Impossible to play, import and burn CD

Hi,
I have search on the forums but nothing found...
On PB G4 Titanium 550, with combo MATSHITA Impossible to play, import and burn CD.
Only solution: I insert the CD, I repair permissions with DU and after I launch iTunes... It works perfectly but if I insert another CD... it doesn't works!?!
I must quit iTunes, insert the new CD, repair permissions and relaunch iTunes.
Nothing error in the report of DU!!

it refuses to. i have no idea why. i have the latest version. i don't have any other cd burning software.
just doublechecking something before we proceed. is this the message that you're getting?
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs & DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
... or are you getting something slightly different? if it's a bit different, what does your one say?

Similar Messages

Itunes drivers missing for importing and burning CDs and DVDs are missing

Hello,
I have been dealing with the following problem for a couple days now, I have searched all over the internet, talked to friends and even Apple tech support but the problem has not been solved.
Whenever I access itunes, I get the following warning: "The registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other burning software. Please reinstall itunes."
I have now reinstalled itunes several times and completely removed then reinstalled as instructed, but the message continues to appear and itunes will not allow me to burn cds. Tech support advised to create a new user account on my computer which I did, it seemed to work but all I can do is import music. I cannot burn any. All my settings and playlists aren't on this account. But, are on my other one where the first message appeared.
Can anyone help? Please. I have struggled with this and cannot figure out what else to do except reset my computer to its factory setting, but would really like to avoid doing so. Please help.
I have a new HP computer running Windows Vista, I have never experienced any problems with itunes until now. I bought a new 120GB ipod in November and it works fine. Oh, I have gotten rid of Nero which was installed when this problem first occurred.
Thank you.

Hmm. "iTunes registry error Vista fix burning and importing issues". play around with the search words till you find something relevant. Not sure, but following is something that might help. I am not a vista user so I can't help much. Good luck.
http://www.vistax64.com/software/194044-itunes-registry-error.html
*But be warned that messing with registry might be fatal to your current OS intallation. So think all the way through before you do anything. I think you can keep a back of the registry so if something goes wrong you can restore it, but thats in XP, not sure about vista.*

When I attempt to log on to I tunes I get the following message "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing This can happen as a result of installing other CD burning software Please reinstall

When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill Martin

I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

I have windows 7 and when i start up i tunes i get a message..."The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i

when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chris

Refer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

I received the following message when iTunes launches: "The registry settings used by the iTunes drivers for importing and burning CD's or DVD's are missing. This can happen as a result of installing other CD burning softwarre. Please reinstall iTunes"

Everytime I connect my iPod Touch (4th Gen) to my laptop, running Win 7 (64 bit) I get the message "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have reinstalled iTunes several times and it has not fixed the issue. I am running ver 10.2.2.12 of iTunes. I HAVE NOT installed any other burning software to my laptop either. I haven't tried uninstalling iTunes and then re-installing it yet. Would that perhaps fix the problem? I've read that many users have had issues with the new version of the software and I was wondering if that might be causing my issue. I'd like to point out that iTunes seems to work after getting rid of the message, but I haven't tried to burn any CDs or put music from a CD to my laptop. Any ideas on how to get rid of the annoying message?
I also am having trouble hooking up with our other computers using Homegroup. I noticed quite a lot of people are having the same issue and hopefully they come up with a fix for that soon.
Thanks in advance.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

HT203242 I use ipod classic 120G. When I launch itunes I first of all see a message "The registry settings used by itunes drivers for importing and burning cds & DVDs are missing." I cannot sync my ipod. Any ideas?

I use an ipod classic 120G. When I try to launch itunes I first of all see a box stating "The registry settings used by itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall itunes" This I have done. obviously I cannot burn CDs but worse still is my ipod is not being recognised by itunes and will not sync. I have not installed any new burning softeware. Any suggestions please?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Itunes won't install drivers to import and burn cd's

it refuses to. i have no idea why. i have the latest version. i don't have any other cd burning software. i have unstalled and reinstalled. does anyone have an idea why? i am very frustrated!
Windows XP

it refuses to. i have no idea why. i have the latest version. i don't have any other cd burning software.
just doublechecking something before we proceed. is this the message that you're getting?
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs & DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
... or are you getting something slightly different? if it's a bit different, what does your one say?

When i click on itunes to open, message says: the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes. I'm inexperienced. Please help

When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes." I am a really inexperienced computer user. My computer is a windows 7. Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie

Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems?

When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded?

When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded

many thanks.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

My itunes is not downloading correctly even after i uninstalled all software of apple keeps saying the registry is missing to import and burn cds??? it is not on a mac computer

my itunes is not downloading correctly even after i uninstalled all software of apple keeps saying the registry is missing to import and burn cds??? it is not on a mac computer

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes. Really?

I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes. Really?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

How to install drivers for importing and burning CDs

When I open my iTunes program, I receive a notice that: the drivers for importing and burning CDs and DVDs are missing. I have attempted to re-install the iTunes program, but to no avail.

See iTunes for Windows: "Registry settings" warning when opening iTunes and/or iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2

Import and Burn CD Ding When Complete

How do I turn off the 'ding' notifier in iTunes when an import or cd burn is complete? I can't find how to do this and when I went to the Apple store, the guy at the 'Genius Bar' had no answer. I appreciate any help.

it refuses to. i have no idea why. i have the latest version. i don't have any other cd burning software.
just doublechecking something before we proceed. is this the message that you're getting?
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs & DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
... or are you getting something slightly different? if it's a bit different, what does your one say?

Impossible to play, import and burn CD

Similar Messages

Maybe you are looking for