Impossible to keep the changes in "Edit Quality Preset"

Hi,
My Movie is a typical HD movie from a Panasonic Camera --> 1920x1080i (H264)
However in my Encore Blu-Ray project, default settings are strangely set to Mpeg2 Blu-Ray at 1280x720
The Video lasts 30 minutes and I also have a slideshow.
-->the Blu-Ray generated with this has a very low quality (only 7GB when it could size 25GB...)...even if when played it seems to be in 1920x1080 and at a variable rate around 20 Mbits/s
I tried to "Edit Quality Preset" : Blu-Ray H264, 1920x1080... and I save the preset. Then I click on the "OK" button and...nothing has changed.
If I go again on "Edit Quality Preset", it is back to the same absurds settings.
1)Why the settings are not really saved
2)How can I improve quality to size 25GB
Thank you.

1) After you edit the quality presets (Modify, name, save), you must apply that modified preset to your asset. It is a two step process. You describe only one "ok," so I think you have not applied the preset to the asset.
You select the preset (including your modified one) in the "Transcode Settings" panel, not the "Edit Quality Presets" Panel.
That should help you get the quality you are looking for.
Note that slideshow quality is determined by the default transcode for the project when set to bluray.

Similar Messages

I rebuilt the thumbnail cache and lost all the changes and editing I had made to 4000 photos every photo reverted back to the original

A tech rebuilt my iphoto thumbnail cache and afterwards all the changes and editing of all my 4000 photos was gone!
Every phot had reverted back to the original!!!!! WHAT HAPPENED???? Why were all my changes destroyed? Where are the photos that I edited?
Also a bunch of photos disappeared. HELP!!!!!

Of course there is no reason that rebuilding a thumbnail cache would cause a loss of all editing of my photos!!! But that's what happened.
I was there when the tech rebuilt the library and thumbnails. He held down shift & command and opened Iphoto and a window appeared with "Rebuild Photo Library" with 6 boxes to check such as
1) Repair Iphoto Library Database
2) Rebuild Iphoto Library Database from automatic backup
3) Rebuild the photos' small thumbnails
4) Rebuild all the photos'thumbnails (this may take a while)
5) Recover orphaned photos in the Iphoto Library Folder
6) Examine and repair IPhotoLibrary file permissions
The tech checked all boxes and after Iphoto has rebuilt everything all my editing was gone and all my photos had reverted back to their originals representing 5 years work.
There are no stuck keys on my keyboard of my computer.

Is changing Edit Quality Presets nescessary?

Hi,
It was such a long time that I used Encore, and that was some versions ago. Hopefully you can help me answer this simple (?) question:
What are the quality presets for?
The thing is, I forgot to choose a preset before I burnt out two copies, thus the default setting was set to blueray instead of dvd (CBR, high quality) that I wanted. The dvd plays fine on both computers and on the dvd-player for the TV, and of course it is impossible for it to be anything else but a dvd. So, do I even need to change the quality presets for it to work?
I use Encore CS4 and the movie is PAL Widescreen. I imported an avi and let Encore do the encoding. I also set it to "one copy allowed" option, later I heard this can also cause compatibilty problems.
Should I burn out two new copies or can I send the ones I have got to the customer?
Many thanks!
/Helena

This is really just to let you know that someone is reading... 'cause I can't answer
I do hobbyist home video work, and I always just export an AVI from PPro3 and let Encore do all the transcoding work with the authoring
As far as I know, the quality presets "mostly" have to do with how the encoder (I use the default 2 pass) handles scenes with lots of motion... which are the hardest to do well so they view without "motion artifacts"
Hopefully, someone with more knowledge will come along with a better answer
If your current DVD plays well, on more than one brand/model player, I wouldn't do it over

6500 slide: how to keep the change of "My Shortcut...

I followed the user guide step by step to personalize "Setting->My shortcuts->...."
However, if I switch the phone off and on again, the personal shortcuts I set will be changed back automatically as the original default setting. For example, the "left selection key" will always be "go to" function and the "right selection key" will become "O2" which is the network I'm using now.
How can I keep those changes I have made?

it is unnormal problem.
check your phone for firmware upgrading here:
http://europe.nokia.com/A4577224
by upgrading your phone,i hope to solve your problem.
but if you have the latest firmware,reset your phone by pressing*#7370# in standby mode,after backing up your phone.
NOKIA means:Night Of King In Alone

BIOS could not keep the changes

Hai ,
My Desktop HP pro 3400 MT was run with Microsoft XP , now it is not able to boot and showing BIOS is loaded with default settings.When i make cahanges on SATA Emulation to IDE and save and exit again occuring same as above.
So i downloaded BIOS update from HP site and installed (BIOS version 7.16). Battery also changed ,still problem persist.
When i install windows 7 its ok but System Date and time making issue.....
How can i keep these changes on BIOS .....

Noushadkk wrote:
Hai Erico
Thanks for ur quick responds,
I replaced once more the flat 2032 battery with a fresh one but does not enable the RTC to keep time of BIOS to save changes .
Thtis may be a silly question, but is the + on the battery facing upwards? It should be.
If you somehow inadvertently managed to put it in upside down, it won't work.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How do I import multiple Ai files into one Indesign File - whilst still keeping the Ai Files editable and up dateable for the one Indesign File?

Hi All,
Im relatively new to Ai and Indesign, and have been doing Uni work over Christmas, and have a rather urgent question thats stressing me out.
I originally had many art boards in my ai file, but due to the number, I split these into single files to help my computer run better.
Now I want to organise them into one document to save. From searching online Indesign can import these and save as one file, yet automatically update if the original ai file is updated. I would like to do this but just don't know how to do this correctly?
Any help would be greatly appreciated.
Im using CC Ai and indesign.
Thanks in advance
Sam

Yes, effectively I would like to catalogue the files into one collection so i can save as one PDF and Print as one.:)
I know I could save each AI as a pdf them then merge the pdf's together in acrobat, but I have nearly 100 files so would feel more comfortable seeing them all together before print / saving.
My concern is that if I insert them in Ai, will the file resolution reduce? and will the ai still be editable and would it update the indesign file?
Thanks for the quick reply

IBooks 2 - Why doesn't the book keep the changed font

iBooks 2 - changing the default font and size of the book is not stored for the next session of the book. The book returns to display the last viewed page but resets to the default font and size.

Works as expected for me. Try killing the iBooks app and trying again, or resetting the device. If all else fails backup & then restore.
tt2

I keep getting a warnin that my pages document could not be auto saved. The file has been changed by another application. Click save anyway to keep your changes and save the changes made by the other application as a version, or click revert to keep the c

I keep getting a warning stating that the document could not be auto saved in pages. The file has been changed by another application. Then it says click save any way to keep your changes and save the changes made by the other application as a version, or click revert to keep the changes from the other application and save your changes to a version.
What in the heck does all that mean, and why are they trying to behave like a Windows product or a Microsoft office product. I just don't get it.
Why is another application changing my documents? It's like they've created a virus within their own programs. It's a pain in the neck and makes no sense.

I am also having the issue of a warning saying "could not be auto-saved in Pages. The file has been changed in another application. I then hit "save anyway", the warning will go away for a time, sometimes minutes, sometimes hourr, but then the warming reapprears saying the same thing. This is not the case with all Pages documents but it is the case with many.
Working with a Retina Macbook Pro and current software
These are newly created documents

How to keep the quality of an photo I import onto my ipad2?

I'm going travelling for a couple of weeks next month, I have a Canon EOS 450D camera that I wish to take with me, and my 32gb Ipad 2.
I have a camera connection kit also, and plan to copy my images from the camera to the ipad for safe storage on a regular basis. (mainly incase the camera gets stolen!!)
I've copied pictures over before and noticed that the quality reduces significantly. Does anyone know how to maintain the same quality/size picture?
Also im guessing the 32gb should be fine to hold quite a number of pictures??
Would anyone recomend doing anything else???
Thanks for your help!

The camera connection kit doesn't reduce quality, it keeps the photo's size, quality and Exif info intact - photos that you sync from a computer via iTunes are 'optimised' by the syncing process, but the kit doesn't alter them. You can then copy them to your computer : http://support.apple.com/kb/HT4083
After you've copied the photos to the iPad I would still keep them on the cards as a separate backup.

CANNOT CHANGE QUALITY PRESETS

Captured video is 1920x1080p, AVCHD format, using Adobe Premiere pro CS5 and Encore CS5, win 7 computer. Used Adobe dynamic link to get edited source into Encore. It uses quality presets 720x480, 29.97fps. I edit and build in Encore which results in a 4x3 DVD. Encore will not let me change the presets to a widescreen setting. When I select edit quality presets, MPEG2-DVD. & widescreen, OK... Encore just hangs. This is my first experience with Encore in a new turnkey computer. Could it possibly be a faulty software installation?
Thanks..... Gordon

You might want to check the interprete footage.
Best is not use DL as it reverses the fields for DVD. Export directly from Premiere then import these files into Encore. Make menu and burn to disk.

Lightroom 5 make adjustments want to transfer to photo shop to make additional adjustments. how do you keep the adjustments made in lr5 when photo is transferred to photo shop

lightroom 5 make adjustments want to transfer to photo shop to make additional adjustments. how do you keep the adjustments made in lightroom 5 when photo is transferred to photo shop
I am not able to keep the changes made in light room when I transfer to photo shop

Something you need to understand. Unless you are using the latest version of Photoshop Elements, it's possible that some of the adjustments that you make in Lightroom won't transfer to Elements if you choose the option to open anyway. If you choose the option to edit a copy with Lightroom adjustments then Lightroom will create a TIF or PSD file (depending on your preferences), and that file will include all of the adjustments that you have made using Lightroom. Then you can finish your work in Photoshop Elements.
The process of transferring an image from Lightroom to Photoshop or Photoshop Elements involves the Camera Raw plug-in. It has to be used to interpret the Lightroom adjustments and apply those adjustments to the image after it has been converted. Files open in Elements or Photoshop or no longer raw images because those programs are incapable of editing raw image data. I don't know if this will help you in this situation. Feel free to ask if you have more questions.

How to find out the changes

How do i find out as to who has made/created a new field in a table.
i am trying to find the same as somehow the transport for the same has been missed and we need the info to send the changes to our quality box.
Regards,
Gauravjit.

hI
check the versions here u can find the users who have activated lastly....
reward points to all helpful answers
kiran.M

How to reverse the changes made in a report program

Hi Friends,
I want to change a report program,but this report program is locked under one tp which is not yet released and it is in development only .I want to change the same report program but don't want to keep the changes done in the existing tp.I want to keep only changes which i will do.
Please help me to achieve this task.
Thanks in advance.
Regards,
Rajesh

hi
if u have done Version Management then u can retrieve the previous version of ur report
Version Management is done in utilities -> versions ->Version Management
otherwise its not possible.
regards
ravish
plz dont forget to reward points if helpful

What happens to the changes made to the standard OTR texts in E-recruitment

Hi all,
I have to change the OTR texts of e-recruitment. But I doubt whether they remain changed or overwritten in upgrade if I directly change the OTR text itself.
Any one please help me in this issue.
If I want to keep the changes in upgrade how should I proceed.
Thanks in advance.
Ravi

Hi,
Yoy will get propbaly SPAU. Check http://help.sap.com/saphelp_nw70/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/frameset.htm for details.
Therefore it's advisable to make a copy of standard SAP stuff.
Eddy
PS. Reward useful answers and earn points yourself

Does ODI keeps the record of last run date of interface?

Target:Oracle
Source:MS SQL
ODI:11g
My requirement is I have a source table, Whatever operations performed on that (like insert,update etc) table, I want to load those records into the target table. For that I have created an Interface which runs daily at 6 PM.While loading, I have put one filter which loads only those data which got inserted/updated on current date(GETDATE()).Suppose the case, If my ODI has been down(because of any reason) since 3 days. In this case I have no option to load the records who got changed in that three days. On the fourth day I start the ODI then, how can I get data which got changed in last three days.
Is there any place where ODI keeps the record of last run date or something of interface ?
If I use CDC in that case, once the ODI down then the journalism can not able to keep the changed data info.
How can I load the changed data into the target.?
Thanks,
Shrinivas

If you have a date column in source and target , I guess you might be having a you are using date , you can use a filter and write the expression like this
Source_date > (select max(date_created/update) from schema.target_table)
I have validated this expression and it validated by ODI , I did not try running it , please give it a shot
Suresh

Impossible to keep the changes in "Edit Quality Preset"

Similar Messages

Maybe you are looking for