF posted, he has basicalyl implemented a state machine architecture to control the different options. Once the file path it set, it is saved for the next loop iterations within a shift register until it is updated with a new path. The first case structure determine whether you want to write to a file or not. The second case structure determine whether the user needs to be prompted for a new file path, or whether it is still writing to the same file. This is indicated by looking at the true and 1 case. Here, the user wants to write to a file and the file path has been selected in the true and 0 case. In the true and 0 case, the user has selected a file, the 0 has been changed to a 1, and you then enter the true and 1 case. In this case, the value is kept at 1 meaning that the user will not be prompted for a new file path as long as the write to file button remains true. Once the write to file button switched, you will enter the false case. This case resets the 1 to a 0 and will cause the user to enter the true and 0 case when the write to file button is clicked again.
    -Zach
    Certified LabVIEW Developer

  • I recently switched to Aperture. When I opened an image I imported from iPhoto, I don't have an option to edit it. Top of "Adjustments" tab says "image offline". How can I adjust Aperture so I can make adjustment to my iPhoto images?

    I recently switched to Aperture. When I opened an image I imported from iPhoto, I don't have an option to edit it. Top of "Adjustments" tab says "image offline". How can I adjust Aperture so I can make adjustment to my iPhoto images?

    I never tried importing from the iPhoto library as referenced images. I wonder if Aperture can access images stored in an iPhoto library package?  Even if it would work, it sounds like a bad thing to do.
    You might consider starting over and this time have Aperture manage the images.  That will copy them to the Aperture library, leaving the iPhoto library untouched. This assumes you have sufficient space to make a complete copy of all the images in your iPhoto library plus another copy of each image that Aperture makes as the preview image. You can then back up your iPhoto library (two backup copies, just to be sure) then remove it from your hard drive when you start getting too low on space.  As I write this I don't know where your iPhoto or Aperture libraries are/will be located so I'm assuming you have them on your HD.

  • Merge JPEG and RAW after import from iPhoto

    Hi,
    camera is set to shoot JPEG + RAW, iPhoto manages after import from camera as two separate files.
    I want to transition from iPhoto to Aperture.
    After importing from iPhoto into Aperture, is there any chance to merge the files in a way similar to how Aperture merges jpeg + raw when importing directly from camera?
    Thx
    Axel

    When I click on Faces, it's empty, the import from iPhoto forget to import faces?
    Hello Kris,
    How did you imort from iPhoto? If you import using the Aperture Apllication menu
         File -> Import -> iPh.oto Library
    then all your Faces should be transferred from iPhoto.
    Which of the two buttons in Aperture do you use to show your "Faces"? There is the "Faces" button in the Library panel and the "Faces" Button in the Toolbar. Both behave differently. The "Faces" button in the Library panel  will reveal all faces, whereas the "Faces" Button in the Toolbar will only show the faces detected in the in the currently selected item (folder, project). So it may appear that faces are missing, even if they are included in the Aperture Library.
    Regards
    Léonie

Maybe you are looking for