Impossible to deactivate the Resume function

When i'm trying to deactivate the resume function in Lion, it not work, in fact when i'm going to open the General Preferences panel i can see that the check-box on the "resume function" it's still checked.
There's anyone that has the same issue??

Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.

Similar Messages

Does the Resume Function work in an Aggregator Project?

I hope this is a simple yes or no question. If I use the aggregator to publish several SWF's, will i be able to use the resume function that is built into Captivate's TOC settings?

In my experience no it doesn't. The Self-paced Learning bookmarking is more designed for single projects, not aggregated projects.

Activate account on a new computer when its impossible to deactivate the old account

Hello! I have purchased and activated Adobe Photoshop Elements on my old computer, which is now broken. This means that I can not use Photoshop on my new computer because I first have to disable the old version, which I can not do this when my old computer is broken. How do I do to use photoshop again?

Normally the software will allow you to activate on up to two computers. If you've already done so and cannot activate again you'll need to contact customer support. Chat with them by going to http://helpx.adobe.com/contact.html?product=photoshop-elements&topic=activating-my-product -or-serial-number-issues and clicking on 'I Still Need Help'
--David

'Resume' function (buttons over video / white rabbit)

The resume function takes me back to the last chapter marker passed in the track I was viewing previously. Is it supposed to work like that? I thought it would take me bak to the last moment viewed (give or take several frames).
I've got a video track, I use buttons over video to jump to a menu with video background. When the menu times out I run a script that just states 'resume', but it will only go to the last chapter marker passed. Some of my white rabbit videos are several minutes long so that's not very helpful.
From what I understand you can only resume from a menu?
I've had another look at The Matrix and note that after a white rabbit it always returns to exactly the same point in the main movie as though there were a chapter marker there... but no chapter marker exists at those points so what did the authors of the Matrix DVD use to target that return point?
Any clues anyone? Thanks

Thanks Trai - I'll try that approach.
After trying all sorts of combinations to get 'resume' working, all I can imagine is it's not properly implimented in DVDSP or it's not properly supported by players.
A button on a menu with a target or 'resume' should according to the DVDSP manuals return to the point the user was at in a track when the menu was launched (see quote below).
I've tested on 3 hardware players as well as a PC player and Apple's own DVD player. Only a sony DVD recorder resumed to the correct place in the video track. The only other possibility I can imagine is that the buttons over video are in some way causing the problem when resuming? I noticed when the sony did resume to the correct point the subtitle stream being used for the buttons over video was no longer visible (even though a prescript on the track was forcing them to show)
<quote from DVDSP3 and 4 manual>
About Resume
If you jump to a menu while watching a track, for example, by pressing the remote control’s Menu button, the DVD player remembers what track you were playing and how far you were into it. A mostly unknown feature of DVD players is that you can press the Menu button while in a menu to resume playing the track at the same place you jumped from. Creating a button on the menu and setting its Target to Resume provides the viewer with a more obvious way to resume playing the track.
</end quote>

Resume function

New to DVD 4 and struggling to understand the scripts functions and despite reading as much info as poss in manual and on the web I still cannot figure out how to programme a script to get the resume button to bring the viewer back to where the main feature left off playing. Can anyone be bothered to explain in terms of one syllable? (I know it has been gone over ad infinitum, sorry!)Be even better if it was possible to send a screen shot of the commands in the script inspector. Thanks anyway.

Hi - welcome to the discussions!
The resume function is pretty simple as scripts go, but it is important to know why you need to use it in a script, since a lot of resume information is automatically stored and can be actioned in different ways.
For example, playing a track and pressing the menu button takes you to a menu. Pressing it again takes you back to the track - a resume.
Resume info is only stored if a track has played. If you go from a track to a menu, then on to another or subsequent menus, pressing resume (or menu) will take you back to the track again, even if it was in a different part of the DVD.
Similarly, if the track had finished playing, the resume function can give different results, some of which are unpredictable, depending on player functionality. You can resume back to the beginning of the track, to the end jump (and hence a menu) or nothing will happen.
So, knowing these things, the resume function in a script is easy to implement. You create a script, which gives you a single line (with NOP in it) in the script editor. Click on that line and look in the property inspector. The drop down list at the top lets you set different commands, one of which is the word 'Resume'.
If you save this script, with just one line, and point a menu button at it, then the disc will look for the resume information and attempt to complete the resume function.
So - why do you need to script this? Is any of the automated functionality going to be of use?

I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

I need help with deactivation.
I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

if you're using the same computer hardware to reinstall your cs3, you don't need to deactivate first.
but if there's a significant hardware change you can ask adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

How to deactivate the project lock functionality

I am trying configuration from solution manager to development syatem.
After performing the nessary configuration and saving it in a change request it give a message
"Create an RFC connection to the Solution Manager system, or deactivate the project lock functionality"
I have tried everything with RFC connection but problem is still there .
The only option is to deactivate the project lock functionality.
Can anyone help me with it?

I deactivated all the option in tx: /tmwflow/config_lock
but still it gives this message after i save the changes in change request in development system.
I want to deactivate the project lock functionality
ERROR 1
Diagnosis
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
ERROR 2
The settings in Change Request Management do not correspond to the settings in Solution Manager: The projects of the Change and Transport System (CTS projects) for the Solution Manager project XYZ_DEV_MT are different.

Cannot save files or use the undo function in InDesign CC

As of this morning, I am not able to save files or use the Undo function in InDesign CC. Tried many fixes but nothing has worked. I have a ton of work to get done today -- any solutions for this???

Im viewing this thread because its just happened to me again... my solution is below.
Im currently running the latest version of indesign cc (9.2.1) on my brand new 13" macbook pro. (OSX 10.9.4)
As noted earlier in this thread, when this happens, before you give up and close in frustration, EXPORT the file as IDML, and your all good!
Ive had this issue on several occasions using Indesign CC since October. Here are my 2 'Usual Suspects' when this occurs:
1. culprit: SUITCASE FUSION 5 – deactivate 'auto activation' from within Indesign Prefs. In some cases, i didn't even restart Indesign (much less my computer) for this to work.
(menu: INDESIGN/PREFERENCES/ SUITCASE FUSION 5 AUTO ACTIVATION PREFS (bottom of submenu list) Uncheck the top box, 'Auto Activate....')
Im assuming this was rechecked to auto-activate after an update. Hasn't happened in a while—but sure enough, the auto-activate box was checked again.
Its a pain having to manually-activate fonts, but its alot easier than redoing a bunch of work!
2. culprit: CRASH PLAN (online backup)– actually, ive seen this happen with a couple of backup programs. I don't know that this is for sure an issue, but it did resolve the saving issue earlier this year. I just pause backup for a few hours, then resume. Seems to be ok.
Steps i took:
Quit Indesign CC (AFTER EXPORTING the file as IDML!)
Pause backup within CrashPlan.
Restart Indesign CC.

IPod Classic 120gb resume function

I've recently purchased a 120gb iPod classic. It does something no other iPod I've owned does, and it's driving me nuts and I want to shut it off, but don't know how.
If I skip to the next track in a playlist, the next time the song that I skipped comes on (or I select it), it resumes the song from the point at which I skipped it last time! It's starting songs half way through, and is doing this for just about every song in some playlists. I'm getting the tail end of songs, songs starting 10 seconds in...
How do I turn off this resume function, or at least clear it between listens?

Are you sure it only happens on the iPod? iTunes has a option to "remember playback positon" which can be set independently for each track. This option should also control how the iPod behaves. I tend to set it to Yes for anything longer than 10 mins and all my podcasts & audiobooks. If you've managed to get too many tracks with the option in iTunes just set things the way you'd like them and sync/reload your iPod. Otherwise try reseting or restoring the iPod.
tt2

After the most recent firefox update I lost the search function in hotmail

After the most recent upgrade for Firefox the search function in my Hotmail account no longer works. When I try to search through my email for a specific item, I get a message, "It looks like there's a problem with Windows Live Hotmail right now. It should be fixed soon, so please try again in a few minutes. Sorry for the inconvenience."
Also, when I load up my Hotmail account it pretty much seems to take over my browser. If I follow a link from an email to another website, I will often be pulled back to Hotmail...with or without a "hang" and I will get the "Warning: Unresponsive Script" message. It appears to be related to the ad bar that runs on the right side of the Hotmail page. It gets worse if I have more than two tabs open.
I have a similar experience with Facebook. It will often pull me back if I go to another tab. The "Warning: Unresponsive Script" message will come up. often after a considerable "hang" delay. This also can happen if I am participating in a thread. Often, when I am typing it will hang, sometimes for several minutes before my cursor resumes functionality. It can take a very long time to complete even one paragraph.

See http://kb.mozillazine.org/Clipboard_not_working
Try to use the keyboard if the buttons on the web page aren't working.
* Copy: Ctrl+C or Ctrl+Insert
* Paste: Ctrl+V or Shift+Insert
* Cut: Ctrl+X or Shift+Delete

Easy or flexible ways to deactivate the batch management!

Hi Experts,
In our company , we want to deactivate the batch management for some materials.
I know it is not an easy way to do this according to the SAP Note 30656:
to clear stocks of the current and the previous period as well as to complete the open documents.
It is very painful to do the standard procedure as SAP provide.
I want if there is some easy or flexible ways to deactivate the batch management.
For example , to change for new material number.
Or we can set the batch number value to a fixed value, for example "1234" for all these materils.
Are there any other easy or flexible ways to deactivate the batch management?
May be do not need toremove the batch management indicator in the material master?
Just make it simple for all the goods movement that with batch number value input?
Thanks for any reply!

Dont just state a program name without giving the warnings and further explanations from the OSS note:
533276 - Setting the batch management requirement indicator
533383 - Deselecting the batch management requirement indicator
Symptom
The attempt to set the batch management requirement indicator for a material in the material master record maintenance fails because there are stocks or documents that are not completed such as production orders, sales orders, deliveries or WM transfer orders.
Solution
Here, the standard procedure is to clear stocks of the current and the previous period as well as to complete the open documents. Note 30656 provides further information about this.
Alternatively, in the case of a large data or document volume, you can use a conversion report from the batch development that sets the batch management requirement indicator without the necessity of manual preliminary works such as the posting of the stocks or the completion of open documents.
We have developed the main features of this report, but it must be adjusted to individual business processes in a customer project that is subject to charges.
If you require further information about functions of this tool or about running such a customer project, you can send an e-mail to the consulting department

How to deactivate the Most Recently Used List in Adobe Reader?

Hello,
how can I deactivate the "feature" of last used file list.
In our firm it is not alowd to see which document was used last time on a computer/login.
A sheduled erase at the registry is not a functional way to deal with the problem.
s. Peter

You can't COMPLETELY remove it, but you can reduce it to one (1) item. Under Preferences>Documents
1 is the minimum and 10 is the maximum. Hard coded, no way to expand or reduce these limits.
The ONLY other option is to disable the "welcome screen" altogether under Preferences>General

Deactivate the Update of the tables ACCTHD, ACCTIT and ACCTR

Hi
I have read the Note 48009, but in does not describe the form of how to deactivate the update in tables ACCTHD, ACCTIT and ACCTCR form the database, only says that if can be do it.
Thanks

And please ignore my "generic" concept for table updates using the ABAP Dictionary. From Rob's more learned post, this sounds like a function that is documented in a change that you must make programatically.
As Rob suggests, read the note carefully before taking any steps.
Note says:
5. How can a table update be deactivated and activated again?
For this purpose apply the corrections for function module
"AC_DOCUMENT_CREATE" (Program LRWCLU01). Then no new records are written
in the ACCT* tables. You should also implement the source code modifications that are contained in Note 821161 in your system.
If you wish the tables to be updated in the future, undo this correction. Afterwards, the ACCT* tables are updated again as before the deactivation.
Further info is supplied using Number              821161
Version             1 from 21.02.2005
Status              Released for Customer
Set on              25.02.2005

[DeskI XI 3.1] Can't find the "CurrentUser" function anymore

Hi to all,
I'm moving some BO 6.5 reports to our new BO XI 3.1 release...I've got these reports which use the function "CurrentUser" (I'm not sure that's the English name, I've got it in Italian)...however, this function seems to have been disappeared from Desktop Intelligence! I can't find it in the list of functions, and if I write it I get an error that the function doesn't exist.
However, in the DeskI help on functions, the CurrentUser is still listed...
Any idea?
Thanks
Daniele

Hi,
I've found an answear: somehow, it's a translation issue I believe, because I've found the function to be associated to a name like this: =Componente aggiuntivo aziendale() (it means Additional company component).
Still, it's impossible to call the function...so I believe I'll have to wait for a fix from SAP?
Hope to hear something soon from you
Daniele
[A screenshot of the problem on the function editor|http://www.forumtopics.com/busobj/files/thumbs/t_utenteattuale_173.jpg]
Edited by: Daniele Tiles on Aug 10, 2009 2:36 PM

Will adding media frequently harm battery? / Resume function for

I download several podcasts and add them to my player daily, consequently my player is plugged-in and, in-effect, charging for short periods several times a day. I'm wondering if this will cause any problems with the battery. I know the memory-effect is not supposed to be a problem anymore, but I've also read that there are a limited number of charge cycles and I wonder if I'm using them up every time I hook it up to add a podcast, I'm also?wondering how this will effect the accuracy of my battery meter.
I guess a solution to this problem would be to put them on an SD card and play them from the card.
I would love to do this?except for the fact?that there is NO BOOKMARKING, or even a RESUME function available and they are about 2 hrs. long! This leads me to my?second question which is: If they can't integrate the SD card into the main memory, couldn't the at least add a Bookmark or Resume function. It's pretty-much useless as is!

?Don't worry about the number of charge cycles. Lithium ion batteries are dying over time no matter how many times they are charged. I wish Creative would start making mp3 players that use AA batteries, or else make some players that use a common size removable lithium ion battery. Using replaceable batteries would give Creative an advantage over other brands, as there are many users who want a player that uses replaceable batteries. Cell phones and digital cameras use replaceable batteries. Why don't mp3 players use them?

Impossible to deactivate the Resume function

Similar Messages

Maybe you are looking for