Impossible to find the key to enter the bios on the pc B50-70

hello I do not find the key to enter the bios on the pc I have B50-70 essyé F1, F2 and Del but it does not work

Good day and welcome to the community.
Have a look at page 10 of: https://download.lenovo.com/pccbbs/mobiles_pdf/b40_b50_ug_en.pdf
Do you see item #3 (Novo button) on the right-hand side of your laptop? If you push it briefly while the laptop is fully powered off, it should boot to a small menu that has entering BIOS as one of the choices.
Please let us know if this helps.
Regards.

Similar Messages

Download ios 7, and the location function is off, I can not access because I forgot the key constraints, I can not restore the iphone because I can not find iphone app access

download ios 7, and the location function is off, I can not access because I forgot the key constraints, I can not restore the iphone because I can not find iphone app access

If you have a passcode to the screen lock that you've forgotten, restore the device from the computer to which the device is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034
If your device is running iOS 7 and you set up Find My iPhone (iPad/iPod), however, then it has the Activation Lock on it and you'll need to enter in your Apple ID and password to activate the device after restoring:
http://support.apple.com/kb/HT5818
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Lync 2013 the keys you entered i don't recognize queue main line extensions

I have Lync 2013 on premise with Exchange 2013 on premise as well.
For some reason, when someone dials our main line and I answer, the system goes call was not recognized.
Also, All of a sudden when someone dials in from internally/externally into my main line and dials an extension after the auto attendant kicks in, the system prompts " The keys you entered I dont recognize"
If I dial by last name, it does work and it works if I dial # and then enter the extension.
Please help..

Hi,
Did the issue only happen for one number of for all phone numbers?
From the description above, it can be the issue of the mistake of the dial plan for the number. Please double check if the Exchange set the correct normalization rule for the number and then test the issue again.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Display/Print the Selection criteria entered by USER on the ALV Report o/p?

Hi Experts,
I hv a requirement of to print/display the Selection criteria entered by user in the selection screen.........on the top portion of the ALV report output lay out.
There is a FM for this purpose, but, I forgot its name!!
So, let me know the FM or FMs, so that, will choose, which is best one,
or the piece of code, which covers all select-option entries..........appreciated.
thanq
Edited by: SAP ABAPer on Sep 3, 2008 6:35 PM

Use the Function RS_REFRESH_FROM_SELECTOPTIONS get the selection details, now format the data accordingly in the TOP_OF_PAGE using the calss CL_DD_DOCUMENT.
Check the below mention code.
REPORT ztest_page.
TABLES: sflight.
DATA : it_flight TYPE TABLE OF sflight WITH HEADER LINE.
DATA BEGIN OF it_sel_opt OCCURS 0.
        INCLUDE STRUCTURE rsparams.
DATA END   OF it_sel_opt.
SELECT-OPTIONS: s_carrid FOR sflight-carrid.
START-OF-SELECTION.
SELECT * FROM sflight INTO TABLE it_flight
   WHERE carrid IN s_carrid.
END-OF-SELECTION.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
    EXPORTING
      curr_report     = sy-repid
    TABLES
      selection_table = it_sel_opt
    EXCEPTIONS
      not_found       = 01
      no_report       = 02.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program          = sy-repid
      i_callback_html_top_of_page = 'TOP_OF_PAGE'
      i_structure_name            = 'SFLIGHT'
    TABLES
      t_outtab                    = it_flight
    EXCEPTIONS
      program_error               = 1
      OTHERS                      = 2.
*&      Form top_of_page
*       text
*      -->DOCUMENT   text
FORM top_of_page USING document TYPE REF TO cl_dd_document.
DATA : dl_text(255) TYPE c. "Text
* Add new-line
CALL METHOD document->new_line.
CALL METHOD document->new_line.
CLEAR : dl_text.
* program ID
dl_text = 'Program Name :'.
CALL METHOD document->add_gap.
CALL METHOD document->add_text
    EXPORTING
      text         = dl_text
      sap_emphasis = cl_dd_area=>heading
      sap_color    = cl_dd_area=>list_heading_int.
CLEAR dl_text.
dl_text = sy-repid.
CALL METHOD document->add_text
    EXPORTING
      text         = dl_text
      sap_emphasis = cl_dd_area=>heading
      sap_color    = cl_dd_area=>list_negative_inv.
* Add new-line
CALL METHOD document->new_line.
CLEAR : dl_text.
dl_text = 'Selection Criteria'.
CALL METHOD document->add_gap
    EXPORTING
      width = 34.
CALL METHOD document->add_text
    EXPORTING
      text         = dl_text
      sap_emphasis = cl_dd_area=>heading
      sap_color    = cl_dd_area=>list_negative_inv.
* Add new-line
CALL METHOD document->new_line.
CLEAR : dl_text.
CONCATENATE 'SELECT Option' 'SIGN' 'OPTION' 'LOW' 'HIGH'
INTO dl_text SEPARATED BY cl_abap_char_utilities=>horizontal_tab.
CALL METHOD document->add_gap
    EXPORTING
      width = 34.
CALL METHOD document->add_text
    EXPORTING
      text         = dl_text
      sap_emphasis = cl_dd_area=>heading
      sap_color    = cl_dd_area=>list_negative_inv.
* Add new-line
CALL METHOD document->new_line.
LOOP AT it_sel_opt.
    CLEAR : dl_text.
    CONCATENATE it_sel_opt-selname it_sel_opt-sign
     it_sel_opt-option it_sel_opt-low it_sel_opt-high
    INTO dl_text SEPARATED BY cl_abap_char_utilities=>horizontal_tab.
    CALL METHOD document->add_gap
      EXPORTING
        width = 34.
    CALL METHOD document->add_text
      EXPORTING
        text         = dl_text
        sap_emphasis = cl_dd_area=>heading
        sap_color    = cl_dd_area=>list_negative_inv.
* Add new-line
    CALL METHOD document->new_line.
ENDLOOP.
ENDFORM.                    "top_of_page

"The key 'LocalizedPerfCounter' does not exist in the appSettings" when creating Socket

Hi all,
Some time ago, I've installed the nuGet package for self-hosted signalR applications on a project. Today, I went to start a completely unrelated project, one that does not have that package (or any package at all), and has absolutely nothing to do with owin,
asp.net, signalR or anything else related to that package.
Now in this project, when I try to create a Socket, I get an InvalidOperationException: "The key 'LocalizedPerfCounter' does not exist in the appSettings".
The exception seems to be handled and the program proceeds, but it's annoying.
Also, I'm seriously concerned. Here I'm not trying to create some arcane ASP.NET thing that calls down into a dozen layers and six different configuration frameworks before actually getting to the TCP stack. I'm doing a plain straight new Socket(AddressFamily.InterNetwork,
SocketType.Stream, ProtocolType.Tcp).
How is it possible for a nuGet package that installs unrelated DLLs to another solution entirely to affect something that resides in the basic System.dll? What business does it have interfering with very low-level network calls?

Hello Zappo,
For this InvalidOperationException, please check this hotfix to see if you are under those scenario:
http://support.microsoft.com/kb/2784156
>> How is it possible for a nuGet package that installs unrelated DLLs to another solution entirely to…
For this, since it is related with the NuGet, I suggest that you could post it to the NuGet forum,
https://nuget.codeplex.com/workitem/list/basic
The current forum is specifical for .NET Framework Class Libraries.
Discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection. Discuss and ask questions
about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection.
Thanks&Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My apple wireless keyboard got wet a year ago i sprayed the cleaning spray on it some of the keys are working but some of the keys aren"t working. it got sprayed a year ago What should i do??? Can it be recovered plz tell?

I sprayed it a year ago i really like the keyboard and i really need it can it be recovered??? My apple wireless keyboard got wet a year ago i sprayed the cleaning spray on it some of the keys are working but some of the keys aren"t working. it got sprayed a year ago What should i do??? Can it be recovered plz tell?

There is almost no chance it can be recovered, except at a cost far greater than a new keyboard. Once wet, spraying with a cleaner will not do any good and most likely will make the situation worse.
Best thing at this point is go to your Apple store, or the on-line store, and buy a new keyboard. Water damage is not covered by the warranty or AppleCare.

My Wireless mac keypad has stopped properly working. The keys sometime do not correspond to the result, or a a simultaneous duel actio, for example when the delete button is pressed the. Ursor does go backwards, but it also turns the sound up. Any ideas?

My Wireless mac keypad has stopped properly working. The keys sometime do not correspond to the result, or a a simultaneous duel actio, for example when the delete button is pressed the. Ursor does go backwards, but it also turns the sound up. The keyboard is properly connected to the computer, and the battery life is up in the nineties.
Help please !!!!

Hi, thankyou for your response. Can I just confirm that you mean turning the computer on and off again, or re-booting the whole system. If it is the first I have already turned the system on and off, with no luck.
Regards

How to force the user to enter a value in the prompt

Is there a way to force the user to enter a value in the prompt before they run the report?
We have a customer specific dashbaord. The user has to enter a customer number in Dashbaord prompt on a first page of the dashboard. We store that value in a presentation variable. That presenatation variable value is being referenced in all the other pages of the dashabord. If the user does not enter a values in the first page and directly navigates to the other pages on the dashbaord, the reports on the other pages start to run for all the customers. Is there a way to force the customer to enter a value in the prompt before running any of the reports on the dashboard?
Thanks!

by Answer prompts, do you mean Column prompt?
I can not use Column prompt in this senario as the user should not have to enter the same customer number over and over again when he navigates from one page to another on the same dashboards. If there is a way to default the column prompts then this would be an acceptable solution.
I have already defaulted the prompt to a value as suggested in hte blog, but the issues occurs when the user erases the defaulted value. Is there are way to set the default value within the report?
Can you please explaing mroe about option 3 regarding Java Script. Also please let me know what other options there are so that I can check whether they will fit my needs.
Thank you very much!

I turned on My MacBook Pro, And there is no picture on the screen, Even though the keys have lite up as if the laptop is running perfectly, All except my blank screen ??

Any one help .... av tried the pram thing ??
took the battery out etc etc ??? am at a loss..

I agree Thedave413..... Just this aint never happened to me before you no .... Press the power button.. , the macbook pro makes the normal sound.... But the screen doesnt go blue, Or it doesnt do anything even though the keys soon light up as if the macbooks running perfectly, Al except my screen.. which is completely blank ???
Can anyone help at all with some good advice ???
As a trip to the genius bar is a 2 bus journey away from were I live....Good lord ....Oooooffftttssss...

How can I drop the key board from my calendar. The normal lower right key stopped working

How can I drop the key board from my calendar? The normal lower right key stopped working.

You can install this extension to make it easier to edit userChrome.css:
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
The file needs to have this code:
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#personal-bookmarks #bookmarks-menu-button { display:none !important; }</nowiki></pre>
You can reach the profile folder this way:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
The file userChrome.css needs to be in the chrome folder in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so if the chrome folder is missing then you need to create a folder with the name chrome.

Setting up a new email account on mail, the password is entered for connecting to the in

Assuming that in this day and age you want security.
Setting up a new email account on mail, the password is entered for connecting to the in & outgoing servers before SSL is set. Before you can set SSL, mail connects to the servers so email password is transmitted unencrypted?
This seems a very obvious quirk/bug and something that I have always felt uncomfortable about.
Anyone else think this is not a good thing?

Actually it look like all apple devices have the same mail setup procedure, so are your email passwords all being sent over the network in plain text before you get the chance to set the SSL option?
Any security experts care to comment.

I cannot re-install Adobe Acrobat X Standard I have the Key and it is accepted - but the installation almost finishes and the stops and back out

I cannot re-install Adobe Acrobat X Standard I have the Key and it is accepted - but the installation almost finishes and the stops and back out
I have tried this several times
Please advise

uninstall any acrobat and reader installations, clean and then install - Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

I have lag between the keys on my Yamaha PSRE423 and the sound emergig from my Macbookpro running the teaching programmes on Garageband. This makes it impossible to get the beat right so I cannot score in my very first lessons!How do I achieve sync?

My Christmas present for my retirement is a lovely keyboard that I now have to learn to play! I thought that the Apple teaching programmes in Garage Band would be an ideal start.
I downloaded the driver software for OSX from Yamaha and then connected the keyboard via USB. Havind downloaded the teaching programmes I started in on Lesson 1. BUT when I press a key it is at least a beat behind by the time it emerges from the computer speakers and is also late in displaying against the teaching score!
So how do I get it all in sync??
Proftin

SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck.

I can not find my printer by entering its address in the search bar

i am unable to access my printer when i type in the IP address. i recieve an error message saying "The remote devise or resource wont accept the connection" but i am able to print over the network. Its important to me because i have to monitor the printers so i can change the toner. how do i correct this so that i can see my printers status?

Hello @theNewGuyAtWork ,
Welcome to the HP forums.
I understand that you are having problems reaching the printers EWS (embedded Web Server)
I would like to help.
Often when the EWS is unreachable there is a minor network issue at hand.
I would turn off the printer and any network devices.
Then unplug the power cord to the router for at least a minute.
Plug the power cord back into the router.
Turn on all the network devices.
Wait a couple of minutes for the network to be rebuilt.
Try to reach the EWS.
In case the printer is in an environment that you can't cycle the network, have the IT guy check the following settings in the router.
~ Multi-casting needs to be on or enabled (Allows Bonjour Connectivity)
~ Wireless Ports, these can also be blocked in security software:
Incoming (UDP) ports : 137, 138, 161, 427
Outgoing (TCP) ports : 137, 139, 427, 9100, 9220, 9500
~ Our printers only support 2.4 GHz not 5GHz
~ Recommended that the network name and password DO NOT contain and spaces/punctuation or special characters ~ Dual broadcasting enabled (for wireless b/g and n networks)
~ Mac filtering Disabled
~ The built in Firewall should be at the default or lower settings
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

I have an account that the email address live, but they stole my account and changed direccionn email to Gmail but now that I have new email in gmail not in me finds the account or reconose me the key and create another account, but the Musia that havi bo

had a live email account, but the account was stolen and opened an email account in gmail and made the change by hour account but I do not recognize this and create another account with the same email, but in the other account had purchased music, as I can do to recover purchased music.
The previous Cunta I have it open on a pc but the pc is not mine

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Impossible to find the key to enter the bios on the pc B50-70

Similar Messages

Maybe you are looking for