Impossible to create a postbox

i can't create a simple postbox in mail, to sort my emails.
in the older version of mail it was no problem to create these folders, but now it's impossible.
intelligent postboxes are possible to create, but this is not what i need.
can anybody help me please?
errormessage:
Der Pfad „~/Library/Mail/Mailboxes/XXX.mbox“ konnte nicht angelegt werden.
The Path „~/Library/Mail/Mailboxes/XXX.mbox“ could'nt be created.
iMac   Mac OS X (10.4.8)  

Mail has a bug that causes ~/Library/Mail/Mailboxes to sometimes be a file instead of a folder, and that prevents Mail from creating any mailboxes there.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, proceed as follows:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/.
3. Locate Mailboxes. If it’s a file instead of a folder, move it to the Trash.
BTW, you can make your life easier in these forums by going to System Preferences > International, and moving English to the top of the list. The next time you launch Mail, it'll be all in English. You can then go back to the preferences panel and move your preferred language to the top again so that everything else is in that language.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

Similar Messages

  • Transaction FMN5N - but impossible to create PO with solved Earmarked Fund

    Hello,
    The display consumption history of Eamarked funds shows an open amount of 58 819, 07 but Transaction FMRP_RFFMEP1OX withthe filter criteria doc. No.1200000197 shows an open amount of 15 965,18 (Amount type 0100 (58 819,07) and Amount type 0200 (42 853, 8 - ))
    Transaction FMN5N to reconstruction of Earmarked Funds in FM. Amounttype 0200 ( + 42 853, 8  ) for doc. No.1200000197 but impossible to create a purchase order (42 853, 89) with doc. No. 1200000197. Open amount from document 1200000197 001 exceeded by 45,71 %
    Somebody already had a similar problem ?
    Thank you
    Fabian

    FMN5N made a 1 occurence in table FMIOI  and the the open amount (transaction FMX3) shows is correct (58 819,07)
    In table FMIO, First occurence : Btart 0100 - TRBTR 58 819, 07- TCODE : FMX1
    Second occurence : Btart 0200 -TRBTR - 42 853, 89 - TCODE :  ME23N
    Third occurence : Btart 0200 42 853, 59 -TOCDE : FMN5N
    In KBLP, WTFREE and HWFREE is 15 965,18
    I want to create un purchase order. The system does not accept an purchase ordre of a value of more than 15 965,18.
    The SAP relase is SAP ERP 6.0 / NW7.01 EHP4

  • Impossible to create an image

    Hi all,
    i can't create disk image;
    i'm using disk utility; the process reaches the 80% about and then it stops.
    The error is: "Impossible to create image: input/output image"
    I think the error is connected to this problem about superdrive, doesn't it?
    http://discussions.apple.com/thread.jspa?threadID=718101&tstart=0
    Thanks.
    Bye!

    I've encountered this error also on my MacBook, so, i think i mistake something.
    Because if i want to create a .dmg image everything works fine, but if i want to create an image to write on a cd/dvd i encounter that error, both on iMac, both on MacBook.
    PS: is it possible to create an image to write on a cd/dvd starting from a cd audio?
    Thanks!
    Marco.

  • Javax.ejb.EJBException: Impossible to create the MyEjbBean

    Hi friends,
    I have created an session ejb and iam calling the ejb from a message drivenbeans ejb create method it look like this
    context = new InitialContext();
    service = (String) context.lookup("java:comp/env/myapp/ApplicationService");
    ref = context.lookup("java:comp/env/myapp/myApplicationBean");
    myEjbHome = (myEjbHome) PortableRemoteObject.narrow(ref, myEjbHome.class);
    myRemoteEjb = myEjbHome.create();
    in my ejb-jar.xml have a reference like this
    <ejb-ref>
    <ejb-ref-name>myapp/myApplicationBean</ejb-ref-name>
    <ejb-ref-type>Session</ejb-ref-type>
    <home>it.ejb.jms.myEjbHome</home>
    <remote>it.ejb.jms.myRemoteEjb</remote>
    <ejb-link>MyBean</ejb-link>          
    </ejb-ref>
    I have a description in weblogic-ejb-jar.xml
    <ejb-reference-description>
    <ejb-ref-name>myapp/myApplicationBean</ejb-ref-name>
    <jndi-name>MyBean</jndi-name>
    </ejb-reference-description>
    But while invoking the ejb i get error like this
    Caused by: javax.ejb.EJBException: Impossible to create the MyBean: EJB Exception:; nested exception is:
         java.lang.NullPointerException
    can any one sugget some solution
    thanks
    Message was edited by:
    rafelmit

    Check whether the look up using the JNDI name is working. Also check whether any exceptions are thrown while depolying the bean

  • Impossible to create LDAP SYNC user on CUCM with Prime Collab Provisioning

    Hello,
    Previously, I use Prime Provisionning to create and provision services for static users, it works.
    For the same Customer, CUCM and Unity user are now imported from LDAP.
    I add the changes in Provisioning processors (LDAP Auth + Sync).
    At this time, it's impossible to create new users on CUCM from Provisioning !
    Here is my procedure :
    - I do a LDAP sync on prime to detect my new AD user.
    - I select it and provision services to push on CUCM
    - Orders stuck in being provisioned state...
    On the CUCM, the user doesn't appear at all.
    Is something wrong in my method ?
    Do I need to make a LDAP sync on the CUCM to import users, next user synchro on processor in Prime, then edit user ?
    Thanks

    Clement,
    I suspect you have LDAP sync turned on in CUCM. If CUCM is set to sync and does not already have the userID in it's database it will reject a user add.
    This is a recognized problem with having both products set to sync. There are some solutions:
    Always sync CUCM before you sync Prime Collaboration Provisioning (PCP).  This way the new user will already be in CUCM and then will accept a provisioning order from PCP.  The frequency of LDAP sync on CUCM will determine how often PCP can push new users to CUCM.
    If PCP tries to provision a user but it is rejected by CUCM, provisioning will attempt to send it for 24 hours. There is an assumption that CUCM will sync daily so at some point CUCM will get the userID and then when PCP tries to provision, it will be accepted.
    Use the latest CUCM 10.5(x) with a patch that provides the Authenticate Only setting setting. You will have to check with TAC or CUCM Marketing/TMEs for more information.  In this case, CUCM will authenticate admins and Jabber clients against AD, but will take users from PCP immediately.  The CUCM eng/marketing team has recommended we move away from syncing CUCM when PCP is doing the syncing from AD. CUCM does not need to sync when PCP is present. This eliminates the race condition between which app synced first.
    Regards

  • Problem FCP6. It is impossible to create multicamera clip with DV and HDV.

    Problem FCP6. It is impossible to create multicamera clip with DV and HDV. I wish to create the multicamera clip from files dv and hdv. But the program informs that it is impossible because the different size frame. Video dv and hdv in the multicamera are incompatible? (Excuse for possible errors in the text)

    Ken Summerall, Jr. wrote:
    Do I need to export this as a movie before I can use it to be allowed to Multiclip with the DV footage?
    How else are you going to use it?
    I thought somehow there was a way to use the sequence itself into the multiclip.
    Like a nested sequence used as a clip.
    Thanks for your help.

  • After Effects (alert) : Impossible to create the file '/Users/JY/Library/Preferences/Adobe/After Effects/13.0/dummy'.

    Hello everybodyI have few problems.
    1. when I try to launch after effects (juste after the installation), I have this message and I don't know how to fix it 
    After Effects (alert) : Impossible to create the file '/Users/JY/Library/Preferences/Adobe/After Effects/13.0/dummy'.
    2 I just dowload AE CC 2014 fort the first time and It say to me The trial version is over....
    thank you

    if your trial is over, it's over.  there's no easy way to re-start a 30 day trial even if it ends before 30 days, Adobe trial software expired early
    if you only had problem 1, you could probably resolve it by right clicking ae and clicking 'run as administrator'.

  • HT201060 Impossible to create AppleID's for my kids

    I want my kids to have their own ID's for their iPad mini's and Macbooks. But it seems this is impossible for us - someone at Apple hasn't really thought this through from end to end.
    1. My 13 and 15 year old cannot create AppleID's either due to their age or because they don't have credit cards.
    2. I have a valid AppleID with a debit card, which I cannot use to create child accounts. Like many expats I have a credit card from back home, but because it is not from the country I live in now, Apple doesn't allow me to add this credit card. Apple is making me regret changing my country of residence! My debit card is good enough to charge me hundreds of dollars, but not good enough to create a child account? Hmphf!
    3. I tried family sharing but that also doesn't work. You need to be signed in to iCloud and you need OSX 10.10 (which hasn't even been released yet!). How in heaven's name do you sign into iCloud with your AppleID which you don't have because your dad is stupidly trying to create an AppleID for you?!
    I gave up on Microsoft years ago because they could not deal with people living abroad, and it looks like Apple is going the same way. Somebody with a brain needs to think this through.
    Please tell me how the heck I can give my kids their own ID's without resorting to illegally declaring their ages and payment method? This is so frustrating.

    Well, I do know that in some countries, the iTunes store will only accept Credit Cards, or any of these other forms of payments:
    What payment methods can I use in the iTunes Store
    How about putting your Debit Card on a PayPal account and using that? (just a thought....)
    Best of luck, and sorry I don't have any other solutions
    Cheers,
    GB

  • Impossible to create script with event expression ?!

    Hi All,
    I have noticed that the use of the event expression in the script properties make its creation impossible with the RWE: an error message popup saying "JCS-00127: extra characters at end" although nothing is wrong:
    - the same script without this parameter can be saved
    - there is no syntax or others kind of errors in the expression in itself
    Here is an example of expression:
    israised("SYSJCS"."TEST_1") OR israised("SYSJCS"."TEST_2") AND israised("SYSJCS"."TEST_3")
    But it can be done with the RS using pl/sql with the waitfor expression, here an example :
    create or replace script "SYSJCS"."TEST_2"
    application         "SYSJCS"."TEST"
    format              "SYSJCS"."ASCII"
    scripttype          "SYSJCS"."KSH"
    no verify
    waitfor             (israised("SYSJCS"."TEST_1") OR israised("SYSJCS"."TEST_2") OR israised("SYSJCS"."TEST_3"))
    event               "SYSJCS"."TEST_1"
    ,                   "SYSJCS"."TEST_2"
    ,                   "SYSJCS"."TEST_3"
    rwscript
    echo Hello world
    endrwscript
    Is this a bug? Have you any idea of how it is possible to make it work though RWE ?
    Thanks for your help.
    Regards,
    Yi Jiang

    Yes. But no more success. Same error:
    ORA-20800: JCS-00127: extra characters at end
    ERROR at line 1:
    ALTER SCRIPT "SYSJCS"."TEST_2" VERSION 4 DESCRIPTION NULL APPLICATION "SYSJCS"."TEST" comment NULL NEEDS NULL QUEUE NULL FORMAT "SYSJCS"."ASCII" SCRIPTTYPE "SYSJCS"."KSH" FOR PARALLEL EXECUTION ENABLED DURING NULL NO OVERDUE COMPILE PRIORITY UNLIMITED MAXPRIO UNLIMITED USE DIRECTORY DEFAULTS FROM SCRIPT NO VERIFY NO LIGHTWEIGHT RESTART OSUSER NULL USING USER ACCOUNT KEEP NOFORCE UNLIMITED UNTIL UNLIMITED FOR NULL STATUS ON SUBMIT SCHEDULED WAITFOR (israised("SYSJCS"."TEST_1") OR israised("SYSJCS"."TEST_2") OR israised("SYSJCS"."TEST_3")) RESUBMIT NULL RETURNCODE MAP '' TO COMPLETED NO PIN TO PARENT ALLOW DESTINATION ALLOW TRIGGERS ALLOW STATISTICS ALLOW WAIT
    ORA-06512: at "SYSJCS.JCS_ODF", line 349
    ORA-06512: at line 2
    Regards,
    Yi Jiang

  • BPF - Impossible to create BPF

    I'd like to create a BPF in BPC 7.5 NW SP3 version but I've got errors (message box) when I choose "Create new BPF Template" in the Action Pane in Administration Interface :
    System.Xml.XmlException: The root is missing.
    at System.Xml.XmlTextReader.Read()
    at Osoft.Consumers.Admin.AdminBPFClient50.ManageDataSet.getUserData(String AppSet)
    at Osoft.Consumers.Admin.AdminBPFClient50.Main.GetBPFData()
    After this message box, BPC opens the BPF Creation Interface but in the Setup Requirements Step C (Set Access), it's impossible to choose a Team or a User : the list below "View by" is empty.
    Thank you for your help.

    Hi Nicolas,
    Please refer to the SAP Note # 1478332 - Modifying Business Process Flow template return XMLException in BPC 7.5
    Symptom
    Modifying any BPF template on one system in Business Planning And Consolidations 7.5 returns error
    "System.Xml.XmlException: The root element is missing.
    at System.Xml.XmlTextReader.Read()
    at System.Xml.XmlReader.MovetoContent()
    at System.Data.DataSet.ReadXml(XmlReader reader, Boolean denyResolving)
    at System.Data.DataSet.ReadXml(XmlReader reader)
    at OSoft.Consumers.Admn.AdminBPFClient50.ManageDataSet.getUserData(String AppSet)
    at Osoft.Consumers.Admin.AdminBPFClient50.Main.GetBPFData()"
    Environment
    BPC 7.50.XX
    BW any version
    Cause
    There is a problem to log with BW user "BPC_USER"
    Resolution
    Double check on your BW server that the "BPC_USER" account is not locked and password is same as one specified at installation time.
    If this does not solve, and ST22 returns "User "BPC_USER" has no RFC authorization for function group "SYST". There has been an issue at installation which should be sent to your BW/SAP Basis expert - this is normally resolved making sure the user is assigned to the SAP_ESH_RFC_ENDUSER role (transaction PFCG).
    Hope this helps.

  • Satellite U400 Impossible to create recovery DVD with Recovery disc creator

    Hi,
    I have a Satellite U400 (few years old), and I never created the recovery DVD.
    Now I want to do it, but for some reasons, when I launch Toshiba recovery disc creator, nothing happens...
    The partition with the recovery files is there, as well as the folder HDDRecovery. I did add some files to this partition, could this be the problem ?
    Thanks for your help.

    It is big problem now if the Toshiba tool cannot find the files.
    How it works you can read on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140985
    Check it out please.
    What you can try now is to check if HDD recovery installation will start - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm but Im afraid the same problem will occurs again.
    To be honest you should install Win7 32bit on this small Satellite notebook. It works perfectly. Forget original Vista OS, Win7 works better.

  • It's impossible to create Enhanced Podcasts on Intel Macs. Please read.

    After vast amounts of frustration trying to create an Enhanced Podcast on my MacBook Pro, I tracked down the source of the problem:
    $ file /Applications/GarageBand.app/Contents/MacOS/ChapterTool
    /Applications/GarageBand.app/Contents/MacOS/ChapterTool: Mach-O executable ppc
    GarageBand uses ChapterTool to add the artwork and chapter stops to the AAC file, and ChapterTool is PPC only. Command-line applications do not run under Rosetta. Simply put, there's no way to author enhanced podcasts if you're using an Intel Mac. None. Every other tool out there to do so needs ChapterTool, too.
    Pathetic. If you, like me, are an Intel Mac user who'd like to create Enhanced Podcasts, provide some feedback to Apple: http://www.apple.com/feedback/garageband.html
    15.4" MacBook Pro, 2ghz, 2gb, 100gb @7200rpm   Mac OS X (10.4.8)  

    Simply put, there's no way to author enhanced podcasts if you're using an Intel Mac.
    Sorry, but I don't buy this. Just created an Enhanced Podcast without any problems. And given that the whole podcast stuff was introduced together with the Intel Macs, we would have heard a lot of complaints here in the forum during the last 10 months. You're the first.

  • Using modem Sagem f@st 3464 (Scarlet One : vdsl   tv   VoIP   wi-fi) : impossible to create a new Wi-Fi network (2.4 or 5 GHz) ? Conflict with DHCP / NAT and so on. No answer from the Apple help desk, Air Port Utility 6.1 unusable (configuration = Win 7)

    Good afternoon,
    My internet connection is delivered by a modem Sagem f@st 3464 (Scarlet One : vdsl   tv   VoIP   wi-fi), it's almost the same than a BBox-2 from Belgacom (software and configuration).
    This modem has 4 ethernet port, 2 for TV, 2 for LAN, the WAN port is RJ-11 and the connection is a PPPoE (in fact, it's the Belgacom network). I also got a Wi-Fi 802.11g on it.
    The main raison why I bought a TC is the dual Wi-Fi 2.4 GHz and 5 GHz (for 802.11n), especially for my MacBook Pro and my iPad 3.
    First of all, can I do the following with my TC :
    1) connecting the TC using a ethernet cable from one of the two modem's LAN ports to the TC's WAN port
    2) create a new Wi-Fi network using the TC ?
    Up to now, after 2 man days of configuration, my TC is connected to my existing LAN network, as a bridge, but there is no new Wi-Fi network.
    The Airport Utility 6.1 "Wizard" is just un-usable and I need to use a Win 7 laptop in order to get access to all the configuration !
    The standard manual is very poor.
    Does someone already create a new Wi-Fi network using its TC connected by Ethernet on a modem/router device ? How do you set up the DHCP (and NAT) ? Which range did you use ?
    Sincerely yours,
    AVDB

    1) connecting the TC using a ethernet cable from one of the two modem's LAN ports to the TC's WAN port
    2) create a new Wi-Fi network using the TC ?
    Does someone already create a new Wi-Fi network using its TC connected by Ethernet on a modem/router device ? How do you set up the DHCP (and NAT) ? Which range did you use ?
    This is easy enough to do..
    Plug the TC directly into a computer.. without other connections to do the setup.
    Using the newly installed 5.6 utility.
    Bridge the TC.
    Create a wireless network.
    This is an older screen shot and I would set security to WPA2 Personal only not WPA/WPA2 Personal as shown above.
    I do recommend you use wireless names that are short, no spaces, pure alphanumeric.
    Update the TC..
    Now plug it into the modem router.. it will be a part of the network without doing NAT and DHCP itself.. which you do not want.. that leads to double NAT issues.. but it is a WAP that provides access to devices on both 2.4ghz and 5ghz bands directly to the main router.

  • FM 8 and FM 9 - impossible to create large sized PDFs

    This is on Windows Vista, FM 9 and FM 8:
    1) Save as PDF does not work when the paper size is 1188 mm x 840 mm (A0 format).
    A blank pdf is created or a pdf with a size of 1 mm x 1 mm.
    Same with A1 format 594 mm x 841 mm.
    A2 format (420 mm x 594 mm) works.
    Has anyone seen this before?
    2) When I create a blank document, type some text and save as pdf, FM tells me to turn off the pdf option to only embed system fonts because of a missing Times font - a font I did not use in this document.
    Are these bugs and if yes, where can I file them?
    I have installed the microsoft hotfix that was mentioned in this forum. Same result.
    Greetings,
    Fridolin Klostermeier

    Thanks for all your suggestions.
    All the following applies to FM9. This is the version my customer will use, since you cannot buy any other version anymore.
    I found out the following: I can produce A0 pdfs in FM9 only when I uncheck the new option "convert cmyk to rgb". A side effect of this is that colors defined as percentage of a process color do not work anymore: 20 % black comes out as solid black in the pdf file, solid black comes out as white. If you redefine the colors as process colors themselves, it works correctly.
    The "print into file" mechanism seems to still change cmyk colors to rgb (with no option available to change the behaviour), and therefore the creation of an A0 pdf does not work when I print into the Adobe PDF printer.
    As to your suggestions:
    - microsoft hotfix did not solve the issue
    - reducing the resolution so that longest paper size * ppi < 32000 is no option because the longest paper size is 1188 mm. This gives a maximum resolution of 26 ppi. Pretty low.
    Does anyone know if I can control the save as pdf settings dialogue with a preference or ini file? I want to turn off "convert cmyk to rgb" as a default setting, and I want to turn off "create bookmarks" and "create tagged pdf"?
    Thanks.
    Yours,
    Fridolin

  • Impossible to create or refresh webi report. (WIJ 77778) - please help

    Hello,
    i'm experiencing problem with BO Edge Standard edition on RHEL4 trying to create or refresh a report on Webi.
    I have installed BO without problem on the RHEL4.
    I can log on Infoview and in CMC with "administrator" however when i try to create a new webi document or refresh a webi document i got an error like
    (Your Webintelligence session has expired. Error : WIJ 77778)
    I'd like to tell you that i got this error with a simple query (one object on the query).
    I have already read the old post concerning the "Time out" however i think it's another kind of problem.
    Has anyone idea how i can deal with this issue ?
    Thanks a lot

    Hei,
    thanks answering me..
    I found the solution.
    Actually the issue came from  Administrator's account rights.
    After the installation, i was thinking that the Administrator was setted up with all rights.
    But i was wrong.
    I used Administrator account and it had not enough rights in Webiserver on the CMC that's why  if i tryed to create or refresh a report, i got the error msg.
    br
    I

Maybe you are looking for