Impossible to reduce the Volume ?

Hi ! First , i really want to excuse my English. But it´s not my native Language. Anyway i hope i can descripe my Problem clearly and somebody can help me
I own a IPod/5G 80GB. My Problem is that i can´t reduce the Volume anymore to a level which allows me to sleep while im listen to Music with my IPod, because its simply too loud. If i scroll the Volumecontrol to the left IT SHOULD become more quietly to silent. But since today it´s even with the Volumecontrol far left still loud. Impossible to reduce the Volume in the way it work before.
I did make a reset ... set Options to default .. did a restoration in ITunes but nothing repairs my Volume Control. If i move the Volume Control to the rigth the Volume increases a bit. But in the other Direction it seems not to work. Has anyone suggestions what i have to do ?
Thx in advance
Thorsten

I will give this a bump
Nobody got the same Problem ? I found with Google 4 or 5 other Threads with the same issue. But there was never posted a "solution"
I don´t find anymore the "Certificate of warranty". So i can´t go to the shop where i bought my IPod

Similar Messages

  • I have an audio file that plays automatically and I can't control it other than reduce the volume.  How do I turn it off?

    I have picked up an audio file that I can't control other than reduce the volume.  I don't know how to turn it off and it plays over any other audio.

    Is this an Apple installed audio clip?
    Have you checked to see if all of your browsers doesn't have a web page that is opened that has the audio? (Best thing is to quit all of your browsers to get that out of the way.) If it goes away, then find out which browser (if multiple), and then figure out what page or just close it if you wish.
    Once you get the browsers out of the way and the audio is still playing. Then quit other programs.
    KOT

  • How do I gang automation? ie. I need to reduce the volume on the master fader, so I need to reduce the volume of all my faders ( ideally simultaneously.)

    How do I gang automation? ie. I need to reduce the volume on the master fader, so I need to reduce the volume on all my faders (ideally simultaneously.)

    Open the Mixer, select all the faders at once and lower 1 of them. the others will follow proportionally.
    Or you can just put a gain plugin in the master output and lowerr the gain coming to the masterfader.

  • How am I able to get rid of or reduce the volume on the video I have filmed?

    Hi!
    How would I  be able to get rid of or reduce the volume on the video clip I have filmed?

    Turn on the audio waveforms in the project window.
    Drag in the waveform to select the area you want to reduce and pull down the level line.

  • My Ipod nano automatically reduces the volume and does not hold my attempts to  increase the volume.  Help!

    My Ipod nana automatically reduces the volume and does not hold my attempts to increase the sound. Help.

    There is a Volume Limit setting on the iPod.  From the main screen
    Settings -> Playback -> Volume Limit
    You can check that setting to see if it set too low.

  • How do i reduce the volume of a audio track

    ok you probably thought this was stupid, the title doesn't really explain the problem. So i recorded a video game gameplay and the game and voice audio are different, like on xbox you can adjust each, so voice is louder than game and vice versa. The problem is the game audio volume (lets say) is too high, and you can barely hear the voice. I don't know if its possible to do but can i lower the higher volumed game and increase the low volumed voice. i am using audition cs6

    If they are overlayed then there isn't realy anything you can do. If they aren't overlaid then you can use various tools in Audition to match the volumes better. Is the game audio in stereo or mono? And is the voice in the centre if the two are mixed together as a stereo track?

  • How do I get the ducking to work for detached audio clips to reduce the volume of background music?

    I have detached audio from clips which explains what I am doing in the video clips (they are muted). I also have a song that I want to play at normal volume in the background when there isn't an audio clip in which I am talking and to reduce volume when I am. On the audio clip of me talking I have the ducking checked and set but there is no change in the music volume. Does anyone know how to fix this?

    Hi JC Thompson,
    Welcome to the Apple Support Communities!
    I understand you are having issues with the sound from the receiver of your iPhone. Please use the following steps in the article below to try and isolate and resolve this issue.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    I hope this helps,   
    -Joe

  • The volume for music clip that I drag into Imovie 08 can't be reduced.

    I have dragged several audio tracks over to my video that I am editing. Everything was going fine I was able to reduce the volume to the percentage I wanted then suddenly all the tracks on my video are playing at 100%. I check the audio information and it is set at a lower percentage. Just to experiment I set the volume at 0% and it still plays at 100%. This has happened before but all I needed to do was restart my mac and it was fine. This time it didn't work. I have spent several hours setting up the audio on my video it would really suck if I had to do it all over again.
    I don't know why people say Macs have less problems than PCs. Mine doesn't.

    thanks for the link but unfortunately it doesn't help. I think my IMovie 08 might be corrupted or something. Because nothing can reduce the imported audio track's volume. I might need to take it to back to my store and ask them to have a look at it.

  • When I send project to iTunes the volume is too low. I have auto normalize checked.

    When I save project to itunes the volume is too low on the entire project.  I have auto normalize checked.  I have been sure to reduce the volumes below the red clipping dots.  This includes the master volume.  It is fine in GB, but in itunes I need to increase the volume slider to max to bring it up to what I was hearing in GB.  Is sthere something else I should do to reproduce more volume when I share a project to itunes?  Thank you.

    DId you try a comparioson when exporting the same song with and without "Auto Normaize".
    Technically there is the possibility that "Auto Normilize" will reduce the overall level of your final mix. If there is a short spike above 0dB that you don't hear as an audible pop and GarageBand brings down the overall level to that that spike to 0dBFS, and by doing so, lowering that level of your mix by that amount.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • Can i change the volume level for just a part of a track?

    i am trying to raise the volume level for just a little section of a track without raising the volume for the whole track, just a one little section. can i do that on garage band? how would it do that?

    Yes you can
    On the track instrument selector, there is a row of small buttons, one being an upside down triangle. Click the triangle to display Automation. The default controller is Track Volume. You will see a bright green line which is the volume level throughout the track..
    Simply, go to the location where you want to reduce the volume, click on the green line to insert a control point. The first click is used the maintain the current volume. Go to the point where you want the volume to be reduce to, and click-and-hold the line and drag the new control point to the target volume.
    NOTE: Use the Shift key to adjust incremental amounts.
    Have fun!!

  • The volume always starts at maximum

    whenever I start any application which requires audio such as games,youtube,music etc..the volume always starts with maximum..I have to reduce the volume everytime.....it really annoying especially when headphone is used..how can i avoid this...

    i tried that..but not working....the volume still starts at maximum...Even when i starst a youtube video at 30% volume and forward the video a little bit the volume goes to mmaximum...any application when i opeen violume starts at maximum...when forward it or start again the volume goes to maximum...

  • When is the volume problem going to be fixed?

    I'm new to the world of Macs (just bought in January) after 15 years of PCs.
    Just wondering how it works in the Apple universe - how long does it usually take for bug fixes to come out?
    It's only been a couple of days but I am already tired of volume setting 1 being acceptable to slighty quiet (depending on the application). It is very annoying to not be able to reduce the volume any less than that - for example if someone wanted to be on the phone in the room with me, I would have to mute the sound rather than just being able to turn it down like I used to.
    I don't necessarily need it down to the same level as before but some reduction is needed. Not everyone uses their Mac in a noisy office!!
    iMac 20"   Mac OS X (10.4.9)  

    I'm not sure what you're talking about here. In my quiet home office, I can barely hear the system beep or iTunes music -- sometimes not at all, depending on the song -- with the system volume set to the lowest setting. Slightly below medium is acceptable for me. You probably have some other sound output setting that is interfering. Are you using external powered speakers with the volume jacked up? Or perhaps you need to change the various output settings in the Sound pane of System Preferences?
    Regardless, I don't think you should be looking for a bug fix here, because unless there's some new bug in 10.4.9 (I'm still at 10.4.8), there's no bug here, AFAIK.

  • How ODI will reduce the source data to process?

    By using ODI we can get High efficiency of integration by reducing the volume of source data processed in the flow. How ODI will reduce the source data to process?

    Hi ramana,
    See the example.
    DO.
       READ DATASET s_filename INTO I_TEMP.
       IF SY-SUBRC <> 0.
        EXIT.
       ELSE.
         move I_TEMP to I_FINALTAB.
         append I_FINALTAB.
         clear I_FINALTAB.
      ENDIF.
    ENDDO.
         In the above code we are moving the data form file to i_temp and i_temp to I_FINAL.
    Here before moving to i_FINAL.
    use  TRANSLATE i_temp to UPPSERCASE.
    Then move to i_final.
    Pls. reward if useful.

  • Reducuing the volume in the middle of an audio track

    I am having a problem trying to figure out how to reduce the volume in the middle of an audio track.  Can someone enlighten me?

    Brucek75,
    There are several ways to attenuate Volume of Audio in PrE. This article goes into detail on several of those: http://forums.adobe.com/message/3472343#3472343
    The Audio Volume Keyframes (applied in at least one of two ways), will do exactly what you want.
    Good luck, and hope that helps.
    Hunt

  • I could not turn up the volume on my iPad using the volume button on the side. Is there any way to fix this?

    I could not turn up the sound (volume) on my iPad 2 using the volume button on the side. This happens after I have reduced the volume to minimum using the same volume button. The volume indicator does not move up at all. Note: it was not on mute, so the issue seems to be the button.

    Try this and see if it works.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for

  • Can you use an .mac alias as "from" email address in .mac account?

    My .mac account is in my full name @.mac and MAIL automatically uses that as the "from" email address when i send mail. Is there any way to use one of my .mac aliases instead?

  • Table content disappearing when PDF'ing in FrameMaker 10

    Recently when I've pdf'd a book in FrameMaker 10, some of the content in the tables is missing. It can be either text or graphics and usually occurrs towards the start of the book, but it won't be throughout the book. This doesn't happen with every b

  • Lov+shortcut of report 6i on user desktop

    hi all i have created a formletter type of report in arabic using  reports 6i the content is coming fine ,i mean the arabic data from database like employee name ,employee designation in arabic is coming fine, i require to create an Lov on the compan

  • Need config table which stores data for Vendor Master changes

    Hi Gurus, I need to have the name of the config tables which store the details of the Vendor Master configuration changes based on account group information. For Example, For a given Account Group(ZM09), the VAT Registration field in the control data

  • Invisible character as a separator

    I have a description column (VARCHAR2 type) in a table. I need to add a separator (at a pre-determined position which is based on some logic) within the description to identify it in 2 portions. The description with the separator needs to be persiste