Improvements for Client Remediation in SCCM 2012 R2

Hello,
Is there any information available about Client Remediation improvements in SCCM 2012 R2 over previous versions?

If by previous version you mean ConfigMgr 2007, then yes, they added a health feature that runs as a scheduled task.
Remember though that nearly all agent health issues in ConfigMgr are not ConfigMgr's doing, they are the result of WMI. So really, it's about the OS you are using. If you are on XP (God help you) you are pretty much always going to have WMI issues for a
variety of reasons (including stupid user tricks). If you are on Win 7, then you're better off but you should also deploy KB2775511. Win 8, to my knowledge, is pretty solid as far as WMI goes.
Jason | http://blog.configmgrftw.com

Similar Messages

  • Is MDT must have for OS deployment in SCCM 2012

    I know that existing MDT could be integrated to a new SCCM.
    Is MDT must have for OS deployment in SCCM 2012 or SCCM has its own engine for OS deployment?
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

    Thanks for the answers.
    one more question...
    I am going to start SCCM deployment in test environment.
    For OS deployment part:
    if MDT is planned for integration with SCCM should I configure OS deployment in SCCM before adding MDT.
    Or in this scenario OS deployment in SCCM could not be touched.
    After all previous answers I understand that OS deployment module is part of SCCM installation and is independent from MDT.
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

  • Client Install Issue - SCCM 2012 R2 - Manual Deploy Installed ok

    Hello, I have sccm 2012 configured with 2,000 machine approx. It is been used mainly as a Software Deployment tool for now. On checking a recent IE10 upgrade, I noticed that there is a number of machines that do not have the client installed (and thus did
    not upgrade IE). I picked 1 machine, searched in SCCM - had no client. I checked all relevant settings:
    Boundary for Client in question - ok
    Local Client Settings (ip,dns,no firewall, ping sccm ok and vice versa etc).
    Once i right clicked to deploy the client, it installed no problem. I checked the ccmsetup log file and the only info it had was from the time that the client was manually deployed (I will attach the log below anyway). I am really puzzled as to why the client
    did not install and if this is the issue why IE is not upgrading (it is hard to pinpoint as there are 250 sites approx). The automatic install task works no problem on other machines once the machine goes online.
    Any help, would be great. Here is the log (I am fairly new to SCCM btw):
    SCCM 2012 R2 - Windows 7 SP1 32 Bit
    ==========[ ccmsetup started in process 7196 ]==========    ccmsetup    05/02/2015 16:28:39    4100 (0x1004)
    Running on platform X86    ccmsetup    05/02/2015 16:28:39    4100 (0x1004)
    Launch from folder C:\Windows\ccmsetup\    ccmsetup    05/02/2015 16:28:39    4100 (0x1004)
    CcmSetup version: 5.0.7958.1401    ccmsetup    05/02/2015 16:28:39    4100 (0x1004)
    In ServiceMain    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Running on 'Microsoft Windows 7 Enterprise ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /ForceInstall /config:MobileClient.tcf    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Command line parameters for ccmsetup have been specified.  No registry lookup for command line parameters is required.    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /ForceInstall /config:MobileClient.tcf    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    SslState value: 224    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    CCMHTTPPORT:    80    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    CCMHTTPSPORT:    443    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    CCMHTTPSSTATE:    224    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    CCMHTTPSCERTNAME:        ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    FSP:    COLSCCM01.LC-UK.ORG    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    CCMFIRSTCERT:    1    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Config file:      C:\Windows\ccmsetup\MobileClientUnicode.tcf    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Retry time:       10 minute(s)    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    MSI log file:     C:\Windows\ccmsetup\Logs\client.msi.log    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    MSI properties:    INSTALL="ALL" SMSSITECODE="COL" FSP="COLSCCM01.LC-UK.ORG" SMSCACHESIZE="10240" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"  
     ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Source List:    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
                      \\COLSCCM01.lc-uk.org\SMSClient    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
                      \\COLSCCM01.LC-UK.ORG\SMSClient    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    MPs:    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
                      COLSCCM01.lc-uk.org    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    No version of the client is currently detected.    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Folder 'Microsoft\Configuration Manager' not found. Task does not exist.    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Updated security on object C:\Windows\ccmsetup\.    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Sending Fallback Status Point message to 'COLSCCM01.LC-UK.ORG', STATEID='100'.    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Failed to get client version for sending messages to FSP. Error 0x8004100e    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Params to send FSP message '5.0.7958.1401 Deployment '    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    State message with TopicType 800 and TopicId {19607F6A-0C46-488C-B28D-36640FB0DF94} has been sent to the FSP    FSPStateMessage    05/02/2015 16:28:40    500 (0x01F4)
    Running as user "SYSTEM"    ccmsetup    05/02/2015 16:28:40    500 (0x01F4)
    Detected 434753 MB free disk space on system drive.    ccmsetup    05/02/2015 16:28:40    500 (0x01F4)
    Checking Write Filter Status.    ccmsetup    05/02/2015 16:28:40    500 (0x01F4)
    This is not a supported write filter device. We are not in a write filter maintenance mode.    ccmsetup    05/02/2015 16:28:40    500 (0x01F4)
    Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=COL))'    ccmsetup    05/02/2015 16:28:40    500 (0x01F4)
    OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert>308202F0308201D8A00302010202104A263F5C34E3AAAA4C178EF33CA94377300D06092A864886F70D01010B05003016311430120603550403130B53697465205365727665723020170D3134303630383134343831315A180F32313134303531363134343831315A3016311430120603550403130B536974652053657276657230820122300D06092A864886F70D01010105000382010F003082010A0282010100A4FF6866BC9622545F811F8008ABDC534E96C9699A3354E990CADB04B1399B29EB80FB844425DEEDD9FE680C57AA0FE05D42CF1D431BB69080D4E7ED91A8255739089A83E4836F28B09331C100B0BAD81AD795EFD01C9ECF8DCE2BE03B52EE3AC35E7003B728E0FA56F145279301189388F3FC90A6C3DA5342C61230550C2B79DECB64AC0958C6DE2D5BF83C3EA29126E231FBEAADBD632F65AF41AC3267DB3986929C46A08AF0BF925A40E15A346B38219CC62C6C0BAC8990C05EA04037458F1853E251D8C16946F845D46CB47884D9EB00543AC8B02A7C099B53F7DE1EBD11AA1272476E5AAF55B2CC38122B62C751D988C81A07D06F87A9F7980D2B3560A90203010001A3383036301E0603551D11041730158213434F4C5343434D30312E6C632D756B2E6F726730140603551D25040D300B06092B060104018237650B300D06092A864886F70D01010B05000382010100A0DE29D627EB45EF2D0074AD578B62CE9007918B4316351DB2DBEFF2D0DF52C0FF58B6DE3405C88572ECCFAF2A7B335B234FE7D1E5B0FDA20548FEFE4B9E6AFB45E77627EDB70E2378A3135FB1FC34C2308F0FBD1ADD890DD08D8D6081B73FFF86DE87DBF678A7CAD73AE32BF6EB3B9D1E4E0380D7FBE3E9F9EF49339031636F2B3CC60989B8443B91F9F69F5837025B6CAE64E2D1837FAF712186A02567EA87F9E82FD170C4DEA61DC61C16226450FCBE062948F2219FB5801DF3AF73443349421A7228F5E1372B5CA165D8ABAB9D1B3FEAF22705A473AAAB034C2A289AA7A507550050D6516C2D7BECDE5686F17CC66FBB7D2C439F15644EBF9EF7E8402109</SiteSigningCert></SecurityConfiguration><RootSiteCode>COL</RootSiteCode><CCM>
    <CommandLine>SMSSITECODE=COL FSP=colsccm01.lc-uk.org SMSCACHESIZE=10240</CommandLine> </CCM><FSP> <FSPServer>COLSCCM01.lc-uk.org</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState"
    Value="0" /></Capabilities><Domain Value="lc-uk.org" /><Forest Value="lc-uk.org" /></ClientOperationalSettings>'    ccmsetup    05/02/2015 16:28:41    500
    (0x01F4)
    Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    The MP name retrieved is 'COLSCCM01.lc-uk.org' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>'    ccmsetup  
     05/02/2015 16:28:41    500 (0x01F4)
    MP 'COLSCCM01.lc-uk.org' is compatible    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Retrieved 1 MP records from AD for site 'COL'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Retrived site version '5.00.7958.1000' from AD for site 'COL'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    SiteCode:         COL    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    SiteVersion:      5.00.7958.1000    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Only one MP COLSCCM01.lc-uk.org is specified. Use it.    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Searching for DP locations from MP(s)...    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Current AD site of machine is Millbank    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Local Machine is joined to an AD domain    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Current AD forest name is lc-uk.org, domain name is lc-uk.org    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    DhcpGetOriginalSubnetMask entry point is supported.    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Begin checking Alternate Network Configuration    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Finished checking Alternate Network Configuration    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Adapter {743579BD-D66A-4BF9-B487-2AAC075B9473} is DHCP enabled. Checking quarantine status.    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Adapter {8F25ACE0-AE8A-45DD-BF3D-F1315E2B9974} is DHCP enabled. Checking quarantine status.    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Adapter {8AE4D673-90E8-4FCF-AE50-79474ADC6190} is DHCP enabled. Checking quarantine status.    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Adapter {9AA2CA9C-0C0A-48E3-B67E-F9E574AE9DB2} is DHCP enabled. Checking quarantine status.    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="COL"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Millbank"/>
        <Forest Name="lc-uk.org"/>
        <Domain Name="lc-uk.org"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.103.38.0" Address="10.103.38.10"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    '    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{57972056-54D4-461F-B818-D3420A0B5C51}</ID><SourceHost>LCD14572</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:LCD14572:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>COLSCCM01.lc-uk.org</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-02-05T16:28:41Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1084"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>'    ccmsetup    05/02/2015
    16:28:41    500 (0x01F4)
    CCM_POST 'HTTP://COLSCCM01.lc-uk.org/ccm_system/request'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Received header '<Msg SchemaVersion="1.1">
        <ID>{48D22538-0FEA-44E6-AAD2-1829DDED2223}</ID>
        <SourceID>GUID:A5143C3E-EA22-4B93-BFF5-B8B859F869F5</SourceID>
        <SourceHost>COLSCCM01</SourceHost>
        <TargetAddress>direct:LCD14572:LS_ReplyLocations</TargetAddress>
        <ReplyTo>MP_LocationManager</ReplyTo>
        <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
        <Priority>3</Priority>
        <Timeout>600</Timeout>
        <TargetHost>LCD14572</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-02-05T16:28:39Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="2378"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
    Name="AuthSenderMachine">COLSCCM01;COLSCCM01.lc-uk.org;</Property><Property Name="MPSiteCode">COL</Property></Hook></Hooks><Payload Type="inline"/></Msg>'    ccmsetup  
     05/02/2015 16:28:41    500 (0x01F4)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="COL" MasterSiteCode="COL"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002" Signature="http://COLSCCM01.lc-uk.org/SMS_DP_SMSSIG$/COL00002"/><ADSite
    Name="Millbank"/><IPSubnets><IPSubnet Address="10.20.0.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property
    Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>COLSCCM01.lc-uk.org</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage
    FullPackageID="COL00002" FullPackageVersion="2" FullPackageHash="DB3D5D115FC93F6275817FB9791864D98D4AF6897339B9D4AB1C0DE456C240A8" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false"
    LastModifiedTime="30376953;932870912" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'    ccmsetup    05/02/2015
    16:28:41    500 (0x01F4)
    Found local location 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Discovered 1 local DP locations.    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    PROPFIND 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Got 401 challenge Retrying with Windows Auth...    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    PROPFIND 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Using DP location http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    GET 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002/ccmsetup.cab'    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Got 401 challenge Retrying with Windows Auth...    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    GET 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002/ccmsetup.cab'    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from manifest    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000'    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Site version '5.00.7958.1000' is compatible. Client deployment will continue.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Location 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002' passed site version check.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Successfully loaded ccmsetup manifest file.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1401'    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Running from temp downloaded folder or manifest is not newer than ccmsetup.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/vcredist_x86.exe' is applicable. Add to the list.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'x64/vcredist_x64.exe' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/vc50727_x86.exe' is applicable. Add to the list.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'x64/vc50727_x64.exe' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/WindowsUpdateAgent30-x86.exe' is applicable. Add to the list.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'x64/WindowsUpdateAgent30-x64.exe' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/msxml6.msi' is applicable. Add to the list.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'x64/msxml6_x64.msi' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/msrdcoob_x86.exe' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'x64/msrdcoob_amd64.exe' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'pkgmgr.exe' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'dism.exe' is applicable. Add to the list.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'wimgapi.msi' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/MicrosoftPolicyPlatformSetup.msi' is applicable. Add to the list.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'x64/MicrosoftPolicyPlatformSetup.msi' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/WindowsFirewallConfigurationProvider.msi' is applicable. Add to the list.    ccmsetup    05/02/2015 1

    Hi, Yes i had a look at the log yesterday. there are errors initially, but then the install completes. I can copy the whole log here, the machine in question is LCD14572. If you could take a look would be great. Still doesnt explain why i had to manually
    push the client though:
    Execute query exec [sp_CP_GetPushRequestMachineResource] 2097154539    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:05:58    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushMachineName] 2097154539    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:05:58    3648 (0x0E40)
    Received request: "2097154539" for machine name: "LCD15000" on queue: "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:05:58    3648 (0x0E40)
    Stored request "2097154539", machine name "LCD15000", in queue "Processing".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:05:58    3648 (0x0E40)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154539, 1    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:05:58    3648 (0x0E40)
    ----- Started a new CCR processing thread. Thread ID is 0x12d8. There are now 1 processing threads    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Submitted request successfully    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Getting a new request from queue "Retry" after 100 millisecond delay.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Found CCR "2097154540.ccr" in queue "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    ======>Begin Processing request: "2097154539", machine name: "LCD15000"    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    4824 (0x12D8)
    Execute query exec [sp_IsMPAvailable] N'COL'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    4824 (0x12D8)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    4824 (0x12D8)
    ---> Attempting to connect to administrative share '\\LCD15000\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    4824 (0x12D8)
    Execute query exec [sp_CP_GetPushRequestMachine] 2097154540    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Successfully retrieved information for machine LCD14589 from DB    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushRequestMachineIP] 2097154540    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushRequestMachineResource] 2097154540    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushMachineName] 2097154540    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Received request: "2097154540" for machine name: "LCD14589" on queue: "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Stored request "2097154540", machine name "LCD14589", in queue "Processing".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154540, 1    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    ----- Started a new CCR processing thread. Thread ID is 0x1d10. There are now 2 processing threads    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Submitted request successfully    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Getting a new request from queue "Retry" after 100 millisecond delay.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Found CCR "2097154542.ccr" in queue "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    ======>Begin Processing request: "2097154540", machine name: "LCD14589"    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    7440 (0x1D10)
    Execute query exec [sp_IsMPAvailable] N'COL'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    7440 (0x1D10)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    7440 (0x1D10)
    ---> Attempting to connect to administrative share '\\LCD14589\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    7440 (0x1D10)
    Execute query exec [sp_CP_GetPushRequestMachine] 2097154542    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Successfully retrieved information for machine LCD14571 from DB    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushRequestMachineIP] 2097154542    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushRequestMachineResource] 2097154542    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushMachineName] 2097154542    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Received request: "2097154542" for machine name: "LCD14571" on queue: "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Stored request "2097154542", machine name "LCD14571", in queue "Processing".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154542, 1    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    ----- Started a new CCR processing thread. Thread ID is 0x1768. There are now 3 processing threads    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:04    3648 (0x0E40)
    Submitted request successfully    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:04    3648 (0x0E40)
    Getting a new request from queue "Retry" after 100 millisecond delay.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:04    3648 (0x0E40)
    Sleeping for 60 minutes for queue "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:04    3648 (0x0E40)
    ======>Begin Processing request: "2097154542", machine name: "LCD14571"    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:04    5992 (0x1768)
    Execute query exec [sp_IsMPAvailable] N'COL'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:05    5992 (0x1768)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:05    5992 (0x1768)
    ---> Attempting to connect to administrative share '\\LCD14571\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:05    5992 (0x1768)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:21    4824 (0x12D8)
    ---> The device LCD15000 does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:21    4824 (0x12D8)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:21    4824 (0x12D8)
    ---> Attempting to connect to administrative share '\\LCD15000.lc-uk.org\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:21    4824 (0x12D8)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:23    7440 (0x1D10)
    ---> The device LCD14589 does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:23    7440 (0x1D10)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:23    7440 (0x1D10)
    ---> Attempting to connect to administrative share '\\LCD14589.lc-uk.org\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:23    7440 (0x1D10)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:26    5992 (0x1768)
    ---> The device LCD14571 does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:26    5992 (0x1768)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:26    5992 (0x1768)
    ---> Attempting to connect to administrative share '\\LCD14571.lc-uk.org\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:26    5992 (0x1768)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> The device LCD15000.lc-uk.org does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> Attempting to connect to administrative share '\\LCD15000\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> The device LCD15000 does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> ERROR: Unable to access target machine for request: "2097154539", machine name: "LCD15000",  access denied or invalid network path.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47  
     4824 (0x12D8)
    Execute query exec [sp_CP_SetLastErrorCode] 2097154539, 53    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    Stored request "2097154539", machine name "LCD15000", in queue "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154539, 2    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    Execute query exec [sp_CP_SetLatest] 2097154539, N'02/05/2015 16:06:47', 2    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    <======End request: "2097154539", machine name: "LCD15000".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> The device LCD14589.lc-uk.org does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> Attempting to connect to administrative share '\\LCD14589\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> The device LCD14589 does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> ERROR: Unable to access target machine for request: "2097154540", machine name: "LCD14589",  access denied or invalid network path.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51  
     7440 (0x1D10)
    Execute query exec [sp_CP_SetLastErrorCode] 2097154540, 53    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    Stored request "2097154540", machine name "LCD14589", in queue "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154540, 2    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    Execute query exec [sp_CP_SetLatest] 2097154540, N'02/05/2015 16:06:51', 2    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    <======End request: "2097154540", machine name: "LCD14589".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    ---> The device LCD14571.lc-uk.org does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    ---> Attempting to connect to administrative share '\\LCD14571\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    ---> The device LCD14571 does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    ---> ERROR: Unable to access target machine for request: "2097154542", machine name: "LCD14571",  access denied or invalid network path.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55  
     5992 (0x1768)
    Execute query exec [sp_CP_SetLastErrorCode] 2097154542, 53    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    Stored request "2097154542", machine name "LCD14571", in queue "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154542, 2    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    Execute query exec [sp_CP_SetLatest] 2097154542, N'02/05/2015 16:06:55', 2    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    <======End request: "2097154542", machine name: "LCD14571".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    CCR count in queue "Retry" is 3.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:07:42    6564 (0x19A4)
    Sleeping for 634 seconds...    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:07:43    6564 (0x19A4)
    Thread has been inactive too long. Closing thread    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:47    4824 (0x12D8)
    --- This thread is terminating due to inactivity    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:47    4824 (0x12D8)
    ----- Terminated CCR processing thread. There are now 2 processing threads    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:47    4824 (0x12D8)
    Thread has been inactive too long. Closing thread    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:51    7440 (0x1D10)
    --- This thread is terminating due to inactivity    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:51    7440 (0x1D10)
    ----- Terminated CCR processing thread. There are now 1 processing threads    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:51    7440 (0x1D10)
    Thread has been inactive too long. Closing thread    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:55    5992 (0x1768)
    --- This thread is terminating due to inactivity    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:55    5992 (0x1768)
    ----- Terminated CCR processing thread. There are now 0 processing threads    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:55    5992 (0x1768)
    Sleeping for 1 seconds...    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:16    6564 (0x19A4)
    The Site Control File has not changed since the last parameter update.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:17    6564 (0x19A4)
    Updating Site Parameters    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    MP Ports: 80    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    IISPreferedPort: 80    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    MP SSL Ports: 443    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    IISSSLPreferedPort: 443    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Default MP: COLSCCM01.lc-uk.org    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Default MP Type: 1    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Default MP: [None]    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Certificate Selection Criteria:    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Certificate Store:    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    SSL State: 224    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Select First Certificate: 1    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Certificate Issuers:    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Checking configuration information for server: COLSCCM01.LC-UK.ORG.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Checking configuration information for server: COLSCCM01.LC-UK.ORG.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Fallback Status Point: COLSCCM01.lc-uk.org    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Install on DC: False    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Option for installing using IP address: 0    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Sleeping for 1200 seconds...    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Waiting for change in directory "D:\Program Files\Microsoft Configuration Manager\inboxes\ccr.box" for queue "Incoming", (30 minute backup timeout).    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:23:39  
     2876 (0x0B3C)
    Execute query exec [sp_CP_GetNewPushMachines] N'COL'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:28:09    2876 (0x0B3C)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154468, 1    SMS_CLIENT_CONF

  • What are the Query criterion property attributes to search for KB's in SCCM 2012

    A client is ask what servers might have a particular hotfix(ex: KB2798040) installed. The Hotifx is not in our WSUS catalog because it is not a critical security patch so it is not downloaded. What is the SCCM 2012 R2 Query criterion property attributes
    to find a particular KB?

    Depending on the OS of the client, that information may not be collected by default.
    Rather than collecting all of the HotfixID class, instead, consider using DCM for this single HotfixID.
    Sherry has previously posted about ways to do this,
    http://myitforum.com/cs2/blogs/skissinger/archive/2011/08/17/non-security-hotfix-detection-for-windows-7-2008.aspx
    and here's a post by Nick which seems to be based on the very same approach:
    http://t3chn1ck.wordpress.com/2010/10/20/sccm-dcm-inventory-for-installed-windows-hotfixes/
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Lync 2013 x64 silent client deployment via SCCM 2012 SP1

    Greetings everyone!
    I ran into a problem with Lync 2013 x64 silent deployment.
    I need to provide every workstation with Lync 2013 client, so i decided to use deployment via SCCM 2012 sp1.
    I created 2 msp files with OCT, one based on x86 Office 2013 Proplus, and other based on x64 Office 2013 Proplus.
    Added them as applications to sccm software library.
    Deployment of Lync 2013 x86 application was a success with over than 80% compliance. 
    But all Lync 2013 x64 automatic installations finish with different errors.
    I created special device collection for workstations with office 2010 x64 and 2013 x64, because i can't install other architecture products once it has x64 product installed.
    My membership query-rules for this collection:
    Office 2013 x64
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
    = SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90150000-0011-0000-1000-0000000FF1CE}"
    Office 2010 x64
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
    = SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90140000-0011-0000-1000-0000000FF1CE}"
    My application deployment type points to setup.exe in office 2013 x64 installation folder, where i created msp file in updates folder via OCT and edited config.xml file in proplus.ww folder.
    So my installation program looks like this setup.exe /adminfile updates\1lync.msp /config proplus.ww\config.xml
    The same configuration works with Lync 2013 x86 deployment, except other setup folders.
    When i try running installation program setup.exe with /adminfile and /config parameters locally, it installs successfully without errors or warnings.
    I'm trying to find out problem source, does anyone have ideas what I am doing wrong?
    Also i'm trying to reduce office 2013 installation folder size, what subfolders are necessary for Office 2013 proplus installation (still installing only lync with common files and tools)? Because now 3.5 GB package is quite hard to distribute to sccm secondary
    sites with deployment point.
    Thanks in advance.

    Hi,
    Here are some tips and tricks for your reference.
    Tips and Tricks: Deploying Lync 2013 client using SCCM 2012 | Lync 2013 Client Customization for SCCM 2012 Deployment Package
    http://zahirshahblog.com/2014/01/08/tips-and-tricks-deploying-lync-2013-client-using-sccm-2012-lync-2013-client-customization-for-sccm-2012-deployment-package/
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Monitor model (Desktop Monitor) was not loaded in the client resource explorer | SCCM 2012

    Hi Everyone,
    We have SCCM 2012 installed and configured. More than 2000+ computers have been installed SCCM client and manageable by SCCM server.
    The inventory (Desktop Monitor) was not loaded in the client resource explorer (For some clients it got inventoried). Is there are possibilities that the Max file size might get exceeded the actual limit for the hardware inventory
    which has to be increased in the registry?
    Please provide us a solution.
    Thanks in advance,
    Iniyan G

    See dataldr.log on the site server. It would show .mif files that exceeded the file size. InventoryAgent.logon the client might also help.
    Torsten Meringer | http://www.mssccmfaq.de

  • Client manageability in SCCM 2012

    Hi All
    I am Planning to have test SCCM 2012 environment and for that i need few architecture suggestions. Kindly suggest me on the same so that i can implement an effective infrastructure design.
    Total Number of Clients to Support - 58000
    First Draft version of design consist of 1 Primary Site and 3 Seconadry Sites. Kindly confirm if 1 primary and 3 secondary site will be able to cater 58000 clients. As per my understanding secondary site supports 5000 clients and Primary sites can support
    25000 Clients.
    Also confirm that clients under secondary site will be considered as client of primary site (linit of 25000) or seperately counted (25k +5K).
    Regards
    Regards Suresh

    Kent's book talks about a limitation of 50 000 when using a local SQL server. 
    Kent's book does state this. 
    Note that the Technet article states the following (from the link supplied by John):
    Client group 1 includes Windows Server and client.
    Site type
    Configuration Manager version
    Client group 1
    Client group 2
    Client group 3
    Stand-alone primary site, with a local site database, or a remote site database
    System Center 2012 Configuration Manager with no service pack 1
    100,000
    50,000 4
    25,000
    System Center 2012 Configuration Manager with SP1
    100,000 2
    50,000 4
    25,000
    System Center 2012 R2 Configuration Manager
    100,000 2
    50,000 4
    25,000
    Child primary site with a local site database
    System Center 2012 Configuration Manager with no service pack 1
    50,000
    50,000 4
    25,000
    System Center 2012 Configuration Manager with SP1
    50,000 2
    50,000 4
    25,000
    System Center 2012 R2 Configuration Manager
    50,000 2
    50,000 4
    25,000
    Child primary site with a remote site database
    System Center 2012 Configuration Manager with no service pack 1
    100,000
    50,000 4
    25,000
    System Center 2012 Configuration Manager with SP1
    100,000 2, 3
    50,000 4
    25,000
    System Center 2012 R2 Configuration Manager
    100,000 2, 3
    50,000 4
    25,000
    Secondary site
    Any version 1
    5,000 5
    Cheers
    Paul | sccmentor.wordpress.com

  • Workgroup client cannot discovered SCCM 2012 R2

    Hi,
    I have enabled the Network Discovery in SCCM 2012 R2, and defined the subnet of clients that I want to manage. Then IP subnet boundaries has been created. When I see
    Devices in Assets and Compliance, the workgroup clients cannot discovered.
    Communication between the workgroup clients with SCCM server is no issue in the network, by ping and mapping folder share in both is good. Windows firewall on all workgroup clients has configured to allow port File and Printer Sharing and WMI.
    How I can discovered all Workgroup clients?
    Thanks
    Regards, Bar Waelah

    Hi Bar Waelah,
    I think you need to configure the Maximum hops on the bottom of SNMP Tab.
    For more details, please check the Limiting Network Discovery.
    http://technet.microsoft.com/en-us/library/gg712308.aspx#BKMK_NetworkDisc
    You could also specify the IP Address or NetBIOS name of the device in SNMP Devices.
    Best Regards,
    Joyce 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

    I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012.  Everything installs without error.  I have acquired a certificate for SCUP signing from the internal Enterprise CA.  I have
    verified the signing certificate has a 1024 bit key.  I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer.  When I attempt to publish a Flash update with Full content I receive the following
    error:
    2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
    \\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
    I have redone the certificates three times with no luck.  I can import metadata, but any attempt to download content results in the verification error.
    TIA

    Hi Joyce,
    This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048.  Thank you for being my second set of eyes.
    I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
    and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
    2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
    \\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
    Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect?  In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic." 
    No Flash updates in the ConfigMgr console are marked as downloaded.  I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works. 
    Comments and suggestions welcome.

  • Handling of pending reboot, exclusive updates for patch management with SCCM 2012

    Hello,
    Planning to use SCCM 2012, I would like to understand how smart is SCCM 2012 when dealing with specific patch management situation.
    Assuming I have the following:
    - A given server to be patched is missing a lot of updates, several being mutually exclusive. This typical case will require several reboot / patching to properly obtain a server fully up to date.
    - A given server to be patched is in pending reboot state because the local admin installed new software and has not restarted the server yet as requested
    - Those servers have configured maintenance windows of 2 hours during each night. I scheduled a deployment of missing patches authorizing restart.
    --> when the maintenance window will be reached:
    - will the server first be restarted to clean the pending reboot ?
    - will the the server be patched / restarted several times as required to fully meet the updates to be deployed.
    Another scenario on workstation side:
    - can I enforce deployment of updates at a given time, do not automatically restart the workstation during patch deployment, but after deployment schedule a mandatory restart with a countdown if there is a pending reboot... From end-user perspective, it
    would have the following behavior. For instance:
    - patches are automatically installed on Monday at 10 AM
    - as soon as deployment is done, warning message is displayed to ask users to reboot
    - then user has up to 48h to restart his computer by himself. If he does not do it, it will be automatically done after countdown expires.
    --> Can such a scenario be managed by SCCM 2012 ?
    Regards.

    Hi,
    I have a related question about deploying Microsoft Security Updates to workstations via SCCM 2012.  Is there a way to deploy the MS updates to workstations and only suppress reboots for machines with users logged on or locked?  There seems to
    be only 2 different options for reboots, Suppress them all or don't suppress them at all.  We would like SCCM to reboot the machines that are logged off, but suppress the reboot for those that are logged on, while at the same time, provide the user with
    a notification that their machine needs to be rebooted (at their convenience). 
    We've tried applying the Domain GPO "No auto-restart with logged on users for scheduled automatic updates installations" (Enabled) and "Configure Automatic Updates" (Disabled), but the logged on/locked machines still receive the restart countdown with no
    option to postpone or delay.
    This is a show stopper for us since we have an environment where we are absolutely not allowed to reboot a logged on machine.
    For a little background, we are coming from SMS 2003 and the Distribute Software Updates (ITMU) way of deploying MS Updates, where we could always set the program to run "Only when no user is logged on".
    Please tell me there is a way to achieve our desired result.
    Thanks,
    Dan 

  • Script For Deleting Computers in SCCM 2012

    Dears,
    I need script to remove all the remain computers in SCCM 2012, sometimes we are going to delete some computers in active directory but the computers still remain in SCCM 2012, so I need script or query to find all the computers which removed from active
    directory but still remain in SCCM 2012, because I don't want to go remove them manually one by one.'
    Thanks..

    Thanks for article but below are not clear for me. I know only meaning of site code which I replaced with the script but is not working. My site code is "S01"
    1- why there is two site codes?
    2- Why there is two local domain names?
    3- What dose mean by installdrive and why we have two?
    # $sitecode = "<sitecode>:" 
    # $sitecode = "PS1:"
    # $installdrive = "<ConfigMgr Admin Console installation>"
    # $installdrive = "C:"
    # $loglocation = "<loglocation>"
    # $loglocation = "D:\Logfiles\"
    # $localdomain = "<domainname>"
    # $localdomain = "ConfigMgrLab"
    # $maxdevices = <maximum number of devices in your ConfigMgr environment> 
    # $maxdevices = 2000

  • How to manage Forefront Endpoint Prorection Security Client 2010 with SCCM 2012

    Hi
    I've sucessfully installed System Center Configuration Manager 2012
    and now I 'd like to push/deploy Forefront Endpoint Protection Client 2010 on client machines.I also know that Microsoft embedded Forefront Endpoint Protection in SCCM 2012 so that you can manage FEP from single SCCM 2012 console.Now
    when I try to push FEP client on client machines using Default Client Settings
    then I've found that all Endpoint Protection settings are greyed out !
    Do I need to install Forefront Endpoint Protection 2010 or 2012 Server (which is beta) with SCCM 2012, in order to deploy FEP client or is there a workaround or solution to resolve this ?
    Thanks
    Sohail

    Hi,
    Endpoint Protection 2012 is builtin in SCCM 2012, you simply add the Site Role called Endpoint Protection either on your CAS if you have one of those or on your Primary site Server. FEP is no longer a standalone installer and it is a released product and
    no longer Beta.
    Then the Endpoint Protection Client Settings will no longer be greyed out and you can deploy the System Center 2012 Endpoint Protection client.
    http://technet.microsoft.com/en-us/library/hh508760.aspx
    regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Lync 2013 client deployment via SCCM 2012 forcing restart

    All, 
    I am attempting to deploy the Lync 2013 x86 client via SCCM 2012 to 158 machines running the Office 2010 suite. My package runs, and the installs complete but they are forcing a restart after the install even though I have gone in to everything that I can
    think of to tell the install not to force a restart. I am a newb in the ways of SCCM so I have been self teaching, and I may have missed something. 
    I have gone into the config.xml and changed the value SETUP_REBOOT to NEVER. 
    In the program properties I have RUN set as HIDDEN, and AFTER RUNNING set to NO ACTION REQUIRED. 
    Is there something that I am missing to stop the users machine from restarting after the install completes?

    Great, unfortunately it will be because files (usually shared DLLs) are in use as Office is opened, despite it being an older version. 
    Agree it's not optimal, I usually just tell clients that they will need to reboot, or that it will push out overnight (when I schedule it) and their computer will restart, so make sure they save everything.
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)

  • Alert: Synchronization failure alert for software update point ( SCCM 2012 R2)

    SCCM 2012 R2
    Alert: Synchronization failure alert for software update point: MY.net(MY)
    Alert type: Software update synchronization failure
    Severity: Critical
    Active time (UTC): 13-09-2014 19:37:34
    Condition: Generate an alert if software updates synchronization fails for the Software Update Point role at the
    MY (MY) site.
    Alert Text: Software updates synchronization for the Software Update Point role at the
    MY (MY)) site failed.
    Please let me know what will be the cause of this Alert, how to resolve it

    The reason is stated in the message: "Generate an alert if software updates synchronization fails
    for the Software Update Point role at theMY (MY) site"
    Examine wsyncmgr.log
    Torsten Meringer | http://www.mssccmfaq.de

  • Understanding background work for software distribution in SCCM 2012

    Hi Team,
    1.I want to know site to site communication for SCCM 2012.. and
    2. want to know about package transfer to secondary site or content share background process.
    3. In many of the content share server 200 package out of this 90 still showing inprogress.. I checked distribution point but no error.. I checked conponent status " saying xxx001 package processed.
    Can some one answer this three question?

    Hi,
    Configuration Manager uses file-based replication to transfer packages between sites in your hierarchy.
    Reference:http://technet.microsoft.com/en-us/library/gg712701.aspx#BKMK_File_based
    The blog below is talking about the Site to Site Communication in SCCM 2007, but it can help you understand the process of packages transfer to secondary site.
    Understanding Site to Site Communication in SMS/SCCM
    http://blogs.msdn.com/b/steverac/archive/2010/07/16/understanding-site-to-site-communication-in-sms-sccm.aspx
    You could check Distmgr.log and sender.log to get more information. It should take some time in order to transfer so many packages.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for

  • External hard drive corrupted after trying to fix it, in macbook Disk utilities

    hello, After fixing my macbook internal drive with disk utilities, i put to verify my WD external hard drive,that acuse me some errors. Well i don´t no why but i put the disk utility run for de WD external drive. A few time later , shows up a message

  • K7N420-Pro TV-out Card

    Is the TV-Out Card any good?

  • Windows 7 Upgrade Disc in Parallels?

    Is it possible to start a VM in parallels using the windows seven upgrade, and not have a previous windows OS installed?

  • Using Flash Skins - any issues?

    Just upgraded from RoboInfo 5 to RoboHelp 7 (long overdue) I'm considering using a Flash skin, but am just curious if there's any issues in doing this. Is it possible to add a new menu button if I use a Flash skin (I have experience using Flash, but

  • Reg:Internal Order Settlement-1

    Hi Guru's while am settling the Internal Order the following issue is coming *Data inconsistency: Parallel depr. area is not posted Message no. AAPO104 Diagnosis For chart of depreciation 1000, you defined this area (or these areas) as parallel depre