Improvement need to be done bios 1.55

moving from bios 1.4 to 1.55 beta is good, but I found one thing that this bios is need to be work at and that is the stability on 1T. My kingston hyperX 4000 is design at 3-4-4-8-1T @ ddr 500 to take full advantage of the memory but the system wont post at very slight HTT adjustment other than 2T. 1T is much more responsive and gives you better score on Sandra. If MSI fix this stability issue this board will come close to DFI board known for best stability and overclocking at high rate.

Quote
Originally posted by cool'n'quiet
Wannafly overclocks with just 1 stock of RAM. For the majority of us who overclock with 1GB, it will be even harder to achieve high rates without resorting to 2T. But that's mostly an issue for socket 939 people. Socket 754 seems to have a limit of DDR500 (appx) when using 2 double sided dimms, due to drive strength. So you might run up against that limit (at 1T) before 2T even becomes a consideration.
I'd be very happy to be proven wrong: are there any 754 users out there with 2x double-sided dimms getting significantly more than DDR500?
yes, 1 stick can go high than 2.
If you want to see some oc about how high 2 sticks of 512mb rams go,you can visit this site:
forum.coolaler.com
Just because many of them can go above DDR500 with 2 sticks of 512MB rams when 1 T enabled.
Why?
TCC5 and TCCD based rams are so NICE.

Similar Messages

In need of an updated BIOS

I have a modded BIOS from here and it came with OROM 12.6.0.1867. I am need for the same BIOS, but with Intel OROM 12.7.0.1936, can someone help me out? Current BIOS is E1762SZ2.30U, laptop is a MSI GT70-OND, running Windows 7 Pro 64-bit. Thanks

is the comms io relative to jsp, or j2me?STFW. I gave you the link. Go research it.
Before asking a technical question by email, or in a newsgroup, or on a website chat board, do the following:
* Try to find an answer by searching the Web.
* Try to find an answer by reading the manual.
* Try to find an answer by reading a FAQ.
* Try to find an answer by inspection or experimentation.
* Try to find an answer by asking a skilled friend.
* If you are a programmer, try to find an answer by reading the source code.
When you ask your question, display the fact that you have done these things first; this will help establish that you're not being a lazy sponge and wasting people's time. Better yet, display what you have learned from doing these things. We like answering questions for people who have demonstrated that they can learn from the answers.
--- From How To Ask Questions The Smart Way by Eric Steven Raymond

The F5 Networks Host Plugin no longer works since I upgraded to Firefox 4.0.1 and this is a major problem. what needs to be done to correct this?

When attempting to login to a GlasPac (auto glass) website, it requires an F5 Plugin to be installed. This has been working in the past using Firefox 3.x.x and now since I upgraded to Firefox 4.0.1 it says the plugin in not compatibable with Firefox 4 and will not load it so I am dead in the water !!!!!!! The FF 4.0 upgrade has caused this serious situation ... what needs to be done to rectify it ???
Thanx in advance ... Denny

Do these hotfixes help you? http://support.f5.com/kb/en-us/solutions/public/12000/700/sol12757.html

Hi, We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1. When we try to download a file(.pvw file) in that application safari throws "Download failed" error. Please suggest what needs to be done.

Hi,
We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1.
When a file url is clicked instead of asking for Save or Open or Cancel options, the file gets opened on IPad by default.
Is this default behaviour which cannot be changed or can it be configured to ask user preference?
When we try to download a file(.pvw file -> a model file) in the above application, safari throws "Download failed" error.
Please suggest what needs to be done.
Regards,
Pramod

Safari on an iPad in general does not allow downloading of files. That's a safety precaution in the iOS SDK to keep unauthorized content off of iOS devices. Safari will open from the web site file types that it can handle, but direct downloading isn't normal behavior, and I don't believe the behavior can be changed, though you can try asking in the developer forum, either here or the one to which you have access as a member of Apple's iOS developer program.
Regards.

My iPod touch 4 generation 32gb sometimes is really slow and when ever I get on a app it will shut it down. My lock botton is broken and I use the accesery botton to lock it. That being said I can't power down my iPod. I need help, I don't know what to do

My iPod touch 4 generation 32gb sometimes is really slow.When ever my iPod is being slow and I get on an app the app will shut down. My lock botton is broken and I use the accesery botton to lock it. That being said I can't power down my iPod. I need help, I don't know what to do! Could you tell me how I can power down my iPod or how I can fix the slowness and the shutting down of the apps.

- Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
- Next, reset the iPod
To reset the iPod without the hardware buttons,
Reset network settings: Settings>General>Reset>Reset Network Settings. All your wifi and bluetooth preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected. You will have to rejoin wifi networks and repair BT devices
Then you can try:
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

IDOC to File Scenario - Configuration steps need to be done in R3 and XI

Hi Experts,
I am working with IDoc to File scenario. Can someone please explain, what are the steps or configuration things need to be done in R3 and as well as in XI too.
Thanks in advance.
Regards,
Sree

Hi Sree,
I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Also have a look at these forum threads...
IDOC TO FILE SCENARIO
idoc to file scenario
I hope this answers your query.
Regards,
Abhy Thomas

IOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done?

iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done? The only solution we have found is to reboot the iPad. We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes.

iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done? The only solution we have found is to reboot the iPad. We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes.

So I got this email this morning about my apple ID and that I have to review my apple ID information. Failure to do this will result in the deletion of my apple ID and iCloud. Says it needs to be done within 48 hours. Is this legit?

So I got this email this morning about my apple ID and that I have to review my apple ID information. Failure to do this will result in the deletion of my apple ID and iCloud. Says it needs to be done within 48 hours. Is this legit? It gives me a link to go to but I am not sure if this is a scam. Also it's signed Yours faithfully "apple iguru"

read this for a comprehensive guidance for future
https://www.apple.com/legal/more-resources/phishing/

Itunes stops working when accessing the store what needs to be done to get it working again?

itune stops working when accessing the store. What needs to be done to get it working again?

Hey Baitmaster61!
Here is an article that will help you troubleshoot this issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
If you are still experiencing issues with reaching the iTunes Store, you may also need to reference this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Have a number badge in settings that won't go away and there are no updates that need to be done. Help!!!

On my settings, there is a number one (red) that won't go away. There are no updates that need to be done.

Maybe you should try updating 5.1.1 from iTunes? Because I had the same thing and it was 5.0.1.

Created a PDF and added sticky notes, saved and emailed for review, recipient could not see or read the sticky notes. What needs to be done for my sticky notes to be seen and read when emailed. Thanks

I scanned a map and printed to create a PDF document, at that point I added sticky notes of different locations with notes of descriptions, saved and email to client for review.
Client received email but when he opened the attachment, all he could see was the map and none of my sticky notes.
What needs to be done so the recipient can see my sticky notes and read the descriptions for each sticky note?

Hey roy,
Could you please tell me what is your Acrobat version?
Please ensure that recipient downloads the PDF and uses either Adobe Acrobat or Reader to open the sticky notes.
Regards,
Anubha

Is there something that needs to be done in response to deadlock victims?

So, Friday I got a report by one user about an unusual error seen. It appeared to be a one time error that went away when the page refreshed.
I went to the logs, tried to find an associated message to see if there were actions to take.
(Boy, I wish there were a series of books for SP admins that covered all the event and ULS log entries and what action to take to resolve them)
When I got onto one of the farm servers to look at logs, the event log had a number of unusual warnings and errors.
I am taking a look at some of these to see if there is something that needs to be done.
One of the errors - which has occurred 3 times in December - is related to the search software. One says "Foundation Search" and the other two say "Server Search".
So, are these the kinds of things that an admin should just ignore at this noise level (3 in 2 weeks) or is there something that should be done?
The warning is 57 and says that a database error occurred - a transaction was deadlocked on lock resources with another process and was chosen as the deadlock victim.
The first 2 times the application was Search_Service_Application, while the most recent occurrence was
'Search_index_file_on_the_search_server'.

Hi Iwvirden,
Deadlocks on SharePoint databases may cause performance issues in SharePoint.
So if the error occurs on SharePoint content databases and occurs many times, then you need to troubleshoot this issue in SQL:
http://blogs.msdn.com/b/grahamk/archive/2009/06/15/troubleshooting-sql-server-deadlocks-and-performance-when-running-sharepoint.aspx
http://blogs.technet.com/b/christwe/archive/2014/02/06/what-can-i-do-about-the-deadlocks.aspx
If the deadlocks occur on Search databases, then you can ignore them if there are not too many errors.
http://blogs.msdn.com/b/sharepoint_strategery/archive/2014/02/10/sharepoint-search-and-deadlocks-in-sql-server.aspx
By the way, the errors about search displayed in the ULS log should be checked as these errors may influence your search function.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Photoshop Camera Raw 7.4 Update is not installing because of Error Code U43M1D207. What needs to be done to resolve this error code issue?

Photoshop Camera Raw 7.4 update is not installing because of error code U43M1D207. What needs to be done to resolve this issue?

If you need to post again, please keept the following in mind:
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

What needs to be done to include the leave request type in the work flow

what needs to be done to include the leave request type in the work flow?
the present request for work flow includes the notificationto be sent to the approver
which doesnt include leave request type inthe description
to include this we need to maintain a container variable but what should be the method or abap dic object which has to be used for maintaining this leave request type container

Hi,
You can create and take where you pass leave type and get description of it and create an field in WF containr and fill it than you can use add that field when you are sending notification,.
Atul

What needs to be done to avoid the vulnerability discovered according to hacking story yesterday?

what needs to be done to avoid the vulnerability discovered according to hacking story yesterday?

abombaci wrote:
This software update is only available for people that have Java installed on their Macs. For someone like me since I don't, I don't get the update because I don't need it.
Then you don't need to worry about the Java vulnerability being exploited on your Mac.

Improvement need to be done bios 1.55

Similar Messages

Maybe you are looking for