Impossible to create a new JCO

Hi everybody,
After deployement of my web dynpro project and the right configuration of my SLD,
i want to create a new JCO.
But, when i enter a Name for the new JCo, i obtain always
the same error:
"Please Choose another name for the new JCo destination. The defined name "gnagna" is used in the SLD.
For information, it is the first time that i create JCo and SLD.
Any suggestions ?
Thanks !
Rodolphe.

Hi,
Navigate to Content Administration--> WebDynpro
Click on Maintain JCO Destinations.
You will find the list of JCO destinations already created. select "gnagna" from the list and click on the create link to specify your destination details.
Regards,
Murtuza

Similar Messages

Using modem Sagem f@st 3464 (Scarlet One : vdsl tv VoIP wi-fi) : impossible to create a new Wi-Fi network (2.4 or 5 GHz) ? Conflict with DHCP / NAT and so on. No answer from the Apple help desk, Air Port Utility 6.1 unusable (configuration = Win 7)

Good afternoon,
My internet connection is delivered by a modem Sagem f@st 3464 (Scarlet One : vdsl tv VoIP wi-fi), it's almost the same than a BBox-2 from Belgacom (software and configuration).
This modem has 4 ethernet port, 2 for TV, 2 for LAN, the WAN port is RJ-11 and the connection is a PPPoE (in fact, it's the Belgacom network). I also got a Wi-Fi 802.11g on it.
The main raison why I bought a TC is the dual Wi-Fi 2.4 GHz and 5 GHz (for 802.11n), especially for my MacBook Pro and my iPad 3.
First of all, can I do the following with my TC :
1) connecting the TC using a ethernet cable from one of the two modem's LAN ports to the TC's WAN port
2) create a new Wi-Fi network using the TC ?
Up to now, after 2 man days of configuration, my TC is connected to my existing LAN network, as a bridge, but there is no new Wi-Fi network.
The Airport Utility 6.1 "Wizard" is just un-usable and I need to use a Win 7 laptop in order to get access to all the configuration !
The standard manual is very poor.
Does someone already create a new Wi-Fi network using its TC connected by Ethernet on a modem/router device ? How do you set up the DHCP (and NAT) ? Which range did you use ?
Sincerely yours,
AVDB

1) connecting the TC using a ethernet cable from one of the two modem's LAN ports to the TC's WAN port
2) create a new Wi-Fi network using the TC ?
Does someone already create a new Wi-Fi network using its TC connected by Ethernet on a modem/router device ? How do you set up the DHCP (and NAT) ? Which range did you use ?
This is easy enough to do..
Plug the TC directly into a computer.. without other connections to do the setup.
Using the newly installed 5.6 utility.
Bridge the TC.
Create a wireless network.
This is an older screen shot and I would set security to WPA2 Personal only not WPA/WPA2 Personal as shown above.
I do recommend you use wireless names that are short, no spaces, pure alphanumeric.
Update the TC..
Now plug it into the modem router.. it will be a part of the network without doing NAT and DHCP itself.. which you do not want.. that leads to double NAT issues.. but it is a WAP that provides access to devices on both 2.4ghz and 5ghz bands directly to the main router.

JCo client connection Failed to create new JCO client connection

hi All
I am trying to create a new JCO destination ion CE7.1 webdynpro content Admin. but I am getting following error.
Exception while creating JCo client connection Failed to create new JCO client connection weter: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_ACCESS_DENIED: User is not in role LcrInstanceWriterLD at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120) at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.getIResult(SimpleResponseAnalyser.java:53) at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:220) at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:148) at com.sap.lcr.api.cimclient.CIMOMClient.createInstanceImpl(CIMOMClient.java:669) at ......
SLD is Up and running
CIM data is imported
Solution tried :
1) As no role wtih name LcrInstanceWriterLD was existing in the server ,hence created a new role with same name and assigned the LCR related action . Assigned the role to the user through which we are creating JCOs.
But we still getting the same error.
regards
Poonam

Hi Poonam!
Got to dig in the past a bit, I remember Users being able to create SLD object have to have certain permissions set in the J2EE UME. Simple Admin rights do not suffer, if I recall right.
Unfortunately I cannot go further in detail because this issue has been solved by a long gone collegue of mine.
Good luck anyway!
Jürgen

But how do I create a new iTunes backup password without knowing the previous one?

In case anyone keeps track of such things, I'm among those folks who really doesn't recall ever being asked to create an iTunes backup password, but that's irrelevant to my question.
I'm not in any bind. I don't need my backup files to restore anything. I will shed no tears as they are moved to the Recycle Bin (indeed, I will gladly do the deed myself).
That said, it appears impossible to create a new backup password without knowing the previous one.
If the only "solution" is to wipe my iPhone's memory and start from scratch, I will be a sad camper.
Any help? Are backups to iCloud encrypted?
Cheers...

Additionally:
Be super critical & meticulous (and whatever other synonym I missed) when you get a new password:
Write it onto your bedroom wall, or someplace off of a computer that you will always find.
If you active 2-step verification, the key is VERY important. Lose it & you may be toast.
If you don’t 2 step verify, & use the Security Question instead --> do not lose, or forget the answers.
Very nearly the same outcome!!!!!: Bad experience.
If you add a 2nd email address, make sure its a RESCUE address not just an alternate address.
If you lose these, you lose access to your 3rd party purchases via Appstore for future upgrade. That will make you VEWY, VEWY UNHAPPY. Apple new OS versions do update, but add a new device & likely you will be unable to use your content on that device. It will never load if the ID locks up.

Is it possible to create a new table in the master database with SSMS ?

Hello ,
I have problems with this thread :
http://social.msdn.microsoft.com/Forums/en-US/sqlexpress/thread/5153c43b-7844-41c4-a414-d14730abe435/
If no user database has been created , in SSMS , we can see only the 5 system databases ( master, msdb , tempdb... ).
Logically , the user should connect automatically on the Master database ( if the user is the same as this used to install a new SQL Server instance, this user should be sysadmin that's to say he/she has all possible permissions and especially dbcreator ).
Is it true that it is impossible to create a new table on the master database ?
I have done many researches about this possibility , all I have found is the advice : don't touch to the master database. This database is used to store critical information about the instance and its user databases. Even in the last book of Kalen Delaney
about SQL Server 2012 Internals , I have found nothing clear about the creation of tables in this database ( and what about the other system databases ? I am excluding tempdb ).
If someone has an idea about this thread and my questions , I would be thankful for a reply on this thread or on the related thread in the SQL Server Express Forum ( with my poor written English , I am not sure to have poster in a correct and understandable
way ).
If you think that this thread is not in the good forum , a moderator of this forum can move this related thread ( I have not done the move as I am not sure which is the good forum Database Engine or Transact-SQL ... )
Thanks beforehand and have a nice day.
Mark Post as helpful if it provides any help.Otherwise,leave it as it is.

>>Logically , the user should connect automatically on the Master database ( if the user is the same as this used
to >>install a new SQL Server instance, this user should be sysadmin that's to say he/she has all possible permissions and >>especially dbcreator ).
If you add the current user during the installation you can have it as system admin , or you can add him/her later on
in SQL Server. BTW regarding dbcreator I have wrote some blog , need to read... :-)
http://sqlblog.com/blogs/uri_dimant/archive/2010/09/02/be-careful-to-grant-dbcreator-server-role-to-the-user.aspx
You can (if you have needed permissions) to create objects in master database, usually I create objects for instance maintenance (like rebuild indexes...)
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

New JCo is not replicated in other instances

Hi Experts,
there are 4 j2ee instances in our product system. 1 CI and 1 DI in one server, 2 DI in the other server.
after created a new JCo via web dispatcher, I found that the JCo is in undefined status in 2 instances.
why?
all instances are using the same SLD.
Regards,
Sidney

Hi Srinivas,
normally, when created a JCO in one instance, the other instances will be synchronized.
but now the jco is not replicated in 2 DI.
then i create the same jco in these DI, it throws a exception as follow
Exception while creating JCo client connection Failed to create new JCO client connection ZWD_APPR_QUERY_RFC_METADATA_DEST: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Connection ZWD_APPR_QUERY_RFC_METADATA_DEST already exists in the SLD. Please choose another name.
Regards,
Sidney

Create a new routing with BAPI BAPI_ROUTING_CREATE via JCo

I try to create a new routing with BAPI BAPI_ROUTING_CREATE via JCo.
I filled all necessary parameters. I also realized a commit_work. I get in the RETURN parameter of the BAPI the Message "S 000 Routing N/50001641/01". But the routing isn't in the database. Other JCo programs I wrote (create material master or costumer order) are working very well.
Have anyone an idea?
Thanks Jörg
Here's my coding:
public void createArbeitsplan() {
          doLogin();
//          connectionAttributes();
          Plan plan = new Plan();
          for (int i = 0; i < planList.size(); i++)
               plan = (Plan) planList.get(i);
               //Ein Function-Objekt erzeugen
               String bapi = "BAPI_ROUTING_CREATE";
               JCO.Function savePlan = null;
               try { savePlan = this.createFunction(bapi); }
               catch(Exception ex) { ex.printStackTrace(); System.exit(1); }
               if(savePlan == null) { System.err.println(bapi + " not found in SAP"); System.exit(1); }
               //Import und Tabellen füllen
               // Plankopf
               JCO.Table headData = savePlan.getTableParameterList().getTable("TASK");
               headData.appendRow();
               headData.setValue(plan.kurztext,"DESCRIPTION");
               headData.setValue("1","TASK_LIST_USAGE");
               headData.setValue(werks,"PLANT");
               headData.setValue("4","TASK_LIST_STATUS");
               headData.setValue("ST","TASK_MEASURE_UNIT");
               headData.setValue("001","RESP_PLANNER_GROUP");
               headData.setValue("20070101","VALID_FROM");
               headData.setValue("20991231","VALID_TO_DATE");
               headData.setValue("1","LOT_SIZE_FROM");
               headData.setValue("99999999","LOT_SIZE_TO");
               // Materialzuordnung
               JCO.Table materialAlloc = savePlan.getTableParameterList().getTable("MATERIALTASKALLOCATION");
               materialAlloc.appendRow();
               materialAlloc.setValue(plan.material,"MATERIAL");
               materialAlloc.setValue(werks,"PLANT");
               materialAlloc.setValue("20070101","VALID_FROM");
               materialAlloc.setValue("20991231","VALID_TO_DATE");
               materialAlloc.setValue("1","GROUP_COUNTER");
               // Vorgänge
               JCO.Table operationData = savePlan.getTableParameterList().getTable("OPERATION");
               for (int j = 0; j < plan.getAnzahl(); j++) {
                    operationData.appendRow();
                    operationData.setValue(plan.getVorgang(j).vorgang,"ACTIVITY");
                    operationData.setValue(plan.getVorgang(j).steuschl,"CONTROL_KEY");
                    operationData.setValue(plan.getVorgang(j).arbplatz,"WORK_CNTR");
                    operationData.setValue("1111","WORK_CNTR");
                    operationData.setValue(plan.getVorgang(j).text,"DESCRIPTION");
                    operationData.setValue(plan.getVorgang(j).basismenge,"BASE_QUANTITY");
                    operationData.setValue(plan.getVorgang(j).vw1,"STD_VALUE_01");
                    operationData.setValue(plan.getVorgang(j).vw2,"STD_VALUE_02");
                    operationData.setValue(plan.getVorgang(j).vw3,"STD_VALUE_03");
                    operationData.setValue(plan.getVorgang(j).ze1,"STD_UNIT_01");
                    operationData.setValue(plan.getVorgang(j).ze2,"STD_UNIT_02");
                    operationData.setValue(plan.getVorgang(j).ze3,"STD_UNIT_03");
                    operationData.setValue("1","DENOMINATOR");
                    operationData.setValue("1","NOMINATOR");
                    operationData.setValue("20070101","VALID_FROM");
                    operationData.setValue("20991231","VALID_TO_DATE");
                    operationData.setValue("ST","OPERATION_MEASURE_UNIT");
               // Testflag
               JCO.Structure test = savePlan.getImportParameterList().getStructure("TESTRUN");
               test.setValue(" ","BAPIFLAG");
               //BAPI ausführen (incl. Commit)
               mConnection.execute(savePlan);
               JCO.Function commit = null;
               try {commit = this.createFunction("BAPI_TRANSACTION_COMMIT"); }
               catch (Exception ex) { ex.printStackTrace();System.exit(1); }
               JCO.ParameterList input = commit.getImportParameterList();
               input.setValue("X","WAIT");
               mConnection.execute(commit);
               //Messages vom SAP-System holen
               JCO.Table jcoReturn = savePlan.getTableParameterList().getTable("RETURN");
               for (int k = 0; k < jcoReturn.getNumRows(); k++)
                    jcoReturn.setRow(i);
//                    System.out.println(jcoReturn.getField("MESSAGE").getValue());
                    System.out.println(jcoReturn.getField("TYPE").getValue());
                    System.out.println(jcoReturn.getField("NUMBER").getValue());
                    System.out.println(jcoReturn.getField("MESSAGE_V1").getValue());
                    System.out.println(jcoReturn.getField("MESSAGE_V2").getValue());
                    System.out.println(jcoReturn.getField("MESSAGE_V3").getValue());
                    System.out.println(jcoReturn.getField("MESSAGE_V4").getValue());
               JCO.Structure output = commit.getExportParameterList().getStructure("RETURN");;
               System.out.println(output.getString("MESSAGE"));
               System.out.println(output.getString("TYPE"));
               System.out.println(output.getString("NUMBER"));
               System.out.println(output.getString("MESSAGE_V1"));
          closeConnectionToSAP();
          System.exit(1);

Hi,
perhaps you could use
BAPI_HRMASTER_SAVE_REPL_MULT
Regards
Bernd

Failed to create new JCO client connection WD_FLIGHTLIST_RFC_METADATA_DEST:

I tried the demo in SDN, but failed .
Why?

Sorry I forget posting the msg:
for WD_FLIGHTLIST_MODELDATA_DEST:
nnection for 'WD_FLIGHTLIST_MODELDATA_DEST' was sucessfully tested with user 'ZZHZHU'
But :
for WD_FLIGHTLIST_RFC_METADATA_DEST:
Failed to create new JCO client connection WD_FLIGHTLIST_RFC_METADATA_DEST: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection. at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:140) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:286) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:252) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:100) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:299) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:640) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37) at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java:321) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162) Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve connection parameter for WD_FLIGHTLIST_RFC_METADATA_DEST at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestinaton(JCOClientConnection.java:664) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:508) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:247) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:221) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.<init>(JCOClientConnection.java:101) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:138) ... 31 more Caused by: java.lang.NullPointerException at java.util.Hashtable.put(Hashtable.java:474) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestinaton(JCOClientConnection.java:558) ... 36 more

Jco.JCO$Exception when create a new adaptive model in NWDS

HI friends:
when I create a new adaptive model in NWDS, error occurs:
Warning:Creating a connection with Metamodel language <zh_CN> failed. Continuing with language <zh>
Fatal: com.sap.mw.jco.JCO$Exception: Missing R3NAME=... or ASHOST=... in connect_param in RfcOpenEx
but when I used a existent model to reimport model , it has no error
Thank you in advance.
Yonk
Edited by: Yonk King on Nov 7, 2008 11:11 AM

Check whether you are providing the correct login credentials while importing the RFC.

Why is it impossible to import pics into existing projects in Aperture 3.6 ? It forces me to create a new project on every import. Tried to change that in preferences but no luck.

Why is it impossible to import pics into existing projects in Aperture 3.6 ? It forces me to create a new project on every import.
Tried to change that in preferences but no luck.

It is working for me. Two ways to import into an existing project:
Select a project and view it in the browser in split view. If you drag image files from a folder directly into the filmstrip, the dragged image files will be added to that project.
Or select a project in the library, before you open the Import panel. Then you can switch the destination project in the Import Settings from "new Project" to the selected project.
Have you tried these methods? Where does it not work for you?

Creating a new roll in the library, impossible!

Help! I am having difficulties creating a new roll within my library. I have followed the directions in the help menu (i.e. clicking library, selecting the photos i want, file>create film roll) BUT when I go to the file menu, 'create film roll is not an option highlighted. Pleasssse help! Thank you thank you.

Has to be a glitch in iPhoto. First try running Disk Utility and repair disk permissions. Are you at the latest version, 6.0.2? If not update to that and try again. Lastly you might have to reinstall iPhoto from the source disks it came on. To do so you'll have to delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder. Then install iPhoto, apply the latest update and repair disk permissions.

Impossible to buy a book, need to create a new Apple ID

When clicking the box "buy a book" after finishing creating a book, I have to enter my Apple ID and Password, I do it but always landing on a page asking me to create a new Apple ID...
Boring and frustrating !
Thanks for your help.
Cheers

Hi,
I'm desperately trying to solve my problem to Buy Book, using Aperture 3 and MacBook Pro. I have tried using re-entering my current account and creating another account (created in Apple Store and not Apperture), used the Aperture Library First Aid (repaired permissions and databases), transfered the preferences to the desktop etc., only did not restore the library and reinstalled Aperture (bought it over the Mac App Store).
Please help, I realy wish this book.
Thanks!
Lanika, SI

Can't create a new real track...

Ok I've encountered another problem, and this one prohibits me from doing basically anything. The last problem in the post I made with the title "Mysterious crackling/buzzing" seems to have worked itself out (yes!!!). First I'll tell you my setup. I have a guitar (with active electronics if that helps at all which i doubt...) plugged into a Line 6 POD XT Live which connects to my compter via USB and I play through GB on tracks with no effects in Channel 2 (Mono) with the monitor usually on. Well, that is, until now. The only way I can hear my guitar or have any signal through GB is if I'm in a previously saved project which already has tracks on it that are available for recording/playing. I can record and play fine through these tracks, but when I try and create a new track (Real) absolutely nothing happens. I go to track/new track/real/create but bsaically all that happens is...well...nothing. If I have selected a track (which works fine if I created it before the problem started) and I try and create a new one, it just does nothing and hs no effect on the elready existing track I'm on. More annoyingly, if I try to make a track on a brand new project, I can only make a software track, but the exact same thign happens when I try to create a Real track. Nothing. Plus, when I'm in a previously created project, and I use a track that I made before the problem both of the boxes that are supposed to show if you want a guitar/vocal/bass all of that stuff on the left, and the box on the right have nothing in them. Completely blank. I belive this may be a similar problem to the one I had in my previous post titled "How do I create new real instrument track?" Here's the link:
http://discussions.apple.com/thread.jspa?threadID=542431&tstart=0
In this problem I was using GarageBand 2 and I was playing through an M-Audio FastTrack USB, but the only difference I believe in the two problems was that I could create a new real track, but there were the words "no track selected" in gray (unable to be clicked) in the left box, whereas its impossible to create a track in the first place with the problem i have now. Also, no one could help me on the last problem, and I had to delete GarageBand (but I had to buy iLife '05 again since we lost the install DVD) after I called the support team from Apple, and talked to one of the head guys who was completely baffled. So that's basically all i can describe with my limited knowledge of technology, oh and I deleted the .plist and.cs files and repaired permissions (again) if that helps.

'tis all good right now, just checked on another post dealing with the smae problem, unfortunatley i was forced to downgrade to GB 2.0 but hey, it's only until i can find the iLife '06 DVD.

Schedule Webi (and Crystal) report without creating a new instance

Hi all,
I'm looking for the way to not create a new instance of the report when we schedule a report? Is it any actions on the InfoObject object? Or is it just impossible to do?
Thanks in advance !
Edited by: jerome.vervier on Nov 21, 2011 11:40 AM

Hi,
With regards to your query, whenever a report is scheduled an instance of it will be created.
Therefore, it is not possible to schedule a report without creating an instance.
Regards,
Shreyans

HT1918 why do i have to create a new itunes account because I moved to Canada from the U.S.?

why do i have to create a new itunes account because I moved to Canada from the U.S.?( My current account won't let me change my address to canada so my billing address for account is incorrect, making it impossible for me to buy anything). Will it affect what I am able to put on my device i.e. already downloaded apps, music, etc?

fayry wrote:
... how do I move over my purchases from my current account to my new account?
This is not possible...
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs > http://support.apple.com/kb/HE37

Impossible to create a new JCO

Similar Messages

Maybe you are looking for