Imposible to login to an application like end user

I try to develop an application with Oracle Application Express together with Oracle XE.
Oracle XE is installed on a different computer.
I'm working to a different computer that is a client. Also the application is already (partial) created some users with different rights are also created (developers, end users and workspace administrator). When I try to connect like end user, I get this message you have below:
Logout (link to logout of application)
Access denied by Application security check (message)
Return to application. (link to return to application)
What is wrong that I cannot connect like end user?

Hi Paul,
This is the setting in this moment for my application. I tried also to set different security check for every one page and then try to connect only to that page only.
Also I have some endusers that must to connect to my application like enduser. Answer is same.
I try to setup authorisation schema properly using database users (I've done some users in my XE database with same name and same password). Also, I get same answer.
I'll try step by step all possible combinations for security check, because there is no logic answer for my mind in this moment with all these security schemas. See here what they are saying in help files:
Application Express Authentication checks the user name and password against the Oracle Application Express account repository.
There is a nonsense answer that I get from application part, because a developer account is working very well.
Best regards to you,
Daniel

Similar Messages

ABAP application and "End User License"

Hi all,
I'm happy to join to SDN!!!
I newbe in the forum, and therefore I don't know if I post in the right section.
I'm a Netweaver Architect and ABAP Developer.
In the past I worked as java developer, and with other programming languages.
I have a doubt: is it possible (or forbidden by SAP AG??) to develop an ABAP package (Z / Y Abap objects) and apply an "End User License" on it? (I mean that the copryrights are mine, and I give an "End User License" to my customers (that buy the license), in order to get and run my abap code). I would avoid to sell my Abap package, but, if possibile, I would only give it according a "Use License".
May I do this thing without any problems, or have I to consider other aspects, like ask to SAP to reserve a namespace, or obtain SAP Netweaver certification for my ABAP solution, or other things?
(Infact the "End User License" that I mean is different from "SAP End User License")
Please, let me know your opinion and how or who could solve my matter.
Many thanks to all.
Best Regards,
Albert

Hi Albert,
I thing you are doing some mistaken, please read carefully SAP licence agreement or send query to SAP they will reply accordingly.
Regards,
Anil

Dashcode for application like iPhone User Guide

Apple's iPhone User Guide at http://help.apple.com/iphone/guide was created, at least in part, using Dashcode. This is evident when you examine the source code.
However, I've not figured out what they might have used to create the XML files that make up the contents of the book. Lines like *<object type="CONTENTS" id="z129">* look like a Core Data database; I wonder if it's a custom Mac OS application they wrote to author the books.
Does anyone know more about this? I'm trying to make a "Help" section for my iPhone app which has an embedded Safari web browser and would like to do something similar to the iPhone User Guide.

It's not useless if you take the time to actually read it...
To accomplish what you want, go into your contacts, open the contact, tap "Edit", scroll down until you see the field for "Ringtone". Tap it and choose the ringtone you want for that contact.

End User Unlock and Password Reset in GRC AC 10.0

Hi Dears,
I have an issue related to End User Unlock and Password Reset.
We maintained Data Source as SU01 in SPRO, So that User can able to access GRC Application through End User Login with ECC System login
Details for raise a request.
If user is locked or forget ECC system password, then user not able to access GRC Application through End User Login with ECC System login Details for Unlock or reset Password.
In this situation, how user can unlock or reset the Password for ECC System.
Could you please provide the solution to resolve the Issue.
Note:- No LDAP or Acitive Directory.
System Details :- GRC AC 10.0 , SP12.
Regards,
Karnatak.

Hi Rupesh
That was my warning on the post I linked you to
Quite a few PSS solutions have this as a setup (even SCN). The key thing you are reliant on is that the email account must be restricted to only the user to receive the password/link as well as appropriate Challenge Response Questions defined as part of their registration.
But yes, they can technically enter any User id to request the password and if they know the answers to the questions then they will get the password issue.
Your alternatively is to introduce another system (i.e. AD which you ruled out) or see if there is a way to introduce a second factor authentication (I don't believe this is delivered with GRC).
Regards
Colleen

Using SPML to create a custom end user interface?

We are trying to create a custom end user interface which uses SPML to communicate with our IDM server. The issue we have is whether there is a way to login to IDM from this end user interface as the end user, or at least run the end user functionality such as password changes and authentication question setup as the end user without giving all end users SPML capabilities. Right now we have created a special SPML user account and we have given that user broad capabilities. We are able to change passwords and set questions but the auditing just shows the SPML user as the subject for all these actions.
Thanks,

It looks like you are absolutely right.
I also cannot find that zlman option.
So it looks like you are the first that needs it.
We use zlman to create bundles and add packages when we build them in our rpm build environment, but at that time that are always new packages that need top be uploaded. So the bundle-add-package is what we use, but that doesn't help with packages in the repository.
So I would write a enhancement request for it ...
http://www.novell.com/rms
As a workaround, not a nice one of course, you can search for the package in the repository and upload it once again. It should recognize that and create just the package links to the bundle. Not nice, but it seems to be the only option for now.
Rainer

Enabling end users to create and upload their own layouts for PDF reports

Using the PDF printing features in APEX 3.x and BI Publisher, you can create professional looking report designs with no programming knowledge, simply by using the built-in wizards of the BI Publisher Word Plug-In, and a little knowledge of how to use MS Word. The nice thing about using the Word Plug-In is that even the end users of your APEX applications could potentially do this. The only problem is, that typically those report layouts are stored under the Shared Components of your application, and end users generally don't have access to the Application Builder, all they typically use is your APEX application. So then why not simply add an interface to your APEX application that lets your end users upload their own layouts and dynamically link them to APEX report queries at runtime? I put together a sample application that demonstrates this technique, you can try it out on apex.oracle.com or download the application and try it on your own APEX instance. Here's the link to my Blog with more information:
http://marcsewtz.blogspot.com/2008/05/enabling-end-users-to-create-their-own.html
Regards,
Marc

Hi Marc,
Very nice app. I tried to create a new template with success.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

SOD for project team & end users

Experts,
1) Is SOD check is done for project team members like the end users?
2) Normally where the SOD is done for the end users ( VIRSA or 3rd party tools )? Is it checked after assigning the end users to the roles in the PRD or in DEV itself ? Where basically the VIRSA tool is implemented in SAP system?
3) Is there any special kind of tool to reset a huge no: of users password? ( other than the CATT/ECATT)
Thanks much,
Kevin

> 1) Is SOD check is done for project team members like the end users?
Project members mostly do not have access in live PRD systems. Once there, treat them like end users. See 2.
>
> 2) Normally where the SOD is done for the end users ( VIRSA or 3rd party tools )? Is it checked after assigning the end users to the roles in the PRD or in DEV itself ? Where basically the VIRSA tool is implemented in SAP system?
Your end users only exist in PRD most of the time. No need to create them in DEV. So SOD reporting is done in PRD.
> 3) Is there any special kind of tool to reset a huge no: of users password?
Don't know at the moment.

RE: Force user to re-login if the application is idle for awhile!

Hi,
I a similar thing a little while ago for an application written in a 4gl (not Forte) running
windows 95 clients. I ended up dropping out to "C" and using the SDK to install
hooks which monitored certain mouse and keyboard events to the application.
It ended up being less than 10 lines of code in the end whereas when I tried
to do it within the 4gl it was looked like wholesale changes to lots of code.
This option fell down when the user was reading their help file or updating
a word document so we added a pop-up which came up at the front of all applications
on the PC giving the user a further minute to respond so as not to annoy the genuine
user who was still "there" but doing something else.
I have not had the chance to try this in Forte yet but it should be possible.
If you think this might be an option for you I will try and cobble together an
example.
Dalton
===============================================================
Dalton Cranston 45 Castle St.,
GO5 Ltd Reading. RG1 7SN
E-mail: [email protected] United Kingdom
URL: www.go5.com Phone: +44 (0)1189 589 555
Fax: +44 (0)1189 587 467
-----Original Message-----
From: Lu Wang X1 [SMTP:[email protected]]
Sent: 13 February 1998 17:45
To: [email protected]
Subject: Force user to re-login if the application is idle for a while!
Hi;
For some security reasons, it requires our Forte application to force user to
re-log into the application if the user doesn't use this application for 10
minutes. The problem and difficulty to us is that how to determine there is no
activity going on for this application on the client's PC.
Any thought and ideas will be greatly appreciated!
Lu Wang
Eli Lilly and Company
[email protected]
(317)276-5776

Hi Rick,
Thanks for the Reply.
When they are doing some action with RF id system gave DUMP - ITS_TEMPLATE_NOT_FOUND.
With this is there any efect on Table locking.
We got the dump on the ITS screen where as at the same time in back end ECC system TABLE data is using.
Thanks
Naresh

Portal - cutom message to end users (like sm02)

Hello All,
Is it possible in Enterprise portal to display a custom message (like sm02 in ABAP ) when end users login.
Thanks
Tom

Yes...
1. Buy Software that can do it for you --> http://www.sweetlets.com/w/solutions/system-messenger/
2. Build it yourself.
a. simple html file that you can embed in your framework that you can set on the fly (simple solution)
b. time based publishing of content via KM http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e8/a9a76828b8dc469969ff450ec81ced/frameset.htm (medium solution)
c. develop some application (in webdynpro for example) that can do this all for you (advanced solution).
Cheers,
Benjamin

Need help on Vb code to login into Ondemand application

Hi ,
here is the vb code tht I m using to fetch sessionid and do login into ondemand application using VB 6.0
However,its returning me error like :
"HTTP/1.1 500 Internal Server Error
Date: Tue, 09 Dec 2008 06:16:26 GMT
Server: Oracle-Application-Server-10g
Content-Length: 409
P3P: CP="CAO CUR ADM DEV TAI PSA PSD IVDi CONi TELi OUR IND PHY ONL UNI PUR FIN COM NAV INT CNT STA PRE"
Cache-Control:"
Code written on a button click:
Private Sub Command1_Click()
' Define a function or sub to contain the login steps as defined here.
Dim netHeaders As String * 1024
Dim headerSize As Long
' Open the internet connection.
m_hInternet = InternetOpen("Microsoft Internet Explorer", 0, vbNullString, vbNullString, 0)
m_hConnect = InternetConnect(m_hInternet, "secure-ausomxxxx.crmondemand.com", 443, "UserNameGiven
", "PasswordGiven", 3, 0, 0)
m_hRequest = HttpOpenRequest(m_hConnect, "GET", "/Services/Integration?command=login", "HTTP/1.1", vbNullString, vbNullString, &H84A83000, 0)
sHeaders = "Accept-Language: en" & vbCrLf & _
"Connection: Keep-Alive" & vbCrLf & _
"UserName: UserNameGiven" & vbCrLf & _
"Password: PasswordGiven"
result = HttpAddRequestHeaders(m_hRequest, sHeaders, Len(sHeaders), &HA0000000)
result = HttpSendRequest(m_hRequest, vbNullString, 0, vbNullString, 0)
headerSize = Len(netHeaders)
result = HttpQueryInfo(m_hRequest, &H16, ByVal netHeaders, headerSize, 0)
' Now parse netHeaders for header named JSESSIONID.
' This will be the value to use for the rest of the session.
' Then to Logoff, do the following:
m_hRequest = HttpOpenRequest(m_hConnect, "GET", "/Services/Integration?command=logoff", "HTTP/1.1", vbNullString, vbNullString, &H84A83000, 0)
sHeaders = "Accept-Language: en" & vbCrLf & _
"Connection: Keep-Alive" & vbCrLf & _
"Cookie: JSESSIONID=abc123:-1"
result = HttpAddRequestHeaders(m_hRequest, sHeaders, Len(sHeaders), &HA0000000)
result = HttpSendRequest(m_hRequest, vbNullString, 0, vbNullString, 0)
End Sub
Please help.
Thanks.

Hi,
I have already tried with that.Its nt then even allowing to run the function "HTTPSendRequest".
It's retunrning false value for that function.

End user - Access denied by application security check

Hello all,
Being a new Apex developer, I'm really hoping someone can point out the magic solution to this problem. I have just created my first Apex application and have only 3 end users who will be using it. I create their username and passwords as the admin and everything is fine, until they try to log on. That's when I get the Access denied... error. However, if I switch them from an end user to a developer, they are magically able to log in and access the application (as a developer obviously). I should mention they are internal users and have internal account credentials, so it shouldn't be this difficult.
This is particularly maddening because I have tried every combination of authorization and authentication I can think of. I am at the point where there is no authorization scheme and it still won't let them in.
Searching through the forums, I've come across threads that mention this error when an Admin tries to log on, but not an end user.
If anyone has ANY ideas, it would be most appreciated.
Thanks,
Ben

Hi,
What URL have you given to the users to gain access to the application. Are they trying to access it via the developer login?
What version of APEX/oracle are you using.
APEX using embedded PL/SQL gateway should look something like this
http://hostname:port/apex/f?p=101 where 101 is the application id
APEX using Apache
The URL should look something like this
http://hostname:port/pls/apex/f?p=101 where 101 is the application id
Regards
Paul

Multiple End User Application

Hello everyone,
I am newbie to oracle APEX, just would like to seek some information from you all.
I would like to build a normal system withl end user registration inside the application.
That means I have a user table with username and password, how can I can direct different page to different user login?
Thanks for advance

Hi
You could create a branch of the type 'Branch to function returning a page' and reference the :APP_USER variable to derive the target page from a table?
Cheers
Ben

Can not login to Oracle Application Express after upgrade to 3.2

I installed oracle database express and then I upgrade APEX to 3.2 on it. I got the login page but I can not login by using any account, like SYS, SYSTEM. From the document, internal ADMIN account should exist but I did not see it from dba_users table.
Thanks,
Julie

HI Don,
I did run apxchpwd.sql to change the Application Express ADMIN user password. Then I invoked http://mymachine:8080/apex and got the Application Express login page. I put ADMIN in workspace and ADMIN in Username and the new password. But I still cannot login. I also tried http://mymachine:8080/apex/apex_admin page login. I typed ADMIN as username and the new password. Then I clicked on Login button. Nothing happened. No error message.
Any idea?
By the way, what does apxxepwd.sql do?
Thanks,
Julie

Specify initial page following mod_osso login for JSP application?

I'm developing a JSP application that is stand-alone from Portal, but that is protected via mod_osso. (What's the proper term for this - its sort of a Partner application, really an External application, but not registered w/ Portal at all...) Following mod_osso validation, if the login page was brought up (ie, the user was not signed when the application page was requested), I'd like the user to be taken to a 'default' application page (where I can retrieve other user info from the db for use in subsequent pages of the app.) Is there a way to specify this w/ mod_osso? (ie, after login, take user to a specific page.) I could put a flag in the session, check it on each page (ie, Boolean hasVisitedHomePage or such), then redirect to the home page if its false, but would rather not do this if there is a smarter method.
Thanks,
Jim

Following are the steps to use SSO with an J2EE application:
Steps to enable SSO/OID user authentication to your J2EE application
1)     Deploy your apps to Oracle9iAS mid-tier instance e.g. mid-tier-host
2)     Connect to your SSO server in your infrastructure host as follows:
http://inf-host:<port>/pls/orasso/orasso.home and
Login as orcladmin. The default password should be same as your IAS_ADMIN password
3)     Click on SSO Server Administration and then Administer Partner Applications
4)     Click on Add Partner application
5)     Enter the following information for your environment and click on Apply:
Home URL: http://inf-host:<port>/osso_login_success
Success URL: Home Page for URL for your apps which you want to secure
Logout URL: http:// inf-host :<port>/osso_logout_success
6)     Logon to EMWebsite for the Mid-tier Oracle9iAS Instance
Select the HTTP Server -> Advanced Properties -> mod_osso.conf and add the following. Please make appropriate change for your environment
<Location /context-to-secure >
AuthType Basic
require valid-user
</Location>
And then restart HTTP Server
7)     Now when you access your apps, the logon screen will appear
hope this helps
Debu

Is it possible to run an application from a user or container login script?

Is it possible to run an application from a user login script or a container login script?
A "Force Run" application object works fine if the user's workstation is setup to auto-load "Application Window" or "Application Explorer" but in this case I'd like to run an application when someone does a manual login (ie. they right-click red "N" and choose "Novell Login...")
Using a User Package's "Scheduled Action Policy" and the Event=Login also does not work when a user logs in manually. This type of Event seems to only apply when the user first logs into the workstation, not at a manual login.
Thanks,
Marc

> Is it possible to run an application from a user login script or a
container login script?
Yes, see the documentation:
http://www.novell.com/documentation/...a/a7q6999.html
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Imposible to login to an application like end user

Similar Messages

Maybe you are looking for