Impossible to use message With 3G
S'inscrit last update itvs impossible to use i message With 3G the ôther apps nô problème face Time si ok on l'y problème With message and With wifi everything is ok
Tanks for help
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.
Similar Messages
-
Using Messages with Multiple Users and Multiple Computers
I have two users who share two different computers, switching between them during the day.
I'd like to use messages on them for us to send text messages in the office, however, it asks them on logging in (most, but not everytime) to re-enter their apple id password. It seems that using icloud for messages among multiple computers like this isn't good. its like it wants each computers to be linked with a particular user, and doesn't like it that the users are moving around from computer to computer
Options to avoid this nuisance?
1. Would bonjour messaging work, and then just remove the icloud account from messages?
2. How about setting up the message server on my ML Server, would that avoid this problem?I'd say probably make sure that in the advanced tab under edit>preferences you should make sure they both point to the same file.
My turn now, how to i post a thread, there's no button. -
Why can't i use messages with my apple id
Every time i try to use messages or iCloud and i put my apple id in it trys to validate, then shows a message saying it cannot validate my apple id yet i can still log in to apple store and iTunes. Why can't i use this apple id for messages?
Try now. There was an Apple problem when you posted.
-
Impossible to use mAb with Alcatel phone
Hello
I try to configure mab authentication with alcatel Phone "ipTouch".
The radius is an ISE version 1.2.1
It is impossible to autenticate with mab.
On the Ise the error is:
"Event 5434 Endpoint conducted several failed authentications of the same scenario"
" Failure Reason 11514 Unexpectedly received empty TLS message; treating as a rejection by the client"
On the switch the error message is:
2960-09#
Dec 15 11:13:50.090: %AUTHMGR-5-START: Starting 'mab' for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID
0A0A510A0000010A2E95860F
Dec 15 11:13:50.125: %MAB-5-FAIL: Authentication failed for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID
0A0A510A0000010A2E95860F
Dec 15 11:13:50.125: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'mab' for client (0080.9fc8.a9eb) on
Interface Gi1/0/11 AuditSessionID 0A0A510A0000010A2E95860F
Dec 15 11:13:50.125: %AUTHMGR-7-FAILOVER: Failing over from 'mab' for client (0080.9fc8.a9eb) on Interface Gi1/0/11
AuditSessionID 0A0A510A0000010A2E95860F
2960-09#
Dec 15 11:13:50.125: %AUTHMGR-5-START: Starting 'dot1x' for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID
0A0A510A0000010A2E95860F
Here is the switch config
+++++++++++++++++
interface GigabitEthernet1/0/11
description HOST PORT WITH AUTHENTICATION
switchport access vlan 68
switchport mode access
switchport nonegotiate
switchport voice vlan 78
authentication event server dead action reinitialize vlan 68
authentication event server dead action authorize voice
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer restart 300
authentication timer reauthenticate server
authentication timer inactivity server
mab
dot1x pae authenticator
dot1x timeout tx-period 5
spanning-tree portfast
end
global switch config
+++++++++++++++
aaa new-model
aaa authentication login default local group radius
aaa authentication dot1x default group radius
aaa authorization exec default local group radius
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 10.1.30.11 server-key 7 023201575A080B34080F
client 10.1.30.12 server-key 7 122D001B430508116E6A
dot1x system-auth-control
dot1x critical eapol
radius-server attribute 6 on-for-login-auth
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 1 tries 3
radius-server host 10.1.30.11 auth-port 1812 acct-port 1813 key 7 0030160A55550F134B60
radius-server host 10.1.30.12 auth-port 1812 acct-port 1813 key 7 0030160A55550F134B60
radius-server deadtime 1
radius-server vsa send accounting
radius-server vsa send authentication
Could you please help me.
Michel MisonneHi
Yes the mac is in the Identity endpoint.
During this night, the Phone reboot and now it is OK !!!
I do not know why ?
I changed nothing !
But here is the debug.
Also the ise is configured with authentication protocol Pap-Ascii = Enable
and "Calling stat id" and "Check pass" checked."
The onfig of the phone is
-Mac to login
-MD5 profile = OFF
-Tls Profile OFF
Her is te debug. ( when it works well)
conf t
Enter configuration commands, one per line. End with CNTL/Z.
2960-09(config)#endshutdown int gigabitEthernet 1/0/11
2960-09(config-if)#no shu
2960-09(config-if)#no shutdown
2960-09(config-if)#
2960-09(config-if)#
2960-09(config-if)#
2960-09(config-if)#
2960-09(config-if)#end
2960-09#
Dec 16 08:33:54.962: %ILPOWER-7-DETECT: Interface Gi1/0/11: Power Device detected: IEEE PD
Dec 16 08:33:56.157: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/11: Power granted
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
Dec 16 08:33:56.241: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/11, changed state to down
Dec 16 08:33:56.322: %SYS-5-CONFIG_I: Configured from console by admin on vty0 (10.10.68.4)
2960-09#
Dec 16 08:34:02.924: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/11, changed state to up
Dec 16 08:34:03.924: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/11, changed state to up
2960-09#
Dec 16 08:34:05.088: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/11, changed state to down
2960-09#
Dec 16 08:34:06.095: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/11, changed state to down
2960-09#
Dec 16 08:34:09.800: %AUTHMGR-5-START: Starting 'mab' for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID 0A0A510A0000011E3329AE1E
Dec 16 08:34:09.800: RADIUS/ENCODE(0000025F):Orig. component type = Dot1X
Dec 16 08:34:09.804: RADIUS(0000025F): Config NAS IP: 0.0.0.0
Dec 16 08:34:09.804: RADIUS(0000025F): Config NAS IPv6: ::
Dec 16 08:34:09.804: RADIUS/ENCODE(0000025F): acct_session_id: 597
Dec 16 08:34:09.804: RADIUS(0000025F): sending
Dec 16 08:34:09.804: RADIUS/ENCODE: Best Local IP-Address 10.10.81.10 for Radius-Server 10.1.30.11
Dec 16 08:34:09.804: RADIUS(0000025F): Sending a IPv4 Radius Packet
Dec 16 08:34:09.804: RADIUS(0000025F): Send Access-Request to 10.1.30.11:1812 id 1645/198,len 249
Dec 16 08:34:09.804: RADIUS: authenticator D3 5F 99 C6 EE 9F 9F 96 - 7C 1B A1 B9 32 1C 78 61
Dec 16 08:34:09.804: RADIUS: User-Name [1] 14 "00809fc8a9eb"
Dec 16 08:34:09.804: RADIUS: User-Password [2] 18 *
Dec 16 08:34:09.804: RADIUS: Service-Type [6] 6 Call Check [10]
Dec 16 08:34:09.804: RADIUS: Vendor, Cisco [26] 31
Dec 16 08:34:09.804: RADIUS: Cisco AVpair [1] 25 "service-type=Call Check"
Dec 16 08:34:09.804: RADIUS: Framed-IP-Address [8] 6 10.10.78.250
Dec 16 08:34:09.804: RADIUS: Framed-MTU [12] 6 1500
Dec 16 08:34:09.804: RADIUS: Called-Station-Id [30] 19 "F0-9E-63-E7-E1-8B"
Dec 16 08:34:09.804: RADIUS: Calling-Station-Id [31] 19 "00-80-9F-C8-A9-EB"
Dec 16 08:34:09.804: RADIUS: Message-Authenticato[80] 18
Dec 16 08:34:09.804: RADIUS: 5F 60 06 35 54 F6 CB 60 3A D6 A9 87 92 F0 0D 70 [ _`5T`:p]
Dec 16 08:34:09.804: RADIUS: EAP-Key-Name [102] 2 *
Dec 16 08:34:09.804: RADIUS: Vendor, Cisco [26] 49
Dec 16 08:34:09.807: RADIUS: Cisco AVpair [1] 43 "audit-session-id=0A0A510A0000011E3329AE1E"
Dec 16 08:34:09.807: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
Dec 16 08:34:09.807: RADIUS: NAS-Port [5] 6 50111
Dec 16 08:34:09.807: RADIUS: NAS-Port-Id [87] 23 "GigabitEthernet1/0/11"
Dec 16 08:34:09.807: RADIUS: NAS-IP-Address [4] 6 10.10.81.10
Dec 16 08:34:09.807: RADIUS(0000025F): Started 5 sec timeout
Dec 16 08:34:09.856: RADIUS: Received from id 1645/198 10.1.30.11:1812, Access-Accept, len 283
Dec 16 08:34:09.856: RADIUS: authenticator BC 72 21 F4 37 7D BE B1 - 03 A7 CE F3 3A DB EE DA
Dec 16 08:34:09.856: RADIUS: User-Name [1] 14 "00809fc8a9eb"
Dec 16 08:34:09.856: RADIUS: State [24] 40
Dec 16 08:34:09.856: RADIUS: 52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 41 [ReauthSession:0A]
Dec 16 08:34:09.856: RADIUS: 30 41 35 31 30 41 30 30 30 30 30 31 31 45 33 33 [0A510A0000011E33]
Dec 16 08:34:09.856: RADIUS: 32 39 41 45 31 45 [ 29AE1E]
Dec 16 08:34:09.856: RADIUS: Class [25] 54
Dec 16 08:34:09.856: RADIUS: 43 41 43 53 3A 30 41 30 41 35 31 30 41 30 30 30 [CACS:0A0A510A000]
Dec 16 08:34:09.859: RADIUS: 30 30 31 31 45 33 33 32 39 41 45 31 45 3A 6D 65 [0011E3329AE1E:me]
Dec 16 08:34:09.859: RADIUS: 67 61 74 72 6F 6E 2F 32 30 37 35 39 38 39 38 34 [gatron/207598984]
Dec 16 08:34:09.859: RADIUS: 2F 34 31 30 [ /410]
Dec 16 08:34:09.859: RADIUS: Message-Authenticato[80] 18
Dec 16 08:34:09.859: RADIUS: 51 E9 8C 07 61 A4 F0 02 0C DC DF 1F 25 BE 39 A3 [ Qa?9]
Dec 16 08:34:09.859: RADIUS: Vendor, Cisco [26] 34
Dec 16 08:34:09.859: RADIUS: Cisco AVpair [1] 28 "device-traffic-class=voice"
Dec 16 08:34:09.859: RADIUS: Vendor, Cisco [26] 75
Dec 16 08:34:09.859: RADIUS: Cisco AVpair [1] 69 "ACS:CiscoSecure-Defined-ACL=#ACSACL#-IP-PERMIT_ALL_TRAFFIC-537cb1d6"
Dec 16 08:34:09.859: RADIUS: Vendor, Cisco [26] 28
Dec 16 08:34:09.859: RADIUS: Cisco AVpair [1] 22 "profile-name=Unknown"
Dec 16 08:34:09.859: RADIUS(0000025F): Received from id 1645/198
Dec 16 08:34:09.859: RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNORE
Dec 16 08:34:09.859: %MAB-5-SUCCESS: Authentication successful for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID 0A0A510A0000011E3329AE1E
Dec 16 08:34:09.863: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID 0A0A510A0000011E3329AE1E
Dec 16 08:34:09.894: RADIUS/ENCODE(00000000):Orig. component type = Invalid
Dec 16 08:34:09.894: RADIUS(00000000): Config NAS IP: 0.0.0.0
Dec 16 08:34:09.898: RADIUS(00000000): sending
Dec 16 08:34:09.957: RADIUS/ENCODE: Best Local IP-Address 10.10.81.10 for Radius-Server 10.1.30.11
Dec 16 08:34:09.957: RADIUS(00000000): Sending a IPv4 Radius Packet
Dec 16 08:34:09.957: RADIUS(00000000): Send Access-Request to 10.1.30.11:1812 id 1645/199,len 147
Dec 16 08:34:09.957: RADIUS: authenticator 1B D7 D2 13 EF 69 36 E2 - 87 4D A9 69 2A F7 29 4D
Dec 16 08:34:09.957: RADIUS: NAS-IP-Address [4] 6 10.10.81.10
Dec 16 08:34:09.957: RADIUS: User-Name [1] 41 "#ACSACL#-IP-PERMIT_ALL_TRAFFIC-537cb1d6"
Dec 16 08:34:09.957: RADIUS: Vendor, Cisco [26] 32
Dec 16 08:34:09.957: RADIUS: Cisco AVpair [1] 26 "aaa:service=ip_admission"
Dec 16 08:34:09.961: RADIUS: Vendor, Cisco [26] 30
Dec 16 08:34:09.961: RADIUS: Cisco AVpair [1] 24 "aaa:event=acl-download"
Dec 16 08:34:09.961: RADIUS: Message-Authenticato[80] 18
Dec 16 08:34:09.961: RADIUS: E7 15 BB FB 7B 5B 1A C4 50 FC E7 0E 10 AC 22 36 [ {[P"6]
Dec 16 08:34:09.961: RADIUS(00000000): Started 5 sec timeout
Dec 16 08:34:09.968: RADIUS: Received from id 1645/199 10.1.30.11:1812, Access-Accept, len 209
Dec 16 08:34:09.968: RADIUS: authenticator FA 03 DD C1 D2 87 6B 58 - 99 65 EE 96 FF D5 76 FD
Dec 16 08:34:09.968: RADIUS: User-Name [1] 41 "#ACSACL#-IP-PERMIT_ALL_TRAFFIC-537cb1d6"
Dec 16 08:34:09.968: RADIUS: State [24] 40
Dec 16 08:34:09.968: RADIUS: 52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 61 [ReauthSession:0a]
Dec 16 08:34:09.971: RADIUS: 30 31 31 65 30 62 30 30 30 30 30 30 37 38 35 34 [011e0b0000007854]
Dec 16 08:34:09.971: RADIUS: 38 46 45 45 38 31 [ 8FEE81]
Dec 16 08:34:09.971: RADIUS: Class [25] 54
Dec 16 08:34:09.971: RADIUS: 43 41 43 53 3A 30 61 30 31 31 65 30 62 30 30 30 [CACS:0a011e0b000]
Dec 16 08:34:09.971: RADIUS: 30 30 30 37 38 35 34 38 46 45 45 38 31 3A 6D 65 [00078548FEE81:me]
Dec 16 08:34:09.971: RADIUS: 67 61 74 72 6F 6E 2F 32 30 37 35 39 38 39 38 34 [gatron/207598984]
Dec 16 08:34:09.971: RADIUS: 2F 34 31 31 [ /411]
Dec 16 08:34:09.971: RADIUS: Message-Authenticato[80] 18
Dec 16 08:34:09.971: RADIUS: A4 02 84 1E 1A 97 E9 E9 DE 46 93 D6 30 C4 52 99 [ F0R]
Dec 16 08:34:09.971: RADIUS: Vendor, Cisco [26] 36
Dec 16 08:34:09.971: RADIUS: Cisco AVpair [1] 30 "ip:inacl#1=permit ip any any"
Dec 16 08:34:09.971: RADIUS(00000000): Received from id 1645/199
Dec 16 08:34:10.069: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID 0A0A510A0000011E3329AE1E
Dec 16 08:34:10.069: RADIUS/ENCODE(0000025F):Orig. component type = Dot1X
Dec 16 08:34:10.069: RADIUS(0000025F): Config NAS IP: 0.0.0.0
Dec 16 08:34:10.069: RADIUS(0000025F): Config NAS IPv6: ::
Dec 16 08:34:10.073: RADIUS(0000025F): sending
Dec 16 08:34:10.073: RADIUS/ENCODE: Best Local IP-Address 10.10.81.10 for Radius-Server 10.1.30.11
Dec 16 08:34:10.073: RADIUS(0000025F): Sending a IPv4 Radius Packet
Dec 16 08:34:10.073: RADIUS(0000025F): Send Accounting-Request to 10.1.30.11:1813 id 1646/240,len 423
Dec 16 08:34:10.073: RADIUS: authenticator 6C 75 45 C7 B7 66 2F 4D - 04 01 C6 CE A5 16 68 9B
Dec 16 08:34:10.073: RADIUS: Acct-Session-Id [44] 10 "00000255"
Dec 16 08:34:10.073: RADIUS: Calling-Station-Id [31] 19 "00-80-9F-C8-A9-EB"
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 49
Dec 16 08:34:10.073: RADIUS: Cisco AVpair [1] 43 "audit-session-id=0A0A510A0000011E3329AE1E"
Dec 16 08:34:10.073: RADIUS: Framed-IP-Address [8] 6 10.10.78.250
Dec 16 08:34:10.073: RADIUS: User-Name [1] 14 "00809fc8a9eb"
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 32
Dec 16 08:34:10.073: RADIUS: Cisco AVpair [1] 26 "connect-progress=Call Up"
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 21
Dec 16 08:34:10.073: RADIUS: Cisco AVpair [1] 15 "lldp-tlv= "
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 25
Dec 16 08:34:10.073: RADIUS: Cisco AVpair [1] 19 "lldp-tlv= "
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 23
Dec 16 08:34:10.073: RADIUS: Cisco AVpair [1] 17 "lldp-tlv= "
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 28
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 28
Dec 16 08:34:10.073: RADIUS: Tunnel-Packets-Lost [86] 101 1852075890
Dec 16 08:34:10.076: RADIUS: Nas-Identifier [32] 32 "
Dec 16 08:34:10"
Dec 16 08:34:10.076: data_left 15
2960-09#
Dec 16 08:34:10.076: RADIUS(0000025F): Started 5 sec timeout
Dec 16 08:34:10.090: RADIUS: Received from id 1646/240 10.1.30.11:1813, Accounting-response, len 20
Dec 16 08:34:10.090: RADIUS: authenticator 91 9F CE 71 1C 4B 45 93 - 49 86 52 C8 C3 44 40 B8
2960-09#
Dec 16 08:34:11.485: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/11, changed state to up
Dec 16 08:34:12.485: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/11, changed state to up
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#sh auth
2960-09#sh authentication ses
2960-09#sh authentication sessions int gi
2960-09#sh authentication sessions int gigabitEthernet 1/ /0/11
Interface: GigabitEthernet1/0/11
MAC Address: 0080.9fc8.a9eb
IP Address: 10.10.78.250
User-Name: 00809fc8a9eb
Status: Authz Success
Domain: VOICE
Oper host mode: multi-auth
Oper control dir: both
Authorized By: Authentication Server
ACS ACL: xACSACLx-IP-PERMIT_ALL_TRAFFIC-537cb1d6
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 0A0A510A0000011E3329AE1E
Acct Session ID: 0x00000255
Handle: 0x3600011F
Runnable methods list:
Method State
mab Authc Success
dot1x Not run
2960-09# -
Am in a foreign country and have been usingMessages to connect with those back home. Is it possible to use this in Apertuure so that I can send pictures too?
Have you tried dragging an Image (or Images) from the Aperture Browser and dropping in the Messages compose field? Works for me.
This sends (afaik) a reduced copy of the Preview. If you want to send a full-size file, you much first create it by exporting from Aperture. Sending files via Messages is covered in Messaging Help. -
How do I change my phone number on my Apple ID account? Not the number for billing. I got a new Ipod touch and when I was setting it up my emails where correct but the phone number was wrong. The gentlemen at the Apple Store told me just to go on my account on my computer and change it but i cant find where. Only part i know how to change is the billing number. Thanks.
If you can remember them their current answers you can login here and change them : https://appleid.apple.com , click on 'Manage your Apple ID' and then 'Password and Security' on the left-hand side of your account's page
If you can't remember their answers and you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if the instructions on this user tip helps you get them reset : https://discussions.apple.com/docs/DOC-4551 -
Does "Messages" in OSX 10.8.2 work cross platform? My daughter has an android phone and I can text with her OK in iOS. However, her texts don't show up on OSX whereas texts from my son, who has an iPhone, work in iOS and OSX.
HI,
The answer is yes and no.
As Barney-15E link says you can get the Messages app to SMS to AIM Buddies. Or rather telephone Numbers as AIM Buddies.
There are limits.
The computer has to be set as if in the United States (System Preferences > Language and Text > Region)
The phone is question has to be on a carrier that supports AIM SMS forwarding which only applies to some US based carriers.
The reason the SMS Messages arriving on the iPhone do not sync is that they are not iMessages (the "No" Part).
I use Messages with the Buddy List Showing.
As a test I have added a made up number as a Buddy and also created a Address Card for it.
So Mousing over the "Buddy" reveal the "Screen Name" which is the phone Number
You have to include the Leading +1 country code as well.
9:32 PM Thursday; March 14, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
HT1311 tried to use messages but it does not accept my apple id
Tried to use messages with get started but it would not accept my apple id
I'm guessing it needs a password to update your system - that is, the administrator password. Most software needs this when you install it.
This is the password you (or someone) chose when you first switched on your computer. -
I keep getting the "Something went wrong" message on my Droid Razr HD also. I looked in my Settings, and I don't have a Cloud app - I have a Cloud Print app with nothing cached. This is making it nearly impossible to use the phone - please help! So far, this website has only made things more difficult.
The details you're providing are very helpful, Maj_Dad. With airplane mode enabled,
there would be no message because that disables celluar data. I would recommend
tying that mode with WiFi to see if it still happens. It sounds like this issue
has something to do with one of the applications on the device.
JoeL_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".
Right click on your device icon on the left pane of iTunes and click on transfer pur....
-
I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account. -
How to use BAM to start an XI message with multiple occorrences
Hi:
I am trying to use BAM to send some data to XI. It is working fine when I have a message that has only header information. I am able to do the binding and the message is being sent properly.
The problem is when I have a XI message with multiple occurrences. This message creates a complex proxy structure like the sample bellow:
-ZTSTPROXY (Header)
-Header_Field1
-Header_Field2
-Occurrences (Items)
-Item_Field1
-Item_Field2
It is possible to pass data the he Header fields separately on BAM, but I have no access to the line fields on BAM binding screen (it shows me only the name Occurrence but no field).
So, I assumed that I have to pass the whole structure, not the fields separately. Then I tried to create a method on my Business Object that will return the same structure as my proxy, but this field cannot be used on BOR. I am receiving the message OL403 (Data Type cannot be used for methods).
Ok, I would not give up. I tried to use an Abap Class instead of a Business Object. By using the class I can define an attribute with the same data type generated by the proxy and it is possible to do the bind on BAM (directly to the output field, not to the specific fields on the structure).
But, when I raised the event, the message created on XI is empty. Only part of the tags were there and no field values.
Debugging on the event, I found that the problem is when it is trying to assign the container element on the method EVAL_ABAP_ASSIGN_CODE on the class CL_SWF_EXP_EXPRESSION. The program is raising the exception CX_SWF_EXP_DYN_ASSGIN_FAILED. Probably because the proxy structure is not allowed on the container.
Has anybody tried to pass a multi-line element to an XI message through BAM? How can this be done (if possible)?
Best Regards,
Flavio.Hi,
why don't you use an internal list for your question if you are from Oracle? JDeveloper 11 and OC4J11 related questions for the public technology preview have their own forum:
JDeveloper and OC4J 11g Technology Preview
My suggestion is to get in contact with the BAM group internally to ask for documents.
Frank -
How do I use tether with droid ultra, keep getting message to call verizon. Do Verizon charge or have to somehow change my account?
Verizon Wireless Customer Support wrote:
Hi there JByrd,
Let's take a closer look into this. What plan are you currently on? If you are on the More Everything plan, then you shouldn't have to do anything additional. If you are on the Nationwide plan it is an additional $20 a month for 2 GB of data. Let us know what plan you have. Thanks!
ErinW_VZW
Follow us on Twitter @VZWSupport
Hey Erin how about you confirm to Elector and others that you HAVE to pay for tethering on Nationwide plans and that if you are using a 3rd tethering app to bypass paying you are violating the terms of service. They don't seem to believe me. -
Is there a way to send a message with a photo attached using imessages. I am not able to send a photo to one of my contacts because I am sending the contact a message text messages. I don't want to send contacts text messages. I want to send them iMessages.
Kolyei, sorry for the late reply.
Have your brother create a contact in his phone for himself. Inside his own contact, have him add his phone number and his iCloud address.
Settings > Messages > Send & Receive Have your brother select both his phone number and email addresses where he would like to receive iMessages. -
when i send a text message with my new iphone 5 to my wife who is now using my old Iphone 4 we both receive the message. How is this possible? Also she receives all text messages sent to me. She obviously has a different phone number and a different provider
See here to create a new apple ID
http://support.apple.com/kb/HE37
good luck
Maybe you are looking for
-
ITunes tells me my iPad is synced to a different library. It's not.
We bought a new iPad Air and immediately synced it to our iTunes library, hand choosing 3000 songs. I went back later to add some books, and iTunes tells me that the device is synced to a different library (it's not, same library) and that to sync bo
-
Problem displaying PDF file in new window.
Using NetBeans 6.5, Internet Explorer 7. I am using the code example from BalusC at the site: http://balusc.blogspot.com/2006/05/pdf-handling.html I am having no problem reading and displaying the PDF file, but it displays it in the same window, not
-
what can icloud be used for
-
While signing into a web page it does not open up. The webpage owner says its a ios7 problem.
-
Restricting use of iHTML or Insight Plug-in by users?
Hi, Is it possible in Hyperion System 9 release 9.3.1 to restrict at the user/group level which users get iHTML or IR plug-in (Insight)? Is there a way to enable or disable the install/use of these products at the user/group level? regards H