Impossible de jumeler iphone 5S avec mon MacBook Pro en bluetooth

Je n'arrive pas ni en buetoth ni par airdrop à jumeler mon iphone 5S et mon macbook Pro 13" Retina alors que toutes les mises à jour sont faites et que le partage de connexion est activé.
Merci pour votre aide.

Discuss your problem with a manager at the Apple Store involved.
If that doesn't work, you may want to contact Apple Support at:
France
Metropolitain:
(33) 0805 540 003
DOM-TOM:
(33) 0825 77 00 35*

Similar Messages

  • Bonjour, je suis en voyage et j'ai quelques soucis pour me connecter au wifi, tant avec mon iPhone qu'avec mon MacBook Pro. Après avoir introduit la cle wpe, il ne se passe plus rien. Si ce n'est un point d exclamation sur l indicateur reseau.

    Bonjour, je suis en voyage en irlande et j'ai quelques soucis pour me connecter au wifi, tant avec mon iPhone qu'avec mon MacBook Pro. Après avoir introduit la cle wpe, il ne se passe plus rien. Si ce n'est un point d exclamation sur l indicateur reseau.  Idem avec les reseau publics sans code d acces.
    Si vous wives une brillante idee cela m aiderait
    Merci

    Merci jmlevy de te pencher sur mon problème.
    Voilà une photo de mon panneau page :
    Puis une autre d'une page qui ne ressemble plus à rien après changement de pagination:
    Voici une ancienne page 28 devenue page 29. Fantastique, non ?
    On peut voir :
    Que mes blocs sont décalés par rapport à la maquette
    que le bloc noir de la page 28 déborde sur la page 29.
    Que mon bloc de texte est perturbé par l'ajout sous-jacent d'une page de maquette
    que ma pagination a conservé les attributs d'une page pair (numérotation à gauche) alors qu'elle est passée impaire.
    J'aurai considéré comme normal que mon ancienne p.28 se soit déplacée en page impaire avec le bloc texte bien placé ET avec les attributs de page (liés au gabarit, tels que pagination, filets, bas de page roulants) modifiés automatiquement. Or il n'en est rien.
    Tu me demandais des éclaircissements par rapport à "J'importe mes gabarits dans le document au fur et à mesure de la construction du livre et je libère les éléments de gabarit afin de pouvoir couler le texte et disposer l'icono. Lorsque c'est fait, je ne retourne pas dans le mode page d'InDesign. J'attaque la page suivante." Voici, plus en détails ce que je fais au moment où je monte une nouvelle page. Mes gabarits ont été  préparé en amont.
    J'ajoute une page au document (ex : une page de texte)
    je lui confère le gabarit qui va avec (ex : C-présentation ch1, cf plus haut)
    je libère les éléments de gabarits pour pouvoir couler le texte et disposer les images.
    quand ma page est finie je recommence l'étape 1.
    Est-ce que c'est à l'étape 3 que je me plante ?
    Est-ce qu'il y aurait d'autres explications à ce malheureux schmilblick ?
    Merci d'avance.

  • Des français sur les forums ? Pb avec mon MacBook Pro qui redémarre seul.

    J'ai un gros problème avec mon Mac Book Pro depuis que je suis passé à 10.8. L'ordi s'éteint tout seul, plusieurs fois par jour, il redémarre seul en fait, je dois réécrire mon mdp, ensuite je retrouve le bureau et les docs quasiment où j'en été resté... J'ai installé Mavevixs et le problème reste le même... C'est assez embêtant à la longue...
    Merci

    Allo Gautier,
    Il faut formatter le HDD comme "mac OS Extended (journalled)" avec le logiciel "Disk Utility".
    Après je propose de mettre le Librarie de iTunes sur le HDD, et aussi autre Libraries (iPhoto, Lightroom, Calibre, Virtual machines, etc).
    Laissez OSX et les Logiciels sur le SSD.
    N'oubliez pas de faire des backups sur un disk externe !, aussi pour TM.
    Lex

  • I cant pair my iphone 5c to my macbook pro via bluetooth why is that?

    Ive tried several time to pair my phone to my laptop but it wont pair, it says "failed" or "unsuccessful" pair and i want to know why.
    I first noticed when i was trying to connect my phone to use it as a remote for keynote but it wouldn't connect.
    then i tried an app called "remote mouse" and that wouldn't connect to my laptop either after following all the instructions.
    I can easily Airdrop stuff back an forth. thats not a problem.
    I see my iphone on my mac when searching for devices in Bluetooth but it won't pair.
    I changed the settings in keynote to enable a remote.
    I've changed my system preferences under "Security & Privacy" to allowed  "Keynote"and "RemoteMouse" access to control my computer. did nothing.
    My main concern is getting to work my iphone as a remote for Keynote
    Iphone 5c
    iOS 8.1.3
    Macbook pro
    I have Yosemite 10.10.2

    The iPhone and Mac do not BT pair with the one exception of BT tethering.
    The Keynote remote feature uses WiFi. See this support article for information: Using Keynote Remote - Apple Support
    if you are still using the Keynote remote App (which is no longer in the App Store) see this article:
    Using the Keynote Remote App - Apple Support

  • Comment lire des fichiers PDF avec mon Macbook Pro ?

    Bonjour,
    Je suis un nouvel utilisateur de Mac et j'aimerais savoir s'il existe un logiciel pour créer et lire des fichiers PDF ?
    Où dois je le télécharger?
    De même pour le Flash Player ?
    Dois-je l'installer avec le lien de téléchargement que le site me propose pour l'avoir?
    Cordialement.
    wise dity

    Please see the response from Dennis Griffin (Product Manager for Adobe Reader for Tablets and Smartphones) in the following post.
    When will the Metro app be updated, and what new features will be added?
    Alternatively, you can install Adobe Reader XI (desktop app with classic UI) on your Surface Pro (running Windows 8).

  • HT3887 why oh why can I not transfer my own photos from my own iPhone to my own macbook pro via bluetooth? This is so antiquated!

    I have an iphone that I use to take pics and just wondered why don't Iuse bluetooth instead of plugging it in each time...only to find apple won't let us do this. Is this still true? Seems like madness and a good reason to change...

    I have tried bump but it insists on location recognition before it will work properly. Maybe I am paranoid but I think they have enough info about me already....
    I shall keep looking.
    Thanks guys for all your input.

  • Hi. Can I connect my iphone 4 with my macbook pro via bluetooth? Thanks

    It will be great if you can connect your mobile phone to your computer right? Easy file transferring and no cable needed.

    You can't, file transfer by bluetooth is not supported.

  • Pourquoi mon macbook pro sous mountain lion ne se connecte pas automatiquement en wifi (box :freebox révolution) quand j'ouvre le capot et que je le fais sortir de veille ?

    voilà, j'ai un problème de connexion wifi avec mon macbook pro 13 pouces 2012.
    lorsque je ferme et réouvre le capot de mon macbook et que je le fais sortir de veille, il ne se reconnecte pas automatiquement à ma freebox et donc au réseau.
    Il faut alors que je sélectionne en pointant la recherche réseau ma freebox pour à nouveau retrouver ma connexion wifi. Pour autant dans les préférences réseau la connexion automatique est cochée.
    Quelqu'un a t-il eu le même problème, et a t-il trouver une solution ?
    Merci d'avance pour vos conseils et votre aide.

  • Mise en hibernation de mon macbook pro 2012 pendant la charge durant la nuit

    Bonjour, je rencontre le problème expliqué dans ce forum avec mon macbook pro 2012, quelqu'un a-t-il une solutions ?
    Lien : http://forums.macg.co/macbook-pro/sortie-de-veille-ecran-gris-flou-barre-progres sion-1205253.html
    Merci d'avance !!!!

    Salut! moi aussi j'ai le même problème depuis un bout j'ai un MacBookPro Fin 2011 et depuis 10.8 c'est le même problème et même que je suis sur 10.8.3 bêta toujours le même problème.
    J'ai reformaté comme toi et tout fait comme moi et cela n'a rien donné. Même que je suis sur un Fusion Drive et rien n'a changé.
    C'est très décevant, avec Lion (10.7) je n'avais pas ce problème-là.

  • Mon macbook pro, après avoir ouvert ma session de fonctionne pas ?

    Bonjour,
    J'ai un problème avec mon macbook pro 13'
    Lors du démarrage, j'arrive à me connecter à ma session mais ensuite je n'arrive pas à aller sur mon bureau.
    Je tombe sur le fond écran habituel de apple sans rien pouvoir faire !
    Que se passe-t-il ?

    Discuss your problem with a manager at the Apple Store involved.
    If that doesn't work, you may want to contact Apple Support at:
    France
    Metropolitain:
    (33) 0805 540 003
    DOM-TOM:
    (33) 0825 77 00 35*

  • Can't pair iPhone 5s with Macbook Pro via Bluetooth

    I have an iPhone 5s and Macbook Pro with retina display (running on iOS 8.0.2 and Yosemite respectively). For some reason, my iPhone can never see my MBPr but the MBPr can see the iPhone. Pressing the "Pair" button on in the Bluetooth setting panel in OS X will trigger the pairing confirmation to show up on my iPhone. After confirming the pair request, the devices remain connected for no more than 2 seconds. Then they just disconnect. (The status is "Not connected" underneath my iPhone on the Devices list in OS X)
    This has been bugging me for a while, even before I upgraded to iOS 8 and Yosemite. I was hoping the upgrade will solve the issue but apparently not. My iPad  on the other hand has no problem in connecting and remaining connected to my MBPr. That's just baffling.
    Just some context: the reason why I wanted to connect my MBPr and my iPhone via Bluetooth is because I want to use my my iPhone as the hotspot. Yes, I can use the USB cable, but can't blame me for trying the wireless route (And no, connecting via wifi doesn't  work)
    Any help is appreciated!

    Hi ddfaulk,
    Thanks for using Apple Support Communities.  This article has some steps you can try if you're unable to pair your iPhone 5s to your MacBook Pro over Bluetooth:
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/ts2756
    Cheers,
    - Ari

  • Problem with my Macbook Finder Bug/ Problème avec mon MacBook Finder Bug

    Hi, two days ago I took my Macbook Pro with me for my holidays, since then, the finder can't stop glitching (I'm on Mavericks) : every time I try to open a file, a document, even my preferences the finder bug and show me the colorful circle. Even when I'm on safari it continues to freeze during 20-30 seconds. Yesterday I did the new adobe flash player update and miracle, it worked for the evening. But when I started it this morning the glitches were back, I tried to do the update again but this time it didn't work. I don't know what to do, 3 days ago it was perfect and now it is full of glitches. I'm currently writing since 10 minutes because it freezes every 10 seconds. PS: I didn't download anything so it's not due to a bad download or a full memory.
    Thanks for your answers if you saw this kind of case before.
    Bonjour à tous, alors il y 2 jours j'ai pris mon Macbook Pro avec moi pour mes vacances et depuis le finder n'arrête pas de bugguer (Je suis sous Mavericks) et c'est la première fois qu'un problème de la sorte m'arrive. A chaque fois que j'essaie d'ouvrir un fichier, une fenetre ou meme les préférences le finder m'affiche le cercle multicolore et bug pendant 20-30 secondes. Même sur Safari l'ordi bug toutes les 20 secondes, en ce moment meme le message que je vous envoie bug et je prend actuellement 15 minutes à l'écrire. J'ai fais hier la MAJ d'adobe flash player et ça marchait par miracle pendant la soirée. Mais en le rallumant ce matin, le bug avait réapparu. J'ai réessayé de faire cette MAJ mais aucun résultat, je ne sais plus quoi faire. Il y a 3 jours mon ordi marchait nickel et là plus rien. PS: Ce n'est pas du à un mauvais téléchargement ni à un disque trop plein.
    Merci de vos réponse si vous avez une idée ou déjà vu ce genre de cas.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Quel disque dur est compatible avec mon macbook? + migration de l'OS.

    Bonjour,
    Je voudrais savoir quels disques durs sont compatibles avec mon macbook.
    MacBook (13 pouces, Aluminium, fin 2008)
    Je souhaite avoir une capacité de 1To.
    Ensuite, comment faire pour faire une image de mon OS actuel  (avec toutes les applications) vers le nouveau disque dur?
    Merci pour votre aide.

    A good source of hard drives for the MacBook Pro is OWC, http://www.macsales.com since they are Mac specialists and guarantee their products to be compatible.
    They also sell an external encloser that the present drive will fit into.  You can place the new drive in the enclosure, and then use Carbon Copy Cloner or SuperDuper to make an image of your internal drive with all applications and data on the new hard drive.  Then thurn the MacBook off and remove the internal drive and install the new drive.  You could also place the old hard drive in the enclosure and use it for extrea storage space.
    OWC has on-line videos that show you how to replace the internal hard drive.

  • Mon MacBook pro s'est coupe brusquement, je narrrive plus z le rallume et le, Mon MacBook pro s'est coupe brusquement et maintenant il est impossible de la rallumer. Le voyant du chargeur ne s'allume que faiblement et clignotte.

    Bonjour
    Mon MacBook pro s'est éteint brusquement et refuse de se rallumer, le voyant d allumage ne marche pas et l'écran reste noir
    Il ne charge d'ailleurs plus car le voyant sur le chargeur ne s'allume que très faiblement et de couleur verte
    Que puis je faire ?

    Essayez d'abord une réinitialisation SMC :
    http://support.apple.com/kb/HT3964
    Suivre les indications pour " une batterie, vous ne devriez pas vous retirer "
    Aussi essayer avec un autre chargeur si vous accédez à un, pour voir si cela peut être votre problème , si aucun changement suivez les instructions ci-dessous .
    Après cette vérification, les informations système , maintenez la touche OPTION clic sur le logo Apple, et sélectionner les informations système , cliquez sur l'énergie dans la colonne de gauche , et vérifiez l'état de la batterie . Avec le chargeur branché dans les infos Bettery :
    Consultez la page d'accueil de charge :
    espescially charge ( doit être oui )
    Info Santé : (devrait être normal)
    S'il s'agit d'une batterie peoblem vous shuould prendre soin d'elle dès que possible afin qu'il ne provoque pas peoblems encore / plus cher ( si vous êtes encore sous garantie , 1 an après l'achat , ou AppleCare laquelle il s'étend à 3 ans de l'achat de toute réparation doit être gratuit)
    Si vous avez des questions après cela et la page d'accueil n'est pas que je l'a montré , vous pouvez avoir des problèmes ther .
    Vous pouvez prendre rendez-vous au Genius Bar ay un magasin Apple , et ils disgnose gratuitement.

  • Bonjour j ai un problème sur mon MacBook Pro avec MacGuard comment on fait svp

    Bonjour j'ai un problème sur mon MacBook Pro j'ai le programme MacGruad je voudrais le désinstaler et quand je le place dans la corbeille in message me dit qu'il est ouvert et quand je veux forcer à quitter il n apparait pas, comment je doit faire svp merci d'avance,

    Instructions d'Apple
    http://support.apple.com/kb/HT4650

Maybe you are looking for

  • Need to repartition...

    Once upon a time I thought it was a good idea to partition the drive in this PPC iMac into a couple pieces. Now I want to undo this and make one big partition. It would be great if I could just resize the startup partition, but I guess you can only m

  • Booklet Printing in Acrobat Pro 8 Help!

    I am printing 500 of an 18 page - 5 page in the signature - booklet through Acrobat Pro 8.0.1. It takes HOURS for the file to load into the printer and I am only trying to print 50 at a time. I changed the default printer to Adobe PDF 8.0.1 and that

  • "Disable Check for SQL Express" against SQL Server Agent

    Good afternoon, Seeing as it has been a know issue for many years now[1], is there a reason why Microsoft has yet to include a "Disable Check for SQL Express" override (similar to the Automatic Configuration (& other) monitors) for each of the follow

  • Illustrator file open - setting location

    Hi, When doing a file open can we set Illustrator so that it points the same location each time ? The user uses a specific folder and wants to open to this folder everytime. any ideas ? Thanks,

  • Internet Connect Problems Since Updates.different than the "settings" issue

    Since the last couple of updates I have had nothing but trouble with my wireless connection on my MacBook Pro 104.11. I fixed the last problem but now any time I shut my computer off, I have to reset my wireless router (NetGear) in order to connect w