Impossible envoyer SMS avec I Phone 3GS
Il m'est impossible d'envoyer des SMS avec mon I Phone 3GS depuis la dernière mise à jour de l'IOS
Can you help me.
Thank you for your help
tu branches via usb à itunes. Itunes va faire apparaitre ton iphone dans la colonne de gauche, clique dessus et suis les instructions. Bonne chance
Similar Messages
-
Bonjour
Tout allait bien avec mon IPhone jusqu'à présent, sauf que ce matin, j'ai reçu un appel et oups la sonnerie a cessée et plus rien, écran noire totale...
depuis ce temps, même lorsque le téléphone sonne je ne vois absolument rien pas même qui appel , et je ne peux pas faire d'appel car je ne vois même pas le clavier.
qu'est-ce que cela signifie et que puis-je faire.
MerciEgypt:
http://www.apple.com/eg/iphone/
http://www.vodafone.com.eg/
http://www.mobinil.com/
Switzerland:
(french) http://www.apple.com/chfr/iphone/
(german) http://www.apple.com/chde/iphone/
be well! -
Sms classé comme mms donc impossible envoyer du texte mais possible d'envoyer ,une photo
Bonjour,
Depuis la dernière mise à jour du logiciel Apple sur mon I Phone 3GS, je ne peux plus envoyer ni répondre aux SMS. Par contre, je peux envoyer les MMS.
J'ai remarqué que lorsque je veux écrire un SMS l'Iphone sur la barre du haut n'indique pas SMS mais MMS.
Je pense qu'il y a un problème dans la nouvelle mise à jour.
Pouvez-vous m'aider ?
Merci d'avance.Bonjour Rodéric,
Merci encore pour ta réponse.
J'avance lentement ... mais j'avance
j'arrive à détecter mon RS232 (convertisseur USB à RS232),et voir à quel COM il correspond ...
je n'ai pas encore mon voltmètre ou oscilloscope, mais j'e vérifierais après pour le signal à la sortie de mon RS232.
ma précédente question peut être reformulée ainsi :
serait ce possible de controller mon moteur pas à pas directement par le RS232, car d'après mes lectures ca fonctionne ainsi :
INTERFACE de lutilisateur (logiciel ou hardware) : envois des commandes à l INDEXER (controller, microprocesseur)
INDEXEUR : envois des pulses (numérique) au DRIVER (amplificateur)
DRIVER : envois le courant au MOTEUR (pas à pas)
ma question est : serait ce possible d'aller de l INTERFACE (LabVIew) au MOTEUR
sans l'INDEXEUR et le DRIVER?
merci, car je ne comprends tj pas comment passer des pulses de la sortie du RS232 au courant qui fait tourner le moteur !
merci pour votre réponse
amayas -
Peut on envoyer des sms avec un IPad même si on a mît une carte sim ?
Voilà, je ne comprend pas que si j'ai une carte sim je ne peut pas envoyer de sms.
Et ça fait des semaines que je cherche a trouver une solution mais je n'y arrive pas .
Y aurait il une solution pour envoyer des sms avec un iPad ?Bonjour,
Regardez dans le coin supérieur gauche de l'écran de votre téléphone, il va dire qui vous êtes connecté avec (réseau) Si elle dit: «Pas de service», alors vous n'avez pas de carte sim. Tu ne peux pas envoyer des sms de vous iPad mais vous pouvez envoyer un iMessage qui est comme un service SMS gratuit d'Apple.
J'espere Que this aide,
(Je parle anglais, Fait j'espere Que c'est correct)
<Edited By Host> -
Comment envoyer 1 sms avec accusé réception?
Comment envoyer un SMS avec accusé réception sur 1 i phone 3gs
merci pour cette réponse, mais le problème est que j'ai un timer, lié à l'utilisation de mon moteur, et je ne lis donc pas toutes les valeurs, donc si je fixe ma consigne à 0, mais que ça tombe un tour où le 0 n'est pas lu par exemple, le signal ne sera pas envoyé.
en fait mon problème est comment à partir de la courbe par exemple, ou du tableau, quand je repars à 0 (mais pas forcément exactement à 0 donc), dire que le signal peut être envoyé (sans qu'il y ait trop de décalage d'un tour à l'autre) -
i cant activate ios 6 in my phone 3gs via itunes,they send me a sms ;"We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care."
You either don't have a SIM in the phone, which is required to activate it, or the phone was hacked to unlock it and is now a paper-weight.
-
Peut-on envoyer un sms avec labview
Je désire envoyer un message sms avec labview 7.0
Bonjour,
Effectivement, c'est possible d'envoyer un sms avec LabVIEW. Ci-joints quelques liens qui vous aideront à effectuer cela :
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=50650000000800000089910000&ECategory=LabVIEW.LabVIEW+General
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000C5410000&ECategory=LabVIEW.LabVIEW+General
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=50650000000800000024300000&ECategory=LabVIEW.LabVIEW+General
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=5065000000080000005F4C0000&ECategory=LabVIEW.LabVIEW+General
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&
RNAME=ViewQuestion&HOID=50650000000800000081C30000&ECategory=LabVIEW.LabVIEW+General
Ci-joint également une librairie de programmes qui pourra vous intéresser
Sanaa TAZI
Applications Engineer
National Instruments
Attachments:
Nokia.llb 306 KB -
Can not turn I phone 3GS on !!!??
My I Phone 3GS went off.... I thought the battary is dead, so I put it o the charger over night, but still can not turn it on.
FYI - it is impossible to do an iPhone reset with an iPhone that is not powered on. Unless I read what was provided wrong, the iPhone powered off and after being connected to a power source overnight has not powered back on.3
you are right- unless phone went into coma mode
if a reset fixes problem- i would upgrade to 3.1.2 -
Sending Class 2 SMS from mobile phone
hi all,
i need to send Class 2 SMS (data coding scheme, dcs class 2) from mobile phone to another. But due to WMA 1.1 Spec all SMS must be class 1. So, is it impossible to send class-2 SMS from mobile phone??!
The platform is nokia s40. Any suggestions?
Thanks!
dmHello,
I need some help for my project....I'm working to an application who send a SMS from a PC tu mobile....Onto mobile I need to install a j2me application that receive the SMS from PC and send that SMS to other PC (using infrared or bluetooth)... I wait for advices.
Thank you! -
help..help...my i phone 3gs after upgrading to ios 5 for few hours thn my phone "pass away"total cannot on anymore.how to solve this problem.tq
Thanks for the clarification. Yes, I do access my email from 2 different sources.
FYI, I use the POP mailserver as I need most of the information to be loaded onto my PC while on a plane / not connected to the interenet.
The primary use of mail on my iPhone is to be available as much as possible - even when I'm away from my office.
Thanks again for your help. I'll start deleting them in segments of 100....... -
I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1
I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated. -
I phone 3gs wont show up in Itunes, it worked in the store, the phone is recognised as a camera by the computer, but not in itunes. itunes recogises my ipod. I have taken every step on the troubleshooting page even the unistall and reinstall i have vista
iOS: Device not recognized in iTunes for Windows
-
got a question for all you peeps
dos anyone know about i phones i have a i phone 3gs which i got unlocked i did a master reset or summin and just had a pic of apple so i plugged it in i tunes downloaded and it now says no service at the top of phone and i tunes says invalid sim i put the correct sim in it used to be locked too and still says same pls any one with ideas?hi sorry what happoned is that ages ago i brought a i phone 3gs on 02 network i went to a sml phone shop and payed for them to unlock it. it has been fine till yesterday when i went to reset it from the phone it then turned off and came back on just just an image of a apple for about an hour so i connected to i tunes and it said downloading software after another hr it had finished but then i tunes said in had to insert a sim so i had to un plug the phone from laptop while i did this i put my orange sim in and the i phone said where do i live and had to connect to a internet connection but all the time saying no service where the signal bar is and then says activating i phone it took a few min and said couldnt finish it bec of the signal and to connect it to i tunes to do it so i connected it to itunes and i tunes just keeps saying invalid sim so i took my orange sim out and put a 02 sim in and is still saying invalid sim on itunes?
-
Hello there, i have an i Phone 3GS which was locked on the network Orange from U.K i finished the contract last year, but some how i cant unlock it to be able to use on a different network. tried to restore it on itunes but it says unable to process at this time.
under UK legislation, if your are out of contract (and not owing the carrier any debts!) they are LEGALLY obliged to unlock you, and within a certain number of (few) days.. search OFCOM for the regulations.
That said, they are also entittled to charge you for this (usually about £20!)
I believe, that this can also be done via an APPLE STORE, but the first option is always the Origional Network carrier.
Orange has a terrible repuation now for customer service (which is just one reason they changed their name to EE!, and yes, this is fact which is why they came Bottom in several recent customer satisfaction surveys.. so they are not going to rush to help you leave them are they..) -
I have downloaded the Apple Remote App to my phone (3gs) can't get it to connect with my iTunes library?
http://support.apple.com/kb/TS1741
Maybe you are looking for
-
Add button to RF Standard transaction
Hello, Is it possible to add a push button to an RF Standard transaction? and How? Thx
-
Laserwriter problem: the network host is busy ...
HI, My Intel iMac is connected to a LaserWriter 16/600 PS. I have used this printer for many years. I have always worked even with my Intel iMac. This morning trying to use it as usual I got a print error message, telling me: "reversible problem:
-
Hi, I have created error.jsp page also added in web. XML but it is not catching exception error.jsp <body> <h2>Your application has generated an error</h2> <h3>Please check for the error given below</h3> <b>Exception:</b><br> <font color="red"><%= ex
-
Hi gurus, I have to block tranfer values for project`s on CJ30. I`m looking for a User Exit or BADI to CJ30 txc. I tried to use the prefix CNEX* User Exit`s but is not triggering. Thanks in advance. Andrew
-
How to make/receive call from a laptop connected to a smartphone through bluetooth?
Dear Lenovo Forum, I have a smartphone (Samsung SCH-I759) which I would like to connect to ThinkPad Edge E440 running on Windows 7 Professional so I could make/receive phone call on the laptop. Having been browsing around, I saw several methods on do