Improvements for Maverick' Tags System
I really like the idea of tags, I was using them already in lion and so forth....but I was thrilled to hear that Apple decided to give it more attention in Maverick... Maybe my expectations were too high
Let's see....
I do like everything they did so far, but I do not understand why everytime they try to improve something, they automatically have to let go of things already there that were working fine : like a dot instead of the whole file name with color....why couldn't we choose between one or the other ?
I like the dot, but I also like the whole file name...
Then I love that I can create tags on any file directly, but when I manage my tags, why can't I create a new tag there ? I can't even open up the finder window large and long enough for me to see all my tags for ch.....t sake: I can not manage tags this way !
And I mean seriously : only 8 choices of colors really ? why could'nt I create any color I choose to ?
...and in my wildest dreams a system where I could choose an array of uploadable icons (not only a dot) in similar colors classified (called a "camaieux") ...
I did say my wildest dreams : maybe there's an app for that ?!?
BabaOo's dreams
Unfortunately S40v5 won't be gaining any of the major features found in S40v6 models. Time has moved on so if you want the features found in S40v6 devices you will need to buy one.
You are welcome to start a new thread giving suggestions about what you think should be added to the current (S60v6) or future operating systems.
Similar Messages
-
Any way to restore the ML color coding instead of the tag system in maverick
do not care for the tag system with maverick is there any way to restore the color tagging of the the entire file name with maverick
Path Finder, but may not be finally tested with Mavericks. And every update to the operating system has the potential to render third-party Finder replacement solutions inoperable or unstable.
-
Unexpected value type for Item Tag Name ; expected System.Single, received
Hi,
I am using PCo 2.1 with MII 12.1 to extract values from some PI tags. When I run the query, I get this error -
Unexpected value type for Item <Tag Name>; expected System.Single, received System.String[Value = Scan Off]
Can somebody explain what I need to do to get the correct result?
Regards,
Chanti.To make the service return "whatever is passed", you have to take a step back and realize that there is a little understanding of XML Schema required.
When using a complexType, which is defined as a sequence, then you are implying an ordered sequence of elements. Default value for the 'minOccurs' attribute is 1. It's also important to understand that there is a difference between minOccurs=0 and nillable="true".
nillable="true" just means that the name element can carry a null value. If you want the name element to be optional, then you must use the minOccurs=0 and keep the maxOccurs to it's default value of 1. Using an array is just a bad work around. This is for deserialization (XML to JAVA).
The second part of you problem is on the serialization (or JAVA to XML). When you have a JAVA Bean, there is no way to make the difference between a member's value being null or not set, so it's impossible to decide if you need to send back a nul (xsi:nil="true"), an empty element <ns1:name/> or nothing.
That said, if you do want to go the XML route, you can use the dataBinding="false" flag in the different WSA command. Instead of converting XML into JAVA, you will have SOAPElement parameters, where you can do all you want (see WS user's guide [1] for details - chapter 16). Note that you have to make sure that the WSDL (your contract) reflect what you are doing on the wire (format of your messages), so that you do not geopardize your interoperability with other toolkit.
Note that this only applies to literal message formats (use attribute in WSDL), which is your case.
Hope this helps,
Eric
[1] http://download-west.oracle.com/otn_hosted_doc/ias/preview/web.1013/b14434.pdf -
Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal account?You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com
-
Error while performing Risk Analysis at user level for a cross system user
Dear All,
I am getting the below error, while performing the risk analysis at user level for a cross system (Oracle) user.
The error is as follows:
"ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 120 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPJ2EDB" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.RC:1
Can anyone please help.
Regards,
GurugobindaHi..
Check the note # SAP Note 1121978
SAP Note 1121978 - Recommended settings to improve peformance risk analysis.
Check for the following...
CONFIGTOOL>SERVER>MANAGERS>THREADMANAGER
ChangeThreadCountStep =50
InitialThreadCount= 100
MaxThreadCount =200
MinThreadCount =50
Regards
Gangadhar -
Where are the epson drivers for Mavericks for the artisan 835
Where are the epson drivers for Mavericks for the artisan 835
OMT8 wrote:
Well, I have this printer too, and I get the following response from the System Prefs Printers and Scanners when I select to add this printer:
"The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
When you go to the Epson website for this particular printer it says:
"The latest drivers for this product are available only via Apple's Software Update."
And finally, when you go to Software Update it says: "No updates available"
I second OMT8.
Yes, the driver file at http://support.apple.com/kb/DL1398 allowed me to finally install my printer, but does Apple have _any idea_ how long it takes to download a 1.08GB file over a 1.5mbps DSL connection?
Never mind how much of my pricey new SSD is being consumed by the resulting 1.80GB of driver files all for _one_ printer driver that should maybe occupy 200K?
Or that the primary article on OS X printer drivers (http://support.apple.com/kb/HT3669) -- which does indicate that the Artisan 830 is supported -- does not mention or link to the driver file that's needed to make it work?
Or what a complete violation of Apple's "it just works" gestalt it is to be confronted with the above Catch-22 and to have to search the web and then go through all of the above to make a new laptop talk to a two-year-old printer?
Yes, my printer now works, and yes, Apple's Support Communities were instrumental in getting to this point. But spending all morning (plus download time) getting a printer driver installed tastes way too much like I paid for Apple and got Microsquish.
-carl- -
My computer - how can I improve for editing
I am a hobby-editor . . . :-)
Still I am curious to get some hints on which parts of my computer could be improved for video editing.
So hopefully someone here could have a look on my hardware!
Here are the specs: (in german!)
Mainboard:
Asus P6X58D-E
ATX, Sockel 1366, Intel X58 / ICH10R Chipsatz, DDR3-1600
Hersteller Asus
Modellbezeichnung P6X58D-E
CPU Sockel 1366
unterstützte Prozessoren Intel Core i7, Core i7 EE, Xeon (Nehalem)
Mainboard Chipsatz Intel X58 / ICH10R
BIOS Hersteller AMI
Formfaktor ATX
QuickPath Interconnect QPI (MT/s) 6400
ATX 12V Anschluss (8polig) 1
ATX 2.0 Anschluss (24polig) 1
Arbeitsspeichertyp DDR3
Arbeitsspeicher maximal (MB) 24576
Speichertakt (MHz) 1600/1333/1066 (2000* *OC)
Speichersteckplätze 6
Triple Channel Unterstützung vorhanden
PCI (32-Bit) Steckplätze 2
PCIe x1 Steckplätze 1
PCIe x16 2.0 Steckplätze 3
SLI / Crossfire Unterstützung 2/3 Way SLI/Quad CrossFireX
SATA Controller Intel ICH10R + Marvell® 9128
SATA Anschlüsse 6x SATAII + 2x SATAIII
SATA Protokolle SATAI-III
Unterstützte RAID Level 0,1,5,10
USB Protokolle USB 3.0/2.0/1.1
USB Anschlüsse extern 4x USB 2.0 intern + 4x USB 2.0 extern + 2x USB 3.0 extern
Soundchip Realtek® ALC889
Audiokanäle 8
SPDIF Ausgang 1x optisch, 1x koaxial
LAN Chipsatz Marvell 88E8056®
LAN-Ports 1
LAN-Transferrate (MBit) 10/100/1000
Anschlüsse für Lüfter 5
PS/2 Schnittstelle (Tastatur) 1
PS/2 Schnittstelle (Maus) 1
IEEE1394a Firewire Schnittstelle 1
CPU:
Intel Core i7 950 (3,06GHz)
Sockel 1366, Box - inkl. Kühler
Hersteller/Modellbezeichnung
Hersteller Intel
Prozessor Modell Core i7
Sockeltyp
Prozessor Typ - Taktfrequenz 950 (3,06GHz)
CPU Modellnummer BX80601950
Sockel 1366
Packungstyp Box - inkl. Kühler
Prozessorkern Bloomfield
Anzahl Kerne 4
QuickPath Interconnect QPI (MT/s) 4800
Cache
Energieverbrauch
L1 Cache (kB) 4 x 64
L2 Cache (kB) 1024
L3 Cache (kB) 8192
Energieverbrauch (Watt) 130
Herstellungsprozess (nm) 45
Kühler Original Intel Box Kühler
RAM:
6144MB DDR3 Kingston KVR1333D3N9K3/6G
DDR3 - 1333 (PC3 - 10600)
Hersteller/Modellbezeichnung
Hersteller Kingston
Herstellernummer KVR1333D3N9K3/6G
Technische Daten
Kapazität (MB) 6144
Kit bestehend aus 3 x 2048MB
Speichertyp DDR3
Speicherstandard DDR3 - 1333 (PC3 - 10600)
Anschluss DIMM 240-Pin
Timings
CAS Latency (CL) 9
RAS-to-CAS-Delay (tRCD) 9
RAS-Precharge-Time (tRP) 9
Festplatte:
1000GB Western Digital Caviar Black WD1002FAEX
3,5", Serial-ATA/600 (6Gb/s), 64 MB Cache
Hersteller Western Digital
Modellbezeichnung Caviar Black WD1002FAEX
Festplattenkapazität (GB) 1000
Formfaktor (Zoll) 3,5
Schnittstelle Serial-ATA/600 (6Gb/s)
Umdrehungen / Min. 7.200
Geräuschentwicklung Betrieb (dB) 33
Geräuschentwicklung StandBy (dB) 28
Max. Transferrate (lesen) MB/s keine Herstellerangaben verfügbar
Max. Transferrate (schreiben) MB/s keine Herstellerangaben verfügbar
Zugriffszeit (ms) 4,2
Cache (MB) 64
Gewicht (g) 690
Abmessungen (BxHxT) (mm) 101,6 x 25,4 x 147
ARLT Garantie Kein OEM. 5 Jahre Herstellergarantie. 3 Jahre ARLT Garantie davon 6 Monate Soforttausch bei Defekt
wegen mehr Platz, größerem Cache, halber Zugriffszeit und SATA3-Schnittstelle, Transfer Rate (Buffer To Disk) 126 MB/s (Max) - sehr guter Wert !
Brenner:
LG GH22NS 22/22/48/32 DVD-Brenner, S-ATA
Super Multi DVD-Brenner ? mit S-ATA Schnittstelle
INTERNER 22x/22x Super Multi DVD-Brenner mit SecurDisk Unterstützung. Der perfekte Alleskönner für Ihren PC. Brennt nicht nur die gängigen Formate (DVD+R/+RW,-R/-RW) sondern auch DVD-RAM und ist außerdem durch die Double/Dual Layer Funktionalität für die Zukunft gerüstetHersteller LG
Modellbezeichnung GH22NS40
Farbe schwarz
Bauart intern
Schnittstelle Serial-ATA
Formfaktor (Zoll) 5,25
Medienaufnahme Schublade
Puffer (Kb) 2048
Zugriffszeit CD-ROM (ms) 120
Zugriffszeit DVD-ROM (ms) 140
Zugriffszeit DVD-RAM (ms) 175
Lesen CD-ROM 48
Lesen DVD-ROM 16
Lesen DVD-RAM 5
Schreiben CD-R 48
Schreiben DVD-R 22
Schreiben DVD+R 22
Schreiben CD-RW 32
Schreiben DVD-RW 6
Schreiben DVD+RW 8
Schreiben DVD-R DL 10
Schreiben DVD+R DL 10
Schreiben DVD-RAM 12
Betriebs-LED vorhanden
Grafikkarte:
Gainward Geforce 9500GT
1024MB, PCIe 2.0, DVI, VGA, HDMI
Hersteller/Modellbezeichnung
Hersteller Gainward
Anschlussart PCI-Express 2.0
Stromversorgung
Maximaler Verbrauch bei Volllast (Watt) 75
GPU
GPU Hersteller NVIDIA
GPU Bezeichnung Geforce 9500GT
GPU Takt (MHz) 550
Kühlung passiv
DirectX Version 10
Shader Model Version 4.0
OpenGL Version 2.0
HDCP Unterstützung Ja
NVIDIA CUDA-fähig Ja
Grafikspeicher
Speicherkapazität (MB) 1024
Speichertyp DDR2
Speichertakt (MHz) 800
Speicheranbindung (Bit) 128
RAMDAC (MHz) 400
Dual-Link Unterstützung ja
unterstützte Auflösungen
Max Auflösung (dpi) 2560x1600x32Bit 60 Hz (Dual Link)
SLI / Crossfire Unterstützung SLI
Anschlüsse
DVI Schnittstelle 1
VGA D-Sub Schnittstelle 1
HDMI Schnittstelle 1
Unterstützte Betriebssysteme Windows XP, Windows Vista
Zubehör Treiber CD
Packungstyp Retail
Netzteil:
550Watt, ARLT Netzteil, 12cm Lüfter, 20+4pin, schwarz
Anschluß Mainboard
ATX (20pin. + 4pin. Buchse)
Anschlüsse Endgeräte
8x 4 Pin Stromanschlüsse (HDD), 2x 4 Pin Stromanschlüsse (FDD), 2x SATA Stromanschlüsse, 1x 6 Pin Stromanschluss (VGA), 1x 4 Pin Stromanschluss (CPU)
Eingänge
230V Netz
Leistung
550Watt
Lüfter
1x 12x12cm silent
Hersteller/Modellbezeichnung
Leistung
Hersteller Arlt
Modellbezeichnung LowNoise
Watt 550
Anschlüsse
ATX 12V Anschluss (4polig) 1
ATX Anschluss (20polig) 1
ATX 2.0 Anschluss (24polig) 1
S-ATA Stromanschlüsse 2
3,5" Anschlüsse 2
5,25" Anschlüsse 8
Eingangsspannung (V) 230
Sonstiges
Bauform ATX
Lüfter (mm) 120
CPU Kühler:
Scythe Mugen 2 Rev. B, CPU Kühler für Sockel 1366/1156/775/478/754/939/AM2/AM2+/AM3/940
Hersteller Scythe
Modellbezeichnung Mugen 2 Rev. B
Material Kühlkörper Kupfer / Aluminium
kompatible CPU Sockel 1366/1156/775/478/754/939/AM2/AM2+/AM3/940
Freigegeben bis (MHz) alle Taktraten
Lüfterdrehzahl (U/Min) 1400
Geräuschentwicklung Betrieb (dB) 26,5
Abmessungen (BxHxT) (mm) 130 x 158 x 100
Gewicht (g) 870
Besonderheiten bis zu 4 Lüfter verbaubar
mitgeliefertes Zubehör Backplates
Schrauben
Installationsanleitung
Luftdurchfluss (m³/h) 126
Kühlung aktiv
Cardreader:
Apacer AE700, Kartenlesegerät 30-in-1
intern, USB, Schwarz
Hersteller Apacer
Modellbezeichnung Embeded Card Reader AE700
Kartenleser Typ 30-in-1
Farbe (Gehäuse) Schwarz
Anschluss USB
Breite (mm) 101
Höhe (mm) 25
Tiefe (mm) 100
lesbare Formate
XD PictureCard ja
mini-/micro SD ja
SD Memorycard ja
MultimediaCard ja
Microdrive ja
MemoryStick ja
CompactFlash ja
OS:
Windows 7 Professional 64-Bit System-Builder-Version
Windows 7 Professional 64-Bit System-Builder-Version, EnglischHersteller Microsoft
Art der Software Betriebssystem
Datenträger DVD
Lizenz (Anzahl PC's) 1
Softwareversion OEM
Produktaktivierung erforderlich ja
2 x eSATA als PCIe:
Delock Controller Karte 2x eSATA, 2xSATA, 1x IDE
2x intern SATA oder 2x eSATA Spezifikation
1x intern PATA IDE Spezifikation
Datentransferraten:
SATA II bis zu 3 Gbps
PATA bis zu 133 Mbps
PCI Express x1 Standard
Unterstützt PCI Express 1.0a Spezifikation
Unterstützt bis zu 2 HDD am SATA, sowie 2 HDD am IDE Controller
Unterstützt Native Command Queue (NCQ)
Raid 0, 1
Festplatte:
2000GB Western Digital RE4-GP (WD2002FYPS)
3,5", Serial-ATA/300 (3Gb/s), 64 MB Cache
Hersteller Western Digital
Modellbezeichnung RE4-GP (WD2002FYPS)
Festplattenkapazität (GB) 2000
Bauart intern
Formfaktor (Zoll) 3,5
Schnittstelle Serial-ATA/300 (3Gb/s)
Umdrehungen / Min. 5.400 - 7.200 (dynamisch je nach Auslastung)
Geräuschentwicklung Betrieb (dB) 29
Geräuschentwicklung StandBy (dB) 25
Max. Transferrate (lesen) MB/s 110
Zugriffszeit (ms) 8,9
Cache (MB) 64
MTBF (h) 1.200.000
Gewicht (g) 730
Abmessungen (BxHxT) (mm) 101,6 x 26,1 x 147
Besonderheiten Energiesparende Green Power Festplatte
Please have a look at my system and give me ideas how I could eventuially improve it.
regardsI agree completely with Harm. A 550W PSU of average (or middling) quality like the one that you have (which, by the way, is based on a CWT PSH or PSH-II platform) is not quite enough to power a power-hungry CPU like the i7-950 of yours, especially if a better-performing GPU such as the the GTX 560 Ti that Harm suggested is added along with two or more additional hard drives. (Your system currently has exactly two hard drives, which is the absolute minimum that you should have in an editing system unless you want performance to be slower than an old Pentium 4. However, one of those hard drives spins at only 5400 RPM - far from ideal for an editing system. You really want all of the hard drives inside that system to spin at 7200 RPM.)
Speaking of the GTX 560 Ti, you don't need the one with 448 cores since a non-overclocked (read: stock speed) i7-950 can't take full advantage of that higher-end GPU (and please note that the GTX 560 Ti 448 is actually a GTX 570 with one of its shader units disabled whereas the standard GTX 560 Ti is a different chip altogether). The standard GTX 560 Ti, with its 384 CUDA cores and a 256-bit DDR5 memory bus width, would suffice. However, if you do wish to overclock the i7-950 (to at least 3.8GHz), then the 448-core edition of the GTX 560 Ti would make more sense. (The 9500 GT that you currently have is not only old, it's slow and weak as well: It has only 32 CUDA cores, and it uses really, really crummy DDR2 RAM with only a 128-bit memory bus width. Such a card would have made the GPU-accelerated mode significantly slower than software-only mode during certain operations within CS5.x.)
By the way, I was wrong six months ago about the Dell systems sold during Fall 2011 that came with a 1.25GB version of the GTX 560 Ti: I had assumed that that card had 448 cores. Well, I did more research, and discovered that there was an OEM version of the GTX 560 Ti which did use a 320-bit DDR5 memory bus - but it had only 352 CUDA cores. It uses the same GPU as the GTX 570 and GTX 580, but with only 11 of its 16 shader units enabled, making it a GTX 570 with four of that GPU's shader units disabled. The Dell version of the GTX 560 Ti is, indeed, only a 352-core unit that was based off of a GTX 570. That made the Dell GTX 560 Ti expensive for what it is - at around $300, it cost as much money as the 448-core version of the GTX 560 Ti sold for around that time. -
Process Improvement for Shopping Cart
I would like to have the availability to contact customer service regarding a recommended process improvement for Verizon customers. I have been a loyal Verizon since 2003, but my most recent experience is enough to drive me straight into the arms of T-Mobile and take them up on their offer to buy me out of all 6 contract agreements on my Verizon account.
I recently attempted to upgrade my device online. It was a relatively seamless process until I reached the end and got to the shopping cart. I elected to pick my phone up in the nearest store but to do so you have to pay online with a credit or debit card. You do not have the option to bill your account or pay in the store. As it turns out, the billing zip code that is associated with your credit card MUST match the service address zip code on your Verizon account. I am an identity theft victim and because of this all of my mail goes to a Post Office Box for security reasons. I obviously do not live in a Post Office Box, so my service address will never match the zip code on my billing address.
I am keenly aware that this is probably done for security reasons. Verizon doesn't want people obtaining a compromised account and sending a phone just anywhere. However, I was not opting to have anything shipped to me. I was picking up in the store so it should not matter what my billing zip code is.
The part that was most frustrating was the customer service individuals that I spoke with suggested things like (1) I should contact my bank and all of my bank statements and credit/debit card statements come to my house or (2) update my Verizon service address to the physical address of the Post Office even though I don't live there. When I was told to do option 2 listed above, I was told I had to log out of my account for the change to take effect and then re-log back in only to lose my entire order. All of this just to place an order and pick it up in a store. All I needed to do was just pay for my phone.
I next gave up and went in to the store. After an hour of waiting and trying to figure out where the problem was, the Verizon store couldn't take the coupon code that the customer service person had given me online. Translation - after all of this frustration with a dead-end result, I learned I was going to have to pay about $100 more for my phone. I walked away.
I went back online and the only option I had was to go back to square one and re-order online and this time, elect to have the phone shipped and billed to my account. I chose overnight shipping and just learned that the phone was shipped UPS ground and will be delivered after 5 days.
Needless to say, this has all been extremely disappointing and the most frustrating part is that it is all avoidable with a simple programming change. All of this was totally unnecessary. As an identity theft victim, I will NEVER have my mail delivered to the mailbox in my neighborhood. Does Verizon really want to offer that as a suggestion for people who want to buy a phone? Do they want to be responsible for the results? With identity theft being the fastest growing crime in America, somehow I just don't see that as a viable solution. There are many, many people just like me who don't have the same physical and billing addresses.
Finally, I will leave you with this question... Have you ever had this much trouble placing an order and paying for that order online? If I went to a store and purchased a phone in the store, would Verizon's payment processor care that the billing address on my credit card was different from the physical address where I live? NO! Companies are typically ready to take your money! It shouldn't be this hard to just pay someone for a phone.
If anyone can point me in the direction of how to make sure someone from Verizon Corporate is aware of this problem and that this is taken under consideration for future enhancements/changes to their eCommerce system it would be much appreciated.Hi,
I think your process level evaluation id is not true, that is the reason system skips the process level.. Can you check your evaluation event-expression code. What do you see in SLG1? For testing purpose change the evaluation id to 0EV000 and check. Make Sure you debug through the user(requester) that you are creating the SC. Please test and let me know...
Saravanan -
If i purchase os x server for mountain lion would i have to purchase it for mavericks again?
Want to study it now on my mbp and then use it with mavericks on mac mini in several weeks.
We don't know what Apple plans here for pricing nor for upgrade offers for Mavericks, if any.
AFAIK, no previous OS X Server upgrades have had upgrades; it's been a re-purchase.
Please check back after Mavericks is announced.
FWIW, OS X Server doesn't work all that well on a MacBook Pro or other portable computers, as OS X Server and most other server operating systems really prefer to have static IP and not DHCP-assigned dynamic addresses, and laptops tend to migrate from network to network and use DHCP. Haven't looked recently, but older versions of OS X Server expressly didn't support portable Macs, and for this reason. -
is it possible to get an anti-virus program for an obsolete operating system. Mine is windows xp 2002. i can't download a compatible service pack to compensate for the anti-virus program that i have or the one available for download provided by my internet server. are there any free, or for purchase, downloads available for the system i have. The anti-virus product i have says that i must have a service pack 2. the current one on my computer is service pack 1. The anti-virus provided thru my internet carrier says that i must have windows 7 or enternet explorer of at least 6.0 or higher or FireFox 3.6 or better, but i'm unsucessful with any attempts i've tried. so is there any help or i'm i stuck with this old system until my finances improve for a better one?
ThanksUnfortunately, there are many reasons why the PSE Editor might crash, and often it is hard to diagnose quickly the reason for the crash. Here are some steps you can take to try to fix the problem:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Editor_ crashes -
Proper settings for smartphone TAG videos
Does anyone have experience creating videos to be viewed using the Microsoft Tag system. I understand that it will be viewed through a URL, but I don't know what format is best for compressing the video? And is there a specific way the video is formatted to play back full screen or is that a function of the site it is housed on?
sorry... didn't mean to post this in the "compressor" board.
Message was edited by: vonpickler -
Maverick makes system unstable. Randomly reboots
After installing Maverick operating system, my system will randomly reboot. How do I troubleshoot this?
I also have the same phone, and have had multiple problems from day one, including rebooting, although not as often as yours. I actually took it in to the local store within the two week period, when you are supposed to get your phone replaced if it isn't working correctly. The young lady told me that she couldn't get it to do what I was telling her it was doing, which was that any time I speak on this phone, to this day, unless I put it on speaker, my face presses buttons and eventually cuts off the call! In addition, my phone repeatedly blurts out, very loudly, over and over "Verizon Wireless," for no reason that I can find. It drives me crazy!! This phone also constantly simply drops calls in the middle of a conversation, even on speaker. I won't bore you with the rest of the problems that I'm having with it, because it goes on and on. I am not willing to accept a "refurbished" phone, and have called Motorola, who has offered to repair my phone if I will send it to them, but Verizon is so far not willing to loan me a phone while mine is being repaired. I thought that I was realling upgrading from my Droid X, and now I'm very, very sad that I didn't just keep it.
-
I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?
Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
Good luck! -
Recovery disk assistant for Maverick
I installed Maverick without a hitch. I have Time Machine working. I want to create a Recovery Disk on a USB. I had previously done this under Mountain Lion using the Recovery Disk Assistant. When I open this program to create a new Recovery Disk (for Maverick) the program says
"The Recovery Disk Assistant creates a disk that you can use to recover your Mac OSX Lion system".
Since I no longer have OS X Lion, will this program still work?
Thanks
Doughttp://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html
http://arstechnica.com/apple/2013/10/how-to-make-your-own-bootable-os-x-10-9-mav ericks-usb-install-drive/
The latest version of Diskmaker X app, available here -
Minimum specs for Mavericks?
Apple says "If your computer can run Mountain Lion, it can run Mavericks".
Anybody with older machines have any horror stories before I decide to take the leap?
My specs:
Mid-2010 MacBook
2.4 GHz Intel Core 2 Duo
4 GB RAMRequirements here > OS X Mavericks: System Requirements
Your MacBook can definitely run Mavericks Sarah ..
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
I'm running Mavericks on a 2008 iMac with minimum requirements.
Good read before installing Mavericks > Get your Mac ready for Mavericks (OS X 10.9) | Macworld
Maybe you are looking for
-
I am relatively new Crystal reports 11 and am having problems creating a lsimple ine chart. I am trying to trend two types of network errors over time. The type of errors are in one field and the values are 1 or 2, I have two formulas, one converts a
-
Intercompany Sales triggers STO
Hello All! Could some Guru explain me why nobody uses the Item Category in Purchasing Document: Stock Transfer in the shedule line for do and Intercompany scenario? I mean why is not possible to do: Sales Order in company A Triggers STOreq in Company
-
My problem is that my ipad doesnt let me go in on goole it says check your connection. My other ipad works fine. Idont know what is the problem. Help please
-
Doubt in Submit...return
Hi all, i am trying a simple program .See below REPORT Ztest. data: begin of itab occurs 0, za(3) type c, end of itab. export itab[] to memory id 'ZPARA'. submit ztestcall and return. write:/ itab-za. In the pgm ztestcall, i have written
-
How to make Shape3D object translucent
Hi, How to make Shape3D object (like Box, Cylinder) translucent? I tried the below option but the box is not becoming translucent at all. final PhongMaterial redMaterial = new PhongMaterial(); redMaterial.setSpecularColor(Color.rgb(10, 255,