Improve portlet performance - display the page before the end of the procedure
Some web pages display initial data and then continue to grow as
more data arrives.
I would love to do the same in a portlet procedure... A
procedure containing a loop that generates HTML for each
iteration.
Is it possible to have the browser display the page after one
iteration and then continue to grow after each subsequent one???
Please say it's possible...
Thanks,
Chris.
Fabrice,
the Dynamic Page is a special form of portlet that is supported by Oracle9iAS Portal internally, which means that it is not recommended to tweak the generated PL/SQL package even though you have access to it. By doing this you won't be able to make any changes using Portal UI because every time you do the changes your code will be regenerated. Unfortunately, I don't see an easy way to extract the information you are looking for in the Dynamic Page portlet. My recommendation is to programmatically create a PL/SQL portlet that implements the same business logic as your Dynamic Page portlet. This way you will gain full control on your code and will have all advantages of PDK-PL/SQL.
Hope this helps.
Similar Messages
-
Display the procedure OUT value.
CREATE OR REPLACE PROCEDURE test_xyz (p_acc_id IN NUMBER) IS
p_status varchar2(20);
begin
if p_acc_id = 123
DBMS_OUTPUT.PUT_LINE('STOP');
end if;
end test_xyz;
this will display 'STOP' when i passed p_acc_id as 123.
similarly...
CREATE OR REPLACE PROCEDURE test_abc (
p_acc_id IN NUMBER, p_status out varchar2) is
begin
if p_acc_id = 123
p_status := 'STOP';
end if;
end test_abc;
if i am using OUT in my procedure how i have to display the p_status vlaue.
Thnak you....CREATE OR REPLACE PROCEDURE test_abc (
p_acc_id IN NUMBER, p_status out varchar2) is
begin
if p_acc_id = 123
p_status := 'STOP';
end if;
end test_abc;
if i am using OUT in my procedure how i have to
display the p_status vlaue.
Thnak you....you forgot THEN after IF
declare
p_acc_id NUMBER := 123;
p_status VARCHAR2(30);
begin
test_abc (p_acc_id, p_status );
dbms_output.put_line(p_status);
end;
/** NOT TESTED ***
Regards
Dmytro
Message was edited by:
Dmytro Dekhtyaryuk -
Site Index Portlet Only Displays Public Pages
We have installed Site Index Portlet 9.0.4.0. It works as advertised, with one exception. The tree shows only shows pages that have the box "Display page to public users" checked. If this box is left unchecked and view access to the page is granted directly to the user, the page is not displayed in the site index tree. Has anyone else gotten this to work?
Yes, we are also having the same problem. I've also noticed that non-public pages will show up in the tree ONLY if you are the owner/creator of the page. It doesn't seem to look at any other group/user permissions.
-
Performance of the Procedure (Oracle 10.2.0.3.0)
Hi All,
I have written the following query . But it is taking more than 5 hrs. Can any one please look into this procedure and let me know the way 2 improve the performance of this.
Create or replace Procedure PROC1
v_code Raise_code.code%TYPE;
v_date DATE;
CURSOR cur1 (v_date DATE)
IS
SELECT DISTINCT ref_v.msn mscn, ref_v.recharge_type recharge_type,
ref_v.REFERENCE REFERENCE, icat.langcode lang_code
FROM tmp.refills_view ref_v, i_card_ale_tmp icat
WHERE ref_v.msn = icat.cardnbr
AND ref_v.currency IN (
SELECT prm_id_d
FROM tmp.prm
WHERE prm_id_h = 'CURRENCY'
AND prm_txt = 'EUR')
AND ref_v.recharge_amount >= 10
AND ref_v.date_exec > v_date
AND ref_v.msn NOT IN (
SELECT gl_msn
FROM s_write.ppa_gmlist
WHERE ppa_gmlist.prom_idct =
(SELECT prm_txt
FROM tmp.prm
WHERE prm_id_h = 'INVENTORY'
AND prm_id_d = 'INVENTORY_ID'))
AND icat.productprofil NOT IN ('BPL', 'SONATA');
rec cur1%ROWTYPE;
BEGIN
v_code := NULL;
v_date := NULL;
SELECT TO_DATE (prm_txt, 'DD-MON-YYYY')
INTO v_date
FROM tmp.prm
WHERE prm_id_h = 'INVENTORY' AND prm_id_d = 'LAST_DATE' AND prm_id_t = 'SD';
OPEN cur1 (v_date);
LOOP
FETCH cur1
INTO rec;
EXIT WHEN cur1%NOTFOUND;
SELECT code
INTO v_code
FROM tmp.Raise_code
WHERE SUBSTR (code, 1, 2) = TO_CHAR (SYSDATE, 'MM')
AND code_year = TO_CHAR (SYSDATE, 'YYYY')
AND nvl(msn,0) =0
AND ROWNUM = 1;
UPDATE Raise_code
SET msn = SUBSTR (rec.msn, 3),
REFERENCE = rec.REFERENCE,
recharge_type = rec.recharge_type,
assign_date = TRUNC (SYSDATE),
lang_code = rec.lang_code
WHERE code = v_code;
COMMIT;
END LOOP;
UPDATE tmp.prm
SET prm_txt = TO_CHAR (SYSDATE, 'DD-MON-YYYY')
WHERE prm_id_h = 'INVENTORY' AND prm_id_d = 'LAST_DATE' AND prm_id_t = 'SD';
COMMIT;
CLOSE cur1;
EXCEPTION
WHEN OTHERS
THEN
UPDATE tmp.prm
SET prm_txt = TO_CHAR (SYSDATE, 'DD-MON-YYYY')
WHERE prm_id_h = 'INVENTORY' AND prm_id_d = 'LAST_DATE' AND prm_id_t = 'SD';
COMMIT;
CLOSE cur1;
END PROC1;and I have created Index as
CREATE INDEX TMP.IDX_CODE_2 ON TMP.Raise_CODE
(CODE_YEAR, SUBSTR("CODE",1,2), NVL("MSN",'0'))
NOLOGGING
TABLESPACE TPOCLIENT_INDEX_5M_01
PCTFREE 0
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 237M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;Pleaase help me out in this.
Thank youI can tell you that you need not use Cursors for this. You can do that using one UPDATE command.
Something like this is possible.
update raise_code
set msn = (your cursor select with a correlated sub-query join)
where code = SELECT code
INTO v_code
FROM tmp.Raise_code
WHERE SUBSTR (code, 1, 2) = TO_CHAR (SYSDATE, 'MM')
AND code_year = TO_CHAR (SYSDATE, 'YYYY')
AND nvl(msn,0) =0
AND ROWNUM = 1;If you still want to use cursors, then I suggest you to include
SELECT TO_DATE (prm_txt, 'DD-MON-YYYY')
INTO v_date
FROM tmp.prm
WHERE prm_id_h = 'INVENTORY' AND prm_id_d = 'LAST_DATE' AND prm_id_t = 'SD';in the place of v_date in the cursor and NOT make it a parameterised cursor.
If you dig deeper, there can be some improvement in the SELECT clauses you had written, like accessing tmp.prm table manytimes etc. You can reduce the scans of few tables with the use of analytics.
In the first place, I don't like cursor LOOPs. I'm sure even the Oracle database doesn't and so it is dying to run your procedure.
Cheers
Sarma. -
Need help in improving the performance for the sql query
Thanks in advance for helping me.
I was trying to improve the performance of the below query. I tried the following methods used merge instead of update, used bulk collect / Forall update, used ordered hint, created a temp table and upadated the target table using the same. The methods which I used did not improve any performance. The data count which is updated in the target table is 2 million records and the target table has 15 million records.
Any suggestions or solutions for improving performance are appreciated
SQL query:
update targettable tt
set mnop = 'G',
where ( x,y,z ) in
select a.x, a.y,a.z
from table1 a
where (a.x, a.y,a.z) not in (
select b.x,b.y,b.z
from table2 b
where 'O' = b.defg
and mnop = 'P'
and hijkl = 'UVW';987981 wrote:
I was trying to improve the performance of the below query. I tried the following methods used merge instead of update, used bulk collect / Forall update, used ordered hint, created a temp table and upadated the target table using the same. The methods which I used did not improve any performance. And that meant what? Surely if you spend all that time and effort to try various approaches, it should mean something? Failures are as important teachers as successes. You need to learn from failures too. :-)
The data count which is updated in the target table is 2 million records and the target table has 15 million records.Tables have rows btw, not records. Database people tend to get upset when rows are called records, as records exist in files and a database is not a mere collection of records and files.
The failure to find a single faster method with the approaches you tried, points to that you do not know what the actual performance problem is. And without knowing the problem, you still went ahead, guns blazing.
The very first step in dealing with any software engineering problem, is to identify the problem. Seeing the symptoms (slow performance) is still a long way from problem identification.
Part of identifying the performance problem, is understanding the workload. Just what does the code task the database to do?
From your comments, it needs to find 2 million rows from 15 million rows. Change these rows. And then write 2 million rows back to disk.
That is not a small workload. Simple example. Let's say that the 2 million row find is 1ms/row and the 2 million row write is also 1ms/row. This means a 66 minute workload. Due to the number of rows, an increase in time/row either way, will potentially have 2 million fold impact.
So where is the performance problem? Time spend finding the 2 million rows (where other tables need to be read, indexes used, etc)? Time spend writing the 2 million rows (where triggers and indexes need to be fired and maintained)? Both? -
Canon Powershot SX60 HS video performance in the dark?
When I shoot videos indoors, not too dark really, with 1920x1080 (60p), noises occur everywhere. I tried tuning it into 1920x1080 (30p) but it didnt capture the image as delicate as I wanted. How can I improve its performance in the dark? Thanks.
Solved!
Go to Solution.I would guess it depends on how dark the room really is. The SX60 has a very small sensor in it and starts to get noisy if the lighting is too low. That camera does not have a real fast lens and quickly loses light catching ability as you zoom in. Can you add some additional lighting to help your situation? I realize that may not be a possibility. Is there any way you can increase the ISO setting just a bit, or make sure the aperture is as close to f3.4 when shooting? These may not be available in video modes, but if they are, it could help you.
Cameras with larger sensors and brighter lenses will generally do better in lower light situations. If you are doing a lot of shooting in the dark you might need to consider a second camera with these traits.
Steve M. -
Portlet that displays links inside it
I need a portlet that displays the links inside the portlet without opening a new window.
Thanks
nullHi there,
We've been playing around with something like this. We wanted to create an application which acted as an autonomous entity within a portal page. We finally managed to do this with a combination of the parameters passing example and use of session variables (wwpre_api). The thing here is that any session variables must be referenced with the portlet reference and a portlet's show method must always pre-check for the current state.
The main thing to watch out for is that you want any portlets shown on a particular page to retain state while you are "working" in another portlet, hence the session variables.
This is now growing into an application framework which allows screen changes (i.e. edit to list and back) to occur from links within the portlet, without jumping to a new page. We are considering to eventually release this when we cleaned things up a bit. -
It has never done this before. I play a game that constantly refreshes the page & have never had problems before until yesterday. I have looked in tools and there's nothing in the option section that will let me stop it. Is there somewhere else to look?
Perhaps someone should report this to MarketWatch. There are ways for web developers to work around this issue (GET after POST, for example).
This is a longstanding issue. Examples:
[https://support.mozilla.com/en-US/questions/668932 how do i stop this-To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier.?]
[https://support.mozilla.com/en-US/questions/780884 To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier]
In past discussions about this message, I have never seen an easy solution. Arguably it should be made a user preference: those who prefer to be warned about the risk that they will double-submit a transaction or instruction on a poorly designed site can have their warning, and those who prefer to take their chances can take their chances. Not sure whether that is on anyone's "to do" list.
Separate issue: I wasn't aware of any difference between 3.6.12 and 3.6.13, but both are riddled with security vulnerabilities so it's hard to recommend using either of them at this point. -
How to display the text in a classical report before top-of-page?
Hi all,
I am developing a classical report with top-of-page because i want to display the texts of cloumns even users scroll down the output.
But here the problem is i have to display a text and selection screen values in the ouput ,Before this top-of-page. But i couldn't find the way to do it.
Please help me on solving this problem?
Thanks,
Vamshi.Hi Vamsi,
whenever there is write statement and you are going to display some thing the system checks for the TOP-OF-PAGE and we are helpless here
so declare your heading in the TOP-OF-PAGE only
THIS is SAP provided way of the SYSTEM bahaviour
Regards
ramchander Rao.k -
How to display a mssg on page before the adf lifecycle process has ended?
Hi;
We have an ADF Application(11.1.1.3). We sign a document with a mobile signature. To do this we use a webservice call. During this call a hash is generated for the user to check and sign the document. Everything is fine but we couldn't find a way to display the generated hash on the page before the adf lifecycle process has finished. The hash should be displayed on the screen while the rest of the method is proceeding. After 2 minutes, the hash is timed out. How can we do this?
The method is as follows:
public boolean docFirstSign(String telNo, int gsmOperator, String evrakNo) {
String filePathToSign = null;
boolean signOpResult = false;
FileProcessor fileP = new FileProcessor();
try {
filePathToSign = fileP.getFilePathToSign(evrakNo);
byte[] imzalanacakVeri = MobilImza.getBytesFromFile(filePathToSign);
String dataToBeDisplayed = "Size atanmis ve evrak uygulamasi uzerinden goruntulediginiz "+ evrakNo +" numarali evraki mobil olarak imzalayacaksiniz!";
MSS_SenderSoapProxy proxy = new MSS_SenderSoapProxy();
HashResult res = proxy.getHashForGsmOperator(imzalanacakVeri, telNo, 1);
Here the hash is generated. This should be displayed on the page, as at the same time a mobile message is sent to the user to check it and sign it. And the method shoud go on processing.
Logging.getLogger().info("Message -->"+res.getMessage());
//Hash kontrol
if (res.getResultCode()==0) {
SignatureResult sres = proxy.getSignature(dataToBeDisplayed,res.getApTransId()); //Turkce karakter olmayacak
Logging.getLogger().info("sres.getResultCode()-->"+sres.getResultCode());
if (sres.getResultCode()==0) {
byte[] imzaliData = MobilImza.base64Decode(sres.getSignedData());
System.out.println(sres.getMessage());
FileOutputStream fos = new FileOutputStream(new File(filePathToSign));
fos.write(imzaliData);
fos.close();
signOpResult = fileP.docCheckin(evrakNo);
} else {
fileP.cancelCheckout(evrakNo);
} else {
Logging.getLogger().error("Hash Hesaplanamadi");
fileP.cancelCheckout(evrakNo);
return signOpResult;
} catch (Exception e) {
e.printStackTrace();
fileP.cancelCheckout(evrakNo);
return signOpResult;
return signOpResult;
}Hi,
its a synchronous method execution which means that the display of a popup only works when there is a response to the initial request. What about - as soon as you generated the Hash - show a popup to the user asking him/her to take a note of the hash and then confirm that the document or whatever you want to sign and send to the mobile should be processed. So when the user clicks ok on the message dialog you continue with the remaining of your method
Frank -
How display the page where the portlet PLSQL is executed
I have build a simple PLSQL portlet in 9ias 9.0.2.
This portlet display the name of the user connected. I would have too the name of the page where this portlet is displayed. Because i put this portlet in different page of my portal.
I think information is in portlet_runtime_record (like page_url), but i don't know how call this value into PLSQL Portlet (portlet_runtime_record.page_url ????)
Thanks in advanced
<HTML>
<HEAD>
</HEAD>
<BODY>
<ORACLE>
declare
rt:=portal.wwsec_api.person_info(portal.wwctx_api.get_user());
htp.p(rt.first_name||' '||rt.last_name);
htp.p('Liste des Urls');
htp.br;
htp.p('IP:'||portal.wwctx_api.get_ip_address);
htp.p('NAME:'||portal.wwctx_api.get_user);
end;
</ORACLE>
</BODY>
</HTML>Fabrice,
the Dynamic Page is a special form of portlet that is supported by Oracle9iAS Portal internally, which means that it is not recommended to tweak the generated PL/SQL package even though you have access to it. By doing this you won't be able to make any changes using Portal UI because every time you do the changes your code will be regenerated. Unfortunately, I don't see an easy way to extract the information you are looking for in the Dynamic Page portlet. My recommendation is to programmatically create a PL/SQL portlet that implements the same business logic as your Dynamic Page portlet. This way you will gain full control on your code and will have all advantages of PDK-PL/SQL.
Hope this helps. -
message reads
to display this page firefox must send information that will repeat any action (such as a search or order confirmation)that was performed earlier
resend cancel
how do i stop keep getting this pop upI assume that you mean a Greasemonkey script for KoC ?
Try [/questions/780792] -
Improve PC Performance transcript of Meet the Experts online chat event
On June 1st, HP hosted an online chat event on improving PC performance. Below is a transcriptof that session.
Please note that I have altered the transcript so that follow up questions areincluded in the logical order.
I am in the process of planning the next chatevent. I would love to hear what topics would interest you, what day of theweek and time is best for you, and if you think an hour is too long.
So, if you get a minute, please let me know.
Here's the transcript:
SiobhanF-HP: Welcome!
SiobhanF-HP: If you want to ask a question, you must be a member of the HP Support Forums. If you want to join, go here https://passport2.hp.com/hppcf/createuser.do
SiobhanF-HP: Our team of experts is here and ready to tackle your toughest questions.
SiobhanF-HP: Bryan_N began tinkering with computers in the early 80s with the Atari 400. He has been at HP for almost 10 years and is focused on notebooks and Wireless Wide Area Networks (WWAN.)
SiobhanF-HP: RasterBlaster, aka Randy, also began his fascination with computers 30 years ago when he spent $550 for an Atari 400. He has been addicted to desktop computers ever since and has worked at HP for 16 years.
SiobhanF-HP: Mister Do, aka Kevin, has worked for HP for 11 years. He is a desktop guy and has been ripping PCs apart to see how they work and get better performance out of them for more than 20 years.
SiobhanF-HP: Sanchertx, aka Ralph, is another 20 year PC veteran. He has worked at HP for 15 years and focuses on improving notebook and network performance.
SiobhanF-HP: Huffer, aka Steve, is an attorney by day and a PC enthusiast by night. Although Steve does not work for HP, he is an avid member of the Support Forums. His forte is troubleshooting hardware and software issues, and he uses Linux as a personal operating system instead of Windows.
DexterM: Hello people. I believe that the main reason PC's slow down is because of files leftover after program uninstalls. Many programs leave behind files that store user settings and preferences of the programs even after "complete" uninstallation. Is there any way to completely remove them during uninstallation?
Bryan_N: To DexterM Hi Dexter, Some applications have specific removal tools to fully clean them out, such as the Norton Removal Tool. You can go to symantec.com and search for "Norton Removal Tool". There are also third party applications for cleaning out abandoned registry files, such as CrapCleaner which is what I have used personally. It can be found at ccleaner.com
nseidl33: Can I add more memory to my notebook? If I do, will it void the warranty?
Sanchertx: To nseidl33 hello Nseid133, no you will not void the warranty - you should make sure the specs match up if you buy memory from someone other than HP. That said, you may be required to remove the memory in the event there is a troubleshooting session with HP Support.
aarond22: Does adding more memory really make my PC run faster? If it does, how can I figure out how much memory to add and how hard is it to do?
RasterBlaster: To aarond22 While you use your computer, all software and drivers take up memory. Windows "places" the software and drivers into the hardware memory first because it is fastest. After it runs out of hardware memory it will eventually store the excess data on the hard drive which is much slower. So the amount of memory you have will speed up your computer, but how much speed depends on several factors. Generally, for Vista 64-bit, adding up to 4 GB has the biggest speed gains. Over 4 GB doesn't speed things up all that much unless you do things like video or large graphic editing - software that uses a lot of data. You can find memory upgrade information from the product specification or motherboard specification for your model of desktop PC. This HP support article should answer everything:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph03886&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USE....
animeowns: need a good gaming video card dx10 to play the newer games in hpa1720n
Huffer: To animeowns I am a big fan of the ATI HD 4800 series. It is DX10 compatible and very fast.
HPMAN10: I have a problem with my PC freezing up when I return from sleep mode. This just starting happening recently. Could it have anything to with installing Windows Vista Service Pack 2?
Huffer: To HPMAN10 Have you also added any new hardware? Sleep mode issues are often driver related. Also, some systems need to have their BIOS updated after installing Vista SP2.
HPMAN10: No I have not added new drivers. So you’re saying I should upgrade the BIOS. Isn't that a tricky to do? It could cause more problems.
Huffer: To HPMAN10 Yes, you should be careful with the BIOS upgrades but it should work well from Windows. Close all other programs and be patient with it.
HPMAN10: What about the freeze up in sleep mode? Do I need to update the BIOS for that problem too?
Huffer: To HPMAN10 Yes, there is a good chance it will help, and it cannot hurt to have the latest BIOS. Here is a good link for information: http://technet.microsoft.com/enus/library/dd335032(WS.10).aspx
Here is a good link to locate BIOS Updates for notebooks http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00042629&tmp_track_link=ot_faqs/top_issues/en_u...
Here is a good link to update the BIOS for desktops http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00007682&cc=us&lc=en&dlc=en HPMAN10: So I should update the BIOS from the HP download page?
Huffer: To HPMAN10 Yes, use the Windows-based BIOS updater. Turn off all other programs.
HPMAN10: If I have a problem with BIOS update can I do a system restore to revert back to original BIOS?
RasterBlaster: To HPMAN10 System Restore will not revert to a previous BIOS. System Restore is only for Windows - BIOS is a separate lower level function.
Huffer: To HPMAN10 BIOS is not part of the operating system, but you can flash back to an earlier version of the OS if needed. I really doubt you will have an issue. HPMAN10: I have a HP s3220n system and my Windows Media Center has a Tuner Not Installed message when I try to use live TV, I have tried everything from HP online support to Microsoft Help and nothing has solved the problem. Any suggestions?
RasterBlaster: To HPMAN10 s3220n comes with a tuner card. The no tuner found error can happen when some other TV capture software "checks out" the tuner. If you have a startup item, like webcam software that is set to hook into the Tuner card, you should go in and change the setting or remove it. Have you read this support document?http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01187871&cc=us&lc=en&dlc=en
HPMAN10: Yes I have read the HP document and tried the suggestions on it without success.
HPMAN10: I do not have a webcam.
HPMAN10: Also my PC Doctor software does not show tuner in the diagnostic program.
Mister_Do: To HPMAN10 If your tuner card is not showing up in PC Doctor, try opening the PC and reseating the tuner. If it still doesn't work, you possibly have a hardware failure.
HPMAN10: Yes I tried hardware and software recovery in HP Help and Tools. Same results NO TUNER INSTALLED.
RasterBlaster: To HPMAN10 Well, unless you did something major ... like upgrade your OS to Vista SP2... or something like that... I'd say your tuner hardware is gone. Especially if you did a system recovery. System recovery takes you back the original configuration
HPMAN10: I have removed the tuner card and reseated it without results in PC Doctor. I'll try it once more.
HPMAN10: Will a BIOS update also help the TV tuner problem?
HPMAN10: By the way I can watch programs I have recorded in the past in Media Center.
RasterBlaster: To HPMAN10 I don't think the BIOS update will help... here is the text from the site: M2N61-AR Motherboard BIOS update resolves issue with the computer shutting down and displaying message "ERROR: Unsupported CPU installed. PC will automatically shut down in a few seconds." Did you reinstall the driver from HP Help and Tools? There should at least be an unknown device in Device Manager. You older files that you are able to view are simply files that were created before you lost your tuner. “No Tuner Found” just means that Media Center cannot find the card because the card is "Check out" of the drivers are out of whack.
HPMAN10: I had tuner problem even before I installed SP2.
RasterBlaster: To HPMAN10 Well, if your tuner died and you could never get it to work after that, it might be a heat related failure. Tuners get hot... but usually, when a tuner gets too hot, you'll get some funny symptoms before it dies... like channel changing takes way too long -- to change up or down - or lots of frame skipping. IF it comes and goes - you have a software conflict problem.
amberdidi: Hi to you all, Why am I constantly receiving the following message and what can I do to correct it. "Windows cannot access the specified device, path or file. You may not have the appropriate permissions" Note: After I click Ok to this message it usually takes me to the page anyhow.
Bryan_N: To amberdidi Hi amberdidi, I'm not sure what OS you have, but this is a helpful document from Microsoft for XP: http://support.microsoft.com/?kbid=308421
amberdidi: About that message "Windows cannot access the specified device...." I am using Vista Home Edition 64 bit SP2.
Bryan_N: To amberdidi Ok, thanks for the clarification. It sounds like it is a security setting in Internet Explorer, try this please: http://support.microsoft.com/kb/959079
animeowns: Did you receive my other message?
Mister_Do: To animeowns Yes, we are working on it.
animeowns: I need a card that will fit in my computer case right now I’m using a 7900 and it’s a tight fit. Here are the specs for my motherboard http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00864946&lc=en&dlc=en&cc=us&os=2093&product=334...
animeowns: It must be about 7.8 x 3 x 4.4 inches – that’s the size of my 7900 gs, and it’s a tight fit. My motherboard is Micro-ATX: 9.6 in X 9.6 in. Please help. I want to upgrade to a nice card that will be able to play games like crysis fear 2 unreal tournament 3.
RasterBlaster: To animeowns Yeah, finding low-profile cards can be tricky. It sounds like you have the measurement. Searching the internet shopping sites for low-profile graphics cards should bring up some cards - then find one you like and work with the site to make sure it fits your measurement. HP can supply a replacement - but if it is not on HP shopping's site - you can go with other shopping sites.
animeowns: Will this video card fit in my system? http://www.newegg.com/Product/Product.aspx?Item=N82E16814127414
Mister_Do: To animeowns Sorry, I haven't tried that one personally, so I'm not sure. You'll need to make sure your current card dimensions match the new card.animeowns: Can someone please help me find a direct x 10 gaming card that will fit in my hp a1720n? The size has to be 7.8 x 3 x 4.4 inches or smaller that is the size of my pny 7900 gs and its a tight fit because the memory is real close.
RasterBlaster: To animeowns Huffer had to step out. The folks trying to help you in this chat session are from HP. We can't recommend a video card upgrade that did not already come with your PC - sorry You should post this same question into the forums under desktop PC and hardware (or video) category.
whitey: I have a ZD-7015us laptop and would like to know if the processor can be upgraded.
Huffer: To whitey I wouldn’t really recommended it because it is hard to know if it will overheat, but a Pentium 4 desktop processor will fit.
SiobhanF-HP: If you have specific product questions, the more information you give us the better we will be able to help you. Getting your exact model number; any error messages; what operating system version are you running; any recent hardware or software changes will go a long way to helping us answer your question.
amberdidi: I would like to know if NOD 32 antivirus is compatible with my Vista 64 bit. I am using Avast at the moment, but I am really interested in NOD32 or a good quality antivirus you can recommend for 64 bit. Thank you.
Huffer: To amberdidi I use Avast or AVG on Vista 64 bit systems and either works well. I have only used NOD32 on 32 bit systems. The NOD32 website will answer this question definitively.
amberdidi: Back to the freezing problem with my Vista 64 bit. I downloaded only the final version of SP2 but I have updated most of my drivers including the latest NVIDIA driver from their site. Should I also update my BIOS?
Sanchertx: To amberdidi Yes, update the BIOS.
DexterM: Other than unchecking Startup Programs from MS Configuration Utility, is there any other way to speed up startup time of a Windows PC?
RasterBlaster: To DexterM There are lots of methods. If you have Vista - go in and shut down aero, if you don't need it, make sure your temp files are cleared, etc... Here is a support document:http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00815926&cc=us&lc=en&dlc=en
XP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph06569&cc=us&lc=en&dlc=en
Blondechica: I just bought a HP HDX16 and I am embarrassed to say I do not how to find the On button. I am using my friend’s computer and told him that I had a different problem with my computer and gave this site. Also, when I do get it turned on will it be blank. Do have to buy software? I hope this is not the first time someone has asked this question. This is all new to me. Thank you for your help.
Sanchertx: To Blondechica Hello, please hit the power button on the top left of the keyboard cover. This will illuminate to a blue color to show the unit is on. You must let the unit create the image. This means you will let it run on its own until you see the Welcome screen. The unit comes with the Vista operating system and has HP applications. It also comes with trial versions of Norton antivirus and MS Office.
Petedog11: I have the HP Pavilion a6745f Desktop PC and would like to upgrade my graphics card. I like to run high-end flight simulators. What graphics card do you recommend? Will I need to upgrade my power supply unit also? Is there a way to disable the on board graphics card that came with the computer once I install a new graphics card? Thank you.
Huffer: To Petedog11 A new power supply should not be needed. When you plug in a new video card it will automatically disable the onboard. Just be sure you have a pci-e poer connector (6 pin)
Petedog11: The power supply unit that is in my HP Pavilion a6745f Desktop PC is 300 watts I believe. My understanding is that the newer Radeon's etc...need more power. Will you please answer the remainder of my original question.....I like to run high-end flight simulators. What graphics card do you recommend? Thanks!
Huffer: To Petedog11 300 watts is a bit light. I would look for around a 500 watt psu.
mlk3742: I have a dv9000 laptop, it has 4 gigs of ram. I run Photoshop CS4. Is there any way to increase processing speed?
Sanchertx: To mlk3742 While there isn’t a switch you can turn on to make the processor run faster, you can do things like remove un-needed software and remove items from startup. Also disabling HP Advisor helps. Here is a good reference -
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00816938&lc=en&dlc=en&cc=us&lang=en&rule=13847&...
amberdidi: Since I downloaded SP2 on my Vista Home Edition I also am freezing up every so often to the point that I have to use Task Manager to end it and start over again. I have an HP Elite with 1000GB hard drive and 8192MB memory. What can I do? Thank you.
Bryan_N: To amberdidi If you downloaded the beta version of SP2 you might want to uninstall it and download the final version. If you downloaded the final version and this started with SP2, you can check the Problem Reports and Solutions feature of Vista. Just click the Start button, and type: Problem Reports, then click on the application
scribblesteve: Besides the usual cleaning up Temp files and using Disk Clean up or Defrag, how can I prevent my computer from running sluggishly? I want it to run as fast and as smooth as it did the first time I turned it on?
Mister_Do: To scribblesteve Removing startup items or keeping programs from running in the background helps a lot. And depending on what operating system you have there are multiple settings you can change to improve performance. Here are two HP support documents that list multiple ways to improve your PC performance: For XP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph06569&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USE...
For Vista: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00815926&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
bjm: I have a Compaq Presario A931NR Notebook BIOS F.32 Software Driver download site displays F.34 I don't know if I should Update to F.34 because F.32 is not listed as a previous version, and I don't know if I can go from F.32 to F,34 without F.33
Huffer: To bjm No problem. You can easily skip a level of BIOS update and go right to 3.4.
bjm: Need to know if I should update my BIOS
Huffer: To bjm The update will work, but I really need to know what your problem is to assess whether the BIOS update is necessary.
bjm: HP Updates report no available Updates so how do I know if I need Update other than what is presented on Software Driver download page
Mister_Do: To bjm If HP Update says you don't have any new updates, then your PC is up to date with the latest drivers. If you by chance see a software or driver file on you product support page, and it's newer than what you have. You can install it, but if your PC is running fine, you may not want to bother.
bjm: Huffer asked why is BIOS update necessary. I would ask why does Software Update site show an Update if it's not necessary? HP Update is not working to report BIOS updates. 13 months and no Updates ever. So, all I have to go by is Software Update site which report newer BIOS with Enhancements to Security. Why would Total Care Advisor, HP Health Check and HP Update not have even one Update or info after 13 months of service?
RasterBlaster: To bjm The software BIOS update page on hp.com/customercare should tell you what the BIOS update fixes or improves. If your system is running well or the BIOS update page does not list a fix for your problem - don't update the BIOS. That's my opinion anyway. BIOS updates do introduce a level of risk. For example if you have a power outage while updating the BIOS, the PC will require service. So ... if in doubt, don't do it unless you know it resolves an issue.
bjm: The BIOS Update to F.34 is stated as having Security Enhancements. Does the System Info refresh with a BIOS update or is System Info static
Mister_Do: To bjm Where are you viewing the System Info? From the BIOS itself, from "Properties" under "Computer", etc.? Here’s good document on Locating HP Software, Driver and BIOS Updates:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00042629&tmp_track_link=ot_faqs/top_issues/en_u...
puter_student: I sent my hp Mini 1000 (Win XP) into service about two weeks ago. I gave a lady friend a 1120NR (Mi on Linux) yesterday. As she is a geographic distance, and using a different OS, how would you suggest I assist her by telephone. And, once she establishes solid Internet access, is it best to send her e-mail or instant messages?
Bryan_N: To puter_student Hi Puter_student, you have several choices since HPMI supports MSN messenger and other chat programs via the "pidgeon" application, and it also comes preinstalled with Skype. You can install either of those on your XP unit. Skype also allows you to use a webcam at the same time.
puter_student: Sorry, I stated my question badly. I did not mean to ask about the communications technology. I meant the information resources available online -- to both her and me -- WRT setup, configuration (if needed), etc. The realization came to me earlier today that I cannot "walk" her thru it by simply telling her what I see on my own machine as I take certain actions [other, of course, than accessing appropriate documents about her model]. Can you point me in the right direction to those resource documents?
Bryan_N: To puter_student For support documents you can start here:
http://h10025.www1.hp.com/ewfrf/wc/product?product=3860346&lc=en&cc=us&dlc=en&lang=en&cc=us
puter_student: I clicked the link you supplied. Doing so took me out of this chat, but did not get me where you were trying to send me. Now, when I return to the chat, I no longer have the earlier session history. When will it be posted, and where can I find the whole chat session later?
Bryan_N: To puter_student The transcript will be posted on the boards within 48 hours after this event. I got to the link by going to hp.com, and searching for support on "mini 1110nr" http://h10025.www1.hp.com/ewfrf/wc/product?product=3860346&lc=en&cc=us&dlc=en&lang=en&cc=us
The MI desktop is based on Ubuntu, and you can also find lots of general Ubuntu information on external forums Certain applications have support externally as well, such as the Firefox browser.
mlk3742: to Sanchertx: Can I swap out or replace the graphics card to speed up graphic intensive demands such as Photoshop?
Sanchertx: To mlk3742 Hello - not with our notebooks. They are either attached to system board or a daughter board, which is then attached to the system board.mlk3742: to Sanchertx: So there is no way from a hardware approach to increase speed? The only time I notice my lap slows down is processing large files, i.e. photos, or while performing image edits in Photoshop. After increasing RAM, everything else has speeded up noticeably. My laptop has more than half the hard drive space free.
Sanchertx: To mlk3742 Hardware wise you can get a faster hard drive - example move from a 5400 rpm to 7200 RPM - Also make sure you have the latest BIOS update. These usually have maintenance modifications to resolve potential problems and tweak the hardware.mlk3742: to Sanchertx: How and or where do I get a BIOS upgrade? Do you have a recommendation for which hard drive to get? Will any aftermarket drive fit in my laptop?
Sanchertx: To mlk3742 Hello – this document Locating HP Software, Driver and BIOS Updates should help http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00042629&tmp_track_link=ot_faqs/top_issues/en_u... I cannot recommend a 3rd party - aftermarket drive - but there are many available. A good place to look is notebookforum.com.
scribblesteve: My battery is fine, but the HP Battery check doesn't recognize it. I have the most updated versions of BIOS, Help and Support and sp41862, and it still doesn't recognize it. I'm running Vista32bit on an HP pavilion dv6704nr. What else can I try to check and prolong the life of my battery?
Bryan_N: To scribblesteve Hi scribblesteve, ensure the battery is charged and the AC adaptor is plugged in when testing. If that doesn't work, you can do some basic battery life steps. These are found at http://h20239.www2.hp.com/techcenter/battery/Battery_max.htm and also at http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00821429&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
DexterM: What tweaks do you guys usually do on your Windows PC's to ensure optimal PC performance?
Bryan_N: To DexterM Hi DexterM, I uninstall any applications I don't use, run Microsoft and HP updates, keep a good antivirus installed, and also I personally use a third party application called ccleaner. I back up my unit in full every month as well just in case.
amdkenworth: Hi I have an HP that has a on board video card and it won’t show any video when its turned on???
RasterBlaster: To amdkenworth First thing you should do is try connecting another monitor to see if it is related to the monitor or the video on the motherboard. Here is document that you should check out: http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph04760&lc=en&dlc=en&cc=us&lang=en&rule=3950&pr...
jest1: My notebook has a short battery life. Is there something I can do?
Sanchertx: To jest1 A: There are several things you can do to extend battery life such as changing your power plan, calibrating your battery to increase capacity, or shutting off unused features in the OS. Here is an excellent document on notebook battery usage that will walk you through your options step by step http://tinyurl.com/57x38x
Dominick_7: Hi I have an HDX 9000t and was wondering if anyone knew if/how I could upgrade the graphics card, to say an MXM GPU?
Bryan_N: To Dominick_7 Hi Dominick_7, there isn't a way to upgrade the video card itself. You can ensure you have the latest drivers by visiting hp.com and checking drivers, and keep your overall system optimized with standard PC Tune up steps such as this document: c00034290 - HP Notebook PCs - Improving the Performance of Your Notebook PC
Dominick_7: From what I understand, an HP tech told me MXM has on board BIOS which doesn’t depend on the BIOS from the motherboard. What leads you to say it can’t be done?
Bryan_N: To Dominick_7 The video card is separate, but not replaceable as it is directly attached to the system board
Dominick_7: Can't the same be said about the processor? Yet I know people who have updated their processors, and GPUs when they upgrade them from an ATI to the 8800M GTS NVIDIA GPU? If you could please elaborate in a more detailed fashion as to what the obstacles are I'd appreciate it. Is that the ONLY reason why you say it can't be done? Because it’s directly connected to the motherboard? If that was insurmountable wouldn't that make it impossible to upgrade the ATI GPU in lower specd HDXs to the 8800 NVI...
Bryan_N: To Dominick_7 The CPU is not soldered onto the system board, so it is replaceable. The GPU/Graphics card is soldered onto the system board and is not replaceable.
SSPatrick: HP Total Care Advisor is giving me warnings - How do I clear these up?
Sanchertx: To SSPatrick Click on the PC Update button inside of Advisor to check for and run updates. After you run all the necessary updates, you should click on Health Check to scan your computer to remove the warnings. Here is a good document on the ins and outs of Total Care Advisor. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01599730&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Petedog11: I have the HP Pavilion a6745f Desktop PC. Media Center came pre-installed with the computer. Do I have a Tuner card installed?
Mister_Do: To Petedog11 Hi Petedog11, It doesn't look like you have a TV Tuner installed. Here is your product spec for reference: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01625611&cc=us&lc=en&dlc=en&product=3870515
laurensw: I installed antivirus software and now my PC is running really slow - what should I do?
Bryan_N: To laurensw Hi Laurensw, It often helps to ensure the original antivirus software was fully removed. One possible solution is to use the Norton Removal Tool to completely remove the trial version of Norton that shipped with your PC.
rdewing: My PC is about a year old and it is getting slower and slower. Do I have a virus? Is there something that I can do to make run faster?
Mister_Do: To rdewing It is tough to say why your PC is running slowly, but there are some things you can do that may help its performance. Check out this web site for step by step instructions on basic PC care. http://h20239.www2.hp.com/techcenter/pctuneup/ HP also offers free online classes to teach you how to tune up your XP or Vista PC. Check it out http://tinyurl.com/lj86yt
scribblesteve: I'm having a graphics problem where I cannot see images. I have only seen it with the HP Help and Support and the Installation of Adobe Web Premium Installation. I have no Idea how to fix this, and neither does anyone in the multiple Support Forums I've posted the problem in. Here are some screenshots: http://www.stevedolan.com/shared/graphicsproblem.jpg | http://www.stevedolan.com/shared/graphicsproblem2.jpg
Bryan_N: To scribblesteve This one looks like something I cannot answer before the event terminates. Can you start a thread on this on the customer forums here and we can continue? If you already have, can you send me the link and I can subscribe to it?
scribblesteve: Bryan_N: Here is that link: http://h30434.www3.hp.com/psg/board/message?board.id=Display&message.id=1715#M1715
Bryan_N: To scribblesteve Thanks scribblesteve
SiobhanF-HP: We are nearing the end of our chat session. We only have time for 3 more questions. If we did not get to your question, please post it on the Notebook and Desktop boards.
jest1: It takes my PC a pretty long time to boot. Any recommendations?
Mister_Do: To jest1 The first two things I would consider doing would be to 1) add more memory to your PC (unless you already have max memory), and 2) I would change my Startup program and process settings. Here are a few HP Support documents that explain how to prevent unnecessary programs from running at startup: For Vista: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00813419 For Vista: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00819747&cc=us&lc=en&dlc=en For XP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07149&cc=us&lc=en&dlc=en
SiobhanF-HP: We only have time for one more question. If we did not get to your question, please post it on the Notebook or Desktop boards.
jest1: I think I have a notebook battery that was part of a recent recall, what do I do about this?
Mister_Do: To jest1 Visit the HP Notebook PC Battery Pack Replacement Program Web site at: http://www.hp.com/support/BatteryReplacement for additional information and to determine if your battery is part of the program.
jest1: How can I find out the maximum amount of memory my system can accept?
Mister_Do: To jest1 HP has product specifications for your PC on its web site. Go to www.HP.com and click on Software Driver and enter your exact PC model name. You must give the specific model number, ex dv9009nr, and not the series number, ex dv9000. Click on the document that references Product Specifications at the top of the list of articles. You will get a detailed breakdown of your system including microprocessor, graphics card, and the maximum amount of memory you can load onto your PC.
SiobhanF-HP: We are ending the chat event. Thank you for coming. We hope you found it worthwhile. I will be posting a transcript of the event in announcement section at the top of the Notebook and Desktop boards. Please feel free to continue these conversations on the Forums.
SiobhanF-HP: We will be hosting future Meet the Experts chat sessions on a variety of topics, so please tell us what you thought of the event and how it could be improved.
Message Edited by timhsu on 06-02-2009 05:28 PM
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.hello sir,
i want to your help
i was installed fresh windows 7 via cd rom and then after installed all software.
and now after 1 day customer complained me that cd rom not read any cd and i m also check when i insurt cd so its not read and when i am double click on cd rom icon its eject so what i do for that please reply on my email address.
[text removed for privacy]
VIMAL -
To improve the system performance of the code
Please help me to improve the system performance of the following program. its very urgent
report zsdr0125
no standard page heading
* LINE-SIZE 170 " SIR 061880
line-size 210 " SIR 061880
line-count 58
message-id zz.
** Report header ******************************************************
** Report name: Activity Costing Report
** Report id: RO-01148
** Designed/Coded. Tori Chandler. Reporting Team.
** Date: March 01, 2000.
** Original SIR: 016113
** Application Area: V - Sales & Distribution (OTC)
** Correction/Transport: D10K951579
** Description: It is normal business practice for logistics
** operations to charge business units for the activity
** incurred on their behalf. This is consistent with
** activity based costing principles between BU and
** shared resources. The activities involved are picking
** storage, shipping and receiving. The purpose of this
** report is to provide data for the first 3.
** QRB2 - 03/13/2000 - Tracy, Antoine, Christian, Tori
** History:
* 06/14/2001 SIR 032383 CTS Antoine Dailly
* A plant (WERKS) can have several Distrib points (VSTEL)
* SIGN = 032383
* Modification History:
* Date Modified by SIR CTS Description
*11/14/2001 J.CAMPION 034606 D10K979189 Logistics Activity report
* Logistics Activity reports
* We added fields ship to customer and country and we also make another
* total
* QRB2 Tracy L. Obrien
* Modification History:
* Date Modified by SIR CTS Description
*11/14/2001 J.CAMPION 37838 D10K982890 Select only
* material type HALB
*06/12/2002 T OBrien 38784 D10K988181
* Allow option to get material weight from Master data or
* from the delivery.
* Modified by SIR CTS Date
* Jim Harwood 42730 D10K993119 10 Oct 2002
* Description: Code amended to default the Goods Issue Date range to
* the previous month. Also amended to print out the Select Options.
* Modified by SIR CTS Date
* Jim Harwood 44381 D10K994598 18 Nov 2002
* Description: Correct date range processing. APPEND statement added
* so that record is added ot internal table S_WADAT. Also S_VKORG
* removed as it was NO DISPLAY and nothing was assigned to it. It's use
* in an SQL call may be causing the wrong optimization.
* Modified by SIR CTS Date
* Tori Chandler 45567 D10K995875 03 Jan 2003
* Description: Correct reporting of weights for non-pickable items
* when the Material Master Data radiobutton is selected. Also found
* from SIR 37838, that material type is hardcoded on the LIPS. I
* created a new select option and the person needing the report
* can control if they want only HALB or all line items. Also,
* because of this the delivery weight is obtain from header,
* changing to accumulate from LIPS to match which lines are selected
* QRB2: 1/15/2003: Eileen, Jerome and Tori
*{ INSERT D11K901833 1
* Modified by Sir CTS Date
* Sue Kastan 48712/054042 D11K901833 28 Aug, 2003
* Fix overcounting of records from LIPS
*} INSERT
* Modified by SIR CTS Date *
* Vijay Andea 061880 D11K918628 04/20/2006 *
* D11K946194 *
* Description: Enhence ZSDR0125 Activity Cost Driver Report to allow *
* Analysis by Product Groupings. *
*} INSERT
* Modified by SIR CTS Date *
* Prakash Arunachalam 091510 D11K950288 09/26/2006 *
* Description: Correct Activity Cost report - material weight *
* calculation *
* Modified by SIR CTS Date *
* Murali Krishna 301978 D50K903293 01/20/2008
* Description: Improve the system performance of this report and
* clean-up of code into various form routine
* Table declaration.
tables: likp, " SD Document: Delivery Header Data
lips, " SD document: Delivery: Item data
vepo, " SD Document: Shipping Unit Item (Content)
vekp, " SD Document: Shipping Unit Header
knvv, " Customer Master Sales Data
kna1, " General Data in Customer Master SIR 34606
marm, " Units of Measure
mara, " Material Master: General Data SIR 38784
t001l, " Stge locs
t001k, " Valuation area
tvswz, " Shipping Points per Plant
t134, " Material types
z0234. " Alternative Unit of Measure
*** Selection screen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_werks like t001l-werks obligatory memory id wrk.
select-options: s_lgort for t001l-lgort,
* S_VKORG FOR TVKO-VKORG NO-DISPLAY ," SIR 34606, 42730
* S_WADAT FOR LIKP-WADAT_IST OBLIGATORY NO-EXTENSION,
s_wadat for likp-wadat_ist no-extension, " SIR 42730
s_mtart for t134-mtart, " SIR 45567
s_lfart for likp-lfart no-display no intervals.
selection-screen skip 2.
selection-screen comment 1(21) text-002. " SIR 38784
parameters: p_delwt radiobutton group grp1, " SIR 38784
p_mstwt radiobutton group grp1. " SIR 38784
*--------------------------------------------------*Start of SIR 061880
selection-screen skip 2.
selection-screen comment 1(21) text-006.
parameters: p_voldl radiobutton group 2, " Volume from Delivery
p_volmd radiobutton group 2. " Volume from Master Data
*-----------------------------------------------------End of SIR 061880
selection-screen end of block b1.
*--------------------------------------------------*Start of SIR 061880
selection-screen begin of block b2 with frame title text-007.
select-options: s_cbuun for knvv-kvgr1 no intervals, " Customer BU
s_mbuun for mara-prdha+1(2) no intervals, " Material BU
s_lobus for mara-prdha+3(3) no intervals, " LOB
s_pac1 for mara-prdha+6(3) no intervals. " PAC1
selection-screen end of block b2.
*----------------------------------------------------*End of SIR 061880
*---Type Declaration for Internal Tables------------------------------*
types: begin of t_likp,
vbeln like likp-vbeln, " delivery
vstel like likp-vstel, " shipping point
lfart like likp-lfart, " delivery type
vkorg like likp-vkorg, " Sales organization
kunag like likp-kunag, " sold-to party
kunnr like likp-kunnr, " ship to party SIR 34606
btgew like likp-btgew, " Delivery weight
gewei like likp-gewei, " Unit of weight
anzpk like likp-anzpk, " Number of Packages SIR 61880
volum like likp-volum, " Delivery Volume SIR 61880
voleh like likp-voleh, " Volume Unit SIR 61880
vtwiv like likp-vtwiv, " Distribution channel
spaiv like likp-spaiv, " Division
wadat_ist like likp-wadat_ist, " actual goods issue date
del_flg(1) type c, "(+) SIR 301978
end of t_likp.
types: begin of t_lips,
vbeln like lips-vbeln, " delivery
posnr like lips-posnr, " delivery line
matnr like lips-matnr, " material
lgort like lips-lgort, " storage location
prodh like lips-prodh, " product hierarchy
meins like lips-meins, " base UoM
brgew like lips-brgew, " Material weight
gewei like lips-gewei, " Unit of weight
volum like lips-volum, " Material Volume SIR 61880
voleh like lips-voleh, " Volume Unit SIR 61880
lgmng like lips-lgmng, " actual delivery quantity
komkz like lips-komkz, " Indicator for picking control
mtart like lips-mtart, " Material type " SIR 37838
del_flg(1) type c, "(+) SIR 301978
end of t_lips.
types: begin of t_vepo,
venum like vepo-venum, " shipping unit number
vbeln like vepo-vbeln, " delivery
end of t_vepo.
types: begin of t_vekp,
venum like vekp-venum, " shipping unit number
brgew like vekp-brgew, " actual weight
gewei_max like vekp-gewei_max, " unit of weight
vpobjkey like vekp-vpobjkey, " key for assigned object
end of t_vekp.
types: begin of t_knvv,
kunnr like knvv-kunnr, " customer number
ktgrd like knvv-ktgrd, " acct assign group
kvgr1 like knvv-kvgr1, " customer group 1
end of t_knvv.
types: begin of t_kna1, " SIR 34606
kunnr like kna1-kunnr, " customer number " SIR 34606
land1 like kna1-land1, " contry " SIR 34606
end of t_kna1. " SIR 34606
types: begin of t_marm,
matnr like marm-matnr, " material
meinh like marm-meinh, " Alt unit of measure 032383
umrez like marm-umrez, " numerator
umren like marm-umren, " denominator
end of t_marm.
types: begin of t_mara, " SIR 38784
matnr like mara-matnr, " material " SIR 38784
prdha like mara-prdha, " Product Hierarchy " SIR 61880
brgew like lips-brgew, " gross weight " SIR 38784
gewei like mara-gewei, " Unit of weight " SIR 38784
volum like mara-volum, " Volume " SIR 61880
voleh like mara-voleh, " Volume Unit " SIR 61880
del_flg(1) type c, "(+) SIR 301978
end of t_mara. " SIR 38784
types: begin of t_tvswz,
vstel like tvswz-vstel, " shipping point
end of t_tvswz.
types: begin of t_z0234, "032383
vstel like z0234-vstel, " shipping point 032383
zpaluom like z0234-zpaluom," pallet unit of measure 032383
zcsuom like z0234-zcsuom," Case unit of measure 032383
end of t_z0234. "032383
types: begin of t_output_dt,
wadat_ist like likp-wadat_ist, " Goods issue date
ktgrd like knvv-ktgrd," acct assign group
bu like knvv-kvgr1," business unit
kunnr like kna1-kunnr," ship to location SIR 34606
land1 like kna1-land1," ship to location SIR 34606
d_btgew like likp-btgew," delivery weight
m_brgew like lips-brgew," material weight
a_brgew like vekp-brgew," actual weight of ship unit
num_del type i, " counter of deliveries
num_pallets type i, " number of pallets
num_cases type i, " number of cases
num_loose type i, " loose quantity
num_delln type i, " counter of delivery lines
* packages like likp-anzpk," Number of Packages " SIR 61880
packages(3) type p, " Number of Packages " SIR 61880
volume like lips-volum," Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_dt.
types: begin of t_output_ag,
ktgrd like knvv-ktgrd," acct assign group
bu like knvv-kvgr1," business unit
land1 like kna1-land1," country SIR 34606
d_btgew like likp-btgew," delivery weight
m_brgew like lips-brgew," material weight
a_brgew like vekp-brgew," actual weight of ship unit
num_del type i, " counter of deliveries
num_pallets type i, " number of pallets
num_cases type i, " number of cases
num_loose type i, " loose quantity
num_delln type i, " counter of delivery lines
* packages like likp-anzpk," Number of Packages " SIR 61880
packages(3) type p, " Number of Packages " SIR 61880
volume like lips-volum," Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_ag.
types: begin of t_output_gs, " SIR 34606
ktgrd like knvv-ktgrd," acct assign group " SIR 34606
bu like knvv-kvgr1," business unit " SIR 34606
d_btgew like likp-btgew," delivery weight " SIR 34606
m_brgew like lips-brgew," material weight " SIR 34606
a_brgew like vekp-brgew," actual weight " SIR 34606
num_del type i, " counter of deliv " SIR 34606
num_pallets type i, " number of pallets " SIR 34606
num_cases type i, " number of cases " SIR 34606
num_loose type i, " loose quantity " SIR 34606
num_delln type i, " counter of deliv " SIR 34606
* packages like likp-anzpk, " Number of Package " SIR 61880
packages(3) type p, " Number of Packages" SIR 61880
volume like lips-volum, " Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_gs. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* Material Type
types: begin of t_mtart,
mtart like t134-mtart, " Material Type
end of t_mtart.
* Customer Business Unit.
types: begin of t_kvgr1,
kvgr1 like knvv-kvgr1, " Customer Group 1
end of t_kvgr1.
* sales Organization.
types: begin of t_lgort,
lgort like t001l-lgort, " Sales Organization
end of t_lgort.
* Begin of SIR 301978
* Header: Material Document
types: begin of t_mkpf,
vgart type mkpf-vgart,
xblnr type likp-vbeln,
end of t_mkpf.
* End of SIR 301978
*---------------------------------------------------* End of SIR 061880
*---Internal Tables---------------------------------------------------*
data: i_likp type t_likp occurs 0 with header line,
i_temp_likp type t_likp occurs 0 with header line,
v_likp type t_likp,
i_lips type t_lips occurs 0 with header line,
i_temp_lips type t_lips occurs 0 with header line,
v_lips type t_lips,
i_vepo type t_vepo occurs 0,
* V_VEPO TYPE T_VEPO,
i_vekp type t_vekp occurs 0,
v_vekp type t_vekp,
i_knvv type t_knvv occurs 0 with header line,
v_knvv type t_knvv,
i_kna1 type t_kna1 occurs 0, " SIR 34606
v_kna1 type t_kna1, " SIR 34606
i_z0234 type t_z0234 occurs 0, " 032383
v_z0234 type t_z0234, " 032383
i_z0234_uom type t_z0234 occurs 0, " 032383
v_z0234_uom type t_z0234, " 032383
i_marm type t_marm occurs 0 with header line," SIR 61880
i_marm_pallet type t_marm occurs 0 with header line,
v_marm_pallet type t_marm,
i_marm_case type t_marm occurs 0 with header line,
v_marm_case type t_marm,
*-------------------------------------------------* Begin of SIR 061880
* I_MARA TYPE T_MARA OCCURS 0, " SIR 38784
i_mara1 type t_mara occurs 0 with header line,
i_mtart type t_mtart occurs 0 with header line,
i_kvgr1 type t_kvgr1 occurs 0 with header line,
i_lgort type t_lgort occurs 0 with header line,
v_kvgr1 type t_kvgr1,
*---------------------------------------------------* End of SIR 061880
v_mara type t_mara, " SIR 38784
i_tvswz type t_tvswz occurs 0,
v_tvswz type t_tvswz, "(+) SIR 301978
i_output_dt type t_output_dt occurs 0,
v_output_dt type t_output_dt,
i_output_ag type t_output_ag occurs 0,
v_output_ag type t_output_ag,
i_output_gs type t_output_gs occurs 0, " SIR 34606
v_output_gs type t_output_gs, " SIR 34606
i_mkpf type table of t_mkpf with header line."SIR 301978
*** Data Declarations *
data: v_page(3) type c, " Page Counter
v_comp like t001k-bukrs, " zbsn0001 company code
v_title(24) type c, " zbsn0001 report title
v_rpttyp type c, " report type
v_ok type c, " control While... endwhile
v_diff_date type p, " days between selection
v_werks like t001l-werks, " plant
* v_z0234_zpaluom like z0234-zpaluom, " Pallet Unit of Measure
* v_z0234_zcsuom like z0234-zcsuom, " Case Unit of Measure
v_palwto type p decimals 6, " SIR 091510
* "like likp-btgew, " Weight after conversion
v_vekp_tabix like sy-tabix, " index on read
v_vekp_sum_brgew like vekp-brgew, " actual weight
v_pallet_qty like lips-lgmng, " calculated pallet qty
v_pallet_integer type i, " true pallet qty
v_case_qty like lips-lgmng, " calculated case qty
v_case_integer type i, " true case qty
v_qty_not_pallets like lips-lgmng, " calculated
v_num_pallets like lips-lgmng, " calculated nbr of pallets
v_num_pallets_int type i, " true nbr of pallets
v_num_cases like lips-lgmng, " calculated nbr of cases
v_num_cases_int type i, " true nbr of cases
v_total_case_qty like lips-lgmng, " case quantity
v_loose_qty type i, " calculated loose quantity
*-------------------------------------------------* Begin of SIR 061880
v_volume like lips-volum, " Volume After Convertion
v_cbuun like knvv-kvgr1, " Customer BU
v_mbuun like knvv-kvgr1, " Material BU
v_lobus(3) type c, " Line of Business
v_pac1(3) type c, " PAC1
v_flag type c. " Flag Indicator for No Data
*---------------------------------------------------* End of SIR 061880
* Begin of SIR 301978
* Ranges
ranges : r_vstel for tvswz-vstel.
* End of SIR 301978
* Constants
data: c_uom(3) type c value 'KG'. " Kilogram Unit of Meas.
data : c_vom like mara-voleh value 'M3'. " Metter Cube. " SIR 061880
constants : c_wl(2) type c value 'WL'. "(+) SIR 301978
* Initialization.
initialization.
s_lfart-sign = 'I'.
s_lfart-option = 'EQ'.
s_lfart-low = 'LF '.
append s_lfart.
s_lfart-low = 'NL '.
append s_lfart.
s_lfart-low = 'NLCC'.
append s_lfart.
s_lfart-low = 'ZLFI'.
append s_lfart.
* AT SELECTION-SCREEN.
at selection-screen.
* SIR 42730 - If no Goods Issue Date has been specified in the
* Select Options set the range to the previous month.
if s_wadat-low is initial.
s_wadat-sign = 'I'.
s_wadat-option = 'BT'.
s_wadat-high = sy-datum. " Today's date
s_wadat-high+6(2) = '01'. " First of this month
s_wadat-high = s_wadat-high - 1. " End of last month
s_wadat-low = s_wadat-high. " End of last month
s_wadat-low+6(2) = '01'. " First of last month
append s_wadat.
endif. " SIR 42730 IF S_WADAT-LOW IS INITIAL.
clear v_werks. "(+) SIR 301978
* Validate Plant/Storage Location from selection screen
select werks up to 1 rows into v_werks from t001l
where werks = p_werks and
lgort in s_lgort.
endselect.
if sy-subrc ne 0.
message e045 with text-e01.
endif.
* Validate Storage Location
if not s_lgort[] is initial.
select lgort from t001l into table i_lgort where lgort in s_lgort.
if sy-subrc ne 0.
message e045 with text-e09.
endif.
endif.
* Validate date range. do not allow more that 31 days
if not s_wadat-high is initial.
v_diff_date = s_wadat-high - s_wadat-low.
if v_diff_date >= '31'.
message e045 with text-e02.
endif.
endif.
*-------------------------------------------------* Begin of SIR 061880
* Validation for Material Type in Selection Screen
if not s_mtart[] is initial.
select mtart from t134 into table i_mtart where mtart in s_mtart.
if sy-subrc ne 0.
message e045 with text-e07.
endif.
endif.
at selection-screen on block b2.
* Validation for Material Business Unit and Customer Business Unit.
if s_cbuun-low is not initial and s_mbuun-low is not initial.
message e045 with text-e05.
endif.
* Validation for Possible combinations of Material BU, Line of Business
* and PAC1
if ( s_mbuun-low is not initial and s_lobus-low is not initial
and s_pac1-low is not initial )
or ( s_mbuun-low is not initial and s_lobus-low is not initial )
or ( s_lobus-low is not initial and s_pac1-low is not initial )
or ( s_mbuun-low is not initial and s_pac1-low is not initial ).
message e045 with text-e06.
endif.
* Validation for Customer Business Unit.
if not s_cbuun[] is initial.
select kvgr1 from tvv1 into table i_kvgr1 where kvgr1 in s_cbuun.
if sy-subrc ne 0.
message e045 with text-e08.
endif.
* free: i_kvgr1.
endif.
*---------------------------------------------------- End of SIR 061880
* TOP-OF-PAGE
* Top of the page routine to print the headers and columns
top-of-page.
format color col_heading on.
if v_rpttyp = 'D'.
v_title = text-h01.
else.
v_title = text-h02.
endif.
perform zbsn0001_standard_header " Standard Report Heading Form
using v_comp v_title 'U' v_page.
skip.
if v_rpttyp = 'D'.
perform write_dtlvl_headings.
else.
perform write_aglvl_headings.
endif.
* FORM WRITE_DTLVL_HEADINGS *
* for date detail level, print the column headers *
form write_dtlvl_headings.
write: /001 text-h03, " Acct
038 text-h04, " ------ P I C K I N G ------
105 text-h05, " ----- S H I P P I N G -----
/001 text-h06, " Group
007 text-h07, " Date
017 text-h08, " BU
021 text-h17, " ship to party 34606
030 text-h18, " country
039 text-h09, " Pallets
057 text-h10, " Cases
075 text-h11, " Loose
093 text-h12, " Lines
105 text-h13, " Material Kg
124 text-h16, " Delivery Kg
143 text-h14, " Actual Kg
161 text-h15, " Deliveries
*----------------------------------------------------Start of SIR 61880
173 text-h20, " Packages
189 text-h21, " Volume
201 text-h22, " LOB
207 text-h23. " PAC1
*-----------------------------------------------------*End of SIR 61880
skip.
endform. " end of write_dtlvl_headings.
* FORM WRITE_AGLVL_HEADINGS *
* for account group detail level, print the column headers *
form write_aglvl_headings.
write: /001 text-h03, " Acct
038 text-h04, " ------ P I C K I N G ------
105 text-h05, " ----- S H I P P I N G -----
/001 text-h06, " Group
017 text-h08, " BU
030 text-h18, " country SIR 34606
039 text-h09, " Pallets
057 text-h10, " Cases
075 text-h11, " Loose
093 text-h12, " Lines
105 text-h13, " Material Kg
124 text-h16, " Delivery Kg
143 text-h14, " Actual Kg
161 text-h15, " Deliveries
*---------------------------------------------------*Start of SIR 61880
173 text-h20, " Packages
189 text-h21, " Volume
201 text-h22, " LOB
207 text-h23. " PAC1
*-----------------------------------------------------*End of SIR 61880
skip.
endform. " end of write_aglvl_headings.
*-------------------------- SUBBROUTINES -----------------------------*
include zbsn0001. " Include to print all Standard Report Titles
include zsdn0004. " Print the Select Options
*** MAIN SELECTION. *
start-of-selection.
refresh: i_likp, i_temp_likp, i_lips, i_temp_lips, i_vepo,
i_vekp, i_knvv, i_marm_pallet, i_marm_case, i_tvswz,
i_output_dt, i_output_ag, i_mara1.
clear: v_likp, v_lips, v_vekp, v_knvv, v_mara,
v_marm_pallet, v_marm_case, v_output_dt, v_output_ag.
v_rpttyp = 'D'.
* SIR 42730 - Echo the Select Options to the output listing and print
* the Goods Issue Date range being used.
write: /,/. " SIR 43730 - Skip a couple of lines to centre it.
perform zsdn0004_print_select_options using sy-cprog ' '.
if s_wadat-high is initial.
write: /,/, text-003, 34 s_wadat-low.
else.
write: /,/, text-003, 34 s_wadat-low, 44 text-004, 47 s_wadat-high.
endif.
new-page.
* Main Processing. *
perform get_data.
if not i_lips[] is initial.
perform create_output.
endif.
* END-OF-SELECTION
end-of-selection.
*-------------------------------------------------* Start of SIR 061880
* PERFORM WRITE_REPORT.
if not i_output_dt[] is initial and not i_output_ag[] is initial and
not i_output_gs[] is initial.
perform write_report.
else.
skip 2.
write:/ text-e03.
skip 2.
uline.
clear: v_flag.
endif.
*---------------------------------------------------* End of SIR 061880
* FORM GET_DATA *
* build all of the internal tables needed for the report *
* selects on t001k, z0234, likp, lips, vepo, vekp, knvv & marm, mara *
form get_data.
perform get_data_t001k. " SIR 301978
perform get_data_tvswz. " SIR 301978
if sy-subrc = 0. " Build shipping point range
perform get_data_Z0234. " SIR 301978
if sy-subrc ne 0.
v_flag = 'X'.
* stop.
else.
sort i_z0234 by vstel. " 032383
endif.
* Begin of SIR 301978
* The data retrievalfrom LIKP has been modified for performance
* reasons
perform get_data_mkpf. " SIR 301978
if sy-subrc eq 0.
* Deleting data other than Goods issued for delivery
delete i_mkpf where vgart ne c_wl.
sort i_mkpf by xblnr.
endif.
* Deleting the data from the internal table i_likp by comparing
* shipping point
r_vstel-sign = 'I'.
r_vstel-option = 'EQ'.
clear : v_tvswz.
loop at i_tvswz into v_tvswz.
r_vstel-low = v_tvswz-vstel.
append r_vstel.
endloop.
if not i_mkpf[] is initial.
perform get_data_likp. " SIR 301978
endif.
if sy-subrc = 0.
delete i_likp where not lfart in s_lfart.
* End of SIR 301978
* Get data for the delivery lines
if not i_likp[] is initial.
perform get_data_lips. " SIR 301978
* Begin of SIR 301978
if i_lips[] is initial.
v_flag = 'X'.
message i089 with text-i02.
leave list-processing.
endif. " Return code for LIPS select
* End of SIR 301978
endif.
*-------------------------------------------------* Begin of SIR 061880
* Get Data From MARA (Material Master) to Read Material Weight and
* Material Voluem from Master Data.
if not i_lips[] is initial.
* Begin of SIR 301978
* Delete the duplicate material from delivery item table
i_temp_lips[] = i_lips[].
sort i_temp_lips by matnr.
delete adjacent duplicates from i_temp_lips comparing matnr.
perform get_data_mara. " SIR 301978
if sy-subrc = 0.
sort i_mara1 by matnr.
clear i_temp_lips.
refresh i_temp_lips.
* End of SIR 301978
else.
v_flag = 'X'.
message i089 with text-i01.
leave list-processing.
endif.
endif.
* Filter I_LIPS and I_MARA1 When Either material BU or Line of
* Business (LOB) or PAC1 are not left Balnk
perform filter_data_for_prdha.
* Get data for the sold-to customer
perform i_knvv_fill_data.
* Filter I_LIKP & I_LIPS & I_MARA for Cust-BU, When Cust-Bu is not
* left Blank.
perform filter_likp_lips_mara_custbu.
*---------------------------------------------------- End of SIR 061880
*-------------------------------------------------* Begin of SIR 034606
* Get data for the ship to party
i_temp_likp[] = i_likp[].
sort i_temp_likp by kunnr.
delete adjacent duplicates from i_temp_likp comparing kunnr.
perform get_data_kna1. " SIR 301978
if sy-subrc = 0.
sort i_kna1 by kunnr.
endif.
*---------------------------------------------------* End of SIR 034606
else.
v_flag = 'X'.
message i089 with text-i04.
leave list-processing.
endif. " return code to LIKP select
* endif. " SIR 061880
free: i_temp_likp.
endif. " return code for TVSWZ select
* Process table LIPS
if not i_lips[] is initial.
i_temp_lips[] = i_lips[].
sort i_temp_lips by vbeln.
delete adjacent duplicates from i_temp_lips comparing vbeln.
* Get actual weight
perform get_data_vepo. " SIR 301978
if sy-subrc = 0.
sort i_vepo by venum.
delete adjacent duplicates from i_vepo comparing venum.
perform get_data_vekp. " SIR 301978
sort i_vekp by vpobjkey.
endif.
free: i_vepo, i_temp_lips.
i_temp_lips[] = i_lips[].
sort i_temp_lips by matnr.
delete adjacent duplicates from i_temp_lips comparing matnr.
* Get Units of Measure for Material
perform read_data_from_marm. " SIR 061880
* Begin of SIR 032383
i_z0234_uom = i_z0234.
sort i_z0234_uom by zpaluom.
delete adjacent duplicates from i_z0234_uom comparing zpaluom.
* End of SIR 032383
clear i_marm_pallet. " SIR 061880
refresh i_marm_pallet. " SIR 061880
loop at i_z0234_uom into v_z0234_uom. "LOOP Z0234 032383
*-------------------------------------------------* Begin of SIR 061880
* Get Alternative Unit of Measure for Pallets
perform i_marm_pallet_fill.
endloop. "ENDLOOP Z0234 032383
** get alternative UoM for pallets
* SELECT MATNR " material
* MEINH " Alt unit of measure " 032383
* UMREZ " numerator
* UMREN " denominator
** into table i_marm_pallet " 032383
* APPENDING TABLE I_MARM_PALLET "032383
* FROM MARM
* FOR ALL ENTRIES IN I_TEMP_LIPS
* WHERE MATNR = I_TEMP_LIPS-MATNR AND
** meinh = v_z0234_zpaluom. " 032383
* MEINH = V_Z0234_UOM-ZPALUOM. " 032383
*---------------------------------------------------* End of SIR 061880
sort i_marm_pallet by matnr meinh.
free i_z0234_uom. "032383
i_z0234_uom = i_z0234. "032383
sort i_z0234_uom by zcsuom. "032383
delete adjacent duplicates from i_z0234_uom comparing zcsuom."32383
clear i_marm_case. " SIR 061880
refresh i_marm_case. " SIR 061880
loop at i_z0234_uom into v_z0234_uom. "LOOP Z0234 032383
*-------------------------------------------------* Begin of SIR 061880
* Get Alternative Unit of Measure for Cases
perform i_marm_case_fill.
endloop. "ENDLOOP Z0234 032383
*---------------------------------------------------* End of SIR 061880
sort i_marm_case by matnr meinh.
else.
v_flag = 'X'.
message i089 with text-i02.
* leave list-processing.
endif. " table LIPS is empty
endform. " get_data
* FORM CREATE_OUTPUT *
* process internal table LIPS, for each delivery/delivery lines create*
* an output record and collect into i_output internal table. Fields *
* used for header are goods issue date, acct assign, BU for customer, *
* total weight, total weight for shipping unit and count of *
* deliveries, the remaining fields will have a value of zero for the *
* collect. For each delivery line, fields used are goods issue date, *
* acct assign, BU for material, number of pallets, number of cases, *
* loose quantity and number of delivery lines. The remaining header *
* fiels will be zero for the collect. *
form create_output.
*-------------------------------------------------* Begin of SIR 061880
sort i_mara1 by matnr.
sort i_lips by vbeln posnr matnr.
sort i_likp by vbeln.
sort i_z0234 by vstel.
sort i_knvv by kunnr.
sort i_kna1 by kunnr.
sort i_vekp by vpobjkey.
sort i_marm_pallet by matnr meinh.
sort i_marm_case by matnr meinh.
* LOOP AT I_LIPS INTO V_LIPS.
loop at i_lips.
clear v_lips.
v_lips = i_lips.
*---------------------------------------------------* End of SIR 061880
at new vbeln.
perform collect_header_data.
endat.
if not v_lips-komkz is initial. " SIR 45567
perform collect_item_data.
endif. " SIR 45567
endloop.
endform. " create_output
* FORM COLLECT_HEADER_DATA *
* Fields used for header are goods issue date, acct assign, *
* BU for customer, total weight, total weight for shipping unit *
* and count ofdeliveries, the remaining fields will have a value of *
* zero for the collect. *
form collect_header_data.
clear: v_likp, v_knvv, v_vekp, v_vekp_sum_brgew.
v_ok = 'Y'.
read table i_likp into v_likp with key vbeln = v_lips-vbeln
binary search.
if sy-subrc = 0. " SIR 061880
clear v_z0234. "(+) SIR 301978
read table i_z0234 into v_z0234 "32383
with key vstel = v_likp-vstel "32383
binary search. "32383
read table i_knvv into v_knvv with key kunnr = v_likp-kunag
binary search.
if sy-subrc ne 0.
select single ktgrd kvgr1 into (v_knvv-ktgrd, v_knvv-kvgr1)
from knvv where kunnr = v_likp-kunag and
vkorg = v_likp-vkorg and
vtweg = '01' and " intercompany values
spart = '01'. " intercompany values
endif.
clear v_kna1. " SIR 34606
read table i_kna1 into v_kna1 " SIR 34606
with key kunnr = v_likp-kunnr " SIR 34606
binary search. " SIR 34606
read table i_vekp into v_vekp
with key vpobjkey(10) = v_likp-vbeln
binary search.
if sy-subrc = 0.
v_vekp_tabix = sy-tabix.
while v_ok = 'Y'.
if v_vekp-gewei_max ne c_uom.
perform z_unit_conversion
using v_vekp-brgew v_vekp-gewei_max c_uom v_palwto.
v_vekp_sum_brgew = v_vekp_sum_brgew + v_palwto.
else.
v_vekp_sum_brgew = v_vekp_sum_brgew + v_vekp-brgew.
endif.
v_vekp_tabix = v_vekp_tabix + 1.
read table i_vekp into v_vekp
index v_vekp_tabix.
if sy-subrc = 0.
if v_vekp-vpobjkey(10) ne v_likp-vbeln.
v_ok = 'N'.
endif.
else.
v_ok = 'N'.
endif.
endwhile.
endif.
endif. " SIR 061880
* populate output tables
clear: v_output_dt, v_output_ag,v_output_gs. " SIR 34606
v_output_dt-wadat_ist = v_likp-wadat_ist.
v_output_dt-ktgrd = v_knvv-ktgrd.
v_output_ag-ktgrd = v_knvv-ktgrd.
v_output_gs-ktgrd = v_knvv-ktgrd. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* V_OUTPUT_DT-BU = V_KNVV-KVGR1.
* V_OUTPUT_AG-BU = V_KNVV-KVGR1.
* V_OUTPUT_GS-BU = V_KNVV-KVGR1. " SIR 34606
* Populate Business Unit,Line of Busness and PAC1 Values in Header Data
perform get_busunit_lobus_pac1_data1.
*---------------------------------------------------* End of SIR 061880
v_output_dt-kunnr = v_kna1-kunnr. " SIR 34606
* V_OUTPUT_AG-KUNNR = V_KNA1-KUNNR. " SIR 34606
v_output_dt-land1 = v_kna1-land1. " SIR 34606
v_output_ag-land1 = v_kna1-land1. " SIR 34606
v_output_dt-a_brgew = v_vekp_sum_brgew.
v_output_ag-a_brgew = v_vekp_sum_brgew.
v_output_gs-a_brgew = v_vekp_sum_brgew. " SIR 34606
if s_mbuun[] is initial and " SIR 61880
s_lobus[] is initial and " SIR 61880
s_pac1[] is initial. " SIR 61880
v_output_dt-num_del = 1.
v_output_ag-num_del = 1.
v_output_gs-num_del = 1. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* Number of Packages
v_output_dt-packages = v_likp-anzpk.
v_output_ag-packages = v_likp-anzpk.
v_output_gs-packages = v_likp-anzpk.
else.
clear: v_output_dt-num_del,
v_output_ag-num_del,
v_output_gs-num_del,
v_output_dt-packages,
v_output_ag-packages,
v_output_gs-packages.
endif.
*---------------------------------------------------* End of SIR 061880
collect v_output_dt into i_output_dt.
collect v_output_ag into i_output_ag.
collect v_output_gs into i_output_gs. " SIR 34606
endform. " collect_header_data
* FORM COLLECT_ITEM_DATA *
* For each delivery line, fields used are goods issue date, *
* acct assign, BU for material, number of pallets, number of cases, *
* loose quantity and number of delivery lines. The remaining header *
* fiels will be zero for the collect. *
form collect_item_data.
clear: v_pallet_qty, v_pallet_integer,
v_case_qty, v_case_integer,
v_num_pallets, v_num_pallets_int,
v_num_cases, v_num_cases_int,
v_qty_not_pallets, v_total_case_qty, v_loose_qty.
read table i_marm_pallet into v_marm_pallet
with key matnr = v_lips-matnr
meinh = v_z0234-zpaluom binary search."32382
if sy-subrc = 0.
v_pallet_qty = v_marm_pallet-umrez / v_marm_pallet-umren.
* round down partial pallets
v_pallet_integer = v_pallet_qty - '.499'.
endif.
read table i_marm_case into v_marm_case
with key matnr = v_lips-matnr
meinh = v_z0234-zcsuom binary search."32382
if sy-subrc = 0.
v_case_qty = v_marm_case-umrez / v_marm_case-umren.
* round down partial cases
v_case_integer = v_case_qty - '.499'.
endif.
if v_pallet_integer > 0.
v_num_pallets = v_lips-lgmng / v_pallet_integer.
v_num_pallets_int = v_num_pallets - '.499'.
endif.
v_qty_not_pallets = v_lips-lgmng -
( v_num_pallets_int * v_pallet_integer ).
if v_case_integer > 0.
v_num_cases = v_qty_not_pallets / v_case_integer.
v_num_cases_int = v_num_cases - '.499'.
endif.
v_total_case_qty = v_num_cases_int * v_case_integer.
if v_qty_not_pallets = v_total_case_qty.
v_loose_qty = 0.
else.
v_loose_qty = 1.
endif.
* populate output tables
clear: v_output_dt, v_output_ag, v_output_gs. " SIR 34606
v_output_dt-wadat_ist = v_likp-wadat_ist.
v_output_dt-ktgrd = v_knvv-ktgrd.
v_output_ag-ktgrd = v_knvv-ktgrd.
v_output_gs-ktgrd = v_knvv-ktgrd. " SIR 34606
v_output_dt-kunnr = v_kna1-kunnr. " SIR 34606
* V_OUTPUT_AG-KUNNR = V_KNA1-KUNNR. " SIR 34606
v_output_dt-land1 = v_kna1-land1. " SIR 34606
v_output_ag-land1 = v_kna1-land1. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* V_OUTPUT_DT-BU = V_LIPS-PRODH+1(2).
* V_OUTPUT_AG-BU = V_LIPS-PRODH+1(2).
* V_OUTPUT_GS-BU = V_LIPS-PRODH+1(2). " SIR 34606
* Populate Business Unit,Line of Business and PAC1 Values for Item Data.
perform get_busunit_lobus_pac1_data2.
if V_OUTPUT_DT-BU is initial.
clear V_OUTPUT_DT.
exit.
endif.
*---------------------------------------------------* End of SIR 061880
* get delivery weight from delivery lines instead of header " SIR 45567
if v_lips-gewei = c_uom.
v_output_dt-d_btgew = v_lips-brgew.
v_output_ag-d_btgew = v_lips-brgew.
v_output_gs-d_btgew = v_lips-brgew. " SIR 34606
else.
perform z_unit_conversion
using v_lips-brgew v_lips-gewei c_uom v_palwto.
v_output_dt-d_btgew = v_palwto.
v_output_ag-d_btgew = v_palwto.
v_output_gs-d_btgew = v_palwto. " SIR 34606
endif.
* Get material weight from delivery (LIPS)(IF P_DELWT = 'X')" SIR 38784
if p_delwt = 'X'. " SIR 38784
if v_lips-gewei = c_uom.
v_output_dt-m_brgew = v_lips-brgew.
v_output_ag-m_brgew = v_lips-brgew.
v_output_gs-m_brgew = v_lips-brgew. " SIR 34606
else.
perform z_unit_conversion
using v_lips-brgew v_lips-gewei c_uom v_palwto.
v_output_dt-m_brgew = v_palwto.
v_output_ag-m_brgew = v_palwto.
v_output_gs-m_brgew = v_palwto. " SIR 34606
endif.
else. " SIR 38784
* Get material weight from Master data (MARA) " SIR 38784
read table i_mara1 into v_mara " SIR 38784
with key matnr = v_lips-matnr " SIR 38784
binary search. " SIR 38784
if v_mara-gewei = c_uom. " SIR 38784
v_output_dt-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
v_output_ag-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
v_output_gs-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
else. " SIR 38784
perform z_unit_conversion " SIR 38784
using v_mara-brgew v_mara-gewei c_uom v_palwto. " SIR 38784
v_output_dt-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
v_output_ag-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
v_output_gs-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
endif. " SIR 38784
endif. " SIR 38784
*-------------------------------------------------* Begin of SIR 061880
* To Get the Volume Data.
perform get_volume_data.
*---------------------------------------------------* End of SIR 061880
v_output_dt-num_pallets = v_num_pallets_int.
v_output_ag-num_pallets = v_num_pallets_int.
v_output_gs-num_pallets = v_num_pallets_int. " SIR 34606
v_output_dt-num_cases = v_num_cases_int.
v_output_ag-num_cases = v_num_cases_int.
v_output_gs-num_cases = v_num_cases_int. " SIR 34606
v_output_dt-num_loose = v_loose_qty.
v_output_ag-num_loose = v_loose_qty.
v_output_gs-num_loose = v_loose_qty. " SIR 34606
*{ INSERT D11K901833 1
* Sir 054042/48712 insert code to put in 0 instead of 1 for collect
* value for delivery lines
if v_lips-lgmng = 0.
v_output_dt-num_delln = 0.
v_output_ag-num_delln = 0.
v_output_gs-num_delln = 0.
else.
* end of insert for 054042/48712
*} INSERT
v_output_dt-num_delln = 1.
v_output_ag-num_delln = 1.
v_output_gs-num_delln = 1.Since this is your first post, let me clue you in. This forum is meant for asking very short and specific questions. For example, if you've asked, how could you improve a particular one SELECT statement, I'm sure many people would have helped you.
But you cannot seriously expect someone on this forum to spend his/her time and review such a long program. For this people are normally getting paid, you know. -
Important!! Improve the life and performance of the battery.
Reduce the operating temperature and increase battery life
The battery in your notebook PC is designed to provide the necessary amount of energy for the processor while maintaining HP high safety standards. As a result, the battery may not charge or may stop providing power to the notebook when the battery temperature exceeds the specified, design safety level.
If the battery life appears shorter than normal, the battery stops charging before it is 99%-100% full and the battery appears warmer than usual, the battery has most likely reached its designed "no charge" safety state. The battery will no longer charge until the temperature condition is corrected.
Try one of the following methods to correct the battery temperature:
When charging the battery, do not use applications that require large amounts of system resources such as graphic or memory intensive applications, heavy and extended hard drive usage.
Turn off your notebook and remove the battery to allow it to return to a safe operating temperature.
Make sure the notebook PC is operating on a hard surface. Using the Notebook PC on a bed or sofa may block the vents causing the notebook PC to heat up and shut down.
By taking these steps, the battery will return to its normal operating temperature range and continue to charge and discharge as designed.
Calibrating the battery while PC not in use
Recalibrating the battery requires a cycle of a complete charge and a complete discharge. To recalibrate the battery while using the PC is not is use complete the following steps.
The recalibration may take 1-5 hours depending on the age of the battery and the configuration of the notebook PC you own. The PC should not be used while you perform the following steps. Completing all the following steps will also calibrate the battery so that the power meter readings are accurate.
Shut down the notebook PC
Connect the AC Adapter to the notebook PC and to an electrical socket.
Charge the Notebook PC until the Battery Charge light is Green. This indicates the battery is completely charged.
Press and release the Power Button to start the computer.
Press the F8 key several times when the HP Logo displays.
When the Windows Advanced Startup Menu displays, select the Startup in Safe Mode option.
Remove the AC power adapter from the notebook PC.
Allow the battery to discharge completely until the notebook PC turns off.
The battery is now calibrated and the battery level reading on the power meter is now accurate.
If you are not using the notebook regularly then please unplug the AC adapter and shut down the notebook. By following these practices will improve the life and performance of the battery. Here is a quick list of Do's and Don'ts for the care of your Li-On batteries:
Do's
When you receive a new Notebook or Tablet PC, leave the battery to fully charge overnight.
Condition a new battery by using it until it is fully discharged, and then re-charge it fully. Doing this once a month will help to accurately calibrate your battery.
Always ensure the battery is recharged as soon as possible after it becomes fully discharged. A battery will be permanently damaged if left for an extended length of time in a fully discharged state.
Remember that a Lithium-Ion battery will slowly deteriorate; a new battery will always perform better than one that is 6-months old.
Remember that the battery half-life is rated for a certain total number of charge/discharge cycles (see your User Manual or Quick Start Guide for the rating). For example, a battery that is rated for 3 hours and 500 charge/discharge cycles, will still be considered as within specification, even if it only lasts for 1 hour 45 minutes after 500 charge/discharge cycles.
Heat is the worst enemy of a battery. Allow plenty of air to circulate around the Notebook/Tablet PC, so that the battery is kept as cool as possible when charging and also when in use. If provided, use the integrated 'legs' under the Notebook to raise the notebook and improve air circulation.
Remove the battery if storing for several months (the battery should be at approximately 50% charge or higher).
If you use a NoteBus or if charging your Notebooks or Tablet PCs in a confined space, allow for adequate ventilation in order to keep the batteries as cool as possible.
Don'ts
Do Not - Expose the battery to excessive heat or cold (i.e. outside the range of 10-35 degrees Centigrade ambient).
Do Not - Store the battery in a fully charged state (store batteries with about 50% charge).
Do Not - Allow a nearly flat battery to be unused for more than a month or so. The battery will slowly discharge until it becomes fully discharged and this will permanently damage the battery cells.
Do Not - Charge your Notebook/Tablet PC inside a carry case - the battery may overheat.
Do Not - Charge your Notebook/Tablet PC when stacked on top of each other - the battery may overheat.
Remember: Your battery is slowly degrading all the time, even if it is not used. Keeping your battery as cool as possible will slow down this degradation considerably.
For more information please visit the following links:
How to Improve the Performance of the Battery
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01297640&cc=us&lc=en&dlc=en
10 Tips to make your Laptop Battery last longer
http://labnol.blogspot.com/2006/03/10-tips-to-make-your-laptop-battery.html
Disclaimer: By clicking on the link above, you will be leaving HP.com to visit a web site that is not maintained by HP and where the HP privacy policy does not apply. This link is provided to you for convenience and does not serve as an endorsement by HP of any information or contacts that you may find on this non-HP site.
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||I hope the above article will help you guys..
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||
Maybe you are looking for
-
Defaulting fixed length file fields to 'blank'
Hi, I am currently working on an outbound interface which results in the construction of a fixed length record flat file. At the moment I am having to deal with each field in person to ensure that either a value,or a blank is mapped to the target fie
-
No not as a paper weight I can now watch normal free to air TV on my iPad over my wifi anywhere in range. I bought an Avermedia HD Homefree Duet. You plug your TV antenna into it and connect it to your router via ethernet. The Homefree app is availab
-
How do you get the restrictions off your phone without having to reset it?
I forgot the password to my restrictions code and I don't want to reset my phone just to get the restrictions off.
-
Need help for Oracle forms 10.1.2
Hi , I have installed oracle form 10g application in one of my linux box ( 64 bit) , After bringing up the servers , the system-linux box is getting rebooted automatically . Please help as the Everytime the servers are going down along with the machi
-
Live cache inconsistency for a resource
Hi Gurus, We see that resource is not respecting setup time. When i ran LC consistency , i found that there is LC inconsistency. Please find the below error which we are not able to correct. "Field entries are unequal" Please suggest. This is happeni