Impossible to turn off GPU fan on GTX 770?

The fan on my GPU is annoying and I'd like to turn it off completely.
I've secured that there's a good air flow and temperature in my case, and as I'm not gaming these months, it should be okay to turn off the GPU fan.
I tried using MSI Afterburner, but you can't set the fan speed any lower than 26% of max. fan speed.
This is the GTX 770 I have:
MSI GeForce GTX770 OC 2GB
N770-2GD5/OC
I tried disabling this graphics card in my OS (Windows 7 Prof. 64 bit), but the GPU fan was still running.
Is there no other way than to remove the graphics card completely?
Hope someone can help
Best,
Henrik
Denmark

It is not possible to turn off the fan via software as the vga's firmware will ensure that it is running at least at minimum speed to seed up when needed. GTX770 unlike new Maxwell gpus should also be too hot to be cooled passively with the standard heatsink. If you want to stop the fans none the less you need to unplug them from the pwm header of the card. As the card couldn't start the fans at dangerous temps then it would be quite risky. Note that not only the gpu but also vrms might overheat.

Similar Messages

NewBlueFX - CC versions - turning off GPU for all products needed

I've had NewBlueFX plugins for quite a while now - but the one issue that bugs me about using them is I have to turn off GPU for all products when applying them (virtually every job). I was advised by NewBlue to do this when I was having problems editing and playback being messd around visually why editing.
Just installed (correctly) their updated CUDA versions and still no difference in preformance and still have to turn off GPU...
Clicking on the plugin applied>info>click "disable GPU for all products" and it all runs smoothly.
Does anyone else have the same issue? Is it an issue or is this normal? Why?
Should it not be that effects plugins like this should actually work with all the bells and whistles turned on - not off?
Having spent out on a machine with 24 cores, a Quadro 2000 card and stacks of memory - the machine should be able to handle a NewBlueFX plugin with GPU and everything turned on...?
Am willing to learn on this...

Just below "Extras" in the View menu there is "Show...", where you can check/uncheck individual items - permanently.
Ctrl+H (extras) is just a bucket to collect them all and turn off with a single shortcut.

Impossible to turn off autoscaling?

LV 2010.0, Win Vista.
I have a Waveform chart with four channels(plots), and four scales.
While running, it seems impossible to turn off AUTOSCALE Y, except for plot/scale #0
If I choose AUTOSCALE Y on any other scale, it affects only plot #0.
Doesn't the menu apply to the scale that I'm clicking on?
See this JING: http://screencast.com/t/RfaRoiOq
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

OK, attached is a VI that proves (I think) that this is a LabVIEW bug.
SubPanels have nothing to do with it.
Re-entrant has nothing to do with it.
It has to do with EVENT REGISTRATION, which was on my original code (where I made the JING), but not on my whipped-up example.
If you run the attached VI as is, you will see no failure. All scales are independent, as expected.
If you ENABLE the EVENT REGISTRATION vi, then the chart starts misbehaving: changing AUTOSCALE on scales #1, #2, or #3 affects ONLY scale #0, not the one you clicked on.
There is no event handler for the event, though adding one doesn't change anything.
I don't know yet, whether it has to be a SHORTCUT ACTIVATION event, or whether it has to be on the chart at all.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks
Attachments:
ChartAutoScaling.llb ‏21 KB

Impossible to turn off the computer

It is impossible for me to turn off the computer by clicking the normal sequence (apple symbol and turn off the computer). I need to press the on/off button for some seconds to be able to turn it off. I need your help, please.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

FM2-A75MA-E35 - Software to turn off System Fan 2 ?

Will there be an update to allow users to turn off SYSFAN2 ? It would make life easier rather than getting a physical switch.

>>How to contact MSI.<<

Turned off loud fan

alright so i searched as much as i can and still can't fine the anwser so here gose
i got a imac G5 isight 20" the computer is off the power indicator is not on but the fan of the computer is running at top speeds and sound like a hair dryer, was happen for over an half an hour when i fianlly figured out it was the computer not my wife drying her hair any thought on what to do or dose it sound like this a job for the local AASP

Welcome to Discussions - try resetting the SMU.
Please post back,
Miriam

Turn off GPU on my Dell M4400?

Hello,
I asked myself if it is possible to use my M4400 without GPU. I don't know how this could be achieved and if it is possible with a M4400.
Thank you!
Clementis

Well. I think it would depend on if your laptop has another video device. And what I mean is, if that GPU is the only device that has the ability to render, then no.
I think it would be very very difficult to do. Sorry for being so negative.
-Ghosty

Turn off fans on mac pro

Hi all, i founded many programs to monitor fans speed and temperature like iStat... Does anyone known if exists a program that allow me to turn off some fans ? regards

Turning off any fans in the mac pro, would surely result in something very very bad, very very quickly.
CPU fans absolutely must remain function... after 20 minutes of high load your CPU's could boil water - luckily they will emergency shutdown before then... basically your machine turns off and your CPU(s) are at risk of serious and permanent heat damage. Its a bad idea to kill the fans by the hard drives... hard drives will turn off when overheated, and they will have drastically reduced lifetimes. A power supply, as a brody says, will likely catch on fire without its fan running. The northbridge on these babies gets hot as **** already................... and RAM error rates go up FAST as it gets high
In short turning off any of these fans could, and will, cause serious damage to your computer.

ITunes Match will not turn off on my iPhone 5s

The problem:
I've got it turned on on my iPhone 5S, running iOS 7.1.2.
I go into Settings -> Music, and flip the toggle to turn off iTunes Match. Back up to Settings, go back into Music, the toggle is turned back on.
It is impossible to turn off iTunes Match on my phone. iTunes (running on Macbook Pro Air, w/ OS X 10.9.4) shows the phone as having iTunes Match turned on, always, no matter what. I've tried unmounting the phone, shutting down iTunes while changing the setting on phone, etc. Nothing changes the problem.
As others have reported, if I attempt to update the cloud with new playlists or tracks added to my laptop, it claims it is syncing to iTunes Match, but never completes this process.
At this point I'm paying for a service that is significantly impeding my ability to listen to music I own on devices I also own. Thanks Apple.

Hi,
You can turn off auto renew by signing into you iTunes account on your computer.
With regard your iPhone have you tried signing out of the iTunes Store?
Jim

Turn off display in XP with bootcamp

in XP , the energy savings function wont work, its impossible to turn off the screen even via screensaver.
is this problem known??
is there a way to do it anyway???
thanks

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
Here is a link;
Forum: Boot Camp Public Beta

Can't restore nor can I turn off my iPod

HELP!
My iPod is connected since last night to my laptop and I keep getting an error saying could not be restore 0xE800006B. Also it is impossible to turn off my iPod so I have to leave it connected to my laptop so that I don't drain the battery.
My iPod is stuck in aloop trying to restore but after 24 hr only have reached less then half the progress bar.
Please I need a solution, my iPod is what keeps me organisez
HELP!

Mine is doing the same thing! I just tried to turn it off and now I'm stuck with the loading wheel!! I can't do anything! Even when I plug it into the computer, itunes won't even recognize it. It says almost the same error but it has a 5 at the end insted of a B: 0xE8000065
I don't know what to do.

How to turn off spelling check in iCal

hi, i am new to mac (yeah, i finally made The Transition) and i have the latest Mac OS X Version 10.6.3. would anyone please advise me on how to turn the spelling check off in iCal. i can't seem to find any right answer. thanks a lot.

A post from April 2010 and a similar question from 2009, both unanswered. Does this mean iCal spell checking can't be disabled?
I find it outrageously annoying, worse than ordinary annoying, because the calendar is full of ten-dollar words like surnames that will always note as wrong. It's like having a surname highlighting feature. I can't even turn it off in a single event because the next time I launch iCal it's back on again by default. For that matter, why is the active toggle there at all if you can only turn it off for the duration of a session? I suppose I've adapted by turning it off manually every time a red squiggly appears, but I haven't stopped thinking about it.
Is spell check impossible to turn off permanently?

How to turn off threaded sms on iPhone 4?

Hi all
I get lost in the way iPhone stores the sms messages. I cannot find back to both incoming and outgoing messages since they are not stored in one linear time sequence. The same functionality was also (by default)?) on the e-mails but happily that could be disabled. If it is impossible to turn off threaded sms I quite frankly must buy another phone.
Hope someone out there has discovered how to disable the threaded sms functionality.
Cheers
FR

This is not an option on the iPhone.

How to turn off keyboard sound in Windows 8 (not the touch keyboard, but the regular one)

The clicking noise whe I am typing on my wireless keyboard seems impossible to turn off. ANy way to get rid of this sound?
Thanks!

Getdaisy, welcome to the forum.
You can go to PC Settings / PC and devices / Typing / Touch keyboard / turn off "Play key sounds as I type".
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

MacBook Pro (June 2010) freezing with screen turned off (not sleep)

Hi.
This issue has happened to me two times now. I recently bought a Macbook Pro 13 inch and the problem has happened when I let the computer sitting there without moving anything with its lid opened, after like 20 minutes when i'm going to use it again it has the screen turned off, the fan on and the indicator light half way on constantly but anything would respond, to use it again I have to hold down the power botton until it turns off.
It was not sleeping because I have the sleep timer set to never, what I do have on is the sleep display timer to 15 minutes.
Any ideas?
Thanks

Please help!
Now I got this then of turning it back again and a 3 min loading of the OS.
What could it mean, I don't know how to read this please
Interval Since Last Panic Report: 439785 sec
Panics Since Last Report: 1
Anonymous UUID: 99693572-2AB2-4994-91C1-BA78E287216A
Sun Nov 28 08:09:45 2010
panic(cpu 0 caller 0x2aab55): Kernel trap at 0x00333cc0, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000010, CR3: 0x0ec75000, CR4: 0x00000668
EAX: 0x00000000, EBX: 0x169c152c, ECX: 0x711f0000, EDX: 0x084f0800
CR2: 0x00000010, EBP: 0x75dc3d98, ESI: 0x169c1504, EDI: 0x00853800
EFL: 0x00010246, EIP: 0x00333cc0, CS: 0x00000008, DS: 0x75dc0010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x75dc3ba8 : 0x21b50c (0x5d42fc 0x75dc3bdc 0x223974 0x0)
0x75dc3bf8 : 0x2aab55 (0x59616c 0x333cc0 0xe 0x596336)
0x75dc3cd8 : 0x2a09a8 (0x75dc3cf0 0x1 0x75dc3d98 0x333cc0)
0x75dc3ce8 : 0x333cc0 (0xe 0x3700048 0x75dc0010 0x2a0010)
0x75dc3d98 : 0x34bd51 (0x169c152c 0xc1d46f0 0x75dc3dc8 0xa284e9c)
0x75dc3db8 : 0x383596 (0x169c1504 0xffff 0x1 0x33b12f)
0x75dc3de8 : 0x392ce4 (0xa284e9c 0x246 0x75dc3e78 0x0)
0x75dc3e08 : 0x4b0d1c (0xa2a6990 0x9 0x0 0x0)
0x75dc3e68 : 0x4b0dc4 (0xa2a6990 0x1 0x75dc3eb8 0x47169e)
0x75dc3e88 : 0x46ce50 (0xa2a6990 0x75dc3ed8 0x8707bc0 0x8a422a0)
0x75dc3ef8 : 0x46ec01 (0x91548b0 0x9d34ee0 0x8a422a0 0x2329f0)
0x75dc3f38 : 0x46ecd2 (0x0 0x46 0x75dc3f5c 0x1)
0x75dc3f78 : 0x4f12e8 (0x8a422a0 0x8b11968 0x85d9ae4 0x54ba08)
0x75dc3fc8 : 0x2a143d (0x8b11964 0x0 0x10 0x8b11964)
BSD process name corresponding to current thread: mDNSResponder
Mac OS version:
10H574
Kernel version:
Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 300147122741321
unloaded kexts:
com.speedbit.driver.vadriver 1.0.2 (addr 0x599fe000, size 0x20480) - last unloaded 127304656841847
loaded kexts:
com.speedbit.driver.vadriver 1.0.2 - last loaded 127304755007100
com.vmware.kext.vmnet 3.0.0
com.vmware.kext.vmioplug 3.0.0
com.vmware.kext.vmci 3.0.0
com.vmware.kext.vmx86 3.0.0
com.parallels.kext.prl_vnic 5.0 9220.531002
com.parallels.kext.prl_netbridge 5.0 9220.531002
com.parallels.kext.prlusbconnect 5.0 9220.531002
com.parallels.kext.prlhidhook 5.0 9220.531002
com.parallels.kext.prl_hypervisor 5.0 9220.531002
com.rogueamoeba.hermes 2.0.2
com.paragon-software.filesystems.ntfs 82
com.vara.driver.VaraAudio 1.0.2
com.Cycling74.driver.Soundflower 1.5.1
com.iospirit.driver.rbiokithelper 1.8.0
com.pctools.iantivirus.kfs 1.0.1
com.AmbrosiaSW.AudioSupport 2.3.6
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.IOBluetoothA2DPAudioDriver 2.3.8f7
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleBacklight 170.0.34
com.apple.GeForce 6.2.4
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.driver.AppleUSBOHCI 4.1.5
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOAudioFamily 1.7.9fc4
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.2.4
com.apple.NVDAResman 6.2.4
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IO80211Family 312
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.driver.NVSMU 2.2.7
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.1)
Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 232.89 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26100000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x06500000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06610000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x06300000

Impossible to turn off GPU fan on GTX 770?

Similar Messages

Maybe you are looking for