Importunes about version in MIC
Dear QM gurus,
any one can you please explain what is the importunes about version in master inspection characteristic creation.
i am totally confused please help me.
naren
In simple words,MIC is created as a Master data when you have same char used at several places.So you create it once & use it multiple time.
Now in this process when you have a MIC which is slightly to be changed for certain parameters,so needs to create another version of the MIC which has some parameters different from the previos version.
sap you have a MIC which is MIC1 version1 with UCL = 12 & LCL=10.
Now you get a requirement to change limits of this MIC for a situation at one place(say UCL = 12 & LCL=10.50).
As Version 1 is already used at sevaral places you may create New version say 2 and assign it to new place.
Older one can be replaced with new one depending upon the customization"with History" & Without Histoty" .
Similar Messages
-
Fire fox is back to not exiting properly this started again at about version 17 . I have reinstalled reset it but no luck.
See:
*"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
*"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs
Make sure that Firefox closes properly and that there isn't a hanging Firefox or plugin-container process left in the task manager.
Try to use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
You can also check for issues with plugins.
*https://support.mozilla.org/kb/Troubleshooting+plugins -
I have a Pc with windows vista. I have safari 5.1.7 installed. I want to know if there is an upgrade for safari. I heard about version 6 and 7.
Since Safari for Windows is a little old now. some things may no longer display properly if the website creator moves to newer technologies not supported on older browsers. You are likely to see this in more and more sites as they update themselves.
I suggest using a more modern browser. -
Question about versioning (history) in the latest release
Hallo,
Some questions:
1. Will versioning ever be integrated with locked pages, locked scene, colored pages, revision marks functionality etc, so that at a particular moment you can optionally augment the current versioning with the more traditional way of production revision cycles?
2. If above will not be the case (or is never activated): what currently happens with scene numbers & manual breakdown info that is already added, but than the scene gets deleted. Is all this info gone (& scenes renumbered). Can we save a version to keep this info? Please clarify.
3. Regarding breakdown of elements: will there be a way that we can visualize breakdown sheets on screen. It's much easier for me to look at it that way, e.g. the Scenechronize way (I guess I'm old).
4. Regarding breakdown and making the script 'production ready', will there be a way to combine scenes that belong together and part scenes (that are not in the same shooting location but where the writer chose to combine the action in one scene, eg like telephone conversation etc).
I guess all my questions boil down to this: will Story also aim to offer serious production breakdown features that could be used by production managers & assistant directors to prep for physical production, or will it mainly be a collaborative writing tool (even if it does allow you to transfer text into On Location shotlists and then eventually into your clips).
I guess there's a conceptual difference (at least when talking about narrative film with a lot of cast, locations, props etc): do you support mainly the writing effort and than transfer into a tool like Scenechronize once production starts - or do you go further? For (corporate) interview type shoots this matters less.
I would be interested to hear your views on the matter.
Regards,
BavoYes. Versioning will be integrated with locked pages, colored pages but we are not planning to lock scenes yet. We will also show asterix against changed lines in future updates.
You can always explicitly save a version (file->save as) to mark a checkpoint draft. You can add your own comments while saving this draft so that you can find it later.
We'd like to support production related features because we want to leverage script metadata for all it can be leveraged for. That said, "full fledged" is a loaded term. We will take small steps and enable workflows related to production as we go along. Dynamic breakdown reports, that can be viewed and edited in Story are on our roadmap.
--Anubhav -
Report about Version Management of PO
Hello,
Version Management is active in my system.
Is there any standard report that shows any information about the different versions of the POs?
I need a report which atleast shows the number of versions that exist for a PO.
Any help appreciated.
ThanksHi,
Use EKKO table and field name as REVNO with this you can go for Z development report. -
All confused about versions!!
Hello,
I'm sorry if this has already been explained in parts else where, but I need a totally fresh clear picture of what is going on. This is my problem, although I would say I am fairly comfortable with Java programming; and I go enjoy it alot, I am only just about comming to grips with all the different versions and the ways in which it is organised. This is where my problem lays.
I am using jdk1.3.1, and Forte version 2. I take it this is J2SE. Now I want to start programming Secure Sockets (am working on client server architecture), however from searching through the different classes available I found that I don't have javax.net.ssl. So I think.. lets just download J2EE. But from the looks of it all the specifications required do not list Windows 98 which is what I am (still?!) using. I am stuck... can I just download classes?! I don't know what to do.
Somebody please help a confussed DOS C/C++ programmer :-)
-thanksjavax.net.ssl is a standard part of the 1.4 API, the easiest way of using it could be upgrading to 1.4.1 or 1.4.2 Beta.
But maybe you can still download it from http://java.sun.com/products/jsse/ ...
Forget about the EE stuff, it's not what you need :) -
Information about versions of skype
hello everybody, there is a place to have the information about the improvements of each new version of Skype, i think is something like GARAGE or something like that but i dont remember very well. could someone tell me the site of this place? thanks a lot for your help and have a nice week.
Solved!
Go to Solution.The latest 6.22.81.105 version has a different user interface and design of the chat window.
http://blogs.skype.com/2014/10/09/improved-skype-desktop-clients-for-a-dynamic-new-chat-experience/
However, several features available in the previous versions, are removed in this version.
Personally, I don't like the "improvements" made in this new version. -
Live Update confused about versions installed?
I have a MSI Neo4 Platinum and first I installed the Marvell LAN Drivers via Live Update (Version 7.14.1.3). This driver did however seem to be very unstable (the network connection dropped after a few minutes of use), so I went to Windows Update and picked the Marvell Driver there. It shows up under the Driver Tab as version 7.29.4.3". This driver seems very stable and my dropped connection problem is gone. I had this problem on two different installations of this board.
When I now run Live Driver, it incorrectly reports that my current version is 7.14.1.3 (not 7.29.4.3). It is obviously confused about shich version I'm running.
Anyone else seen this problem?olavt,
Do not bother with Live Update. If you want to update anything, do it manually. Also for Mobo Drivers, usenVidia nForce Drivers
Take Care,
Richard -
A question about version of JDK
hello!
My cpu is Turion x64 TL-50,but I use WinXp sp2 (32bit-version)
then which jdk shall i download?windows-i586 or windows amd-64?
jdk's version depends on os only?yep, 32 bit software normally run on 64 bit cpu (not XP 64 bit, the environment) unless ur using win 64.
-
Question about version based downloads
How does the jnlp-servlet know where different versions of a jar are? Does it look through the entire web directory for version.xml files and keeps a list? I am asking because I don't really understand what steps would be involved when I needed to create an update to my application that was previously deployed with jnlp.
If someone could just explain how they would setup an update using the following scenario. I have an application with two jar files (one.jar and two.jar). There is a new release of my software and only the two.jar had changes. What would my old jnlp file look like and what would the new jnlp file look like? What would the directory structure look like now that I need to maintain the old two.jar around for incremental updating (i.e. jarDiff)?
Lancesee:
http://java.sun.com/products/javawebstart/1.2/docs/downloadservletguide.html
if all resources are the for the same os, arch, and locale, you would put them on the web as
<codebase>/one__V1.0.jar
<codebase>/two__V1.0.jar
<codebase>/two__V1.1.jar
old jnlp file would have:
<jar href="one.jar" version-id="1.0"/>
<jar href="two.jar" version-id="1.0"/>
updated version jnlp file would have:
<jar href="one.jar" version-id="1.0"/>
<jar href="two.jar" version-id="1.1"/>
/dietz -
Question about version SAp Mobile Infraestructure
Good morning,
Actually we have using the version of Sap Mobile Infraestructure MI 25 SP 22 Patch 02 Build 200901191055
Do we want to know if exist some last version or SP of the Sap Mobile Infraestructure MI 25?
Thanks
Regards
FernandoHi,
Now, the latest available version of SAP Mobile Infrastructure is 7.1 with EHP1.
For MI 7.1, go to:
service.sap.com/swdc -> SAP Installations & Upgrades -> Installations & Upgrades - Entry by Application Group -> SAP Netweaver -> SAP Netweaver -> SAP Netweaver Mobile 7.1 -> Installation .
If you want to install MI 7.1 with EHP1, go to:
service.sap.com/swdc -> SAP Installations & Upgrades -> Installations & Upgrades - Entry by Application Group -> SAP Netweaver -> SAP Netweaver -> SAP EHP1 for SAP NW PI 7.1 -> Installation and Upgrade.
The same installation DVDs are required to install both PI 7.1 EHP1 and MI 7.1 EHP1.
Read the installation guides at service.sap.com/instguides and it will clarify any further doubts that you may have.
Thanks,
Shitij -
Dear all
I am a oracle dba L1 can anybody explain me the meaning of
10.2.0.3.0: in this version can you explain me what is 10 what is 2 what is 0 what 3 like that, i thought every number having his own name and own patch..please explain meHi;
Please read:
Database version-5 digit explanation
Re: oracle Version diff
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios -
Warning about version when opening pdf
Hi,
I get the following warning when openning a pdf generated by LiveCycle Forms ES:
My Adobe Reader version is 9.2.
Is there a setting in my xdp's which might cause this warning to appear?
Kind regards
/LarsGoto File menu-> Form Properties-> Defaults tab
Change the Target Version to 7.0.5 or later
Hope this will solve your problem.
Nith -
About to throw mice in the bin
Hello
I have 2 mighty mouses, one that came with my iMac and a cordless one I bought for use with my MBP.
Both are currently in the same situation, i.e. the scroll ball will only move in one direction.
I have tried endlessly all the cleaning tips on this and other sites and nothing. They just wont budge.
Are these mice items one should simply replace every 2 years or so? Should I bin them and get new ones?
Thnks
JIf they are two years, old they are out-of-warranty, unless you extended the warranty to three years with Apple Care. If they are still under warranty, Apple usually will send you a new one if you complain nicely to Apple Care.
If they are out-of-warranty, are you adventurous? Are you fairly good with an X-Acto knife and can avoid removing important fingers? Can you spot glue with Super Glue without sticking all of your fingers together?
If so, I have cut open my MM a number of times and cleaned the tiny rollers and spot glued it back together. The rollers just become super clogged with everything and do not make good contact with the little rollerball eventually.
Here is a video of a guy who prefers to use a plastic pry. I find patience with the knife works better. And after you have done this once, it is much easier months later to do it again if you glue it together sparingly with the Super Glue.
How to clean an Apple Mighty Mouse - Take-apart guide
Dah•veed -
How can i get prior information about version update?
Hi Support Team,
Our centralized firewall blocks Firefox each time when its get updated. So i ([email protected])would like to have a prior information about the update so that i can make changes in firewall accordingly.
Looking forward your helping hand!The following link contains details of planned releases - https://wiki.mozilla.org/Releases
Maybe you are looking for
-
7-29-08 Hello, I work in an engineering enviromment doing visualization and animation. I have been an advocate for Acrobat 3D as a better way to communicate with our customers. We have a large contingent of Autodesk Mechanical Desktop and Inventor us
-
OWB Can't Import Existing Package with Collection Data Type as Arguments
I created a package and compiled it successfully as the follows: +++++++++++++++++++++++++++++ CREATE OR REPLACE PACKAGE PACKAGE_TEST AS TYPE Num_LIST IS TABLE of NUMBER INDEX BY BINARY_INTEGER; FUNCTION TEST_FUNCTION1 ( arg1 NUMBER, arg2 NUMBER) RET
-
Payment Run (F110) error for MT103 - BFIBL02-303 - Bank Data is incomplete
Hi, I'm trying to do a foreign vendor payment run in F110. We have a payment method type Z for these vendors, and FBPZ I have this payment type set to use the Payment Medium Workbench (PMW) with MT103 format. When I run the proposal I receve the erro
-
Dear All, While Importing I am triggering always with the below error. could you please help: IMP-00017: following statement failed with ORACLE error 603: "CREATE INDEX "EDW2_STATS" ON "EDW2_STATS" ("STATID" , "TYPE" , "C5" , "C1" " ", "C2" , "C3" ,
-
I have a PXI-1042 with PXI-MXI-3 interface kit. In the chassis I have inserted an OEM PXI module. When I run MAX, all I see is PXI System->PXI Bus 0->PXI0::MEMACC. Is this correct? How do I see the other modules?