Impossibility to send a fax after upgrade to 10.6
Hello,
I've just upgraded to 10.6.2 from 10.4.11 and the "send fax" function via the external Mac modem ("MA034") doesn't work ("receive" is OK).
The error message is
cupsRasterInterpretPPD had an error: Unknown operator "level2"!
My local Apple dealer is of no help, sad to say, responding only "it works for me".
lepkitty wrote:
im not very knowledgeable about about fax machines
In the nearly a year that I've been doing frequent posting, I've learned that the best way for me to assure the quality of my advice is to avoid areas where I lack expertise. Sometimes I see a question where I think that I might be able to help, but I'm not sure I'd give the right answer. In those cases I keep that question open in a tab to see if someone else can give better help than I can. Only when no one has answered for many hours do I attempt to help.
If there are things in the posted question that I don't understand or if it's missing important information, I ask for clarification. I also try to read each questions carefully so that I don't give bad advice based on a misunderstanding.
The things described above don't always keep me from posting incorrect, incomplete, or mis-aimed advice, but I hope they help.
Similar Messages
-
Unable to fax after upgrading to Windows 8.1
After I upgraded from Windows 8 to 8.1, I have no longer been able to send a fax from HP Solution Center. I now receive the following message: "There was a problem while communicating with your HP device." I can successfully scan from HP Solution Center. I can also fax directly from the device. I do not have any issues printing. After I encountered the issue, I did a complete uninstall (levels 1, 2, and 3) and a reinstall but the same issue still occurs. I also shut off the antivirus software before I proceded with any of the above activity.
Hi Stretchmjl, The Print and Scan Doctor has shown an issue with the Scan feature. This can cause an issue when attempting to send a Fax with the Solution Center as the error has indicated. I suggest that you uninstall the software and drivers and reinstall with the following download. HP Officejet Pro Full Feature Software and Driver. If the troubleshooting does not help resolve your issue, I would then suggest contacting HP's Technical Support to see about further options for you. , : click here. Thanks again for your time. Cheers,
-
How I fixed the "can't send e-mail after upgrade to 10.5.6" problem
Like many of you I couldn't send e-mail after the upgrade. After trying everything including re-install combo update, delete and resetting profile, etc. the thing that made it work was:
1. custom set the outgoing server port number to 25 (for Verizon, ask your ISP the output port number)
2. ensure the password authentication is set for outgoing e-mail.
Goto account setting, "Outgoing Mail Server (SMTP)", select "Edit Server list"
Under "Account Information" make sure "Description" is blank (as suggested in other posts)
Under "Advance Information", select Use Custom Port: type in the port number
On Authentication, select password, type in user name and password as in "incoming Mail Server"
Save it and test if it works.
It seems selection of the default outgoing port has some problems, even though 15 is one of the three defaults.
ScottI just switched to Roadrunner and am having the same "can't send email" problem. I have done what you suggested, but the problem persists. I did note that in my outgoing mail server box it says: smtp-server.wi.rr.com:jzelinger3 (Offline). I'm not sure where the "Offline" is coming from or why it is there. Any suggestions? I performed the following Terminal tests with a tech. support person from Roadrunner:
Last login: Wed Jan 21 19:36:52 on console
CPE-75-86-226-41:~ joan$ telnet pop-server.wi.rr.com 110
Trying 71.74.56.78...
Connected to pop-server.wi.rr.com.
Escape character is '^]'.
+OK POP3 server ready.
user [email protected]
+OK please send PASS command
pass laikatess
+OK [email protected] is welcome here
telnet smtp-server.wi.rr.com 25
-ERR Invalid command; valid commands: CAPA, DELE, LIST, LAST, NOOP, RETR, RSET, STAT, TOP, UIDL or QUIT
This is very frustrating.
J. A. Zelinger -
Cannot receive faxes after upgrading to 10.5.8
Since upgrading, I cannot receive faxes on either powerbook. Sending works fine.
I too am having this problem under 10.5.8
Apple would appear to not know about it because they will only provide help under a warranty, Applecare or on an incident subscription basis.
Forget the Apple help documentaion. It just suggests that you reinstall the System software. That doe not help. Been there, done that. Further documentation suggests contacting Smith Micro, the purveyors of Fax Stf. They had me look in the Applications folder to see if FaxStf was lurking there. It is not. SM say the last time that they supplied Fax software was as part of Jaguar.
You can purchase Stf from Smith Micro for $49.00 $20.00 if you have a registered earlier version. That would have the benefit of tech support and full fax controlling options. smithmicro.com -
I cannot use my iPhone to make calls or send text messages after upgrading to ios 7
I just upgraded to ios7 and I can no longer make calls or send text messages. The screens seem to be locking. Does anyone know what I can do to fix it?
My wife is having the exact same issue after updating to the new iOS 8.1.1 and we've tried all the same steps even restoring the phone as a new phone. We've contacted our service provider and they've told us to go to apple to potentially "remove" her serial number from their servers to allow it to work properly on the service we have. We are desperate as purchasing a new phone right now is not an option and she desperately needs her phone for work and life.
Iphone 5 8.1.1 -
I used TB 2 for years with no problems. Got stupid one day and upgraded to 24.2 on Mac OS 10.6.8.
Now when I click send I get an error message. After dismissing the error clicking send a second time sends the email normally.
The other half of the problem is Get Mail. Click it once and nothing happens except the little line on the bottom comes up connecting to .. . but it doesn't connect. Click Get Mail a second time and it works normally.
I have a new Mac (Maverick) and TB 24.2 doesn't have this problem on the new machine.Anti virus?
And what is the error message? Mind reading I leave for the television people. -
Can't send e-mail after upgrading to Leopard
I recently upgraded my OSX from Tiger to Leopard. When I log into my Mail account, everything appears to be working fine; I can receive mail, compose messages, etc. But the "Send" button is grayed out. I don't get any prompts asking for permission to send -- it's simply not an available option. Is this fixable, or do I need to re-install?
From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password. -
Can not send new emails after upgrading to firefox 13
can not send new emails thru att.net (which is yahoo) since upgrading to firefox 13. Says "loading" and nothing happens. Can send new emails thru gmail
Hi,
Not sure about ATT but plain yahoo.com seems to be okay. Can you also please check this in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. If the new profile is okay, you can then [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] on the old (previous) profile via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''. -
Messages app can't send pictures/attachments after upgrading to Mavericks.
Finally got my phone and all address working for sending and recieving messages, but attchments of any kind fail to send or receive. Any help is appreciated!
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Cannot send fax from my mac after upgrading to yosemite
I used to be able to send a fax from my Macbook Pro by using Preview and then printing the PDF to the fax capability on my Laserjet colorMFP M475dn.
After installing OS X Yosemite:
a dialog told me that "Some of the software for the printer is missing."
When I clicked the button to install, it then said "You need to install software to use this printer... If the software isn't available in Software Update, contact the manufacturer of your printer"
Then I downloaded .dmg files for both the laserjet and officejet (I also have a photosmart I use for scanning)
I deleted the printers and tried to re-add them
When I re-add the laserjet, fax does not show up on the Printer list.
How do I get the fax driver to install on OS X Yosemite?
This question was solved.
View Solution.My apologies for keeping you informed about reset printing system.
i have attached the screen which tells where the Use option is.
also on the screen where it displays the list of printers wait for few seconds and see if it detects the Fax. It took approx 20sec for me.
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue -
Double MMS sending after upgrade to OS 3.0
Hi Guys,
After upgrading OS of my phone to 3.0 i am not able to send MMS properly. When i submit new mms it is arriving to destination 2 times and i am getting delivery failure response. Is there anybody who has this problem?
p.s: i collected tcp dump information taken from mms center of gsm operator, it is clear that iphone is submitting this mms message 2 times.
Thanks,
Message was edited by: azizoWhen you say 2nd generation iPhone, you mean the 3G?
The reason I ask is because MMS is not supported with firmware update 3.0 with the first generation iPhone.
When Apple announced the release of firmware update 3.0 at their WWDC, all carriers for the iPhone in all countries were not going to have MMS available for the iPhone when 3.0 was released. AT&T in the U.S. was one of the carriers not ready. AT&T will have MMS available for the iPhone sometime this summer.
Have you checked with your carrier for the iPhone to see if they have MMS enabled for the 3G & 3GS? -
After upgrading to Mountain lion I can not any more send and receive emails
I am not able to send/receive emails on Apple mail after upgrading to Mountian lion. I am using exchange account + pop/smtp account.
All settings are still the same and were working on Lion version. Please help.
thanks -
Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI
Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
Any ideas?The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again. -
After upgrading to iOS7, I can no longer send or receive texts that aren't iMessages.
As the title indicates: After upgrading to iOS7, I can no longer send or receive texts that aren't iMessages.
The text conversations are still there; you can see that I used to be able to text anyone. But now I cannot.
I have followed several different fixes suggested in these forums, I have Restored my phone, I have Reset Network Settings, I have Reset All Settings, I have checked settings on several friend's phones. But I still cannot send or receive texts that are not iMessage texts.
This seems like a pretty big deal. People text more than they call. And I now have a phone that cannot text very many people.
It is so frustrating. I have spent so much time trying to get it to work.
Grant HuhnHello and Welcome to Apple Discussions ...
I don't know if this is a corrupted preference file or not, but it sure can't hurt to try this.
If Mail is open, Quit Mail.
/Users/YourName/Library/Preferences/com.apple.mail.plist
Drag that .plist file to the Desktop. Launch Mail and see if you can send or receive e-mail. If you can, that .plist file is corrupted. Drag it to the trash, empty the trash and reboot. Your Mac will create a new preference file for you the next time you launch Mail.
Also... run Disk Utility and Repair Disk Permissions. Disk Utility is in your Applications/Utilities folder. Launch DU, select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, click Repair Disk Permissions. Quit DU when it's finished and reboot.
Carolyn -
Sender File adapter - Error after upgrade to SP16 !!
Hi ,
After upgrade from SP14 to SP16 , i see this error in Adapter monitor in rwb. The file does not get picked up. Any ideas on how to troubleshoot this ?
Configured at 2006-04-20 06:50:27 GMT
History:
- 2006-04-20 09:55:00 GMT: Retry interval started. Length: 30.000 s
- 2006-04-20 09:55:00 GMT: Error: BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
- 2006-04-20 09:55:00 GMT: Processing started
- 2006-04-20 09:54:36 GMT: Error: BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
- 2006-04-20 09:54:33 GMT: Processing started
Is there a patch that will fix this issue ?
Regards
matthias isenburgthanks for yours tipps...
here the output of the defaultTrace.trc:
[EXCEPTION]
com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0.process(ModuleLocalLocalObjectImpl0.java:118)
at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java(Compiled Code))
at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java(Compiled Code))
at com.sap.aii.adapter.file.File2XI.send(File2XI.java(Compiled Code))
at com.sap.aii.adapter.file.File2XI.processFtpList(File2XI.java(Compiled Code))
at com.sap.aii.adapter.file.File2XI.invoke(File2XI.java(Compiled Code))
at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java(Compiled Code))
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Caused by: javax.xml.transform.TransformerFactoryConfigurationError: Provider com.sap.engine.lib.jaxp.TransformerFactoryImpl not found
at javax.xml.transform.TransformerFactory.newInstance(Unknown Source)
at com.euh.FileModule.GetFileNameBean.process(GetFileNameBean.java:76)
at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0.process(ModuleLocalLocalObjectImpl0.java:103)
... 11 more
Error during processing local bean localejbs/sap.com/com.euh.FileModule/GetFileNameBean
Module Exception 'com.sap.aii.af.mp.processor.ModuleProcessorException: Processing Error caused by: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.' found, cause: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Channel Orders_ftp_sender: Sending file failed with com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback. - continue processing
Should this traces give me more information?
mfg,
matthias
Maybe you are looking for
-
Is there a way to keep my Mac Pro On the network without sleeping???
i'll try to explain this the best way I can. I often wish to access my Mac Pro over the network either for file sharing, or for use with Apple Remote Desktop. The problem is after about 20-30 minutes, the Mac Pro sleeps and disappears from the networ
-
I use my MacBook Pro as a music server. After downloading a song from the iTunes store I create an AIFF copy in my laptop's iTunes Library. I then delete the original purchased song from the library to avoid duplicates. In iTunes prior to version 11
-
E-mail functions for Custom Extensions
Hello, Is there a way to use the e-mail functions that P4P uses, including reading the config file, in a Custom Extension? Thanks, in advance.
-
JVMDG315: JVM Requesting Heap dump file
Hi expert, Using 10.2.04 Db with 11.5.10.2 on AIX 64 bit. While running audit report which generate pdf format output gone in error.... JVMDG217: Dump Handler is Processing OutOfMemory - Please Wait. JVMDG315: JVM Requesting Heap dump file ..........
-
Appearance of array, remove gap between cells
Hello All, I'm not a newbie with labVIEW but I'm trying to improve the GUI of my program. I would like to customize a array indicator. I already customized some controls. For the array, at first it seems easy, but I would like to minimize (remove) th