Impossible to load YouTube files

For a few days now, I cannot load YouTube files on my iPad and iPad 2.
The same files are accessible to my iMac 2011 and to my daughter's PC without problem.
My setup is cable > cable modem > Time Capsule > Ethernet network to computers and WiFi network to iPads and printers.
Everything works fine except for those YouTube pages that refuse to load and give the message : This video cannot be read.
I have reset the TimeCapsule (disconnecting the power for a few minutes) and disconnect the power to the cable modem also.
Also, both iPads can access these YouTube files when they are connected to another WiFi network.
I have tried to look at setup in Airport Utility but I found nothing that is unusual. I am suspecting the Time Capsule router to have lost something in the setup ports. But I am not absolutely certain.
Can anybody bring some light to my problem?
Thanks
Jean-Luc Brousseau

Same problem - This is the message:
/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII failed
I have done everything suggested from every forum, from updates from Epson, etc.
PLEASE someone, HELP! Would I have the same problem if I were to add another printer that's not EPSON?
Trying to operate a home business and I'm a teacher, so printing is a must for me to do anything.
THANK YOU for any suggestions and help!

Similar Messages

Upgraded to Yosemite, Now Safari Won't Load Youtube and Other Sites

I upgraded to Yosemite the day of. Almost immediately I found that Safari no longer would load Youtube. At all. It would just sit and spin and work and eventually say that the page wasn't available. This was also a problem with other websites. For instance, IGN would load, but it was very, very slow. Redirected webpages from Youtube that used URL shorteners would do the same thing as Youtube, it would just sit and crank away and finally give up.
When I try the same thing with Google Chrome, it loads those pages just fine. Youtube and these sites also work on my Macbook and my iPad, so I believe the problem is specific to my iMac.
So... I got really angry a few days ago and did a complete reformat of my computer. I didn't restore my old image from Time Machine, but I did a brand new install and just backed up some precious files. I re-installed Yosemite on my freshly cleaned hard drive and low and behold, Youtube worked, as did all the others!
But after about four days, the same problem is happening again. Youtube won't load, redirects from Facebook using URL shortening is a disaster again. I'm losing my mind. What could be causing this problem!?? Reformatting was the only idea I had, and I thought it was a very thorough solution. Is Safari doing this for anybody else?
My system:
iMac (27-inch, Mid 2011)
Processor 2.7 GHz Intel Core i5
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6770M 512 MB
Running Yosemite Version 10.10

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Load youtube video in a movieclip

hello all,
i m trying to load youtube videos in my flash8 application.i
m using this code:--
System.security.allowDomain("
http://www.youtube.com")
System.security.loadPolicyFile("
http://www.youtube.com/crossdomain.xml")
this.createEmptyMovieClip("image_mc",
this.getNextHighestDepth())
var mclListener:Object = new Object();
mclListener.onLoadInit = function(target_mc:MovieClip) {
target_mc._x = 0;
target_mc._y = 0;
var image_mcl:MovieClipLoader = new MovieClipLoader();
image_mcl.addListener(mclListener);
image_mcl.loadClip("
http://www.youtube.com/v/818hQQmxHaM&rel=1",
image_mc)
This code is working fine but as i try to load other youtube
video on same movieclip on a button click event it loads nothing.
//code written on click event of button:--
on(click)
_root.image_mcl.loadClip("
http://www.youtube.com/v/5-43Xu6wrK0&rel=1",
_root.image_mc)
please help me on this issue.
thanks in advance

thanks for your reply.I have updated my code as u told me but
my problem is still same as before.
First time youtube video loaded properly but if i try to load
another video on same movieclip,it display flv player with its
control bar, but no flv file loaded on it.
please help me again
thanks in advance

Loaded SWF file CANNOT be made into button DIRECTLY?

I'm experiencing a problem which may have no solution, but I
would like to know why I cannot do what I want to do.
PROBLEM:
I am attempting to load in an external SWF file and once it
is loaded, I wish to directly make the new Sprite/MovieClip into a
button. However, the newly loaded Sprite/MovieClip seems to be
resistant to be made into a button DIRECTLY. I would like to know
why this is.
WORKAROUNDS:
Here are a couple of workarounds, but again I wish to know
why I cannot do what I want to do.
1) I place the new Sprite/MovieClip into an empty Sprite on
stage and make the once empty sprite into a button.
2) Construct the external SWF in such a way so i can refer to
a MovieClip within the SWF file and make that MovieClip into a
button.
CODE EXAMPLE:
I am loading a SWF file thru a Loader and then taking the
loaded SWF file and adding it to an existing sprite on the stage. I
then attempt to make a button out of the newly loaded swf file, but
it fails to be clickable.
The following is some quick code to illustrate my problem. I
already have workarounds in place, so please let me know WHY the
following code is impossible. thanks!
==============================================================================

There should be no problem with what you are trying to do. If
you want someone to look at what you've done, you have to be
careful to show that and not possibly errant code because that is
the substance of your post and what you requested be looked at--we
cannot guess what you may have done wrong in setting things up or
for code that you do not show.
I tried your code before posting my response and it worked
fine except for your error with the COMPLETE aspect. I did not
utilize any objects for loading things into, so I suggest you look
there.

Loading text file to Essbase - Group By

Hi All,
May be someone have an idea...
I have text file (csv) with detailed data that I want load to Essbase. The data in file is in day level while the minimal period in Essbase is month.
Using SUM() function I'm trying to aggregate the values but get the error:
From Execution tab:
com.hyperion.odi.essbase.ODIEssbaseException: Invalid column type specified for Data column [Data]
     at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
From Description tab:
sql= """select 'Work Hours' "Account",'Jan' "Period",'PTD' "View",'Translated to USD' "Currency Status",CONCAT('div_', C3_DIV) "Division",'Actual' "Scenario",C2_PROJECT_NUMBER_ "Project",'STAT' "Currency List",'com_100' "Company",'Final' "Version",'FY09' "Year",SUM(C1_HOURS) "Data" from "C$_0Security_ProjectsData" where      (1=1) And (C3_DIV in ('45', '48', '49')) Group By CONCAT('div_', C3_DIV),
C2_PROJECT_NUMBER_ """
When I remove SUM() function it loads the file succesufully,
Is it because groupping is impossible on text datastore or something wrong in my interface?
Thank you,
Alexey

Thank you John very much for the solution. It solved my problem.
Because I got it by mail I put it here to ba availible for everyone it may be interesting:
" I take it you are using "SUNOPSIS_MEMORY_ENGINE" as the staging area, if so
this seems to be the cause, it might be a bug.
Is it possible you could change your staging area to use a logical schema
using a relational database (e.g. sql server or Oracle)
I am able to replicate the issue if I using the memory engine as the staging
area but I can load the data using a relational staging area.
I would recommend switching from the memory engine anyway. "
Thanks a lot.

Phone won't load youtube videos

My bb curve 9360 won't let me load youtube vidoes, it says error has occurred attempting to play media....can anyone help?

Hi gb123
Try this Knowledge Base article :
KB20491 : Unable to view YouTube video files on an Unlocked BlackBerry smartphone
KB31953 : When attempting to stream video in the BlackBerry Broswer users receive an error message "An error has occurred attempting to play media
I hope it will help.
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Dynamically loading help file from standalone application

Hello All;
I have written into my VI an option to load a help file (.chm) from my main application using the 'Open URL in Default Browser.VI'. When I am in Development Mode, this works perfectly. However, after I have compiled my VIs into an executable, this no longer works (i.e. nothing loads). I am wondering if since the CHM file is not a default LabVIEW VI/LLB if this is where my problem is? I have attached a BMP which shouls what I am doing.
I did manage to get the CHM file to install with my application, but as mentioned, it will not load. I have also attached a bitmap showing my build properties for this.
Any assistance would be greatly appreciated. Thanks.
DJH
Attachments:
Loading CHM Files.zip ‏28 KB

The change required for path information is really not all that hard to understand. If you use something like Current VI's Path, it will return c:\folder\example.vi. When an exe is created, each VI is put into the exe which is really a type of llb file. To prove this, just change the extension to llb and you can view the contents just like like any other llb file. Then the Current VI's Path will return c:\folder\application.exe\example.vi. So, the extra strip path is required to get the folder name. Using the application property App.Kind in your program allows the same program to work in the development mode ans as an exe. It would be difficult for the app builder to automatically add a strip path because it be next to impossible to know what the purpose of the Current VI's Path function is intended by the programmer. You can also simulate the behavior of the app builder by creating an llb and testing all of your path's there before doing the build. Also, by default, the app builder does create a \Data folder but when you do the build, you can change where certain files get installed to.
Message Edited by Dennis Knutson on 05-22-2006 08:44 AM
Attachments:
Strip Path.JPG ‏10 KB

Loading jar files at execution time via URLClassLoader

Hello�All,
I'm�making�a�Java�SQL�Client.�I�have�practicaly�all�basic�work�done,�now�I'm�trying�to�improve�it.
One�thing�I�want�it�to�do�is�to�allow�the�user�to�specify�new�drivers�and�to�use�them�to�make�new�connections.�To�do�this�I�have�this�class:�
public�class�DriverFinder�extends�URLClassLoader{
��private�JarFile�jarFile�=�null;
��
��private�Vector�drivers�=�new�Vector();
��
��public�DriverFinder(String�jarName)�throws�Exception{
��super(new�URL[]{�new�URL("jar",�"",�"file:"�+�new�File(jarName).getAbsolutePath()�+"!/")�},�ClassLoader.getSystemClassLoader());
��jarFile�=�new�JarFile(new�File(jarName));
��
��/*
��System.out.println("-->"�+�System.getProperty("java.class.path"));
��System.setProperty("java.class.path",�System.getProperty("java.class.path")+File.pathSeparator+jarName);
��System.out.println("-->"�+�System.getProperty("java.class.path"));
��*/
��
��Enumeration�enumeration�=�jarFile.entries();
��while(enumeration.hasMoreElements()){
��String�className�=�((ZipEntry)enumeration.nextElement()).getName();
��if(className.endsWith(".class")){
��className�=�className.substring(0,�className.length()-6);
��if(className.indexOf("Driver")!=-1)System.out.println(className);
��
��try{
��Class�classe�=�loadClass(className,�true);
��Class[]�interfaces�=�classe.getInterfaces();
��for(int�i=0;�i<interfaces.length;�i++){
��if(interfaces.getName().equals("java.sql.Driver")){
��drivers.add(classe);
��}
��}
��Class�superclasse�=�classe.getSuperclass();
��interfaces�=�superclasse.getInterfaces();
��for(int�i=0;�i<interfaces.length;�i++){
��if(interfaces[i].getName().equals("java.sql.Driver")){
��drivers.add(classe);
��}
��}
��}catch(NoClassDefFoundError�e){
��}catch(Exception�e){}
��}
��}
��}
��
��public�Enumeration�getDrivers(){
��return�drivers.elements();
��}
��
��public�String�getJarFileName(){
��return�jarFile.getName();
��}
��
��public�static�void�main(String[]�args)�throws�Exception{
��DriverFinder�df�=�new�DriverFinder("D:/Classes/db2java.zip");
��System.out.println("jar:�"�+�df.getJarFileName());
��Enumeration�enumeration�=�df.getDrivers();
��while(enumeration.hasMoreElements()){
��Class�classe�=�(Class)enumeration.nextElement();
��System.out.println(classe.getName());
��}
��}
It�loads�a�jar�and�searches�it�looking�for�drivers�(classes�implementing�directly�or�indirectly�interface�java.sql.Driver)�At�the�end�of�the�execution�I�have�found�all�drivers�in�the�jar�file.
The�main�application�loads�jar�files�from�an�XML�file�and�instantiates�one�DriverFinder�for�each�jar�file.�The�problem�is�at�execution�time,�it�finds�the�drivers�and�i�think�loads�it�by�issuing�this�statement�(Class�classe�=�loadClass(className,�true);),�but�what�i�think�is�not�what�is�happening...�the�execution�of�my�code�throws�this�exception
java.lang.ClassNotFoundException:�com.ibm.as400.access.AS400JDBCDriver
��at�java.net.URLClassLoader$1.run(URLClassLoader.java:198)
��at�java.security.AccessController.doPrivileged(Native�Method)
��at�java.net.URLClassLoader.findClass(URLClassLoader.java:186)
��at�java.lang.ClassLoader.loadClass(ClassLoader.java:299)
��at�sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
��at�java.lang.ClassLoader.loadClass(ClassLoader.java:255)
��at�java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
��at�java.lang.Class.forName0(Native�Method)
��at�java.lang.Class.forName(Class.java:140)
��at�com.marmots.database.DB.<init>(DB.java:44)
��at�com.marmots.dbreplicator.DBReplicatorConfigHelper.carregaConfiguracio(DBReplicatorConfigHelper.java:296)
��at�com.marmots.dbreplicator.DBReplicatorConfigHelper.<init>(DBReplicatorConfigHelper.java:74)
��at�com.marmots.dbreplicator.DBReplicatorAdmin.<init>(DBReplicatorAdmin.java:115)
��at�com.marmots.dbreplicator.DBReplicatorAdmin.main(DBReplicatorAdmin.java:93)
Driver�file�is�not�in�the�classpath�!!!�
I�have�tried�also�(as�you�can�see�in�comented�lines)�to�update�System�property�java.class.path�by�adding�the�path�to�the�jar�but�neither...
I'm�sure�I'm�making�a/some�mistake/s...�can�you�help�me?
Thanks�in�advice,
(if�there�is�some�incorrect�word�or�expression�excuse�me)

Sorry i have tried to format the code, but it has changed to �... sorry read this one...
Hello All,
I'm making a Java SQL Client. I have practicaly all basic work done, now I'm trying to improve it.
One thing I want it to do is to allow the user to specify new drivers and to use them to make new connections. To do this I have this class:
public class DriverFinder extends URLClassLoader{
private JarFile jarFile = null;
private Vector drivers = new Vector();
public DriverFinder(String jarName) throws Exception{
super(new URL[]{ new URL("jar", "", "file:" + new File(jarName).getAbsolutePath() +"!/") }, ClassLoader.getSystemClassLoader());
jarFile = new JarFile(new File(jarName));
System.out.println("-->" + System.getProperty("java.class.path"));
System.setProperty("java.class.path", System.getProperty("java.class.path")+File.pathSeparator+jarName);
System.out.println("-->" + System.getProperty("java.class.path"));
Enumeration enumeration = jarFile.entries();
while(enumeration.hasMoreElements()){
String className = ((ZipEntry)enumeration.nextElement()).getName();
if(className.endsWith(".class")){
className = className.substring(0, className.length()-6);
if(className.indexOf("Driver")!=-1)System.out.println(className);
try{
Class classe = loadClass(className, true);
Class[] interfaces = classe.getInterfaces();
for(int i=0; i<interfaces.length; i++){
if(interfaces.getName().equals("java.sql.Driver")){
drivers.add(classe);
Class superclasse = classe.getSuperclass();
interfaces = superclasse.getInterfaces();
for(int i=0; i<interfaces.length; i++){
if(interfaces[i].getName().equals("java.sql.Driver")){
drivers.add(classe);
}catch(NoClassDefFoundError e){
}catch(Exception e){}
public Enumeration getDrivers(){
return drivers.elements();
public String getJarFileName(){
return jarFile.getName();
public static void main(String[] args) throws Exception{
DriverFinder df = new DriverFinder("D:/Classes/db2java.zip");
System.out.println("jar: " + df.getJarFileName());
Enumeration enumeration = df.getDrivers();
while(enumeration.hasMoreElements()){
Class classe = (Class)enumeration.nextElement();
System.out.println(classe.getName());
It loads a jar and searches it looking for drivers (classes implementing directly or indirectly interface java.sql.Driver) At the end of the execution I have found all drivers in the jar file.
The main application loads jar files from an XML file and instantiates one DriverFinder for each jar file. The problem is at execution time, it finds the drivers and i think loads it by issuing this statement (Class classe = loadClass(className, true);), but what i think is not what is happening... the execution of my code throws this exception
java.lang.ClassNotFoundException: com.ibm.as400.access.AS400JDBCDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:198)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:140)
at com.marmots.database.DB.<init>(DB.java:44)
at com.marmots.dbreplicator.DBReplicatorConfigHelper.carregaConfiguracio(DBReplicatorConfigHelper.java:296)
at com.marmots.dbreplicator.DBReplicatorConfigHelper.<init>(DBReplicatorConfigHelper.java:74)
at com.marmots.dbreplicator.DBReplicatorAdmin.<init>(DBReplicatorAdmin.java:115)
at com.marmots.dbreplicator.DBReplicatorAdmin.main(DBReplicatorAdmin.java:93)
Driver file is not in the classpath !!!
I have tried also (as you can see in comented lines) to update System property java.class.path by adding the path to the jar but neither...
I'm sure I'm making a/some mistake/s... can you help me?
Thanks in advice,
(if there is some incorrect word or expression excuse me)

Problem loading / writing files.

Hi, im trying to create and load a file to the user's home directory as follows:
File f = new File(System.getProperty("user.home") + "/settings.xml");
if (f.exists() == false)
     try
          // If the file doesn't exist, create one.
          f.createNewFile();
          // Get the url.
          URL filePath = f.toURI().toURL();
The file is created properly and exists in the proper directory. However, when i try to use the URL to write out to
file later i get the following error:
C:\Documents%20and%20Settings\User\settings.xml (The system cannot find the path specified)
I believe this is due to the %20's within the URL, how can i remove / handle these? Am i doing something incorrectly?
Also, if the file exists, i try to load it with the following code:
URL filePath = this.getClass().getClassLoader().getResource(System.getProperty("user.home") + "/settings.xml")
However the URL that is return is null and i dont know why.
thanks for the help.

Why do you want an URL for the file? Use the File object to create a FileInputStream or FileReader.

Donu00B4t load duplicates File to a cube through DTP

Hi gurus... i want to know if is possible to avoid load the same data from files to a cube.. doing this trough a DTP.
I think to do this with a step in a process chain that eliminate dupplicates entry in the cube, but the problem is that i haven´t any selection in DTP... this is a full load.
Regards..

Neo,
do you want to avoid loading duplicate files to a cube using DTP or avoid loading duplicates from the file to the cube ?
if it is avoid loading duplicate records from file to cube - then ideally you can use a DSo in between...

Loading flat files located on a server using the Control Center piece ofOWB

Loading flat files from a server with OWB
I am successful loading files with OWB, as long as they resided on my workstation in the C:\ drive. I copied the files to a Linux server into directories owned by Oracle/oinstall, permissions on the directories containing the files are 777. I ran the OWB client from the server with the following results:
Error
RPE-01013: SQL Loader reported error condition, number 1.
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Mar 9 11:15:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (/u00/data/owb_repos1/state_codes.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Mar 9 11:15:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (/u00/data/owb_repos1/state_codes.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
I tried to load the file using the control center from both the windows client and the server client. Can I do this from either one?
I can't import the file in the Design Center from the /u00/data/owb_repos1 directory, it does not show up.
If anyone has received similiar errors from OWB, please tell me how I can fix this. THANKS!!!
[d97886@owbtest owb_repos1]$ pwd
/u00/data/owb_repos1
[d97886@owbtest owb_repos1]$ ls -la
total 24
drwxrwxrwx 2 oracle oinstall 4096 Mar 19 12:14 .
drwxrwxrwx 18 oracle oinstall 4096 Mar 6 16:41 ..
-rwxrwxrwx 1 oracle garrett 1481 Mar 8 07:32 state_codes.csv
[d97886@owbtest owb_repos1]$

Hi
This is what i do for my flat files (i am loading my tables from the flat files):
1) Create location for the files in OWB and it should look something like \\path_to_where_the_files_are. Here you should be able to browse to your Linux box and select the location of the files.
2) Then check whatever you use (i use TOAD) and you should see in owb schema a directory created there which points to the location of the flat file.
3) then just follow the guide to sample the files etc and you are good to go.
Basically OWB has to be able to see the files that are on Linux machine.
Alternatively you can map your Linux share to your windows box (use samba or something) and use it that way.
Sorry if it is stating the obvious.
Hope this helps
Kind Regards
Vix

Load Flat File from App Server

HI, all.
I want load flat file from appliation server. I created CSV file and loaded it on app. server with FM ARCHIVEFILE_CLIENT_TO_SERVER. After I created datasource and tried load data in the infocube. In this procedure I encountered with two problem
1. When I look file in AL11, I doesn't see cyrillic symbols, instead this symbols I see #.
2. When I try load data with data source, I get exception RS_EXCEPTION 000 "File don't open"
Anybody can help me resolve this problem?
wbr, Fanil.

Hi, kodanda pani KV.
2. File is was closed.
1. Can me you clearly explain what you meen?
wbr, Fanil

Error Loading the file from application server

Hi Team,
I'm trying to load the .CSV file from application server and I'm getting the error message.
In the data package
Update to PSA --Green
Transfer Rule -- Green
Update Rule - error ABORT was set in the customer routine 9998
Error 1 in the update
Please help me to provide the solution.
But when I try to load the other files there are no issues. thanks.
Regards,
Senthil

Raj
check the below links, which can helps to solve your issues
Flat file data load
flat file Data loading issue
Mahesh

Infopackage-Load Many Files from Application Server and later Archive/Move

Hi All..
I have a doubt,   I have a requirement of take many files to load into BI 7.0.. I used the infopackage before with option:
Load Binary File From Application server
I load information successfully... only with one file ...but If I can load many files (with different names) like the next list.. I think it's not a good idea modify the file name (path) on infopackage each time).. :
*All of this files will be on one server that itu2019s map into AL11.. Like
Infopfw
BW_LOAD_20090120.txt
BW_LOAD_20090125.txt
BW_LOAD_OTHER_1.txt
u2026.
Etc..
This directory it's not in BW server.. It's other server..but I can load form this location (one file by one)
Could you help me with this questions:
-     How can I Use an infopackage with routine that take all the files..one by oneu2026 in order of creation dateu2026and load into Target? Is it possible?.. I have some knowledge of ABAP.. but I don´t know exactly how I can say to system this logicu2026
-     In addition is it possible move this files to other locationu2026 like into Infopfwarchive u2026 just to have an history of files loaded.
I saw that in infopackage you have an option to create a routine.. in ABAP codeu2026 Iu2019m a little bit confused because I donu2019t know how I can specify all the path..
I try with:
Infopfw
InfopfwFile.csv
Infopfw
This is the abap code that automatically you see and you need to modifyu2026
Create a routine for file name
This routine will be called by the adapter,
when the infopackage is executed.
          p_filename =
          p_subrc = 0.
Thank you for your ideas or recommendations.
Al

Hi Reddy, thank you for your answer
I have some doubuts.. when you explain me the option:
All the above files are appending dates at the end of the file....
You can load the files through infopackage by using Routines and pick the files based on date at the end of the file..***
I need to ask you if you think that when you know the date of the file and the infopackage pick each file... thi can work for many files??... or how it's possible control this process?
About this option, I want to ask you If when you menction Unix code... where it's programed this code?.. in the routine of BW Infopackage??
****Or
Create two folders in your BW in Application server level, in AL11 (ask Basis team)
I call it is F1 and F2 folders.
First dump the files into F1 I assume that the file name in F1 is "BW_LOAD_20090120.txt", using Unix code you rename the file and then keep in the same foleder F1 or move to F2.
Then create InfoPackage and fix the file name (i.e. you renamed), so you don't need to change everyday your file name at infopackage level.Because in AL11 everyday the file are overwrite.
To I get BW_LOAD_20090120.txt file in F1, then I renamed to BW_LOAD.txt and loaded into BW, then tomorrow I get BW_LOAD_20090125.txt in F1, then I renamed to BW_LOAD.txt....
so in this way it will work.You need to schedule the Ubix script in AL11.
This is the way how to handle the application server...I'm using the same logic.
Thank you soo much.
Al

Photoshop crashes when loading a file or image

Using Photoshop cs3 on a PC with Windows 7 installed.
Major Problem: Photoshop gives no response when opening an image of any sort or psd file which ends out with the options to either close the program or close and find a solution online which gives no solution whatsoever.
PScs3 was working just fine when installed but after installing an NVIDIA plug-in did it start bearing some problems. When loading png files, a window normally appears telling me that Photoshop could not parse the file. After seeing this I went to uninstall the plug-in. The problem seemed to went away but shortly after was Photoshop crashing at random, and I do mean random. Starting Photoshop at first seems to nullify the chances of crashing but after either a short period of time or a long period of time will it crash when trying to open a file. Opening multiple files at once doesn't work either but when opening only one file into PScs3 will it cooperate until opening a second. I'm not sure if the plug-in is what caused the problem but I do know everything from there seems hectic. Every crash leads me opening PScs3 again with all of its settings reset from when I first exited normally.
Plugin Used:
Photoshop_Plugins_8.23.1101.1715
Appications Type; 4,317 KB
Company - InstallShield Softwere Corporation
Have you tried uninstalling and reinstalling the program?
Unfortunetly yes I have attempted this and the problem still occurs towards cs3. This makes me fear that the entire program is glitched.
Do you have any other plug-ins installed?
I've checked and there are no other plug-ins attatched.
This is my last option before seeing to reformat my computer. If there is any input about the topic, now is the time.

Just a hunch: change your default printer to something else (a locally attached printer, not networked) or "PrintToPDF", then relaunch Photoshop and try again.
It could also be a plugin (try disabling ALL third party plugins).
And it could be a bad OS install, a virus, etc. It may take a while to find.

Impossible to load YouTube files

Similar Messages

Maybe you are looking for