Improper index display in RH Server on Firefox, Chrome

I'm running into something where the index of my Webhelp Pro output displays incorrectly in Firefox (using 3.6.14) when the output is hosted on RH Server. The same help accessed locally looks just fine. In addition, the help looks fine both locally and remote when viewed in IE8. I run into the same problem on Chrome (13.0.782.112) as on Firefox.
Using RH Server 9 and TCS 3.
What it should look like:
The incorrect display:
For any index entry that has more than one topic associated with it, the topics themselves are displayed as links within the index.
Any ideas would be greatly appreciated.

Hi there
From what I'm seeing it appears the help is "falling back" and downgrading to "Pure HTML" where everything is a link.
Have you perhaps disabled JavaScript in Firefox or maybe have some add-ins that are conflicting? I think I'd be investigating your Firefox settings and try disabling any add-ins.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Similar Messages

Outlook 2010 "Your automatic reply settings cannot be displayed because the server is unavailable" error

Hi,
We recently introduced a Exchange 2010 server into our Exchange 2003 enviroment but had to stop migrating users over to it after it became appartent that users using Outlook 2010 could not switch on their Out Of Office, getting an "Your automatic reply settings
cannot be displayed because the server is currently unavailable" error. However users on the new 2010 can set OOF if they use OWA or Outlook 2003!
Running the Test E-mail AutoConfiguration shows no errors with the Log tab showing Autodiscover succeeded and the Results tab showing all the correct values, including a OOF URL of
/Autodiscover/Autodiscover.xml">https://<servername>/Autodiscover/Autodiscover.xml into IE gives a XML file with a 600 error code.
I have looked at loads of 'solutions' on the Internet but cannot get this working, anyone have any suggestions?
Thank you,
Craig

Please verify IIS
settings:
======================
On Exchange CAS
server, open IIS console,
Go to default web site, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click Autodiscover, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click EWS, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click OAB, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Please run IISRESET command to load the changes.
Thanks.
Tony Chen
TechNet Community Support

Out of Office error: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.'

Hi,
This is my first post in the forums. Please forgive me if it's in the wrong category or if it's not posted correctly in any way.
I'll try and give you below as much information about the problem we have here as I can.
What we have:
- an on-premises Windows 2012 Standard server that is the PDC, DNS and DHCP server;
- a second Windows 2012 Standard server with the sole purpose of hosting our Exchange 2013 CU7 server;
- Windows 7 PCs with Office Home and Business 2010 v.14.0.7143.5000 (32-bit);
- Outlook 2010 connects through Outlook Anywhere (mail.ourdomain.com).
The problem:
If trying to set up Out of Office through Outlook on the client PCs, we'd get an error message: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.' Interestingly, it does work normally for some users.
It works fine for all users if done through OWA.
Tests performed:
User 1 on PC1 has the problem. User 2 on PC2 doesn't have the problem. Both users are members of the same security groups.
- setting up User 2 on PC 1: the problem exists;
- setting up User 1 on PC 2: the problem exists;
- setting up a second Outlook profile on PC2 within User 2's domain account (the one that works), for the same User 2: the problem still exists!
I haven't been able to set up an Outlook account that works since this issue was discovered, although there are existing Outlook accounts that do not have the issue.
Let me also point out we have another issue we are working on and which may or may not be related: the Autodiscover function in Outlook doesn't work. Test E-mail AutoConfiguration results in 'Autoconfiguration was unable to determine your settings!'.
I can see postings in the Internet of other people having the same problem with OoO, but couldn't see a solution that fits my case: some existing accounts in Outlook are fine, other are not and newly created profiles of aforementioned working accounts do not
work. The majority of the articles/threads I read suggest recreating the Virtual Directories in Exchange, but we did that just a month ago (when troubleshooting the Autodiscover problem) and besides if the problem is in the Virtual Directories, I would expect
it to affect all accounts.
Any help in resolving this problem would be greatly appreciated. Please let me know if you need other details.
Apologies if the posting is not in the right place or not done properly - I'm still learning.

The IIS log files on the CAS might tell you something. Depending on how your proxy server handles NAT the IP address of your connection might be from the proxy server instead of your client.
In any case, a tool like Fiddler (http://www.telerik.com/fiddler) can be extremely helpful in working on problems like this because it can decode the SSL traffic on the client and you can see what's being sent
and what's being received.
Another thing to check (although it's unlikely to be your case) is whether or not your browser (when you try connecting to the autodiscover URL) thinks it's in the "Internet" zone. the "Local intranet", or at a "Trusted" site.
The domain names you use on machines on your LAN should be excluded from being proxyed. Anything with "." in the name will be set, unless excluded, to the proxy server.
Is the time correct on the client machine? Is it more than 5 minutes different to the Exchange machines and domain controllers? That'd be something that would cause Kerberos to fail.
A certificate can be a problem if its expired or if it doesn't have the correct names. But I wouldn't worry about the uglog.com domain just yet. Until you get the Autodiscover working with the SCP you have bigger problems.
If you've never used a WPAD file then don't worry about it. It's very useful if you have a complex network and you want to manage how browsers connect to servers. For example, if you have multiple proxy servers the each manage a different set of names, an/or
if some names should bypass proxy servers entirely and just connect directly. If run a strictly Microsoft network with only Microsoft product that you can manage with GPOs (and you can enforce those GPOs on every machine -- even the BYOD ones) you probably
don't need a WPAD.
--- Rich Matheisen MCSE&I, Exchange MVP

Outlook 2013: Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable

When I configure the Outlook profile manually then receive warning "Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable" when clicking "Automatic Replies (Out of Office)".
However if I use Autodiscover to configure the Outlook profile the above does not occur and "Automatic Replies (Out of Office)" works fine.
Client: Outlook 2013 Click-to-Run version 15.0.4551.1011 on Windows 7 Pro SP1.
Server: Exchange 2007 SP3 on Windows SBS 2008 SP2.

Hi,
First of all, please make sure you have installed this Outlook 2013 hotfix package (December 10, 2013):
http://support.microsoft.com/kb/2825652/en-us
It may fix the issue.
If the hotfix doesn't help, please note, this problem can occur after your primary SMTP address changes. The problem occurs because your previous primary SMTP address is cached in the Windows registry under your Outlook profile and this information does
not get refreshed for 24-48 hours after the SMTP address change.
So please make sure you have configured smtp address correctly, or, we can find some workarounds from the link below:
http://support.microsoft.com/kb/2693800/en-us
Regards,
Melon Chen
TechNet Community Support

Exchange 2007 / Outlook 2013 "Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable"

One of our users is having problems setting replies from Outlook on his local PC. This is an SBS 2008 Server with Exchange 2007. The client PC is running Windows 8 with Outlook 2013. This issue doesn't seem to affect other users but this
is the only client with Outlook 2013.
When trying to set an automatic reply from within Outlook 2013 we get the "Your automatic reply settings cannot be displayed because the server is unavailable". Outlook seems to be connecting and working fine so connection to the server does
exist.
Trying this same operation from owa works without issue. Please let me know what we need to do to find a solution.
Thanks so much!

Problem:
IMAP downloads inbox don't work after November patches.
If you install a fresh OS and O2K13 unpatched ,the IMAP works fine.
Fully patched O2K10 works fine too.
It worked for my customer until November patch Tuesday broke the IMAP sync.
Consultant opened case.
Response from Microsoft:
        This is with regards to the issue faced by you due to regression         caused by November security update. This is further to inform         you
that fix is out and below is the download links for 32 bit         and 64 bit of the office suites. You need to apply all 3 hotfix.         The crash issue and IMAP issue would get resolved
immediately         while the issue related to Free / Busy and OOF not getting set         would take 24-36 hours to start working once the patch is
applied.
Below
        are the KB articles:
Description
        of the Outlook 2013 hotfix package (Outlook-x-none.msp):         December 10, 2013:
http://support.microsoft.com/kb/2825652
Description
        of the Word 2013 hotfix package (Word-x-none.msp): December 10,         2013:
http://support.microsoft.com/kb/2837674
Description
        of the Office 2013 hotfix package (       2013:
http://support.microsoft.com/kb/2849994
    Description of the Office 2013 hotfix package (   December 10, 2013:
    http://support.microsoft.com/kb/2849994
Issues that this hotfix package fixes
Consider the following scenario:
You have a SharePoint Server environment that has complex             workflows.
You implement the ReceiveTimeOut registry entry to             increase the global timeout to 90 seconds.
You click Open this task             button to open a workflow task in Outlook 2013.
        In this scenario, when you click any approval option from the         popup dialog box, you receive the following error message:
This task could not be updated at this               time.
When you reply or forward an email message by using inline         replies, you cannot use the Close and Delete method of Outlook         Visual Basic for Application. Additionally, you
receive the         following error message:
Run-time error '-2147467259               (80004005)': This method can't be used with an inline               response mail
item.
Consider the following scenario:
Assume that User A is located on an on-premises Exchange             Server, and User B is located on Cloud.
Both the on-premises Exchange Server and the Cloud enables             the Federation Trust.
User A share his own calendar to User B with Full Details             permission, and send the sharing invitation to User B.
User B opens the sharing invitation from User A, click             Open this Calendar, Outlook browses to the Calendar module             and opens
the shared calendar.
        In this scenario, the shared calendar does not show any content.
Consider the following scenario:
You install Outlook 2013 on Windows Server 2008 R2 or             Windows Server 2012 with Terminal Server Role installed.
You implement the Use Cached Exchange Mode for new and             Existing Outlook Profiles Group Policy settings and enable             it.
        In this scenario, when you open the           Outlook Account Settings window, and double-click the         Exchange
account, the Use Cached           Exchange Mode check box is not checked in the popup         dialog box.
Consider the following scenario:
You have an Exchange Server that has Public Folders.
You create the Outlook Security               Settings folder under
All               Public Folders.
You publish the AdminSecurityMode registry entry and set             to a value of 1.
You configure Outlook 2013 to use cached mode.
        In this scenario, when Outlook 2013 connects to Exchange Server,         Outlook crashes.
    Description of the Word 2013 hotfix package (Word-x-none.msp):     December 10, 2013:
    http://support.microsoft.com/kb/2837674
    Assume that you open a meeting request in a separate window in     Outlook 2013. When you click
Accept and     then click
Send Reply Now,     Outlook crashes.
    Description of the Outlook 2013 hotfix package (Outlook-x-none.msp):     December 10, 2013:
    http://support.microsoft.com/kb/2825652
Issues that this hotfix package fixes
Assume that you have a recurring appointment that does not         have a subject. You make some changes to one instance of the         appointment and then save the instance. When you
try to open or         delete the instance, Outlook may crash. Additionally, when you         drag-and-drop one instance of the appointment to a different
time in the calendar, Outlook may crash.
When you reply or forward an email message by using inline         replies, you cannot use the Close and Delete method of Outlook         Visual Basic for Application. Additionally, you
receive the         following error message:
Run-time error '-2147467259               (80004005)': This method can't be used with an inline               response mail
item.
Consider the following scenario:
Assume that User A has a mailbox that is located on an             on-premises Exchange Server, and User B has a mailbox that             is located
on Cloud.
Both the on-premises Exchange Server and the Cloud enable             the federation trust.
User A share his own calendar to User B with Full Details             permission, and send the sharing invitation to User B.
User B opens the sharing invitation from User A, click             Open this Calendar, Outlook browses to the Calendar module             and opens
the shared calendar.
        In this scenario, the shared calendar does not show any content.
Consider the following scenario:
You install Outlook 2013 on Windows Server 2008 R2 or             Windows Server 2012 with Terminal Server Role installed.
You implement the Use Cached               Exchange Mode for new and Existing Outlook Profiles             Group Policy
settings and enable it.
        In this scenario, when you open the           Outlook Account Settings window, and double-click the         Exchange
account, the Use Cached           Exchange Mode check box is not checked in the popup         dialog box.
Consider the following scenario:
You have an Exchange Server that has Public Folders.
You create the Outlook Security               Settings folder under
All               Public Folders.
You publish the AdminSecurityMode
registry entry and set to a value of 1.
You configure Outlook 2013 to use cached mode.
        In this scenario, when Outlook 2013 connects to Exchange Server,         Outlook crashes.
Consider the following scenario:
You have two Active Directory forests (Forest A and Forest             B).
User A and User B have their mailboxes that are located on             Forest A.
User A share his own calendar with User B with Full             Details permission.
User B add the shared calendar and let it sync.
You move User B’s mailbox to Forest B.
        In this scenario, the shared data in the shared calendar is         removed every second time that User A restarts Outlook. And it         is re-synced
when User A browses to the Calendar module.
Unfortunately TechNet isn't coming back, sorry folks :-(
The 3 patches above immediately fixed the issue for me!
Thanks so much!

Thumbnails are not displayed correctly in Firefox, but displayed correctly in Safari and G. Chrome

Firefox display problems regarding this customers site:
http://gardenia.dk/collections/collection/
Thumbnails are not displayed correctly in Firefox - only a tiny bit of the picture is visible, incorrect scale (displayed correctly in Safari and Google Chrome).
Can I do anything to make it work in Firefox, too?
Kind regards,
Annette

This article might help you-
https://support.mozilla.org/en-US/kb/websites-look-wrong-or-appear-differently

Fonts Do Not Display Correctly in Safari and Firefox

Certain fonts do not display smoothly in Safari and Firefox. They appear to have little pieces of the letters missing. I'm sure others have experienced this problem before but I could not find how to fix this. On the Apple Discussions the fonts look fine... on Google for example, they look messed up. I do not know specifically which font(s) are displayed weird but it happens frequently. This happens in Safari and Firefox on my MacPro and MacBookPro. Is there a setting to fix this?
Thanks,
-flash

Hello Flash, welcome to Apple discussions; )
Look for Helvetica Fractions and Times Phonetic Fonts, if you have them,
they can be the usual suspects.
Check the Text encoding in both Safari & FF, under the "View" menu.
In System preferences-> Personal (top section) in Appearance tab->
on the last portion of the panel Font smoothing Style: set that to Automatic
If those don't help, see this users tip excellent article Kurt Lang's ~ Font Management in Mac OS X
Look into this application to find any corrupt font[s]Font Finagler
Good luck, let us know how you fare.
Eme'~{)
edited by: Eme

How do I set up a custom (local) Sync server for Firefox 4?

I am having difficulty finding a clear set of instructions on how to set up a custom Sync server for Firefox 4. Most of the information that I can find seems outdated (only mentioning Weave and/or previous versions of Firefox).

The URL you are looking for is https://wiki.mozilla.org/Labs/Weave/Sync/1.1/Setup

Indexing Schedule Manager on Server Failed!!!

Hi All,
Below is the error message from the ULS logs regarding the Indexing service. As a result of this, I'm unable to see the Content Sources and Crawl History on Central Admin. I further found out that one of the server in our farm is in Converging Status under
NLB (Network Load Balancer). Could this be the issue? But why would it say access denied. The search service account has not been modified or the permissions have never changed. Thanks in advance for any pointers.
Entering monitored scope (Timer Job Indexing Schedule Manager on WCRSPT02) 8a76f83b-9c75-48d4-8764-61fb0d93ca49
executing job Indexing Schedule Manager on <Server> 8a76f83b-9c75-48d4-8764-61fb0d93ca49
CContentSourceCollection::ValidateTrigger in m_pScheduler -> Activate or NewWorkItem, Error is 0x80070005 [contentsource.cxx:1126] d:\office\source\search\native\gather\server\contentsource.cxx
<Exception><HR>0x80070005</HR><eip>000007FEE2929257</eip><module>d:\office\source\search\native\gather\server\contentsource.cxx</module><line>1127</line></Exception>
The Execute method of job definition Microsoft.Office.Server.Search.Administration.IndexingScheduleJobDefinition (ID 0141a0f4-9c0a-4aa3-901f-f0bd5bb7f51d) threw an exception. More information is included below. Access is denied. (Exception from HRESULT:
0x80070005 (E_ACCESSDENIED)) 8a76f83b-9c75-48d4-8764-61fb0d93ca49
Exception stack trace: at Microsoft.Office.Server.Search.Administration.SearchApi.RunOnServer[T](CodeToRun`1 remoteCode, CodeToRun`1 localCode, Boolean useCurrentSecurityContext, Int32 versionIn) at Microsoft.Office.Server.Search.Administration.SearchApi.GetContentSources(Int32
versionIn) at Microsoft.Office.Server.Search.Administration.ContentSourceCollection..ctor(Content parent) at Microsoft.Office.Server.Search.Administration.Content.get_ContentSources()
at Microsoft.Office.Server.Search.Administration.IndexingScheduleJobDefinition.Execute(Guid targetInstanceId) at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean
isTimerService, Int32& result) 8a76f83b-9c75-48d4-8764-61fb0d93ca49
Leaving Monitored Scope (Timer Job Indexing Schedule Manager on WCRSPT02). Execution Time=50.1862666903196
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

Hi,
According to your post, my understanding is that Indexing Schedule Manager on Server Failed.
I recommend to reset Index and have a full Crawl. Please refer to:
Unable to view content sources or crawl history in Search server 2010 Central Administration: share point
You need to check whether you have an additional Search Service Application and is stuck in an error state. If so, please run the configuration wizard to remove the previously mentioned Search Service Application that was corrupted.
In addition, please follow the instructions to check whether it works:
stsadm -o osearch -action stop
stsadm -o osearch -action start -role index
Open Central Admin - select your SSP
Check / validate your search service configuration.
Here are some similar articles for your reference:
http://social.technet.microsoft.com/Forums/en-US/a2f749bf-5d8b-4c0e-8fdd-464bd21d0e0a/indexing-schedule-manager-failing?forum=sharepointadminprevious
http://bruteforcesharepoint.blogspot.com/2009/04/event-log-errors-6481-and-6398.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does nog display my name or e mail address. This only since upgrading my iPhone5 to iOS7

When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does not display my name or e mail address. This only since upgrading my iPhone5 to iOS7. I've checked all settings etc. anyone have a solution please?

Rectory wrote:
Please can someone tell me how I can change this so when I send a mail from my phone and from the IPad that it reads from me.
You need a separate email address but you've already ruled out that solution.

Facebook social plugin of fan page feed not displaying correctly after upgrading to Firefox 17

Facebook fan page feed not displaying correctly since upgrading to Firefox 17. Code hasn't changed, and it still displays correctly in Internet Explorer. In Firefox 17, the background has gone grey so that the text is no longer visible, and photos of fans are no longer displayed at the bottom. (Issues occur on both my Dell PC/Windows Vista and my MacBook Pro.) Please advise.
**Issue seems to have resolved itself; I guess plugin developers caught up with Firefox update.**

Facebook fan page feed not displaying correctly since upgrading to Firefox 17. Code hasn't changed, and it still displays correctly in Internet Explorer. In Firefox 17, the background has gone grey so that the text is no longer visible, and photos of fans are no longer displayed at the bottom. (Issues occur on both my Dell PC/Windows Vista and my MacBook Pro.) Please advise.
**Issue seems to have resolved itself; I guess plugin developers caught up with Firefox update.**

Indexing .cfm files using Indexing Service on windows server 2008 and IIS 7.0

Hi All,
Anyone knows why .cfm files would not get indexed by Indexing Service on windows server 2008 and IIS 7.0. This is a coldfusion website using Indexing Service for site search. There are a lot of cfm pages indexed as unknown files. Any clues on how this can be fixed?
Thanks!

You might try editing your registry so that *.cfm, *.cfc, and other ColdFusion related files are treated as text files by the Windows search feature. See link below.
http://www.dougknox.com/xp/tips/xp_bad_search.htm
Disclaimer: I am not a Windows system admin. You might try posting this question to a Windows specific forum.

Refresh Display vs Reload Server Metadata

Hi Gurus,
can any one let me know what is the significance of having "Refresh Display" and "Reload Server Metadata" in answers selection pain. For example if i have changed the name of column in the symantic layer. Now if i hit "Reload Server Metadata" only then the new name is getting reflected, i m unable to get for what reason or purpose "Refresh Display" is there. Reload Server Metadata itself refreshes the selection pane and clicking on "Refresh Display" the new name is not getting reflected.
So Please let me know the significance of "Refresh Display" link.
Thanks,
Sreekanth.

Hi Daan,
i am aware of the bookshelf definition, what i wanted to know was based on a scenario.
Suppose i changed a join in the RPD in online mode, to reflect the changes in answers, will i have to hit "Refresh Display" or "Reload Server Metadata"?
Suppose i changed the name of the presentation column in RPD in online mode, to reflect the changes in answers, will i have to hit "Refresh Display" or "Reload Server Metadata"
for this scenario the book shelf says "To refresh the *information* for saved requests, filters, briefing books, and dashboard *content*, click the Refresh Display link at the bottom of the selection pane" does this mean what ever i renamed after clicking "Refresh Display" they will get changed in the saved requests? I tried it but it is not changing
i want to know what INFORMATION as told in book shelf in saved requests / filters / briefing books will get changed after hitting "Refresh Display"
Thanks,
Sreekanth.

ICS 2: Can I change the format of the date displayed by Calendar Server from M/D/Y to D/M/Y using JavaScript?

Can I change the order in which the month and day are displayed in Calendar
Server using JavaScript? Specifically, I would like the date to be displayed
in the format D/M/Y instead of M/D/Y.

Yes. You can change the format of the date by editing the JavaScript variable
in the file 
loadpoint/CalendarServer/cal/uicust/en/main.html
. The variable is located in the
"Misc" section in the
following line: 

i18n['def date order'] = 'M/D/Y';

Edit the line as follows: 

i18n['def date order'] = 'D/M/Y';

Hello Mark,
yes, it is possible. In Calendar Express under
"Options | Settings -> Date"
"Show brief dates in the following order: Date, Month, Year".
BTW.: iCS 5.0 P4 is out since August, 2001. It's worth upgrading!
Regards,
Jakob.

Indexorg/Re Indexing jobs in Primary server which has Logshipping

Hi All,
I have primary server(SQLServer 2008 R2) with 200 Database and 90 databases are configured in Log shipping(stand by).
We are planning for Indexing jobs on primary server.
Please some body advise us best practices to implement indexing jobs in primary server.
Thanks in advance

There is few consideration
1. To rebuild index online or to rebuild offline. Online produces less logs than offline I proved this fact in below link. Online rebuild in Enterprise Only option
http://social.technet.microsoft.com/wiki/contents/articles/24420.curious-case-of-logging-in-online-and-offline-index-rebuild-in-full-recovery-model.aspx
Make sure your SQL server is patched to latest Service pack because Online index rebuild
MIGHT cause increase in database size after rebuild. Below is MS support article . This happens because extra 14 byte is added
http://support.microsoft.com/kb/2812884
2 You should only rebuild index whose fragmentation is > 40 and page_count is >1000 and reorganize if fragmentation is between 10 and 30 .
3. Are you using SORT_IN_TEMPDB option if yes make sure your tempdb has enough space if not make sure drive on which index resides has enough space.
4 Index rebuild is maintenance task so you also need to figure out how much time index rebuild would take. Ola script would surely be helpful if you use it.
5 Logs will be produced so you need to make sure just after rebuild when logs will be transferred to secondary the link must not be heavily utilized or else you will start receiving alerts from Log shipping
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Improper index display in RH Server on Firefox, Chrome

Similar Messages

Maybe you are looking for