Improve your System Performance while using SIEBEL
Take a look at Intel & IBM Machines --> here
To improve ur system performance
Siebel CRM Bookshelf
Regards
Hi Srinivas,
Please refer to my blog posting [/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction|/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction] which gives the details about the package size setting for extractors. I am sure that will be helpful in your case.
Thanks,
Divyesh
Edited by: Divyesh Jain on Jul 20, 2010 8:47 PM
Similar Messages
-
How to improve the load performance while using Datasources for the Invoice
HI All,
How to improve the load performance while using Datasources for the Invoice . Actually my invoice load (Appx. 0.4 M records) is taking very long time nearly ~16 to 18 hrs to update data from R/3 to 0ASA_DS01.
If I load through flat file it will load with in ~20 Min for the same amount of data.
Please suggest how to improve load performance.
PS: I have done the Inpo package settings as per the OSS note.
Regads
Srininivasarao.Namburi.Hi Srinivas,
Please refer to my blog posting [/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction|/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction] which gives the details about the package size setting for extractors. I am sure that will be helpful in your case.
Thanks,
Divyesh
Edited by: Divyesh Jain on Jul 20, 2010 8:47 PM -
Hello Experts,
We are facing an issue like when our Talent specialist are trying to use talent search through their portal they are getting an error like "Error occurred during your search, contact your system administrator" as shown below.
We have checked in our backend and for all the talent specialist search results are showing successfully.
Anyone of you kindly help us to get this sorted out.
Thanks & regards,
SakthiHi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel -
To improve the system performance of the code
Please help me to improve the system performance of the following program. its very urgent
report zsdr0125
no standard page heading
* LINE-SIZE 170 " SIR 061880
line-size 210 " SIR 061880
line-count 58
message-id zz.
** Report header ******************************************************
** Report name: Activity Costing Report
** Report id: RO-01148
** Designed/Coded. Tori Chandler. Reporting Team.
** Date: March 01, 2000.
** Original SIR: 016113
** Application Area: V - Sales & Distribution (OTC)
** Correction/Transport: D10K951579
** Description: It is normal business practice for logistics
** operations to charge business units for the activity
** incurred on their behalf. This is consistent with
** activity based costing principles between BU and
** shared resources. The activities involved are picking
** storage, shipping and receiving. The purpose of this
** report is to provide data for the first 3.
** QRB2 - 03/13/2000 - Tracy, Antoine, Christian, Tori
** History:
* 06/14/2001 SIR 032383 CTS Antoine Dailly
* A plant (WERKS) can have several Distrib points (VSTEL)
* SIGN = 032383
* Modification History:
* Date Modified by SIR CTS Description
*11/14/2001 J.CAMPION 034606 D10K979189 Logistics Activity report
* Logistics Activity reports
* We added fields ship to customer and country and we also make another
* total
* QRB2 Tracy L. Obrien
* Modification History:
* Date Modified by SIR CTS Description
*11/14/2001 J.CAMPION 37838 D10K982890 Select only
* material type HALB
*06/12/2002 T OBrien 38784 D10K988181
* Allow option to get material weight from Master data or
* from the delivery.
* Modified by SIR CTS Date
* Jim Harwood 42730 D10K993119 10 Oct 2002
* Description: Code amended to default the Goods Issue Date range to
* the previous month. Also amended to print out the Select Options.
* Modified by SIR CTS Date
* Jim Harwood 44381 D10K994598 18 Nov 2002
* Description: Correct date range processing. APPEND statement added
* so that record is added ot internal table S_WADAT. Also S_VKORG
* removed as it was NO DISPLAY and nothing was assigned to it. It's use
* in an SQL call may be causing the wrong optimization.
* Modified by SIR CTS Date
* Tori Chandler 45567 D10K995875 03 Jan 2003
* Description: Correct reporting of weights for non-pickable items
* when the Material Master Data radiobutton is selected. Also found
* from SIR 37838, that material type is hardcoded on the LIPS. I
* created a new select option and the person needing the report
* can control if they want only HALB or all line items. Also,
* because of this the delivery weight is obtain from header,
* changing to accumulate from LIPS to match which lines are selected
* QRB2: 1/15/2003: Eileen, Jerome and Tori
*{ INSERT D11K901833 1
* Modified by Sir CTS Date
* Sue Kastan 48712/054042 D11K901833 28 Aug, 2003
* Fix overcounting of records from LIPS
*} INSERT
* Modified by SIR CTS Date *
* Vijay Andea 061880 D11K918628 04/20/2006 *
* D11K946194 *
* Description: Enhence ZSDR0125 Activity Cost Driver Report to allow *
* Analysis by Product Groupings. *
*} INSERT
* Modified by SIR CTS Date *
* Prakash Arunachalam 091510 D11K950288 09/26/2006 *
* Description: Correct Activity Cost report - material weight *
* calculation *
* Modified by SIR CTS Date *
* Murali Krishna 301978 D50K903293 01/20/2008
* Description: Improve the system performance of this report and
* clean-up of code into various form routine
* Table declaration.
tables: likp, " SD Document: Delivery Header Data
lips, " SD document: Delivery: Item data
vepo, " SD Document: Shipping Unit Item (Content)
vekp, " SD Document: Shipping Unit Header
knvv, " Customer Master Sales Data
kna1, " General Data in Customer Master SIR 34606
marm, " Units of Measure
mara, " Material Master: General Data SIR 38784
t001l, " Stge locs
t001k, " Valuation area
tvswz, " Shipping Points per Plant
t134, " Material types
z0234. " Alternative Unit of Measure
*** Selection screen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_werks like t001l-werks obligatory memory id wrk.
select-options: s_lgort for t001l-lgort,
* S_VKORG FOR TVKO-VKORG NO-DISPLAY ," SIR 34606, 42730
* S_WADAT FOR LIKP-WADAT_IST OBLIGATORY NO-EXTENSION,
s_wadat for likp-wadat_ist no-extension, " SIR 42730
s_mtart for t134-mtart, " SIR 45567
s_lfart for likp-lfart no-display no intervals.
selection-screen skip 2.
selection-screen comment 1(21) text-002. " SIR 38784
parameters: p_delwt radiobutton group grp1, " SIR 38784
p_mstwt radiobutton group grp1. " SIR 38784
*--------------------------------------------------*Start of SIR 061880
selection-screen skip 2.
selection-screen comment 1(21) text-006.
parameters: p_voldl radiobutton group 2, " Volume from Delivery
p_volmd radiobutton group 2. " Volume from Master Data
*-----------------------------------------------------End of SIR 061880
selection-screen end of block b1.
*--------------------------------------------------*Start of SIR 061880
selection-screen begin of block b2 with frame title text-007.
select-options: s_cbuun for knvv-kvgr1 no intervals, " Customer BU
s_mbuun for mara-prdha+1(2) no intervals, " Material BU
s_lobus for mara-prdha+3(3) no intervals, " LOB
s_pac1 for mara-prdha+6(3) no intervals. " PAC1
selection-screen end of block b2.
*----------------------------------------------------*End of SIR 061880
*---Type Declaration for Internal Tables------------------------------*
types: begin of t_likp,
vbeln like likp-vbeln, " delivery
vstel like likp-vstel, " shipping point
lfart like likp-lfart, " delivery type
vkorg like likp-vkorg, " Sales organization
kunag like likp-kunag, " sold-to party
kunnr like likp-kunnr, " ship to party SIR 34606
btgew like likp-btgew, " Delivery weight
gewei like likp-gewei, " Unit of weight
anzpk like likp-anzpk, " Number of Packages SIR 61880
volum like likp-volum, " Delivery Volume SIR 61880
voleh like likp-voleh, " Volume Unit SIR 61880
vtwiv like likp-vtwiv, " Distribution channel
spaiv like likp-spaiv, " Division
wadat_ist like likp-wadat_ist, " actual goods issue date
del_flg(1) type c, "(+) SIR 301978
end of t_likp.
types: begin of t_lips,
vbeln like lips-vbeln, " delivery
posnr like lips-posnr, " delivery line
matnr like lips-matnr, " material
lgort like lips-lgort, " storage location
prodh like lips-prodh, " product hierarchy
meins like lips-meins, " base UoM
brgew like lips-brgew, " Material weight
gewei like lips-gewei, " Unit of weight
volum like lips-volum, " Material Volume SIR 61880
voleh like lips-voleh, " Volume Unit SIR 61880
lgmng like lips-lgmng, " actual delivery quantity
komkz like lips-komkz, " Indicator for picking control
mtart like lips-mtart, " Material type " SIR 37838
del_flg(1) type c, "(+) SIR 301978
end of t_lips.
types: begin of t_vepo,
venum like vepo-venum, " shipping unit number
vbeln like vepo-vbeln, " delivery
end of t_vepo.
types: begin of t_vekp,
venum like vekp-venum, " shipping unit number
brgew like vekp-brgew, " actual weight
gewei_max like vekp-gewei_max, " unit of weight
vpobjkey like vekp-vpobjkey, " key for assigned object
end of t_vekp.
types: begin of t_knvv,
kunnr like knvv-kunnr, " customer number
ktgrd like knvv-ktgrd, " acct assign group
kvgr1 like knvv-kvgr1, " customer group 1
end of t_knvv.
types: begin of t_kna1, " SIR 34606
kunnr like kna1-kunnr, " customer number " SIR 34606
land1 like kna1-land1, " contry " SIR 34606
end of t_kna1. " SIR 34606
types: begin of t_marm,
matnr like marm-matnr, " material
meinh like marm-meinh, " Alt unit of measure 032383
umrez like marm-umrez, " numerator
umren like marm-umren, " denominator
end of t_marm.
types: begin of t_mara, " SIR 38784
matnr like mara-matnr, " material " SIR 38784
prdha like mara-prdha, " Product Hierarchy " SIR 61880
brgew like lips-brgew, " gross weight " SIR 38784
gewei like mara-gewei, " Unit of weight " SIR 38784
volum like mara-volum, " Volume " SIR 61880
voleh like mara-voleh, " Volume Unit " SIR 61880
del_flg(1) type c, "(+) SIR 301978
end of t_mara. " SIR 38784
types: begin of t_tvswz,
vstel like tvswz-vstel, " shipping point
end of t_tvswz.
types: begin of t_z0234, "032383
vstel like z0234-vstel, " shipping point 032383
zpaluom like z0234-zpaluom," pallet unit of measure 032383
zcsuom like z0234-zcsuom," Case unit of measure 032383
end of t_z0234. "032383
types: begin of t_output_dt,
wadat_ist like likp-wadat_ist, " Goods issue date
ktgrd like knvv-ktgrd," acct assign group
bu like knvv-kvgr1," business unit
kunnr like kna1-kunnr," ship to location SIR 34606
land1 like kna1-land1," ship to location SIR 34606
d_btgew like likp-btgew," delivery weight
m_brgew like lips-brgew," material weight
a_brgew like vekp-brgew," actual weight of ship unit
num_del type i, " counter of deliveries
num_pallets type i, " number of pallets
num_cases type i, " number of cases
num_loose type i, " loose quantity
num_delln type i, " counter of delivery lines
* packages like likp-anzpk," Number of Packages " SIR 61880
packages(3) type p, " Number of Packages " SIR 61880
volume like lips-volum," Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_dt.
types: begin of t_output_ag,
ktgrd like knvv-ktgrd," acct assign group
bu like knvv-kvgr1," business unit
land1 like kna1-land1," country SIR 34606
d_btgew like likp-btgew," delivery weight
m_brgew like lips-brgew," material weight
a_brgew like vekp-brgew," actual weight of ship unit
num_del type i, " counter of deliveries
num_pallets type i, " number of pallets
num_cases type i, " number of cases
num_loose type i, " loose quantity
num_delln type i, " counter of delivery lines
* packages like likp-anzpk," Number of Packages " SIR 61880
packages(3) type p, " Number of Packages " SIR 61880
volume like lips-volum," Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_ag.
types: begin of t_output_gs, " SIR 34606
ktgrd like knvv-ktgrd," acct assign group " SIR 34606
bu like knvv-kvgr1," business unit " SIR 34606
d_btgew like likp-btgew," delivery weight " SIR 34606
m_brgew like lips-brgew," material weight " SIR 34606
a_brgew like vekp-brgew," actual weight " SIR 34606
num_del type i, " counter of deliv " SIR 34606
num_pallets type i, " number of pallets " SIR 34606
num_cases type i, " number of cases " SIR 34606
num_loose type i, " loose quantity " SIR 34606
num_delln type i, " counter of deliv " SIR 34606
* packages like likp-anzpk, " Number of Package " SIR 61880
packages(3) type p, " Number of Packages" SIR 61880
volume like lips-volum, " Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_gs. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* Material Type
types: begin of t_mtart,
mtart like t134-mtart, " Material Type
end of t_mtart.
* Customer Business Unit.
types: begin of t_kvgr1,
kvgr1 like knvv-kvgr1, " Customer Group 1
end of t_kvgr1.
* sales Organization.
types: begin of t_lgort,
lgort like t001l-lgort, " Sales Organization
end of t_lgort.
* Begin of SIR 301978
* Header: Material Document
types: begin of t_mkpf,
vgart type mkpf-vgart,
xblnr type likp-vbeln,
end of t_mkpf.
* End of SIR 301978
*---------------------------------------------------* End of SIR 061880
*---Internal Tables---------------------------------------------------*
data: i_likp type t_likp occurs 0 with header line,
i_temp_likp type t_likp occurs 0 with header line,
v_likp type t_likp,
i_lips type t_lips occurs 0 with header line,
i_temp_lips type t_lips occurs 0 with header line,
v_lips type t_lips,
i_vepo type t_vepo occurs 0,
* V_VEPO TYPE T_VEPO,
i_vekp type t_vekp occurs 0,
v_vekp type t_vekp,
i_knvv type t_knvv occurs 0 with header line,
v_knvv type t_knvv,
i_kna1 type t_kna1 occurs 0, " SIR 34606
v_kna1 type t_kna1, " SIR 34606
i_z0234 type t_z0234 occurs 0, " 032383
v_z0234 type t_z0234, " 032383
i_z0234_uom type t_z0234 occurs 0, " 032383
v_z0234_uom type t_z0234, " 032383
i_marm type t_marm occurs 0 with header line," SIR 61880
i_marm_pallet type t_marm occurs 0 with header line,
v_marm_pallet type t_marm,
i_marm_case type t_marm occurs 0 with header line,
v_marm_case type t_marm,
*-------------------------------------------------* Begin of SIR 061880
* I_MARA TYPE T_MARA OCCURS 0, " SIR 38784
i_mara1 type t_mara occurs 0 with header line,
i_mtart type t_mtart occurs 0 with header line,
i_kvgr1 type t_kvgr1 occurs 0 with header line,
i_lgort type t_lgort occurs 0 with header line,
v_kvgr1 type t_kvgr1,
*---------------------------------------------------* End of SIR 061880
v_mara type t_mara, " SIR 38784
i_tvswz type t_tvswz occurs 0,
v_tvswz type t_tvswz, "(+) SIR 301978
i_output_dt type t_output_dt occurs 0,
v_output_dt type t_output_dt,
i_output_ag type t_output_ag occurs 0,
v_output_ag type t_output_ag,
i_output_gs type t_output_gs occurs 0, " SIR 34606
v_output_gs type t_output_gs, " SIR 34606
i_mkpf type table of t_mkpf with header line."SIR 301978
*** Data Declarations *
data: v_page(3) type c, " Page Counter
v_comp like t001k-bukrs, " zbsn0001 company code
v_title(24) type c, " zbsn0001 report title
v_rpttyp type c, " report type
v_ok type c, " control While... endwhile
v_diff_date type p, " days between selection
v_werks like t001l-werks, " plant
* v_z0234_zpaluom like z0234-zpaluom, " Pallet Unit of Measure
* v_z0234_zcsuom like z0234-zcsuom, " Case Unit of Measure
v_palwto type p decimals 6, " SIR 091510
* "like likp-btgew, " Weight after conversion
v_vekp_tabix like sy-tabix, " index on read
v_vekp_sum_brgew like vekp-brgew, " actual weight
v_pallet_qty like lips-lgmng, " calculated pallet qty
v_pallet_integer type i, " true pallet qty
v_case_qty like lips-lgmng, " calculated case qty
v_case_integer type i, " true case qty
v_qty_not_pallets like lips-lgmng, " calculated
v_num_pallets like lips-lgmng, " calculated nbr of pallets
v_num_pallets_int type i, " true nbr of pallets
v_num_cases like lips-lgmng, " calculated nbr of cases
v_num_cases_int type i, " true nbr of cases
v_total_case_qty like lips-lgmng, " case quantity
v_loose_qty type i, " calculated loose quantity
*-------------------------------------------------* Begin of SIR 061880
v_volume like lips-volum, " Volume After Convertion
v_cbuun like knvv-kvgr1, " Customer BU
v_mbuun like knvv-kvgr1, " Material BU
v_lobus(3) type c, " Line of Business
v_pac1(3) type c, " PAC1
v_flag type c. " Flag Indicator for No Data
*---------------------------------------------------* End of SIR 061880
* Begin of SIR 301978
* Ranges
ranges : r_vstel for tvswz-vstel.
* End of SIR 301978
* Constants
data: c_uom(3) type c value 'KG'. " Kilogram Unit of Meas.
data : c_vom like mara-voleh value 'M3'. " Metter Cube. " SIR 061880
constants : c_wl(2) type c value 'WL'. "(+) SIR 301978
* Initialization.
initialization.
s_lfart-sign = 'I'.
s_lfart-option = 'EQ'.
s_lfart-low = 'LF '.
append s_lfart.
s_lfart-low = 'NL '.
append s_lfart.
s_lfart-low = 'NLCC'.
append s_lfart.
s_lfart-low = 'ZLFI'.
append s_lfart.
* AT SELECTION-SCREEN.
at selection-screen.
* SIR 42730 - If no Goods Issue Date has been specified in the
* Select Options set the range to the previous month.
if s_wadat-low is initial.
s_wadat-sign = 'I'.
s_wadat-option = 'BT'.
s_wadat-high = sy-datum. " Today's date
s_wadat-high+6(2) = '01'. " First of this month
s_wadat-high = s_wadat-high - 1. " End of last month
s_wadat-low = s_wadat-high. " End of last month
s_wadat-low+6(2) = '01'. " First of last month
append s_wadat.
endif. " SIR 42730 IF S_WADAT-LOW IS INITIAL.
clear v_werks. "(+) SIR 301978
* Validate Plant/Storage Location from selection screen
select werks up to 1 rows into v_werks from t001l
where werks = p_werks and
lgort in s_lgort.
endselect.
if sy-subrc ne 0.
message e045 with text-e01.
endif.
* Validate Storage Location
if not s_lgort[] is initial.
select lgort from t001l into table i_lgort where lgort in s_lgort.
if sy-subrc ne 0.
message e045 with text-e09.
endif.
endif.
* Validate date range. do not allow more that 31 days
if not s_wadat-high is initial.
v_diff_date = s_wadat-high - s_wadat-low.
if v_diff_date >= '31'.
message e045 with text-e02.
endif.
endif.
*-------------------------------------------------* Begin of SIR 061880
* Validation for Material Type in Selection Screen
if not s_mtart[] is initial.
select mtart from t134 into table i_mtart where mtart in s_mtart.
if sy-subrc ne 0.
message e045 with text-e07.
endif.
endif.
at selection-screen on block b2.
* Validation for Material Business Unit and Customer Business Unit.
if s_cbuun-low is not initial and s_mbuun-low is not initial.
message e045 with text-e05.
endif.
* Validation for Possible combinations of Material BU, Line of Business
* and PAC1
if ( s_mbuun-low is not initial and s_lobus-low is not initial
and s_pac1-low is not initial )
or ( s_mbuun-low is not initial and s_lobus-low is not initial )
or ( s_lobus-low is not initial and s_pac1-low is not initial )
or ( s_mbuun-low is not initial and s_pac1-low is not initial ).
message e045 with text-e06.
endif.
* Validation for Customer Business Unit.
if not s_cbuun[] is initial.
select kvgr1 from tvv1 into table i_kvgr1 where kvgr1 in s_cbuun.
if sy-subrc ne 0.
message e045 with text-e08.
endif.
* free: i_kvgr1.
endif.
*---------------------------------------------------- End of SIR 061880
* TOP-OF-PAGE
* Top of the page routine to print the headers and columns
top-of-page.
format color col_heading on.
if v_rpttyp = 'D'.
v_title = text-h01.
else.
v_title = text-h02.
endif.
perform zbsn0001_standard_header " Standard Report Heading Form
using v_comp v_title 'U' v_page.
skip.
if v_rpttyp = 'D'.
perform write_dtlvl_headings.
else.
perform write_aglvl_headings.
endif.
* FORM WRITE_DTLVL_HEADINGS *
* for date detail level, print the column headers *
form write_dtlvl_headings.
write: /001 text-h03, " Acct
038 text-h04, " ------ P I C K I N G ------
105 text-h05, " ----- S H I P P I N G -----
/001 text-h06, " Group
007 text-h07, " Date
017 text-h08, " BU
021 text-h17, " ship to party 34606
030 text-h18, " country
039 text-h09, " Pallets
057 text-h10, " Cases
075 text-h11, " Loose
093 text-h12, " Lines
105 text-h13, " Material Kg
124 text-h16, " Delivery Kg
143 text-h14, " Actual Kg
161 text-h15, " Deliveries
*----------------------------------------------------Start of SIR 61880
173 text-h20, " Packages
189 text-h21, " Volume
201 text-h22, " LOB
207 text-h23. " PAC1
*-----------------------------------------------------*End of SIR 61880
skip.
endform. " end of write_dtlvl_headings.
* FORM WRITE_AGLVL_HEADINGS *
* for account group detail level, print the column headers *
form write_aglvl_headings.
write: /001 text-h03, " Acct
038 text-h04, " ------ P I C K I N G ------
105 text-h05, " ----- S H I P P I N G -----
/001 text-h06, " Group
017 text-h08, " BU
030 text-h18, " country SIR 34606
039 text-h09, " Pallets
057 text-h10, " Cases
075 text-h11, " Loose
093 text-h12, " Lines
105 text-h13, " Material Kg
124 text-h16, " Delivery Kg
143 text-h14, " Actual Kg
161 text-h15, " Deliveries
*---------------------------------------------------*Start of SIR 61880
173 text-h20, " Packages
189 text-h21, " Volume
201 text-h22, " LOB
207 text-h23. " PAC1
*-----------------------------------------------------*End of SIR 61880
skip.
endform. " end of write_aglvl_headings.
*-------------------------- SUBBROUTINES -----------------------------*
include zbsn0001. " Include to print all Standard Report Titles
include zsdn0004. " Print the Select Options
*** MAIN SELECTION. *
start-of-selection.
refresh: i_likp, i_temp_likp, i_lips, i_temp_lips, i_vepo,
i_vekp, i_knvv, i_marm_pallet, i_marm_case, i_tvswz,
i_output_dt, i_output_ag, i_mara1.
clear: v_likp, v_lips, v_vekp, v_knvv, v_mara,
v_marm_pallet, v_marm_case, v_output_dt, v_output_ag.
v_rpttyp = 'D'.
* SIR 42730 - Echo the Select Options to the output listing and print
* the Goods Issue Date range being used.
write: /,/. " SIR 43730 - Skip a couple of lines to centre it.
perform zsdn0004_print_select_options using sy-cprog ' '.
if s_wadat-high is initial.
write: /,/, text-003, 34 s_wadat-low.
else.
write: /,/, text-003, 34 s_wadat-low, 44 text-004, 47 s_wadat-high.
endif.
new-page.
* Main Processing. *
perform get_data.
if not i_lips[] is initial.
perform create_output.
endif.
* END-OF-SELECTION
end-of-selection.
*-------------------------------------------------* Start of SIR 061880
* PERFORM WRITE_REPORT.
if not i_output_dt[] is initial and not i_output_ag[] is initial and
not i_output_gs[] is initial.
perform write_report.
else.
skip 2.
write:/ text-e03.
skip 2.
uline.
clear: v_flag.
endif.
*---------------------------------------------------* End of SIR 061880
* FORM GET_DATA *
* build all of the internal tables needed for the report *
* selects on t001k, z0234, likp, lips, vepo, vekp, knvv & marm, mara *
form get_data.
perform get_data_t001k. " SIR 301978
perform get_data_tvswz. " SIR 301978
if sy-subrc = 0. " Build shipping point range
perform get_data_Z0234. " SIR 301978
if sy-subrc ne 0.
v_flag = 'X'.
* stop.
else.
sort i_z0234 by vstel. " 032383
endif.
* Begin of SIR 301978
* The data retrievalfrom LIKP has been modified for performance
* reasons
perform get_data_mkpf. " SIR 301978
if sy-subrc eq 0.
* Deleting data other than Goods issued for delivery
delete i_mkpf where vgart ne c_wl.
sort i_mkpf by xblnr.
endif.
* Deleting the data from the internal table i_likp by comparing
* shipping point
r_vstel-sign = 'I'.
r_vstel-option = 'EQ'.
clear : v_tvswz.
loop at i_tvswz into v_tvswz.
r_vstel-low = v_tvswz-vstel.
append r_vstel.
endloop.
if not i_mkpf[] is initial.
perform get_data_likp. " SIR 301978
endif.
if sy-subrc = 0.
delete i_likp where not lfart in s_lfart.
* End of SIR 301978
* Get data for the delivery lines
if not i_likp[] is initial.
perform get_data_lips. " SIR 301978
* Begin of SIR 301978
if i_lips[] is initial.
v_flag = 'X'.
message i089 with text-i02.
leave list-processing.
endif. " Return code for LIPS select
* End of SIR 301978
endif.
*-------------------------------------------------* Begin of SIR 061880
* Get Data From MARA (Material Master) to Read Material Weight and
* Material Voluem from Master Data.
if not i_lips[] is initial.
* Begin of SIR 301978
* Delete the duplicate material from delivery item table
i_temp_lips[] = i_lips[].
sort i_temp_lips by matnr.
delete adjacent duplicates from i_temp_lips comparing matnr.
perform get_data_mara. " SIR 301978
if sy-subrc = 0.
sort i_mara1 by matnr.
clear i_temp_lips.
refresh i_temp_lips.
* End of SIR 301978
else.
v_flag = 'X'.
message i089 with text-i01.
leave list-processing.
endif.
endif.
* Filter I_LIPS and I_MARA1 When Either material BU or Line of
* Business (LOB) or PAC1 are not left Balnk
perform filter_data_for_prdha.
* Get data for the sold-to customer
perform i_knvv_fill_data.
* Filter I_LIKP & I_LIPS & I_MARA for Cust-BU, When Cust-Bu is not
* left Blank.
perform filter_likp_lips_mara_custbu.
*---------------------------------------------------- End of SIR 061880
*-------------------------------------------------* Begin of SIR 034606
* Get data for the ship to party
i_temp_likp[] = i_likp[].
sort i_temp_likp by kunnr.
delete adjacent duplicates from i_temp_likp comparing kunnr.
perform get_data_kna1. " SIR 301978
if sy-subrc = 0.
sort i_kna1 by kunnr.
endif.
*---------------------------------------------------* End of SIR 034606
else.
v_flag = 'X'.
message i089 with text-i04.
leave list-processing.
endif. " return code to LIKP select
* endif. " SIR 061880
free: i_temp_likp.
endif. " return code for TVSWZ select
* Process table LIPS
if not i_lips[] is initial.
i_temp_lips[] = i_lips[].
sort i_temp_lips by vbeln.
delete adjacent duplicates from i_temp_lips comparing vbeln.
* Get actual weight
perform get_data_vepo. " SIR 301978
if sy-subrc = 0.
sort i_vepo by venum.
delete adjacent duplicates from i_vepo comparing venum.
perform get_data_vekp. " SIR 301978
sort i_vekp by vpobjkey.
endif.
free: i_vepo, i_temp_lips.
i_temp_lips[] = i_lips[].
sort i_temp_lips by matnr.
delete adjacent duplicates from i_temp_lips comparing matnr.
* Get Units of Measure for Material
perform read_data_from_marm. " SIR 061880
* Begin of SIR 032383
i_z0234_uom = i_z0234.
sort i_z0234_uom by zpaluom.
delete adjacent duplicates from i_z0234_uom comparing zpaluom.
* End of SIR 032383
clear i_marm_pallet. " SIR 061880
refresh i_marm_pallet. " SIR 061880
loop at i_z0234_uom into v_z0234_uom. "LOOP Z0234 032383
*-------------------------------------------------* Begin of SIR 061880
* Get Alternative Unit of Measure for Pallets
perform i_marm_pallet_fill.
endloop. "ENDLOOP Z0234 032383
** get alternative UoM for pallets
* SELECT MATNR " material
* MEINH " Alt unit of measure " 032383
* UMREZ " numerator
* UMREN " denominator
** into table i_marm_pallet " 032383
* APPENDING TABLE I_MARM_PALLET "032383
* FROM MARM
* FOR ALL ENTRIES IN I_TEMP_LIPS
* WHERE MATNR = I_TEMP_LIPS-MATNR AND
** meinh = v_z0234_zpaluom. " 032383
* MEINH = V_Z0234_UOM-ZPALUOM. " 032383
*---------------------------------------------------* End of SIR 061880
sort i_marm_pallet by matnr meinh.
free i_z0234_uom. "032383
i_z0234_uom = i_z0234. "032383
sort i_z0234_uom by zcsuom. "032383
delete adjacent duplicates from i_z0234_uom comparing zcsuom."32383
clear i_marm_case. " SIR 061880
refresh i_marm_case. " SIR 061880
loop at i_z0234_uom into v_z0234_uom. "LOOP Z0234 032383
*-------------------------------------------------* Begin of SIR 061880
* Get Alternative Unit of Measure for Cases
perform i_marm_case_fill.
endloop. "ENDLOOP Z0234 032383
*---------------------------------------------------* End of SIR 061880
sort i_marm_case by matnr meinh.
else.
v_flag = 'X'.
message i089 with text-i02.
* leave list-processing.
endif. " table LIPS is empty
endform. " get_data
* FORM CREATE_OUTPUT *
* process internal table LIPS, for each delivery/delivery lines create*
* an output record and collect into i_output internal table. Fields *
* used for header are goods issue date, acct assign, BU for customer, *
* total weight, total weight for shipping unit and count of *
* deliveries, the remaining fields will have a value of zero for the *
* collect. For each delivery line, fields used are goods issue date, *
* acct assign, BU for material, number of pallets, number of cases, *
* loose quantity and number of delivery lines. The remaining header *
* fiels will be zero for the collect. *
form create_output.
*-------------------------------------------------* Begin of SIR 061880
sort i_mara1 by matnr.
sort i_lips by vbeln posnr matnr.
sort i_likp by vbeln.
sort i_z0234 by vstel.
sort i_knvv by kunnr.
sort i_kna1 by kunnr.
sort i_vekp by vpobjkey.
sort i_marm_pallet by matnr meinh.
sort i_marm_case by matnr meinh.
* LOOP AT I_LIPS INTO V_LIPS.
loop at i_lips.
clear v_lips.
v_lips = i_lips.
*---------------------------------------------------* End of SIR 061880
at new vbeln.
perform collect_header_data.
endat.
if not v_lips-komkz is initial. " SIR 45567
perform collect_item_data.
endif. " SIR 45567
endloop.
endform. " create_output
* FORM COLLECT_HEADER_DATA *
* Fields used for header are goods issue date, acct assign, *
* BU for customer, total weight, total weight for shipping unit *
* and count ofdeliveries, the remaining fields will have a value of *
* zero for the collect. *
form collect_header_data.
clear: v_likp, v_knvv, v_vekp, v_vekp_sum_brgew.
v_ok = 'Y'.
read table i_likp into v_likp with key vbeln = v_lips-vbeln
binary search.
if sy-subrc = 0. " SIR 061880
clear v_z0234. "(+) SIR 301978
read table i_z0234 into v_z0234 "32383
with key vstel = v_likp-vstel "32383
binary search. "32383
read table i_knvv into v_knvv with key kunnr = v_likp-kunag
binary search.
if sy-subrc ne 0.
select single ktgrd kvgr1 into (v_knvv-ktgrd, v_knvv-kvgr1)
from knvv where kunnr = v_likp-kunag and
vkorg = v_likp-vkorg and
vtweg = '01' and " intercompany values
spart = '01'. " intercompany values
endif.
clear v_kna1. " SIR 34606
read table i_kna1 into v_kna1 " SIR 34606
with key kunnr = v_likp-kunnr " SIR 34606
binary search. " SIR 34606
read table i_vekp into v_vekp
with key vpobjkey(10) = v_likp-vbeln
binary search.
if sy-subrc = 0.
v_vekp_tabix = sy-tabix.
while v_ok = 'Y'.
if v_vekp-gewei_max ne c_uom.
perform z_unit_conversion
using v_vekp-brgew v_vekp-gewei_max c_uom v_palwto.
v_vekp_sum_brgew = v_vekp_sum_brgew + v_palwto.
else.
v_vekp_sum_brgew = v_vekp_sum_brgew + v_vekp-brgew.
endif.
v_vekp_tabix = v_vekp_tabix + 1.
read table i_vekp into v_vekp
index v_vekp_tabix.
if sy-subrc = 0.
if v_vekp-vpobjkey(10) ne v_likp-vbeln.
v_ok = 'N'.
endif.
else.
v_ok = 'N'.
endif.
endwhile.
endif.
endif. " SIR 061880
* populate output tables
clear: v_output_dt, v_output_ag,v_output_gs. " SIR 34606
v_output_dt-wadat_ist = v_likp-wadat_ist.
v_output_dt-ktgrd = v_knvv-ktgrd.
v_output_ag-ktgrd = v_knvv-ktgrd.
v_output_gs-ktgrd = v_knvv-ktgrd. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* V_OUTPUT_DT-BU = V_KNVV-KVGR1.
* V_OUTPUT_AG-BU = V_KNVV-KVGR1.
* V_OUTPUT_GS-BU = V_KNVV-KVGR1. " SIR 34606
* Populate Business Unit,Line of Busness and PAC1 Values in Header Data
perform get_busunit_lobus_pac1_data1.
*---------------------------------------------------* End of SIR 061880
v_output_dt-kunnr = v_kna1-kunnr. " SIR 34606
* V_OUTPUT_AG-KUNNR = V_KNA1-KUNNR. " SIR 34606
v_output_dt-land1 = v_kna1-land1. " SIR 34606
v_output_ag-land1 = v_kna1-land1. " SIR 34606
v_output_dt-a_brgew = v_vekp_sum_brgew.
v_output_ag-a_brgew = v_vekp_sum_brgew.
v_output_gs-a_brgew = v_vekp_sum_brgew. " SIR 34606
if s_mbuun[] is initial and " SIR 61880
s_lobus[] is initial and " SIR 61880
s_pac1[] is initial. " SIR 61880
v_output_dt-num_del = 1.
v_output_ag-num_del = 1.
v_output_gs-num_del = 1. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* Number of Packages
v_output_dt-packages = v_likp-anzpk.
v_output_ag-packages = v_likp-anzpk.
v_output_gs-packages = v_likp-anzpk.
else.
clear: v_output_dt-num_del,
v_output_ag-num_del,
v_output_gs-num_del,
v_output_dt-packages,
v_output_ag-packages,
v_output_gs-packages.
endif.
*---------------------------------------------------* End of SIR 061880
collect v_output_dt into i_output_dt.
collect v_output_ag into i_output_ag.
collect v_output_gs into i_output_gs. " SIR 34606
endform. " collect_header_data
* FORM COLLECT_ITEM_DATA *
* For each delivery line, fields used are goods issue date, *
* acct assign, BU for material, number of pallets, number of cases, *
* loose quantity and number of delivery lines. The remaining header *
* fiels will be zero for the collect. *
form collect_item_data.
clear: v_pallet_qty, v_pallet_integer,
v_case_qty, v_case_integer,
v_num_pallets, v_num_pallets_int,
v_num_cases, v_num_cases_int,
v_qty_not_pallets, v_total_case_qty, v_loose_qty.
read table i_marm_pallet into v_marm_pallet
with key matnr = v_lips-matnr
meinh = v_z0234-zpaluom binary search."32382
if sy-subrc = 0.
v_pallet_qty = v_marm_pallet-umrez / v_marm_pallet-umren.
* round down partial pallets
v_pallet_integer = v_pallet_qty - '.499'.
endif.
read table i_marm_case into v_marm_case
with key matnr = v_lips-matnr
meinh = v_z0234-zcsuom binary search."32382
if sy-subrc = 0.
v_case_qty = v_marm_case-umrez / v_marm_case-umren.
* round down partial cases
v_case_integer = v_case_qty - '.499'.
endif.
if v_pallet_integer > 0.
v_num_pallets = v_lips-lgmng / v_pallet_integer.
v_num_pallets_int = v_num_pallets - '.499'.
endif.
v_qty_not_pallets = v_lips-lgmng -
( v_num_pallets_int * v_pallet_integer ).
if v_case_integer > 0.
v_num_cases = v_qty_not_pallets / v_case_integer.
v_num_cases_int = v_num_cases - '.499'.
endif.
v_total_case_qty = v_num_cases_int * v_case_integer.
if v_qty_not_pallets = v_total_case_qty.
v_loose_qty = 0.
else.
v_loose_qty = 1.
endif.
* populate output tables
clear: v_output_dt, v_output_ag, v_output_gs. " SIR 34606
v_output_dt-wadat_ist = v_likp-wadat_ist.
v_output_dt-ktgrd = v_knvv-ktgrd.
v_output_ag-ktgrd = v_knvv-ktgrd.
v_output_gs-ktgrd = v_knvv-ktgrd. " SIR 34606
v_output_dt-kunnr = v_kna1-kunnr. " SIR 34606
* V_OUTPUT_AG-KUNNR = V_KNA1-KUNNR. " SIR 34606
v_output_dt-land1 = v_kna1-land1. " SIR 34606
v_output_ag-land1 = v_kna1-land1. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* V_OUTPUT_DT-BU = V_LIPS-PRODH+1(2).
* V_OUTPUT_AG-BU = V_LIPS-PRODH+1(2).
* V_OUTPUT_GS-BU = V_LIPS-PRODH+1(2). " SIR 34606
* Populate Business Unit,Line of Business and PAC1 Values for Item Data.
perform get_busunit_lobus_pac1_data2.
if V_OUTPUT_DT-BU is initial.
clear V_OUTPUT_DT.
exit.
endif.
*---------------------------------------------------* End of SIR 061880
* get delivery weight from delivery lines instead of header " SIR 45567
if v_lips-gewei = c_uom.
v_output_dt-d_btgew = v_lips-brgew.
v_output_ag-d_btgew = v_lips-brgew.
v_output_gs-d_btgew = v_lips-brgew. " SIR 34606
else.
perform z_unit_conversion
using v_lips-brgew v_lips-gewei c_uom v_palwto.
v_output_dt-d_btgew = v_palwto.
v_output_ag-d_btgew = v_palwto.
v_output_gs-d_btgew = v_palwto. " SIR 34606
endif.
* Get material weight from delivery (LIPS)(IF P_DELWT = 'X')" SIR 38784
if p_delwt = 'X'. " SIR 38784
if v_lips-gewei = c_uom.
v_output_dt-m_brgew = v_lips-brgew.
v_output_ag-m_brgew = v_lips-brgew.
v_output_gs-m_brgew = v_lips-brgew. " SIR 34606
else.
perform z_unit_conversion
using v_lips-brgew v_lips-gewei c_uom v_palwto.
v_output_dt-m_brgew = v_palwto.
v_output_ag-m_brgew = v_palwto.
v_output_gs-m_brgew = v_palwto. " SIR 34606
endif.
else. " SIR 38784
* Get material weight from Master data (MARA) " SIR 38784
read table i_mara1 into v_mara " SIR 38784
with key matnr = v_lips-matnr " SIR 38784
binary search. " SIR 38784
if v_mara-gewei = c_uom. " SIR 38784
v_output_dt-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
v_output_ag-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
v_output_gs-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
else. " SIR 38784
perform z_unit_conversion " SIR 38784
using v_mara-brgew v_mara-gewei c_uom v_palwto. " SIR 38784
v_output_dt-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
v_output_ag-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
v_output_gs-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
endif. " SIR 38784
endif. " SIR 38784
*-------------------------------------------------* Begin of SIR 061880
* To Get the Volume Data.
perform get_volume_data.
*---------------------------------------------------* End of SIR 061880
v_output_dt-num_pallets = v_num_pallets_int.
v_output_ag-num_pallets = v_num_pallets_int.
v_output_gs-num_pallets = v_num_pallets_int. " SIR 34606
v_output_dt-num_cases = v_num_cases_int.
v_output_ag-num_cases = v_num_cases_int.
v_output_gs-num_cases = v_num_cases_int. " SIR 34606
v_output_dt-num_loose = v_loose_qty.
v_output_ag-num_loose = v_loose_qty.
v_output_gs-num_loose = v_loose_qty. " SIR 34606
*{ INSERT D11K901833 1
* Sir 054042/48712 insert code to put in 0 instead of 1 for collect
* value for delivery lines
if v_lips-lgmng = 0.
v_output_dt-num_delln = 0.
v_output_ag-num_delln = 0.
v_output_gs-num_delln = 0.
else.
* end of insert for 054042/48712
*} INSERT
v_output_dt-num_delln = 1.
v_output_ag-num_delln = 1.
v_output_gs-num_delln = 1.Since this is your first post, let me clue you in. This forum is meant for asking very short and specific questions. For example, if you've asked, how could you improve a particular one SELECT statement, I'm sure many people would have helped you.
But you cannot seriously expect someone on this forum to spend his/her time and review such a long program. For this people are normally getting paid, you know. -
How to use Operating System Commands while using define in sqlplus
How to use Operating System Commands while using define in sqlplus . The Host OS is Linux
define report_name=PROD_${host date "+%b"}.html
The above is not working.
The output should be
define report_name=PROD_JAN.html
Regards,
DBof course I was talking nonsense: the problem here is the mixing of bind variables and DEFINE variables.
With the following changes the script should work (the conditions for begin_interval_time are perhaps not what you want):
variable snap1 number
variable snap2 number
variable rptname varchar2(20)
begin
SELECT min(snap_id) into :snap1 FROM dba_hist_snapshot WHERE CAST(begin_interval_time AS DATE) >= SYSDATE-1;
SELECT max(snap_id) into :snap2 FROM dba_hist_snapshot WHERE CAST(begin_interval_time AS DATE) >= SYSDATE-1;
end;
col file_name_value new_value report_name noprint
select 'PROD_'|| to_char(sysdate,'MON') || '_' || to_char(sysdate,'DD') file_name_value from dual;
define report_type = 'html'
define num_days=2
define begin_snap=:snap1
define end_snap=:snap2
@@?/rdbms/admin/awrrpt.sql -
<p>Also what are the limitations in terms of data size or performance related issues while using csv or text file?</p><p>Is it the best practice to use csv , text file to use as a datasource to improve performance?</p><p>Please Advice.... </p><p> </p>
<p>Hi,</p><p>Create Same Data Input for CSV and Text File ,Create 2 different reports one for CSV and One for Text ,run them one you have done that.</p><p>Go to Report Menu and Select Performance Information .Use the Data in that to check which one is good datasource to improve performance</p><p>Cheers</p><p>Rahul</p>
-
System Stop while using Google Earth
Hi,
Today I downloaded google earth and installed it on my system, while using the program my system stopped for the first time.
As suggeted in the message I shut down the notebook and restarted after sometime, once again it shut down while google earth was running. The message displayed was;
system stopped: 0x0000008E (0x80000004, 0x80709AD1, 0xA8B9454C, 0x00000000)
Whats the problem.
Solved!
Go to Solution.i see you have not mentioned your system specs?if your's is a new system or has direct x support or even(opengl) you may not have to these kinds of issues kindly post your system configuration to have further assesement regarding this matter
ps:google earth works flawlessly on my system
Cheers and regards,
• » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo -
How can i improve my system performance
hello Experts,
today i faced one problem
i,e i got mails from users that my server is very slow
i checked
responce time--985ms
and no long running jobs and also buffers also fine
in my system all things are fine
now want to know to check how much network utilization required to my sap server?
i have doubt in network utilization ....i need help in tis way only
RegardsIs the DB on a separate server? I ask because even a fairly slow public network (i.e. for SAPGUI) is unlikely to be a cause of major performance problems. Note 'unlikely', not 'impossible'. If the DB is separated from CI and/or DI and that link is 100Mb/s, things can get nasty.
Slow performance is real tricky to solve blind. You say your system is fine and you mention SAP-level metrics. How about other stuff?
Paging rate
CPU load averages
Runaway processes at O/S level
If Windows server, check for an antivirus program monitoring \usr\sap\.....
Filesystem/volume access speeds
System log messages (OS not SAP)
Regards,
Alan. -
BEx System errors while using RSTT trace
Hello,
We are having several problems while using BEx SapGui NW 2004s SR1 Presentation - 6.40 Compilation 5 and SAP Netweaver 2004s BI AddOn Patch Level 801 (Bw700SP08P_801-10001615.exe). The system is and ABAP+Java implementation in Stack 7.
For been able to trace problems in BI Planning we activate the RSTT trace for local BPS1 user (the one used in development). When activated, no BEx query cannot be opened, raising error "Overflow when converting from 389", so we cannot trace any issue.
Any help?
Thank you and regards,
Message was edited by: Ignacio ArroyoHi ,
Do you have any docs how to activate the user ?.It will be great if you send some info on this.
thanks,
reddy -
Strange system pause while using OS X on Mac mini
My Mac mini has always had a funny little problem. As you are working along, choosing menu commands and pressing buttons, the mini will make a sound like a sigh and stop responding for maybe a second or two. Then all is well and you're back to normal. This seems to happen randomly but regularly (fairly frequently). Any ideas or suggestions you might have would be appreciated. I'm not even quite sure how to phrase the question to search the support files.
Thanks - that information helps, even if only to eliminate a couple of possible causes!
It seems to me to be likely that the noise and pause are related to system activity, thus your observation that it may seem to happen when you 'do something' is likely right. As such it will be interesting to know if MenuMeters shows an unusual rise in paging or CPU load when it occurs, or even if it seems related to network traffic.
There is also a possibility that the symptoms are related to an underlying issue with MacOS on your system, so after following Daddy Paycheck's suggestion regarding checking your hard drive and then checking MenuMeters, I'd suggest a download of YASU (http://jimmitchell.org/projects/yasu/) and after quitting all other applications, setting to run all tasks. YASU is a basic set of utilities for doing routine maintenance on the system, notably repairing permissions (you'll likely have noticed that in Disk Utility as well) and updating Prebinding. Along with this it clears and trims log files and caches. All these are capable of causing symptoms of the sort you describe.
As a precaution, you should backup all your data if you don't already routinely do so. Aside from the possibility that data could be disturbed by running such utilities (rare, but it happens) the symptoms you describe can also reflect the early onset of hard drive failure! -
Backing Up Your System & Setting Configurations Using External Hard Drive.
We just purchase A external hard drive to back up our system. I believe the product name Is "Lacie" Anyway, the question is what is the best way to set up to an external hard drive so that my computer runs @ it's best speed. Recently I found out that I had about 5GB of hard drive space on my computer and this is why we made the purchase. Now is it wise to install logic on the new external or keep it on my internal drive. Basically for the best possible performance how should I set up everything and transfer data where I can keep a great work flow.
What's your goal? Do you want to back up your data or make a clone of your HD? These take two different approaches.
A clone of your HD is an exact copy which can be used to restore your main HD in case of drive failure/data corruption/severe data loss. Do a search for "Carbon Copy Cloner" to do this.
If you want to back up your data (Logic songs, etc.), use the HD just for this purpose and no other. And NEVER work on those backup copies. They're "safety" copies, not to be altered ever. If you need to work on a backup copy of a song, make a copy of the copy and work on that.
To make backup of Logic songs easier, always save your songs as projects and simply backup the project folders. Makes life easy. -
System crash while using Callable objects for SAP transaction !!
Hi all,
i have created a CO to use SAP transaction, i have created a system, its connection test is successfull.when i create the CO and specify the system and Tcode, and Test it, its giving a Short dump saying its crashed, do anyone knows the rerason??please guide me
Thanx in advanceHi Audrey
The Help for SAP Transactional iView can be found here - but although I have followed these steps and an associated blog it still does not work for me. Perhaps you will have more luck. See below for my particular error (if your able to help me ;-).)
SAP Help for SAP Transactional iView
http://help.sap.com/saphelp_nw04/helpdata/en/02/f9e1ac7da0ee4587d79e8de7584966/frameset.htm
SAP Blog for the same
Create SAP Transaction iView using SAPGUI for Windows
NOTE : Sadly I cannot get mine to work !! ****
I'm also trying to create a SAP Transaction iView. Following these steps.
I can preview the iView OK. So it seems that System and Alias are OK.
BUT when I logon as a user on the Portal with that iVew it fails with the same type of error you had.
"Unable to lookup System 'SAPDBEAlias'. Please check the system object and the alias.." -
Cannot create class in system package while Using Sprite class
Hi i developed a game using Sprite class & imported
javax.microedition.lcdui.game.*; package. But when i tried to build this project it gave me "Cannot create class in system package" error. Worst thing is that now again if i build, then it displays error "package javax.microedition.lcdui.game.*; does not exist" . Pls help meFirst exception means that you tried to create a class with the package name equaling one from the predefined libraries in midp/cldc.
For your second error, add all the jars you are using into the project's classpath.
Mihai -
Increase the Insert performance while using th e DBlink
Dear Friends ,
I am trying to insert 4 lacs records into a table by using the DB-Link.It is taking very long time ( 1hour) to insert the records,is there any other way where to increase the performance.
This is my insert statement.
insert /*+ APPEND PARALLEL NOLOGGING */ into target_table
select * from source_table@dblink_nameThere is little chance alter table your_table noparallel would help (if parallel keyword was specified at table creation)
It seems you'll have to be more specific (I consider using parallelism as the last resort so consequently I don't have much experience)
- is this a one time job ?
there are several other methods (export/import, datapump, external tables ...) to get the job done
- is this a regular procedure ?
is it feasible to use methods mentioned above
- how frequently has to be performed ?
is it still feasible to use methods mentioned above (taking dblink performance as not acceptable)
- is it mandatory to transfer 400 000 rows from the other database ?
wouldn't be better to pull from the other database just the rows you need ?
wouldn't be better to make the other database the driving site ?
Regards
Etbin
Edited by: Etbin on 25.12.2011 13:30
Try to remove (not sure if it can be done) the status answered as others would think no other contributions are needed
you are supposed to mark the thread answered when you think a satisfactory solution from your point of view has been provided. Take a look at FAQ link (on upper right) -
Degraded Performance while using NavRollUpKey
Hi,
I am trying to get products information from Endeca seach. I am using .Net API provided by Endeca. I need to display aggregated records on site landing page. While calling API, I get results in 1.5 sec. But when I apply NavRollUpKey, Same query takes around 5 sec to retrieve data.
Is there anyone could point out what is wrong. OR is there any one can poit out best practices to get aggregated records.Hi,
When returning regular (non-aggregated) record results, the MDEX Engine calculates refinement counts per refinement. (You enable refinement counts in Developer Studio.)
The refinement counts for regular records are returned by the MDEX Engine as the Dgraph.Bins property.
When returning aggregated record results, the --stat-abins flag lets the MDEX Engine return the refinement counts for aggregated records.
These counts accurately reflect the number of aggregated records per refinement. (You enable refinement counts for aggregated records by using this flag.)
The refinement counts for aggregated records are returned by the MDEX Engine as the Dgraph.AggrBins property.
Note that dynamic statistics on aggregated records is an expensive computation for the MDEX Engine.
Use *"--stat-abins"* flag only if you intend to display the refinement counts for aggregated records in your front-end application
Maybe you are looking for
-
How do I sync iPhone contacts into Outlook 2011 for Mac
Here is the quick situation. I have an iPhone 5s and all of my contacts from my previous company (personal and professional) are on there. My old exchange profile is also there and I am afraid if I delete the profile, I will lose all my contacts. My
-
VM crash when calling crystal report in java
======= REPOST ======= We experience a serious problem when try to develop a crystal report application that run at Sun Solaris 10. Our program is to export pdf from crystal report. The program will always got VM crash when open the crystal report or
-
Labview vs Xilinx controller on FPGA
Hi, I have a FPGA : Processor Xilinx XC2S30 and platform : Digilent, Digilab 2XL Is labview compatible in some ways ? If yes how ? and, What Labview can do better than Xilinx (simulink, Matlab)? If no, what Platform I can use ? CompactRio seems to b
-
Since installing OS 10.5 and subsequently updating to 10.5.1 I have experienced choppy sound in all applications. VLC, DVD Player, Windows Media Player, iTunes, everything. And those apps that use sound skip because of the sound loading problem as we
-
Hi! I have just started using DW. and i am finding myself facing a wall. I have downloaded a OsCommerce site to my computer, complete with an SQL dump. For those of you out there who doesnt know OsC, it is a open source php Webshop. Now!. what i want