Impossible to Access to Transformation of Cube, after it was modified

Hi,
I've a problem...
I added two key figures on my existent Cube. After it,
I've modified transformation of the cube for one of this new key figures...
I saved transformation
and now I can't access to this transformation in Modify, when I try to
modify this transformation system give me this error:
Runtime Errors ASSERTION_FAILED
Short text
The ASSERT condition was violated.
Could someone help me?
Are there some OSS notes?
thanks in advanced
Federico
P.S.:
My system is SAP BI 7 with SP 13

Hi,
Check SAP notes : 1114409, 1106705, 1137447, 1176495 .
Search on SDN you will find many threads on this.
Arminder

Similar Messages

Compare data in R/3 with data in a BW Cube after the daily delta loads

Hi Friends,
How can I compare data in R/3 with data in a BW Cube after the daily delta loads? Are there any standard procedures for checking them or matching the number of records?

Hi Sunil,
If you want to check the records daily instead of checking the data in R/3 manually ......
You can try this...
If you have staging DSO(level 1) that means whatever data is in source system load it to Staging DSO without any routines or any modifications.
Now load this DSO data to Cube or DSO(level 2) as per your requirement with routines etc.
Now Staging DSO contains Source system data.
Now the level 2 Cube or DSO contains BW data with some modifications.
Now create a Multiprovider based on level 1 and level 2 data targets.
Now create a report on which keyfigures you want to test the data.
In Multiprovider there is a field called 0infoprovider in data packet dimension.
you can drag this infoprovider to the columns and restict your keyfigures with level 1 and level 2 data targets.
In the first column you can see the level 1 DSO data ( source system data),in the 2nd column you can see the BW data.
Now create a formula which gives the diffrence b/n level 1 and level2.
that is R/3 data - BW data.
If the diffrence is zero both R/3 and BW data are same.
if the diffrence is not eqaul to zero check whether any routine is there or not.

I lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now..

i lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now.. im wonderin if ist safe coz all my emails are there and all personal info..i hope someone could answer me..i reported to the police the ist step..coz when it happened ..policemen are there..then i went to the nearest MAC center and tried to track it..but its offline..so they asked me if i want to remote lock it..then i did...which i think the mcreason why i cant track my phone beacause its locked?? or not until they connect to wifi or 3g but its unabling them because i locked it..?

but when i do remote wipe ..it will erase everything in there and i cant track down the phone anyomore?

Error when activate Transformation to cube 0IC_C03

Gurus:
I need to activate the 2lis_03_bf_tr transformation to cube 0IC_C03, when I activate the transformation, the system indicate the next error:
"E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE"."
I made changes in the routine, but the error still happens
Thanks for your help!!!!
César.

It seems like you have migrated the 3.x data source to 7.0x version. And I believe you have added new info objects. In the start routine code add the new info objects to the structure "_ty_s_*_" whenever you add new fields.
In the code in the
"Rule Specific Types"
"Types"
"BEGIN OF tys_*_"
Add the info objects.
*Please assign any rating if you find the answer helpful*
Edited by: ram.pch on Jul 2, 2011 6:02 AM

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

I can't access to my app store after update to IOS 7.

I can't access to my app store after update to IOS 7. It write that " Cannot connect to the App Store. You must connect to a wi-fi or mobile data network to access the app store". But, in fact, my mobile data is running well. Any solution?

Hi iwern,
Thanks for using Apple Support Communities. This article has steps you can take if you're unable to access the iTunes Store or App Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
- Ari

ERROR WHILE ACTIVATION OF transformation in cube?

hi friends,
i am getting below error while activationg my transformations in cube, please let me know solution, how to assign field to infoobject, which tab i need to use.
Rule (target: S1_SUN, group: 01 Standard Group): Conversion type missing
Rule 2 (target field: S1_SUN): Field /BIC/S1_SUN must be assigned to an InfoObject
Rule (target field: S1_SUN): No source unit assigned
regards
suneel.

Hi Suneel,
Hope u doing good!
Well in case of BW 3.5 if you have worked on it. To extract data to a cube or dso we use the standard process of creating infosource,linking it to datasource and creating infopackage. In infopackage we determine the characteristics of the extraction, for eg: should it be delta or full, what would be the error handling method so and so forth.
Well in case of BI 7.0 and higher we no longer need to use the long way. On the concerned Infocube you can right click and hit on create Data Transfer Process which would pop up with another window asking you where your data is residing, you can choose from the options specify the source system and then create the DTP instance.Which it is being created the system generates some rules automatically. This is what I was talking abt. Once you have created you can configure it as if you were configuring the Infopackage.
The update rules which are automatically generated can be checked by clicking on it and seeing if all the rules are appropriate.
Hope I am making it clear for you.
Good Luck,
Raj

Poor performance when accessing a MSAS 2008 cube via BI Server

I am having an issue with performance when accessing a MSAS 2008 cube via the BI Server.
I think it has to do with the way that the MDX is being generated.
Please could someone advise on any settings I could try or any known issues with the integration?
Thanks,
Kim Sarkin
[email protected]

Hi Kim,
Sorry I can't help out, but, I'm curious how you got the AS 2008 drivers installed for use with OBIEE? I have an AS2008 environment, but, my OBIEE version only supports 2000 and 2005.
Thanks,
Mark

How can I access keywords in adobe bridge after labeling them?

How can I access keywords in adobe bridge after labeling them?

There's a search box in the upper right corner of Bridge. Just type in the keyword and it should show up in the Content Panel.
What if you want to save your search in a Smart Collection? A folder that would permanently hold the results of your search?
You'll love this video.
http://www.lynda.com/Photoshop-tutorials/Using-smart-collections/97619/103735-4.html
Gene

I have activated the genius for Ipad and the message that It was a success never disappears . It is impossible to access the itunes or apple store. What can I do?

I have activated the genius for Ipad and the message that It was a success never disappears . It is impossible to access the itunes or apple store. What can I do?

You have encounter Activation Lock, the antitheft feature of the iPhone. The previous owner did not remove the phone from their account. The phone cannot be used until they do. Return to the store and let them sort this out. It is very unusual for someone to "forget" to disable activation lock, as it is necessary to do so to erase personal information on the phone. So it is quite likely you bought a stolen phone.

Javax.management.RuntimeMBeanException:Unable to access or transform markup

I have a portlet that I created from an ADF application using the JSF Portlet bridge. I created the application/portlet in JDev 11.1.1.6. I am able to run the application locally and I am also able to display the WSRP Producer Test Page for the portlet (running on the Integrated WebLogic Server). I am also able to bring up the WSDL. We have a test WebCenter application running and when I try to register my portlet as a portlet producer I get the error javax.management.RuntimeMBeanException:Unable to access or transform markup when I click the OK button on the Register Portlet Producer page. Before clicking the OK button I clicked the Test button and I got the Test Connection Successful message.
Any ideas on what could be causing this error? Where could I go to get more information about the error?
Thanks for the help!

The error "Unable to access or transform the markup from the WSDL URL" indicates that it was not able to resolve the WSDL URL. Check whether you are able to resolve this from the server and also you might have given random values to the proxy host and port values. The URL need to be resolved during registration so make sure you are providing the right host port values during update.

Impossible to access the website addons firefox, all other websites works

impossible to access the website addons firefox, all other websites works.
Almost all pages of mozilla get the same message!
Impossible to add troubleshooting informations too!
I get this message.
Firefox ne peut trouver le serveur à l'adresse addons.mozilla.org.
Veuillez vérifier la syntaxe de l'adresse (saisie de ww.exemple.com au lieu de www.exemple.com par exemple) ;
Si vous n'arrivez à naviguer sur aucun site, vérifiez la connexion au réseau de votre ordinateur ;
Si votre ordinateur ou votre réseau est protégé par un pare-feu ou un proxy, assurez-vous que Firefox a l'autorisation d'accéder au Web.
ALL OTHER WEBSITE WORKS
-I reinitialize firefox
-I check my firewall and antivirus
-I empty the cache and cookies
try everythings...
Thank you for help me quickly
Murielle

Nothing happend.
I have the same problem on Chrome.
Only for the website Mozilla, even cant access the download page!

Has Microsoft made changes to hotmail that now render it impossible to access from a Mac?

For the past week or so, I have been unable to properly access my hotmail. I have a MacBook Pro running Firefox 14.0.1 and Safari 5.1.7. Firstly, hotmail asks me to upgrade my browser, when all are up to date. Secondly, when I am in hotmail, i cant send or read any messages because once I click on a message, i am redirected to "compose new message" before being redirected back to the hotmail home page. I can access some features of hotmail using Firefox, but I still cant send emails (I cant type any text into the message). Has Microsoft made changes to hotmail that now render it impossible to access from a Mac?

Keep in mind, you're using a Microsoft based email client on a Mac.
You may find it easier to setup your Hotmail account with in the Mac Mail application. That way you can avoid having to access your mail via Safari.
Launch Mac Mail. From the Mail menu bar top of your screen click Mail > Preferences then select the Accounts tab then the Account Information tab.
Under Accounts on the left click + (plus)
Enter your name, your Hotmail email address and password then click Continue. Just follow the instructions.
When there is new mail, you'll see a red badge on the Mail icon in your Dock.

Hello! I cant't access home on my IPad after update 7.1.2 .. I slide to open it but i get an empty screen then it turned off and turn on, but still can't access my IPad, please help!!

hello! I cant't access home on my IPad after update 7.1.2 .. I slide to open it but i get an empty screen then it turned off and turn on, but still can't access my IPad, please help!!

I had the same problem but looking at what everyone else said, I simpley slowly started to click on all the tabs in the app store, let them load completely, and then clicked back to the updates afterwards. It worked after a little while

Impossible to go back to wifi mode after ethernet back-up?, Impossible to go back to wifi mode after ethernet back-up?

Impossible to go back to wifi mode after ethernet back-up?
I explain : i just bought time capsule, everything works while in wifi. but if i want to make my 1st time machine backup (1T, to heavy for wifi...) and I want to use an ethernet cable, I have to disconnect the wifi mode in the airport utility, to allow the ethernet connection tu function.
That works fine, BUT, once the backup is completed and i want to switch back to normal wifi mode, NO WAY, the time capsule led turns orange and airport doesn't locate the TC anymore.
any ideas?

ps : my TC is connected wifi to the ADSL router, it has no separate network.
....I'm kinda desperate...! :-(
Here is the trouble..
You have used the TC the wrong way.. this is "Join a wireless network"
When you use the TC in this mode.. the ethernet ports are shut off.. actually even the wireless becomes a dumb client of the main router.. this is the poorest method to setup the TC.. don't do it.. ever. You will decrease wireless speed by at least 50% if not more.. and it will be flakey and terrible.
As I said, reset the TC.. the TC must be in router mode or bridge mode.. but the backup can be done in isolation from the network. If the TC is in router mode it will just work as network disk when you have it plugged in.. do not worry about errors.. when you are finished the backup and want to use wireless.. change the TC to bridge mode and plug it into the main router.. never use wireless links to non-apple routers.

Impossible to Access to Transformation of Cube, after it was modified

Similar Messages

Maybe you are looking for