"impossible de modifier l'objet dynamique..."

Bonjour,
Je viens de désinstaller Photoshop CC et Illustrator CC pour installer les version CC 2014 à la place.
Quand dans Photoshop je fais "importer et lier" sur un fichier AI, il s'importe bien mais je ne peux pas le modifier, j'ai le message "impossible de modifier l'objet dynamique d'origine car l'application avec laquelle l'objet dynamique a été créé n'a pas pu être lancée."
J'avais déjà ce problème avec les objets dynamiques en passant de CS6 à CC et je n'avais pas trouvé de solution. C'est quand même assez handicapant.
Suis-je obligé de maintenir les vieilles versions des logiciels pour que cela fonctionne normalement ou existe-t-il une astuce ? Je n'ai pas beaucoup d'espace sur mon SSD système, je ne pourrai pas cumuler x versions de Photoshop et Illustrator...
D'avance merci.
Système : Windows 7 - 64 bits

-Allez dans le dossier où se créés les objets dynamiques :
C:\Users\Votre nom\AppData\Local\Temp
vous trouvez vos objets dynamiques en .ai et .psb
- Il vous suffit de réassigner la bonne version d'illustrator aux fichiers .ai en cochant bien "toujours utiliser ce programme pourr ouvrir ce type de fichier"
Et voilà ça remarche !!!
J'ai trouvé cette solution ici et ça marche !! : Impossible d'éditer les objets dynamiques

Similar Messages

  • Déformation d'un objet dynamique dans photoshop

    Bonjour
    J’aimerai savoir s’il est possible de modifier un objet dynamique par une deformation (type rotation..) (dans
    Un calque dynamique , par dessus un autre calque (un rond par example) lorsque j’applique une rotation du le rond cela l’applique sur l’image du dessous, de manière non destructive
    merci

    Un même objet dynamique peut-être utilisé plusieurs fois dans un même document.
    Éditez le contenu de l'objet dynamique pour qu'il se mette à jour automatiquement sur tous les calques où il se trouve.
    Double-cliquez sur la vignette de l'objet dynamique pour éditer son contenu.
    Alt/Opt puis cliquez-glissez sur le calque de l'objet dynamique pour le dupliquer.

  • Impossible de modifier mon image de compte utilisateur

    j'essaie de modifier l'image de mon compte utilisateur (admin) mais rien à faire!
    dans 1 premier temps, j'arrive à la modifier normalement (en allant dans les préférences systémes, onglet compte et utilisateurs puis clic sur l'image et choix d'une image dans les propositions). Mais ensuite systématiquement l'image que j'ai choisie est remplacée par une autre (toujours la même) qui revient systématiquement!
    j'ai essayé de réparer les autorisations du disque mais cela n'a rien changé, cette satanée image revient toujours!
    Quelqu'un peut il m'aider?

    -Allez dans le dossier où se créés les objets dynamiques :
    C:\Users\Votre nom\AppData\Local\Temp
    vous trouvez vos objets dynamiques en .ai et .psb
    - Il vous suffit de réassigner la bonne version d'illustrator aux fichiers .ai en cochant bien "toujours utiliser ce programme pourr ouvrir ce type de fichier"
    Et voilà ça remarche !!!
    J'ai trouvé cette solution ici et ça marche !! : Impossible d'éditer les objets dynamiques

  • Impossible de modifier mes informations de paiement

    Bonjour,
    J'ai utilisé le mois dernier une carte virtuelle pour mes achats sur itunes sans mémoriser le cryptogramme, qui m'est demandé pour tout nouvel achat. J'ai beau essayer de modifier mes informations de paiement avec une nouvelle carte, il refuse de les changer et me demande d'accéder à la communauté d'aide. Help les gars et les filles !! F...k I'm stuck !

    -Allez dans le dossier où se créés les objets dynamiques :
    C:\Users\Votre nom\AppData\Local\Temp
    vous trouvez vos objets dynamiques en .ai et .psb
    - Il vous suffit de réassigner la bonne version d'illustrator aux fichiers .ai en cochant bien "toujours utiliser ce programme pourr ouvrir ce type de fichier"
    Et voilà ça remarche !!!
    J'ai trouvé cette solution ici et ça marche !! : Impossible d'éditer les objets dynamiques

  • Impossible de modifier durées de transition

    L'ecran de modification des attributs de la transition n'apparait pas

    -Allez dans le dossier où se créés les objets dynamiques :
    C:\Users\Votre nom\AppData\Local\Temp
    vous trouvez vos objets dynamiques en .ai et .psb
    - Il vous suffit de réassigner la bonne version d'illustrator aux fichiers .ai en cochant bien "toujours utiliser ce programme pourr ouvrir ce type de fichier"
    Et voilà ça remarche !!!
    J'ai trouvé cette solution ici et ça marche !! : Impossible d'éditer les objets dynamiques

  • Modifying Selection screen dynamically

    Hi guyz
    herez another question
    Can we modify selection-screen dynamically  as we do in case of screen
    What i want to do is
    I want to display one parameter as  checkbox and when user ticks this box I want to display another one
    If we are defining two checkboxes earlier and making one invisible than can we modify selection screen to display another check box
    Thanks in advance

    Take a look at this example.
    REPORT EVENT_DEMO.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
      PARAMETERS: R1 RADIOBUTTON GROUP RAD1 DEFAULT 'X',
                  R2 RADIOBUTTON GROUP RAD1,
                  R3 RADIOBUTTON GROUP RAD1.
    SELECTION-SCREEN END OF BLOCK B1.
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
      PARAMETERS: R4 RADIOBUTTON GROUP RAD2 DEFAULT 'X',
                  R5 RADIOBUTTON GROUP RAD2,
                  R6 RADIOBUTTON GROUP RAD2.
    SELECTION-SCREEN END OF BLOCK B2.
    AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD1.
      IF R1 = 'X'.
        MESSAGE W040(HB).
      ENDIF.
    AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD2.
      IF R4 = 'X'.
        MESSAGE W040(HB).
      ENDIF.

  • [svn:osmf:] 13538: Modified the RTMP dynamic streaming sample to use the new SMIL plugin.

    Revision: 13538
    Revision: 13538
    Author:   [email protected]
    Date:     2010-01-15 16:26:36 -0800 (Fri, 15 Jan 2010)
    Log Message:
    Modified the RTMP dynamic streaming sample to use the new SMIL plugin.
    Modified Paths:
        osmf/trunk/apps/samples/framework/DynamicStreamingSample/.actionScriptProperties
        osmf/trunk/apps/samples/framework/DynamicStreamingSample/src/DynamicStreamingSample.mxml
    Removed Paths:
        osmf/trunk/apps/samples/framework/DynamicStreamingSample/src/org/

    But DynamicStream.as is part of the code base and the does get executed.   Jody, which version of DynamicStream.as is more current?   The one that ships with FMS 3.5 or the one in tools?
    Can anyone answer my original question (I think) which is: should I be able to switch source = http://dynamicStream1.smil -> source = http://dynamicStream2.smil and back and forth etc.  It seems to work.    Are there any caveats?  I am not switching back and forth between flv-s and smil-s
    It turns out that there are a couple of lines of code in NCManger.as::bitrateMatch() which is concatenating the streamName and this results in 404 on the FMS side.   I'm not sure what this is supposed to do or if this is just a bug, but the upshot was that I could not specify source = http://dynamicStream.smil on a remote server.  The uncanny part of this issue is if I serve the same smil locally, referencing remote remote smil and media, it works.  Maybe this has something to do with the bit rate.    Bottom line is that this cost me 3 days, becuase I was under the incorrect impression that you could not reference *.smil directly and I blindly followed the handrail provided by the the FMS videoPlayer sample.  Shame on me for trying to leverage working code shipped with a production version.
    NCManger.as::bitrateMatch()
    if  
    (_streamName != null
    ) {_streamName += _streams[whichStream].src;
    My incling is to change the += above to an = and get on with it.
    If someone at adobe or anywhere can have a look and give me some other guidance, it would be much appreciated.
    Thanks to Sean for the kind and detailed responses and giving me the green light that source=http://dynamicStream.smil _should_ work.
    Thanks to all.

  • Impossible de modifier la durée des transitions dans IMovies 10.0

    Impossible de modifier la durée des transitions dans IMovies 10.0 / Mac OS Mavericks 10.9

    1. remove xulrunner, icecat, and wireless_tools (assuming you didn't already remove wireless_tools when it asked you about it)
    2. install icecat again but this time modify the pkgbuild (change the depends  xulrunner=1.9.2.4 to xulrunner=1.9.2.6)
    (the package was failing to build because the icecat pkgbuild specifies a specific version of xulrunner and the maintainer never changed it when the new version of xulrunner came out.)
    Last edited by tjwoosta (2010-07-06 03:31:46)

  • Transaction ABAV, ABUM, ABSO is impossible to modify line items values

    Hi experts,
    In transaction ABAV (similar problem is also in tr. ABUM, ABSO) is  impossible to modify line items values (foe example for depreciation area 50).  We tried to use standard (200) and non standard transation types (for example Z03), but system doesn´t allow to modify line item values. This problem apeared only in quality assurance system in each klient.
    The value for depreciation area 50 is changed and the line Items changes are confirmed with ENTER.
    When line Items are opened again, there is no changed valiue for depreciation area 50...
    Thank you for a answer

    Hi Bernhard,
    the notes:
    743667 - is not for my SAP release (we have SAP_APPL 600 patch 15 )
    977233 - The requested SAP Note is either in reworking or is released internally only
    758279 -  is not for my SAP release
    In the development and production environment can be changed, but not on the test system.

  • Je souhaite creer des objets type image, graphique, ou texte qui sont réutilisé dans de nombreux documents mais je veux pouvoir modifier l'objet type et qu'il soit modifier dans chacun des documents ou il est présent. Comment faire? par avance merci

    je souhaite creer des objets type image, graphique, ou texte qui sont réutilisé dans de nombreux documents mais je veux pouvoir modifier l'objet type et qu'il soit modifier dans chacun des documents ou il est présent. Comment faire? par avance merci

    Bonjour Loic,
    Je te remercie pour ta réponse. Je réponds moi aussi un peu tardivement, ayant quelque peu laissé le problème de côté en attendant de trouver une solution. Mais merci pour ton retour.
    Ton approche est en effet très intéressante, je n'avais pas du tout pensé à aborder le problème sous cet angle !
    En revanche, j'ai du mal à imaginer comment retravailler ma base de données de façon à ce qu'elle entre dans le cadre de ce que tu proposes.
    Actuellement, pour résumer, ma base est grossièrement organisée de la sorte :
    Produit
    P2O5
    N
    Zn
    CaO
    Mgo
    Produit 1
    23
    3,2
    1,2
    Produit 2
    4,3
    2,2
    Produit 3
    26
    Chaque colonne correspond donc à une balise XML, et mon code XML donne donc par exemple ceci :
    <BLOC>
         <Produit>
                   <NomProduit>Produit 1</NomProduit>
                 <P2O>23</P2O5>
                 <Zn>3,2</Zn>
              <CaO>,2,2</CaO>
         </Produit>
          <Produit>
                   <NomProduit>Produit 2</NomProduit>
                 <N>4,3</N>
                 <MgO>2,2</MgO>
         </Produit>
          <Produit>
                   <NomProduit>Produit 3</NomProduit>
                 <N>26</N>
        </Produit>
    </BLOC>
    Comment retravailler ma base, de façon à ce que les différentes valeurs <quantité> correspondent aux bon termes <elements> pour chaque produit, et comment inclure différentes valeurs <quantité> et <element> pour un seul et même produit dans ma base ?
    J'ai du mal à visionner comment réaliser cela..!
    Je te remercie d'avance pour ta réponse,
    Fabien

  • InDesign objets dynamiques

    Bonjour,
    Je travaille avec la version CC et aujourd'hui je cherche à savoir s'il existe une possibilité dans InDesign de créer/gérer des objets dynamiques à la manière de ceux que l'on gère dans Photoshop.
    Pour décrire plus précisément mon besoin : je gère un grand nombre de documents dans des langues différentes. Chaque doc dispose d'une zone "contact" propre à chaque langue. Créer un objet "contact" par langue me permettrait de gagner du temps à chaque mise à jour des coordonnées...
    Merci pour vos réponses

    Non je ne cherche pas à faire du publipostage (les docs sont destinées à être exportés en PDF et mis à dispo sur un site web). Cette zone de contact est une zone au verso de ma fiche qui résume les contacts commerciaux (tel, web, email, réseaux sociaux...).
    Cette zone est identique pour chaque fiche d'un même pays (X fois pour chaque produit).
    Pouvoir éditer uniquement cette zone indépendamment permettrait de mettre à jour l'ensemble des fiches produit pour une même langue. (Photoshop fait ça très bien)
    C'est plus clair ?

  • OBIEE 11g Answers with UNIONs impossible to modify

    Hi Guys,
    I'm upgrading from OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5; after the upgrade using the upgrade tools I find out a problem in the upgraded answers that presents UNIONS in the Criteria.
    The upgraded Answers that have UNIONS apparently works great, but if you try to modify them it is almost impossible, if you modify a formula in one of the criteria in union the same change has replicated in all other criteria.
    Did anyone find this problem?
    Any feedback to overcome it without rebuild all the answers from scratch?
    Regards,
    Daniele

    My two cents, and you might not like the answer...but OBIEE is an analysis tool, not an ETL tool. I'd suggest implementing this logic in your DW / mart load. Not that it can't be done in OBIEE...it just probably shouldn't be.
    My two cents!
    Scott

  • Is it impossible to modify a RAW file in Photoshop?

    I needed to modify an image using the clone tool in Photoshop and opened the RAW file from Lightroom in Photoshop to make the modification. When I saved the image it saved as 'filename-Edit.tif' next to the RAW file. I added that image to my catalog so I could keep track of it.
    What I really wanted to do was to make the modification to the RAW file and save by overwriting the old RAW file.
    I think that may not be possible.
    Could someone here tell me why the RAW file could not be modified in Photoshop. Is this to ensure that the RAW file will remain original, with modifications only appearing in the sidecar .xmp file? This is fine and good, but just wanted to make sure that that is the only way it can be done and that modifications in Photoshop will yield a new separate file upon saving.
    Thanks,
    Ken

    What I really wanted to do was to make the modification to the RAW file and save by overwriting the old RAW file.
    That is indeed as you found out impossible.
    Could someone here tell me why the RAW file could not be modified in Photoshop.
    The reason is that the RAW file is a mosaiced file with direct sensor data at each pixel. Usually two out of four pixels have a green filter, while 1 out of four have a red and another 1 out of 4 a green pixel. The data is usually stored with 12 or 14 bit precision for each pixel. All this is inherently incompatible with the pixel model of a program like Photoshop. To edit such files in Photoshop, you need to demosaic them to full three-channel RGB data, render them into a certain color space, gamma correct them, sharpen them, etc. This is what ACR and Lightroom do for you. So you cannot edit the underlying data using Photoshop. If you edit in Photoshop, you will always have to create a new file.
    P.S. you might have noticed that the edit in Photoshop creates a far larger tif file than the original RAW. This is because of the Bayer mosaic. Say you have a 12 MP camera. When shooting 12-bit RAW, this will result in a 18 MB uncompressed dataset (12MP*12bits/(8bits/byte)= 18MB). Saved losslesly compressed and including a jpeg preview that gets you approximately to 12 MB for a typical RAW file from that camera. When you render this into a 16 bit tiff, you suddenly need a full 3x16=48 bits per pixel! So this results in a 72 MB uncompressed tiff file, which will probably compress to about 50% of that. More than 3 times larger than the original RAW!

  • Modifying alarm setpoints dynamically

    How can I modify the alarm settings for my database points through a control in a Lookout application? For example I have a numeric value being monitored, and H and HH alarm points configured, but I want the operator to be able to modify these through a manual entry (pot, etc.) if necessary.

    FadiHindi,
    You cannot change the alarm configured for the object dynamically. However, you can achieve the similar results using a separate Alarm object.
    In the Alarm object, the 'Signal' datamember would be your original object you want the alarm on. And for the HIHI, HI, etc., you can specify either contant values or other object like Pots and expressions that evaluate to a numeric value.
    Hope this helps.
    Regards,
    Khalid

  • How to modify POF config dynamically?

    we have a application framework developed in C# .NET which includes 5 applications renning under that.
    my application is running under this framework. I am rading my POF Config entry from app.config of main applicacation(framework)
    I can not add seperate app.config my my application. Also i can not modify the main coherence-pof-config.xml.
    Now the problem is, for my application i want to add new user type in my pof-config file dynamically. how to add that?
    Please help...

    Hi Nick,
    you can specify the <serializer> in the distributed-scheme or other similar scheme elements in the cache configuration file, and it can take an init param specifying the locator of the file name.
         <distributed-scheme>
              <scheme-name>loader-scheme</scheme-name>
              <backing-map-scheme>
                   <local-scheme />
              </backing-map-scheme>
              <autostart>true</autostart>
              <serializer>
                   <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
                   <init-params>
                        <init-param>
                             <param-type>string</param-type>
                             <param-value>pof-config-other.xml</param-value>
                        </init-param>
                   </init-params>
              </serializer>
         </distributed-scheme>Output:
    ... (thread=main, member=n/a): Loaded cache configuration from resource "file:.../coherence-cache-config-poftest.xml"
    ...(thread=DistributedCache, member=1): Loading POF configuration from resource "file:.../pof-config-other.xml"Best regards,
    Robert

Maybe you are looking for