Improve ControlExecFlow user subproperty documentation
The TestStand documentation describes the ControlExecFlow user subproperty as follows:
"User can control the flow of execution by setting breakpoints, single-stepping, and using the Set Next Step command. User can use the Run Mode command in a user interface. User can use the Run Mode command in the TestStand Sequence Editor but only if the EditSequenceFiles subproperty is also True."
This description should be amended to include the fact that the value of this subproperty also enables or disables options in run-time error dialogs (Retry, Ignore, Abort, and Break). TestStand users will see run-time error dialogs with different options based on the value of this subproperty.
NOTE: The ControlExecFlow user subproperty description can be found in the online help under NI TestStand Environment Reference Help>>TestStand Sequence Editor Menus, Panes, and Windows>>Windows>>User Manager Window>>User and Group Privileges.
We have two different types of support offerings for NetBeans and until recently, both included 'Standard Subscription' in their title and hence the possible miscommunication. One is for developer support in using the tool and the other is for production support.
I checked the queue for the developer support offering but did not find a match with your user name....please advise how your service request was submitted.
Similar Messages
-
HI
can anyone please share the user table documentation.
ThanksHi,
All Oracle E-Business Suite documentation can be found at [Applications Releases 11i and 12|http://www.oracle.com/technology/documentation/applications.html].
Oracle E-Business Suite objects are documented in [Applications Electronic Technical Reference Manuals (eTRM) |http://etrm.oracle.com].
Regards,
Hussein -
Power user training documentation in BEX
Could any one pls provide me the links or any pdfs for power user training documentation bex analyzer and web ex
regards
D
nullHi,
check the links below:
www.dop.wa.gov/NR/rdonlyres/ECD2A7F9-AC5A-4A31-856D-CA290DBD28CA/0/FINAL1BWIntroduction.pdf
www.dop.wa.gov/.../7CD23B94-FDAD-4307-BA6F-DA76D8481A54/0/FINAL_Demo3BWAddingConfidentialInfoObjects.pdf
Regards,
Aparna -
Revenue Recognition user-exit documentation
Hi SD Gurus,
Does anyone have any documentation on below mentioned user-exits for Revenue Recognition. For e.g. how they are used, scenarios, examples etc. would be of great help.
Event Description
00503101 Revenue realization: Copy conditions
00503102 Revenue realization: Start/end of selection period
00503103 Revenue realization: Determine selection period
00503104 Revenue realization: Billing u2013 FI document
00503105 Revenue realization: Forecast revenue lines
00503106 Revenue realization: Revenue amount adjustment
00503107 Revenue realization: Act determ.of non-billed rec.
00503108 Revenue realization: Display variants
00503109 Revenue realization: Enter split criterion
00503110 Revenue realization: Change accounting data
00503111 Revenue realization: Change document date/type
00503113 Revenue realization: Status change
00503114 Revenue realization: Additional Value / Quantity Fields
00503115 Revenue realization: Set Exchange Rate Date
00503116 Revenue realization: Compression Data SD/FI 0
Thank You.
Regards,
AmitHi,
check following link
http://****************/Tutorials/ExitsBADIs/ExitsMain.htm
Regards,
Madhu -
I am looking for some user documentation for iTunes (Mac) that is more comprehensive than the Apple tutorials. In particular, the user interface isn't always intuitive, and I keep coming across things that take a while to figure out.
For example, I am trying to put the movements of a classical work in order in the main window so that they will play in the right order; in spite of numbering the tracks in the Info window, it still doesn't happen, and I can't find a way to do this.
A previous discussion
https://discussions.apple.com/message/7234401#7234401
(now archived) gave a reference to an article
http://docs.info.apple.com/article.html?artnum=93078
which is now not available.
Does anybody know of anything current which could help?
Thanks.I find the iTunes Help accessed from the iTunes > Help menu to be really useful. You can browse the contents, or use the search bar at the top right to go right to what you want. For example, I searched for Edit song and CD information and found this:
To edit song or CD information:
Select the song or CD you want to edit, and choose File > Get Info (or press Command-I).
Click Info and make your changes.
Tip: If you’re changing the same information for multiple items (genre, for example), you can select all the items and change the information for all of them at the same time
Here are other ways to customize song and CD info:
You can edit information in the Info window to make it easier to find and sort items in your library. For example, you can:
Group individual movements on a classical CD into one work by indicating the movement (for example, “Piano concerto in A Minor, Op. 54”) in the Grouping field.
Group songs that are part of a compilation together in your library by clicking the Info button and selecting the “Part of a compilation” checkbox.
Identify the individual artists on a tribute album in the Artist field, and type “various” in the Album Artist field.
Create your own genre category by choosing Custom from the Genre pop-up menu.
Change the order in which tracks on a CD play by changing the numbers in the Track Number fields.
Try it. You'll find a lot of good tips.
There is also an excellent archive of 3rd party tutorials here: http://www.ilounge.com/index.php/articles/archives/tutorials -
User online documentation for calendar
I am looking for a quickguide for calendar web and for calendar pc client but cannot find any on otn.oracle.com...
I would also like the calendar web 3.1 online help for general users, which I see on many sites but would prefer to download from oracle itself.Hi Friend,
Continuing with previous post here...
Create a Push Button in application toolbar, check the function code in USER-COMMAND event.
There u write code to call function module DSYS_SHOW_FOR_F1HELP..
Pass DOKCLASS = RE
DOKLANGU = sy-langu
DOKNAME = 'Module pool name'
SHORT_TEXT = 'X'.
It will populate the documentation window.
Regards
Krishnendu -
I bought a 15" Macbook Pro nearing a year ago and I've regretted it since about after a week of owning it. It's on 5.1.7
The wifi is terrible. Drops out daily. When it does, it usually takes at least a good 5 minutes and moving it to another position for it to work again. Sometimes longer. Often it'll do it back to back all night. I wish I could leave it most of the time, but I bought it to use when I wish and to work on. I also have to be about 20 meters or closer to the router to even have a chance at a connection. This is not the case with the Windows laptop in the same house. I can no longer use a laptop at my desk because it is too far away (about 5 metres further than the area it sometimes works)!
Moved the router. Done all that nonsense. Still crap.
It also struggles when I have as little as both Illustator, Photoshop and Safari open. Literally going insane with it.
I am constantly looking up ways to fix it. This forum pops up on every search. What I don't understand is, SO many people have the same problem yet there seems to be no real solution. Does Apple ever answer? This forum seems to be pages and pages of the same problem with the same amount of 'help' from other members that in many cases either you have to be techy to understand what they are even talking about or they've tried it all and are left with the same problem anyway. Square 1.
- It should be noted that the inner workings of tech bores me to no end. I already know too much about it but I'm just not interested. If I was, I'd have went to uni and studied it. I just want something that I bought to function properly. Why hasn't there been a hardware update if this is a known hardware issue? etc etc etcYou have tried a different router or access point, correct?
You have updated the firmware on the router, correct?
You have tried different wireless security protocols on the router, correct?
You have taken it a Genius Bar, correct?
You have started from scratch and reinstalled a fresh system, correct?
What troubleshooting have you done besides move the router.
Does Apple ever answer?
No. These are user to user forums -
USER DEFINED F1 documentation for seelction screen fields.
I have one selection screen in my Program.
If I give F1 , It has to display user defined documentation.
like...I have customer field in selection screen.
Select-options:S_CUST for BSAD-KUNNR.
For this I need doc as "Enter customer number excluding from the Table"
Not the documentation of the KUNNR field.
How to do this.
Many Thanks!!!Hi
You can write what you want to dysplay your text. For example I created a document (type SIMG) by SO72 and this is the code to call it:
FORM MY_F1_FOR_S_CUST.
DATA: T_LINE LIKE TLINE OCCURS 0,
XHEAD LIKE THEAD,
HELP_INFO LIKE HELP_INFO,
TEXC LIKE SY-UCOMM OCCURS 0,
V_OBJECT LIKE DOKHL-OBJECT.
Costants
DATA: PREF_SIMG(4) VALUE 'SIMG',
DOCID_HY LIKE DOKHL-ID VALUE 'HY'.
Object name
CONCATENATE PREF_SIMG MY_OBJECT INTO V_OBJECT.
Get Text
CALL FUNCTION 'DOCU_GET_FOR_F1HELP'
EXPORTING
ID = DOCID_HY
LANGU = SY-LANGU
OBJECT = V_OBJECT
IMPORTING
HEAD = XHEAD
TABLES
LINE = T_LINE
EXCEPTIONS
RET_CODE = 1
OTHERS = 2.
CASE SY-SUBRC .
WHEN 0.
Dysplay text
GET CURSOR FIELD HELP_INFO-DYNPROFLD.
HELP_INFO-DOCUID = DOCID_HY.
HELP_INFO-DOCUOBJECT = V_OBJECT.
HELP_INFO-SPRAS = SY-LANGU.
HELP_INFO-PROGRAM = SY-REPID.
HELP_INFO-DYNPRO = SY-DYNNR.
HELP_INFO-DYNPPROG = SY-REPID.
HELP_INFO-PFKEY = SY-PFKEY.
HELP_INFO-FIELDNAME = HELP_INFO-DYNPROFLD.
CALL FUNCTION 'HELP_DOCULINES_SHOW'
EXPORTING
HELP_INFOS = HELP_INFO
OVERLAY_HEADER = XHEAD
TABLES
EXCLUDEFUN = TEXC
HELPLINES = T_LINE.
WHEN OTHERS. MESSAGE S720(SH).
ENDCASE.
ENDFORM.
Max
Message was edited by: max bianchi -
How can I improve the response time of the user interface?
I'm after some tips on how to improve the response time to mouse clicks on a VI front panel.
I have data acquistion application which used to run fine, but after spending a couple of weeks making a whole bunch of changes to it I find that the user interface has become a bit sluggish.
My main GUI VI has a while loop running 16 times a second, updating some waveform charts and polling about a dozen buttons on the front panel.
There is sometimes a delay (variable, but up to 2 seconds sometimes) from when I click on a button to when it becomes depressed. I have wired the iteration terminal of the while loop to an indicator on the front panel and can see that the while loop is ticking over during the delayed response to the mouse click, so I know that the problem is not that the whole program is running slow, just the response to mouse clicks.
Also, just for debugging purposes, I have indicators of the iterations of all the main while loops in my program on the front panel, so I can see that there are no loops running abnormally fast either.
One thing I've tried is to turn off multi-threading, and this does seem to work - the response to mouse clicks is much faster. However, it has the side effect of making the main GUI while loop run less evenly. I was trying to get a fairly smooth waveform scrolling across the screen, and when multi-threading is off it gets a bit jerky.
Any other suggestion welcome..
(I am using LabVIEW 7.1, Windows 2000).
Regards,
Mark.Hi Altenbach,
Thanks for your reply. In answer to your questions:
I am doing both DAQ board and serial data acquisition. I am using NIDAQ traditional for the DAQ board, and VISA for the serial. I have other similar versions of this program that do only DAQ board, or only serial, and these work fine. It was only when I combined them both into the same program that I ran into problems.
The multiple while loops are actually in separate VIs. I have one VI that acquires data from the DAQ card, another VI that acquires data from the serial port, another VI that processes the data and saves to file, and another VI, the GUI VI, that displays the data in graphs and charts. The data is transferred betwen the VIs via LV2 globals.
The GUI VI is a bit more complicated than I first mentioned. It has tab control, with 4 waveform charts on one page, 4 waveform graphs on another page, and 3 waveform graphs on another page. The charts have a history length of 2560, and 16 data points are added 16 times a second. The wavefom graphs are only updated once per minute.
I don't use the value property at all, but I do use lots of property nodes for changing the properties of the graphs and charts e.g. changing plot colours, Y scale range etc. There is only one local variable (for the Tab control). All the graphs and charts have data wired directly to their terminals.
I haven't done any profiling yet.
I am building arrays in uninitialised shift registers, but this is all well under control. As the experiement goes on, more data is collected and stored, and so the memory usage does gradually increase, but only to the extent that I would expect.
The CPU usage is 100%, but I thought this was always the case when using NIDAQ with DAQ cards. Or am I wrong about this? (As a side note, I am using NIDAQ traditional, but would NIDAQmx be better?)
Execution priority of the GUI vi (and all the other VIs for that matter) is set to normal.
The program is a bit large to post here, and I'm not sure if my company would be happy for me to publicise it anyway, so I suspect that this is turning into one of those questions that are going to be impossible to answer.
Just as a more general question, why would turning off multi-threading improve the user interface response?
Thanks,
Mark. -
Presentation on BI7.0 at user level
Hi Experts.
I am looking for presentations or documentation on BI7.0 improvements at user level.
I have to show my users the advantages and improvements of BI7.0 over BW3.5 to convince them about a migration, but I could not find such information.
Thanks and Regards.hi,
refer the below link
www.slideshare.net/srinath_vj/differences-between-bw35-bi70-presentation
https://www.sdn.sap.com/irj/scn/articles-intermediate?prtmode=print&startindex=281
https://www.sdn.sap.com/irj/scn/articles-data-warehousing-all?prtmode=print
www.saplounge.be/Files/media/cases/2008/TechDay2008/1.6---Siemens.pdf
thanks
naresh -
Dear EHS gurus,
It seems there EHS module is very niche and the documentation is not that huge compare to other SAP module.
I am wondering if anyone of you out there can sent me a copy of UAT document which I can practise by my myself on the following areas:
1 - Product safety,
2 - Hazardous substance management,
3 - Dangerous Goods
I know this is not allow on the forum rule on this action, however is there a way that you can show me any UAT document on the above topics on the website.
I try to provide an email to you but the forum seems not allow regardless what method i tried.
you can try the following:
yongyeow period ching at diagonal hypen consulting period com
the period is the .
Thanks a lot
YYHello
first I can not confirm that documentation regarding EH&S is bad. SAP has improved the documentation in the recent years and it is quite good in my opinion. Because of REACH and other legal topic EH&S is no "niche" product any more but is an important module in SAP in chemistry and similar industries. SAP has changed there strategy here. Now the have defined the "SAP Chemical Compliance" package. The integration of EH&S in other modules of SAP has been improved too.
second: the documentation you are requiring depends on SAP release you are using or would like to use and which functionality you would like to activate
third: the three modules PS, HSM and DG are the "core" modules of EH&S module. Such a document (an UAT document) will have a high number of pages; here the highest amount of work has to be done to my experience in the blue print phase, implementation and set up phase before you can use EH&S without problems
fourth; any company is using SAP EH&S a little bit different; therefore such an UAT document you are requiring does not exist
fith: to use EH&S you need good knowledge in these further modules:
MM
SD
and may be in
PP (if you would like to use thE BOMBOS interface)
and in some SAP Basis modules (e.g. class definition classes and characteristics) and Document Management etc.
sixth: installing EH&S: after installation of the SAP software the system is "empty" (therefore from user perspective not useful). First you need to define the business needs and depending on these needs there is a change in customizing required and a lot of programin etc.; furthermore with higher releases SAP has decided not to support sime user exists which there available in the past (example: calculation of the so called Status of registration). A number of company exists who are able to help you in preparing the se tup and content of EH&S.
So I am sorry: such an UAT document you are requiring is not available or if it would be available I would assume that nobody will pas it on
With best regards
PS: Please refer to the SAP documentation available. You will find documents regarding Bulding blocks (that means you will find information regarding the seqeunce of SAP moduöes you need to customize and to prepare before you can use EH&S. You will find more help regarding EH&S in the recent EH&S help at SAP (ECC 6.0 with may be Enhancement PAckage 4 if you would like to install this). A number of documents are still available describing lower SAP/EH&S releases.
Furthermore a high number of important information is available if you check the EHS& customizing (transaction spro) . Per topic there are a lot if hints you can use. And it is of high importance that you have discuess with you customer the business needs before you start to configure EH&S -
FI-CA events to improve performance
Hello experts,
Does anybody use the FI-CA events to improve the extraction performance for datasources 0FC_OP_01 and 0FC_CI_01 (open and cleared items)?
It seems that this specific exits associated to BW events have been developped especially to improve performance.
Any documentation, guide should be appreciate.
Thanks.
Thibaud.Thanks to all for the replies
@Sybrand
Please answer first whether the column is stored in a separate lobsegment.
No. Table,Index,LOB,LOB index uses the same TS. I missed adding this point( moving to separate TS) as part of table modifications.
@Hemant
There's a famous paper / blog post about CLOBs and Database Flashback. If I find it, I'll post the URL.
Is this the one you are referring to
http://laimisnd.wordpress.com/2011/03/25/lobs-and-flashback-database-performance/
By moving the CLOB column to different block size , I will test the performance improvement it gives and will share the results.
We dont need any data from this table. XML file contains details about finger prints and once the application server completes the job , XML data is deleted from this table.
So no need of backup/recovery operations for this table. Client will be able to replay the transactions if any problem occurs.
@Billy
We are not performing XML parsing on DB side. Gets the XML data from client -> insert into table -> client selects from table -> Upon successful completion of the Job from client ,XML data gets deleted.
Regarding binding of LOB from client side, will check on that side also to reduce round trips.
By changing the blocksize, I can keep db_32K_cache_size=2G and keep this table in CACHE. If I directly put my table to CACHE, it will age out all other operation from buffer which makes things worse for us.
This insert is part of transaction( Registration of a finger print) and this is the only statement taking time as of now compared to other statements in the transaction.
Thanks,
Arun -
To trigger the user exit EXIT_RMMR1MRB_001
Hi all,
When I keep a breakpoint in the exit EXIT_RMMR1MRB_001 and run the transaction MIRO, it is not going to this user exit .
The field entered are
Invoice date,posting date,reference ,amount,purchasing doc number,baseline date ,payment terms,payment method and NF type.
But it is not trigerring the MIRO. In the user exit documentation ,it is given that this user exit will call only if EF_CHANGE = 'X'.
1) So can you please mention which field does it corresponds to in MIRO transaction?
Kindly help me so...
Thanks in advance
Points will be rewardedHi ,
Following are some of the user exit that you can consider for Invoice verification.
LMR1M001 - User exits in Logistics Invoice Verification
LMR1M004 - Logistics Invoice Verification: item text for follow-on docs
MM08R002 - User exit for tolerance checks
Function EXIT_RMMR1MRB_001 - This is called only by report RMMR1MRB
Regards
Sriram -
Does any one can provide documentation model
Hi
I am new to this hyperion planning , does any one can provide model of the user requirement documentation (high level business process documentation). Herre the requiremnent is developing a budgeting application with all 3 business statements and emp info in detail manner.
regards
M.VCaptinSprinklez wrote:
Yes, do these steps,
Have you tested this throughly?
As an example 'lock' Safari via your method.
Now use Spotlight to search for Safari, tap it - is it 'locked'?
Now go to your email & find a link to click - Safari opens again.
Guided access is not a 'lock' in any sense of the word, it is a tool designed to stop things happening, but many apps have multiple ways to be found or launched you can't easily block them all.
Mallik_Hyderabad, iOS doesn't have this feature & Apple do not seem interested in adding it (7.5 years & it still isn't an option) - use a passcode with a lock screen timeout if you have any sensitive data on the device or get an Android device. -
Dear All,
In our company we are not implemented Controlling.So, I want Controlling Configuration & End user Manual Documentation.Can any one provide me.
Thanks & Regards,
Prasanna.Mhi
For controlling
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CO/CO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCCO/CAARCCO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_CO.pdf
nagesh
Maybe you are looking for
-
Open fce 3.5 project in fcp 5.1
Hi Gang, can anyone help me with this simple question... can i cut a project in fce3.5 and then email the project file to my colleague and have them open it up in their fcp 5.1? we do this at the moment between fcp5.1 and fcp5.1.4, and it works well.
-
Running an OA framwork page in Jdeveloper issue.
HI all I am looking to run an iSourcing page SelectTemplatePG.xml within JDeveloper. However when I run it I am getting a nullpointer exception ## Detail 0 ## java.lang.NullPointerException at oracle.apps.pon.negotiation.creation.server.Negotiat
-
Friend's Ipod Nano isn't being detected.
He claimed that when he would first plug it in, itunes would pop up and detect it. Along with Itunes, a "Temp" folder would also show up. He said he might have done something wrong with the folder and from then on, the computer and Itunes won't detec
-
Go Live Strategy for CO/MM
Hi, Please suggest the Go Live strategy for CO / MM especially from Product costing point of view. I have an issue, whether material prices of FG and SFG should be uploaded along with the quantity? 1.Whether, these prices are to be maintained in mate
-
Report to find Users that cannot Shop?
Hi All, Is there a report/program in SRM 5.0 that can tell what users are not configured correctly that will not allow them to shop? Also does the same report run in SRM 4.0? Thanks, Nikhil Edited by: Nikhil Malvankar on Nov 24, 2008 6:49 PM Edited b