Improvements for s60v5

I believe that hardware of s60v5 is quite powerful but it is not being fully use. The things that I would like to have in s60v5 phones 1 support for apps like nokia social which integrate contacts with social sites. Another softs like bubbles, sleeping screen, augmented reality, etc 2.Improved gallery like photo browser from betalabs 3. Widget home screen: home screen of these phones offers enough functionality but no one would like to have just four shortcuts on big touch screen. More customization of home screen, ability to add widgets and move them.

Wether it is possible or not is somewhat irrelivent , it won't happen, the resources required are simply not practicle for Nokia's plans ! I'm sure there will be support and some improvements offered to S60v5 but the main support (untill it stops in 2014 will be for the current and future Symbian^3 phones. I have the N97 which I expect to remain as it is as the hardware is nor capable of any more performance than it already has, and NO software improvement can increase the size of the C memory. I also have the E7, which with the adequate memory and processing power is a thoroughly enjoyable experience. My suggestion would be to get one of the current range and enjoy what's left of Symbian development before it finally gets killed off !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Concept symbian belle for s60v5

i knew s60v5 devices cannot handle belle, but some of them they can handle. Like top bar, multi homescreen, all apps are out. Limitation: wallpaper changing when turn to next page, not support high quality game, and still s60 game type. Improvement: internet surfing, battery, speed.
Plz check if there is incorrect. Thank you
2. If you think belle is not ok for s60v5 and i will change to anna. Still limit like my belle concept, reduce motion, design portrait keyboard for s60 device, if you cant, you should use old traditional keyboard

Hi imohitraj,
Thanks for your post and welcome to the forum.
Please use the forum search function before posting as your question may well have been asked and answered before and so you will receive an answer straight away. See the forum guidelines if you have any questions on posting.
As to your question, Nokia Belle is not and will not be available to devices running S60 due to hardware differences between S60 and Symbian^3 (or better) devices.
Hope this helps,
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

My computer - how can I improve for editing

I am a hobby-editor . . . :-)
Still I am curious to get some hints on which parts of my computer could be improved for video editing.
So hopefully someone here could have a look on my hardware!
Here are the specs: (in german!)
Mainboard:
Asus P6X58D-E
ATX, Sockel 1366, Intel X58 / ICH10R Chipsatz, DDR3-1600
Hersteller      Asus
Modellbezeichnung      P6X58D-E
CPU Sockel      1366
unterstützte Prozessoren      Intel Core i7, Core i7 EE, Xeon (Nehalem)
Mainboard Chipsatz      Intel X58 / ICH10R
BIOS Hersteller      AMI
Formfaktor      ATX
QuickPath Interconnect QPI (MT/s)      6400
ATX 12V Anschluss (8polig)      1
ATX 2.0 Anschluss (24polig)      1
Arbeitsspeichertyp      DDR3
Arbeitsspeicher maximal (MB)      24576
Speichertakt (MHz)      1600/1333/1066 (2000* *OC)
Speichersteckplätze      6
Triple Channel Unterstützung      vorhanden
PCI (32-Bit) Steckplätze      2
PCIe x1 Steckplätze      1
PCIe x16 2.0 Steckplätze      3
SLI / Crossfire Unterstützung      2/3 Way SLI/Quad CrossFireX
SATA Controller      Intel ICH10R + Marvell® 9128
SATA Anschlüsse      6x SATAII + 2x SATAIII
SATA Protokolle      SATAI-III
Unterstützte RAID Level      0,1,5,10
USB Protokolle      USB 3.0/2.0/1.1
USB Anschlüsse extern      4x USB 2.0 intern + 4x USB 2.0 extern + 2x USB 3.0 extern
Soundchip      Realtek® ALC889
Audiokanäle      8
SPDIF Ausgang      1x optisch, 1x koaxial
LAN Chipsatz      Marvell 88E8056®
LAN-Ports      1
LAN-Transferrate (MBit)      10/100/1000
Anschlüsse für Lüfter      5
PS/2 Schnittstelle (Tastatur)      1
PS/2 Schnittstelle (Maus)      1
IEEE1394a Firewire Schnittstelle      1
CPU:
Intel Core i7 950 (3,06GHz)
Sockel 1366, Box - inkl. Kühler
Hersteller/Modellbezeichnung
Hersteller      Intel
Prozessor Modell      Core i7
Sockeltyp
Prozessor Typ - Taktfrequenz      950 (3,06GHz)
CPU Modellnummer      BX80601950
Sockel      1366
Packungstyp      Box - inkl. Kühler
Prozessorkern      Bloomfield
Anzahl Kerne      4
QuickPath Interconnect QPI (MT/s)      4800
Cache
Energieverbrauch
L1 Cache (kB)      4 x 64
L2 Cache (kB)      1024
L3 Cache (kB)      8192
Energieverbrauch (Watt)      130
Herstellungsprozess (nm)      45
Kühler      Original Intel Box Kühler
RAM:
6144MB DDR3 Kingston KVR1333D3N9K3/6G
DDR3 - 1333 (PC3 - 10600)
Hersteller/Modellbezeichnung
Hersteller      Kingston
Herstellernummer      KVR1333D3N9K3/6G
Technische Daten
Kapazität (MB)      6144
Kit bestehend aus      3 x 2048MB
Speichertyp      DDR3
Speicherstandard      DDR3 - 1333 (PC3 - 10600)
Anschluss      DIMM 240-Pin
Timings
CAS Latency (CL)      9
RAS-to-CAS-Delay (tRCD)      9
RAS-Precharge-Time (tRP)      9
Festplatte:
1000GB Western Digital Caviar Black WD1002FAEX
3,5", Serial-ATA/600 (6Gb/s), 64 MB Cache
Hersteller      Western Digital
Modellbezeichnung      Caviar Black WD1002FAEX
Festplattenkapazität (GB)      1000
Formfaktor (Zoll)      3,5
Schnittstelle      Serial-ATA/600 (6Gb/s)
Umdrehungen / Min.      7.200
Geräuschentwicklung Betrieb (dB)      33
Geräuschentwicklung StandBy (dB)      28
Max. Transferrate (lesen) MB/s      keine Herstellerangaben verfügbar
Max. Transferrate (schreiben) MB/s      keine Herstellerangaben verfügbar
Zugriffszeit (ms)      4,2
Cache (MB)      64
Gewicht (g)      690
Abmessungen (BxHxT) (mm)      101,6 x 25,4 x 147
ARLT Garantie      Kein OEM. 5 Jahre Herstellergarantie. 3 Jahre ARLT Garantie davon 6 Monate Soforttausch bei Defekt
wegen mehr Platz, größerem Cache, halber Zugriffszeit und SATA3-Schnittstelle, Transfer Rate (Buffer To Disk) 126 MB/s (Max) - sehr guter Wert !
Brenner:
LG GH22NS 22/22/48/32 DVD-Brenner, S-ATA
Super Multi DVD-Brenner ? mit S-ATA Schnittstelle
INTERNER 22x/22x Super Multi DVD-Brenner mit SecurDisk Unterstützung. Der perfekte Alleskönner für Ihren PC. Brennt nicht nur die gängigen Formate (DVD+R/+RW,-R/-RW) sondern auch DVD-RAM und ist außerdem durch die Double/Dual Layer Funktionalität für die Zukunft gerüstetHersteller      LG
Modellbezeichnung      GH22NS40
Farbe      schwarz
Bauart      intern
Schnittstelle      Serial-ATA
Formfaktor (Zoll)      5,25
Medienaufnahme      Schublade
Puffer (Kb)      2048
Zugriffszeit CD-ROM (ms)      120
Zugriffszeit DVD-ROM (ms)      140
Zugriffszeit DVD-RAM (ms)      175
Lesen CD-ROM      48
Lesen DVD-ROM      16
Lesen DVD-RAM      5
Schreiben CD-R      48
Schreiben DVD-R      22
Schreiben DVD+R      22
Schreiben CD-RW      32
Schreiben DVD-RW      6
Schreiben DVD+RW      8
Schreiben DVD-R DL      10
Schreiben DVD+R DL      10
Schreiben DVD-RAM      12
Betriebs-LED      vorhanden
Grafikkarte:
Gainward Geforce 9500GT
1024MB, PCIe 2.0, DVI, VGA, HDMI
Hersteller/Modellbezeichnung
Hersteller      Gainward
Anschlussart      PCI-Express 2.0
Stromversorgung
Maximaler Verbrauch bei Volllast (Watt)      75
GPU
GPU Hersteller      NVIDIA
GPU Bezeichnung      Geforce 9500GT
GPU Takt (MHz)      550
Kühlung      passiv
DirectX Version      10
Shader Model Version      4.0
OpenGL Version      2.0
HDCP Unterstützung      Ja
NVIDIA CUDA-fähig      Ja
Grafikspeicher
Speicherkapazität (MB)      1024
Speichertyp      DDR2
Speichertakt (MHz)      800
Speicheranbindung (Bit)      128
RAMDAC (MHz)      400
Dual-Link Unterstützung      ja
unterstützte Auflösungen
Max Auflösung (dpi)      2560x1600x32Bit 60 Hz (Dual Link)
SLI / Crossfire Unterstützung      SLI
Anschlüsse
DVI Schnittstelle      1
VGA D-Sub Schnittstelle      1
HDMI Schnittstelle      1
Unterstützte Betriebssysteme      Windows XP, Windows Vista
Zubehör      Treiber CD
Packungstyp      Retail
Netzteil:
550Watt, ARLT Netzteil, 12cm Lüfter, 20+4pin, schwarz
Anschluß Mainboard
ATX (20pin. + 4pin. Buchse)
Anschlüsse Endgeräte
8x 4 Pin Stromanschlüsse (HDD), 2x 4 Pin Stromanschlüsse (FDD), 2x SATA Stromanschlüsse, 1x 6 Pin Stromanschluss (VGA), 1x 4 Pin Stromanschluss (CPU)
Eingänge
230V Netz
Leistung
550Watt
Lüfter
1x 12x12cm silent
Hersteller/Modellbezeichnung
Leistung
Hersteller      Arlt
Modellbezeichnung      LowNoise
Watt      550
Anschlüsse
ATX 12V Anschluss (4polig)      1
ATX Anschluss (20polig)      1
ATX 2.0 Anschluss (24polig)      1
S-ATA Stromanschlüsse      2
3,5" Anschlüsse      2
5,25" Anschlüsse      8
Eingangsspannung (V)      230
Sonstiges
Bauform      ATX
Lüfter (mm)      120
CPU Kühler:
Scythe Mugen 2 Rev. B, CPU Kühler für Sockel 1366/1156/775/478/754/939/AM2/AM2+/AM3/940
Hersteller      Scythe
Modellbezeichnung      Mugen 2 Rev. B
Material Kühlkörper      Kupfer / Aluminium
kompatible CPU Sockel      1366/1156/775/478/754/939/AM2/AM2+/AM3/940
Freigegeben bis (MHz)      alle Taktraten
Lüfterdrehzahl (U/Min)      1400
Geräuschentwicklung Betrieb (dB)      26,5
Abmessungen (BxHxT) (mm)      130 x 158 x 100
Gewicht (g)      870
Besonderheiten      bis zu 4 Lüfter verbaubar
mitgeliefertes Zubehör      Backplates
Schrauben
Installationsanleitung
Luftdurchfluss (m³/h)      126
Kühlung      aktiv
Cardreader:
Apacer AE700, Kartenlesegerät 30-in-1
intern, USB, Schwarz
Hersteller      Apacer
Modellbezeichnung      Embeded Card Reader AE700
Kartenleser Typ      30-in-1
Farbe (Gehäuse)      Schwarz
Anschluss      USB
Breite (mm)      101
Höhe (mm)      25
Tiefe (mm)      100
lesbare Formate
XD PictureCard      ja
mini-/micro SD      ja
SD Memorycard      ja
MultimediaCard      ja
Microdrive      ja
MemoryStick      ja
CompactFlash      ja
OS:
Windows 7 Professional 64-Bit System-Builder-Version
Windows 7 Professional 64-Bit System-Builder-Version, EnglischHersteller      Microsoft
Art der Software      Betriebssystem
Datenträger      DVD
Lizenz (Anzahl PC's)      1
Softwareversion      OEM
Produktaktivierung erforderlich      ja
2 x eSATA als PCIe:
Delock Controller Karte 2x eSATA, 2xSATA, 1x IDE
2x intern SATA oder 2x eSATA Spezifikation
1x intern PATA IDE Spezifikation
Datentransferraten:
SATA II bis zu 3 Gbps
PATA bis zu 133 Mbps
PCI Express x1 Standard
Unterstützt PCI Express 1.0a Spezifikation
Unterstützt bis zu 2 HDD am SATA, sowie 2 HDD am IDE Controller
Unterstützt Native Command Queue (NCQ)
Raid 0, 1
Festplatte:
2000GB Western Digital RE4-GP (WD2002FYPS)
3,5", Serial-ATA/300 (3Gb/s), 64 MB Cache
Hersteller      Western Digital
Modellbezeichnung      RE4-GP (WD2002FYPS)
Festplattenkapazität (GB)      2000
Bauart      intern
Formfaktor (Zoll)      3,5
Schnittstelle      Serial-ATA/300 (3Gb/s)
Umdrehungen / Min.      5.400 - 7.200 (dynamisch je nach Auslastung)
Geräuschentwicklung Betrieb (dB)      29
Geräuschentwicklung StandBy (dB)      25
Max. Transferrate (lesen) MB/s      110
Zugriffszeit (ms)      8,9
Cache (MB)      64
MTBF (h)      1.200.000
Gewicht (g)      730
Abmessungen (BxHxT) (mm)      101,6 x 26,1 x 147
Besonderheiten      Energiesparende Green Power Festplatte
Please have a look at my system and give me ideas how I could eventuially improve it.
regards

I agree completely with Harm. A 550W PSU of average (or middling) quality like the one that you have (which, by the way, is based on a CWT PSH or PSH-II platform) is not quite enough to power a power-hungry CPU like the i7-950 of yours, especially if a better-performing GPU such as the the GTX 560 Ti that Harm suggested is added along with two or more additional hard drives. (Your system currently has exactly two hard drives, which is the absolute minimum that you should have in an editing system unless you want performance to be slower than an old Pentium 4. However, one of those hard drives spins at only 5400 RPM - far from ideal for an editing system. You really want all of the hard drives inside that system to spin at 7200 RPM.)
Speaking of the GTX 560 Ti, you don't need the one with 448 cores since a non-overclocked (read: stock speed) i7-950 can't take full advantage of that higher-end GPU (and please note that the GTX 560 Ti 448 is actually a GTX 570 with one of its shader units disabled whereas the standard GTX 560 Ti is a different chip altogether). The standard GTX 560 Ti, with its 384 CUDA cores and a 256-bit DDR5 memory bus width, would suffice. However, if you do wish to overclock the i7-950 (to at least 3.8GHz), then the 448-core edition of the GTX 560 Ti would make more sense. (The 9500 GT that you currently have is not only old, it's slow and weak as well: It has only 32 CUDA cores, and it uses really, really crummy DDR2 RAM with only a 128-bit memory bus width. Such a card would have made the GPU-accelerated mode significantly slower than software-only mode during certain operations within CS5.x.)
By the way, I was wrong six months ago about the Dell systems sold during Fall 2011 that came with a 1.25GB version of the GTX 560 Ti: I had assumed that that card had 448 cores. Well, I did more research, and discovered that there was an OEM version of the GTX 560 Ti which did use a 320-bit DDR5 memory bus - but it had only 352 CUDA cores. It uses the same GPU as the GTX 570 and GTX 580, but with only 11 of its 16 shader units enabled, making it a GTX 570 with four of that GPU's shader units disabled. The Dell version of the GTX 560 Ti is, indeed, only a 352-core unit that was based off of a GTX 570. That made the Dell GTX 560 Ti expensive for what it is - at around $300, it cost as much money as the 448-core version of the GTX 560 Ti sold for around that time.

Process Improvement for Shopping Cart

I would like to have the availability to contact customer service regarding a recommended process improvement for Verizon customers. I have been a loyal Verizon since 2003, but my most recent experience is enough to drive me straight into the arms of T-Mobile and take them up on their offer to buy me out of all 6 contract agreements on my Verizon account.
I recently attempted to upgrade my device online. It was a relatively seamless process until I reached the end and got to the shopping cart. I elected to pick my phone up in the nearest store but to do so you have to pay online with a credit or debit card. You do not have the option to bill your account or pay in the store. As it turns out, the billing zip code that is associated with your credit card MUST match the service address zip code on your Verizon account. I am an identity theft victim and because of this all of my mail goes to a Post Office Box for security reasons. I obviously do not live in a Post Office Box, so my service address will never match the zip code on my billing address.
I am keenly aware that this is probably done for security reasons. Verizon doesn't want people obtaining a compromised account and sending a phone just anywhere. However, I was not opting to have anything shipped to me. I was picking up in the store so it should not matter what my billing zip code is.
The part that was most frustrating was the customer service individuals that I spoke with suggested things like (1) I should contact my bank and all of my bank statements and credit/debit card statements come to my house or (2) update my Verizon service address to the physical address of the Post Office even though I don't live there. When I was told to do option 2 listed above, I was told I had to log out of my account for the change to take effect and then re-log back in only to lose my entire order. All of this just to place an order and pick it up in a store. All I needed to do was just pay for my phone.
I next gave up and went in to the store. After an hour of waiting and trying to figure out where the problem was, the Verizon store couldn't take the coupon code that the customer service person had given me online. Translation - after all of this frustration with a dead-end result, I learned I was going to have to pay about $100 more for my phone. I walked away.
I went back online and the only option I had was to go back to square one and re-order online and this time, elect to have the phone shipped and billed to my account. I chose overnight shipping and just learned that the phone was shipped UPS ground and will be delivered after 5 days.
Needless to say, this has all been extremely disappointing and the most frustrating part is that it is all avoidable with a simple programming change. All of this was totally unnecessary. As an identity theft victim, I will NEVER have my mail delivered to the mailbox in my neighborhood. Does Verizon really want to offer that as a suggestion for people who want to buy a phone? Do they want to be responsible for the results? With identity theft being the fastest growing crime in America, somehow I just don't see that as a viable solution. There are many, many people just like me who don't have the same physical and billing addresses.
Finally, I will leave you with this question... Have you ever had this much trouble placing an order and paying for that order online? If I went to a store and purchased a phone in the store, would Verizon's payment processor care that the billing address on my credit card was different from the physical address where I live? NO! Companies are typically ready to take your money! It shouldn't be this hard to just pay someone for a phone.
If anyone can point me in the direction of how to make sure someone from Verizon Corporate is aware of this problem and that this is taken under consideration for future enhancements/changes to their eCommerce system it would be much appreciated.

Hi,
I think your process level evaluation id is not true, that is the reason system skips the process level.. Can you check your evaluation event-expression code. What do you see in SLG1? For testing purpose change the evaluation id to 0EV000 and check. Make Sure you debug through the user(requester) that you are creating the SC. Please test and let me know...
Saravanan

Any room for improvement for this query? Explain Plan attached.

Is there any room for improvement for this query? Table stats are up-to-date. Any suggestions Query rewrite, addition of indexes,...etc ??
select sum(CONF
             when (cd.actl_qty - cd.total_alloc_qty - lsd.Q < 0) then
              0
             else
              cd.actl_qty - cd.total_alloc_qty - lsd.Q
           end)
from (select sum(reqd_qty) as Q, ITEM_ID as ITEM
          from SHIP_DTL SD
         where exists (select 1
                  from CONF_dtl
                 where CONF_nbr = '1'
                   and ITEM_id = SD.ITEM_id)
         group by ITEM_id) lsd,
       CONF_dtl cd
where lsd.ITEM = cd.ITEM_id
   and cd.CONF_nbr = '1'Total number of rows in the tables involved
select count(*) from CONF_DTL;
COUNT(*)
   1785889
select count(*) from shp_dtl;
COUNT(*)
    286675
Explain Plan
PLAN_TABLE_OUTPUT
Plan hash value: 2325658044
| Id | Operation                           | Name               | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                    |                    |     1 |    39 |     4 (25)| 00:00:01 |
|   1 | SORT AGGREGATE                     |                    |     1 |    39 |            |          |
|   2 |   VIEW                              |                    |     1 |    39 |     4 (25)| 00:00:01 |
|   3 |    HASH GROUP BY                    |                    |     1 |   117 |     4 (25)| 00:00:01 |
|   4 |     TABLE ACCESS BY INDEX ROWID     | SHIP_DTL           |     1 |    15 |     1   (0)| 00:00:01
|   5 |      NESTED LOOPS                   |                    |     1 |   117 |     3   (0)| 00:00:01 |
|   6 |       MERGE JOIN CARTESIAN          |                    |     1 |   102 |     2   (0)| 00:00:01 |
|   7 |        TABLE ACCESS BY INDEX ROWID | CONF_DTL           |     1 |    70 |     1   (0)| 00:00:01 |
|* 8 |         INDEX RANGE SCAN            | PK_CONF_DTL        |     1 |       |     1   (0)| 00:00:01 |
|   9 |        BUFFER SORT                  |                    |     1 |    32 |     1   (0)| 00:00:01 |
| 10 |         SORT UNIQUE                 |                    |     1 |    32 |     1   (0)| 00:00:01 |
| 11 |          TABLE ACCESS BY INDEX ROWID| CONF_DTL           |     1 |    32 |     1   (0)| 00:00:01 |
|* 12 |           INDEX RANGE SCAN          | PK_CONF_DTL        |     1 |       |     1   (0)| 00:00:01 |
|* 13 |       INDEX RANGE SCAN              | SHIP_DTL_IND_6 |     1 |       |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   8 - access("CD"."CONF_NBR"='1')
12 - access("CONF_NBR"='1')
13 - access("ITEM_ID"="SD"."ITEM_ID")
       filter("ITEM_ID"="CD"."ITEM_ID")

Citizen_2 wrote:
Is there any room for improvement for this query? Table stats are up-to-date. Any suggestions Query rewrite, addition of indexes,...etc ??You say that the table stats are up-to-date, but is the following assumption of the optimizer correct:
select count(*)
from CONF_dtl
where CONF_nbr = '1';Does this query return a count of 1? I doubt that, but that's what Oracle estimates in the EXPLAIN PLAN output. Based on that assumption you get a cartesian join between the two CONF_DTL table instances, and the result - which is still expected to be one row at most - is then joined to the SHIP_DTL table using a NESTED LOOP.
If above assumption is incorrect, the number of rows generated by the cartesian join can be tremendous rendering the NESTED LOOP operation quite inefficient.
You can verify this by using the DBMS_XPLAN.DISPLAY_CURSOR function together with the GATHER_PLAN_STATISTICS hint, if you're already on 10g or later.
For more information regarding the DISPLAY_CURSOR function, see e.g. here: http://jonathanlewis.wordpress.com/2006/11/09/dbms_xplan-in-10g/
It will show you the actual cardinalities compared to the estimated cardinalities.
If the estimate of the optimizer is incorrect, you should find out why. There still might be some issues with the statistics, since this is most obvious reason for incorrect estimates.
Are your index statistics up-to-date?
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

DMA Performance Improvements for TIO-based Devices

Hello!
DMA Performance Improvements for TIO-based Devices
http://digital.ni.com/public.nsf/websearch/1B64310FAE9007C086256A1D006D9BBF
Can I apply the procedure to NI-DAQmx 9? These ini-files dont seem to exist anymore in the newer version.
Best, Viktor

Hi Viktor,
this page is 7 years old and doesn't apply to the DAQmx.
Regards, Stephan

Improvements for Xen4 on latest kernel

I have installed Xen4.0.1 on Arch using this wiki article. This also means i had to use the kernel version included with the pkgbuild.
After downgrading udev to 151 (because the latest version causes some kernel panics), everything works like a charm.
A few days later, i read about Xen4 in a magazine. It stated that it should be possible to run Xen4 on kernel 2.6.36. But when i try to build the dom0 kernel on arch it fails. I googled for this problem and found something about "Jeremy's kernel". I tried to build the dom0 kernel with these sources, but it failed too. The magazine also stated that the latest kernel has some improvements for Xen, like PVUSB and PVSCSI.
The idea is to install Xen4 on a production server, so stability is criterion #1, but performance is also important. Could anyone advise me if i have to try and patch the kernel myself (code skills are ok, but almost no knowledge about linux kernels, so i can only 1. search on google, or 2. make minor syntax adjustements), or just use the old version.
Also, i'm still looking for a nice (web-based) administration for Xen. I found several, but most of them are for RedHat and the others just won't work.
Please tell me what the best option is, or maybe share something about how you have solved it in your own environment

Ok, so after removing catalyst-test and trying to install catalyst, I got the following error:
resolving dependencies...
warning: cannot resolve "catalyst-utils", a dependency of "catalyst"
:: The following package cannot be upgraded due to unresolvable dependencies:
catalyst
Proceeding to try installing catalyst-utils...

Need improve for messenger for iPad on keyboard

hi i want that messenger from ipad that i use bluetooth that i like press enter key it quicker way also i like use send on screen ok but when i am typing on bluetooth keyboard enter when i finish on edit box so i need it quick way can you add it 2 ways press on screen send and use bluetooth keyboard it better way hope u update for setting.
is there a way to use bluetooth to use flasher for deaf and hardhearing to use for face time or sorenson communication and also messenger it easy ti use attention on flasher to use bluethooth.
oh yeah the cable charger for ipad and iphone those cable charger keep loosing like fall off the plug on ipad it not lock to stay on it keep off falling it need to be improvement to use like click lock and use 2 fingers to press loose unlock cable off ipad it better way some of the cable is very poor can't stay on it no click it lock i have 1 click lock that i bought from amazon for tailgater speaker to use ipad that why it work lock it 2 way plug female and male to tailgater speaker so i was hope you get just male click lock that all.
hey i wonder can you make short cut screen for wi-fi and bluetooth on ipad home screen it easy way than setting too many list on it so it better get quick way to selection for bluetooth and wi-fi too.
i need for mail to add for junk mail or spam list too it better i hate annoy mail some of it so can you add it for mail to use junk mail and spam too...
i will add it later to have a improvement for ipad and accessories in future ok :).....

Tell Apple.
http://www.apple.com/feedback/

Restrictions Really needs improvement for Business use

Hi
We have written an app and are replacing our industry standard barcode scanning devices with over 100 iPod Touches worldwide using a third party barcode sled accessory. This is much cheaper (Around $800 vs $1500) and offers a much richer and less confusing user interface to the end-user. However our end-users are often low paid seasonal workers employed by our clients, so when it comes to the restriction settings in iOS we try to lock the devices down as much as possible.
I think more and more people are treating the iPod/iPhone/iPad in commerical environments and so the ability to secure and maintain these devices really needs to be improved. Our situation aside you can use your iPhone as a point of sale with a credit card swipe, if you have a retail chain with several of these devices for use by employees you don't want them to be messing around on them or making choices that you don't want them to purposfully or accidently.
For instance:
iOS6 upgrade seems to download automatically and prompt the user if they want to install. There is no way to turn updates off, and not even a password is required to do it. In my scenario if someone gets the upgrade push and then clicks ok they then can't work for 30 minutes, not good if there is a long line of people waiting to be served.
WiFi/VPN connections can be changed
Passcode lock can be turned on/off/changed
Date/Time / Keyboard / International / Accessibility settings can all be played with
Weather app always available
Stocks app always available
Maps can be used (location can be disabled at least!)
etc..
If I (as a developer) tell our deployment manager to tell our client's manager to tell their scanning manager to tell their temporary workers to not mess around with things like the above....someones not going to listen, and our IT department is just going to have to check each device and clean up.
I know that apple's portable devices are aimed more at consumers, but I personlly think it's about time that we have some more attention to more business scenarios.
I don't want to come accross negative so i'll finish by saying that a lot of the restrictions in place are very useful. Being able to disable the store, iTunes and safari are very big wins, without those we wouldn't have switched to iOS devices.
Anyone else have a similar need for more administrative ability?
Thanks for reading.

One of these might be good for a POS (assuming you need touch screen), but those are terrible for graphic artists to use. All-in-ones are to be put bluntly, over-priced pieces of junk with crappy power supplies and worthless integrated video cards. They will run too hot most likely and need maintenance more often than larger well-ventilated desktop towers. Your graphic artists staff will hate the small low resolution monitors as well as the lack of decent GPU acceleration. The only good thing about them is the small form factor, a sacrifice well worth looking past IMHO.
Graphic artists should be using high-end monitors, IPS panels for accurate colors and high resolution displays of 2560x1600 pixels. I strongly recommend looking at Dell's Ultra Sharp models (particularly the 30"). If you end up getting three Dell Ultra Sharps then you might as well get the whole system from them as well and develop some sort of professional relationship and support system like most businesses.
*The monitor should be the most expensive component by far and it is the most important for work productivity, do not skimp out here, you run a graphic design firm after all!
Look for reasonably priced desktops with 4-8GB RAM, Intel or AMD quad core processors. Stay away from discrete graphics, Photoshop uses GPU acceleration found on higher end video cards and it is useful. Larger hard drives perform better than smaller ones because of areal density, so buy larger hard drives than needed (1-2TB drives with 500GB or larger platters) and run them in RAID1 for redundancy, because I doubt you have a storage area network.

Suggestions for new features and improvements for Garageband

Hi,
I posted this to iCompositions but don't know who would be exposed to it as far as Apple goes. Just thought I would list a sort of wish list for GB that would make a huge difference for me.
Most are just basic interface improvements and changes. Some you may already be able to do and I'm unaware.
1. A click track option would be nice.
2. A space to write production notes as in guitar used and pickup used.
3. A Telecaster and Strat icon for the track icons.
4. When you duplicate a track it also duplicates the region(s) of the track.
5. An edit (highlight) button on a region to mark where editing needs to happen. This could be saved for future reference and quick navigation to.
6. More control over the loop button on tracks. If you want to move it to another section it ***** to get at both ends and drag it to where it needs to be.
7. Audio Interface volume booster. I don't get the same input from my M-Audio Ozone as I do via input of my guitar through a direct box. Not even close. Maybe it's my interface?
8. More than one effect(s) on the same track.
This is my wish list.
ej
G5 Mac OS X (10.4.9) PowerPC G5 Dual 2 GHz 1GB SDRAM

First of all, if you want Apple to listen to your suggestions, you better use the feedback forms, since this is a user forum and is very rarely visited by Apple employees.
As for your list: People in this forum have put together a huge wishlist which somehow differs from yours (see this thread, for example). Top of the list are midi export, variable tempo and volume and effect automation.
As for your no.8:
8. More than one effect(s) on the same track.
You can have up to 4 effects on each track (plus the not very effective compression slider), 2 of them are restricted to echo and reverb.

PRA - Process Improvement for Accounts Receivable and Taxes Payable

SAP PRA introduces process improvements to Accounts Receivable and Taxes Payable write off processes for small dollar line items. When small dollar line item amounts are within the user defined tolerances, these line items can be written off using a batch job, Auto Write Off.

Thank you Wolfrad-
It's a good start. I think the best method in creating roles is to create the name myself and add the t-codes pertaining to that function such as cash application and credit.
I have a list of t-codes (it says all FI transactions) but I don't see credit management t-codes like FD32. Does anyone have a list of credit management t-codes?
Thanks!
POINTS AWARDED

Improvements for Maverick' Tags System

I really like the idea of tags, I was using them already in lion and so forth....but I was thrilled to hear that Apple decided to give it more attention in Maverick... Maybe my expectations were too high
Let's see....
I do like everything they did so far, but I do not understand why everytime they try to improve something, they automatically have to let go of things already there that were working fine : like a dot instead of the whole file name with color....why couldn't we choose between one or the other ?
I like the dot, but I also like the whole file name...
Then I love that I can create tags on any file directly, but when I manage my tags, why can't I create a new tag there ? I can't even open up the finder window large and long enough for me to see all my tags for ch.....t sake: I can not manage tags this way !
And I mean seriously : only 8 choices of colors really ? why could'nt I create any color I choose to ?
...and in my wildest dreams a system where I could choose an array of uploadable icons (not only a dot) in similar colors classified (called a "camaieux") ...
I did say my wildest dreams : maybe there's an app for that ?!?
BabaOo's dreams

Unfortunately S40v5 won't be gaining any of the major features found in S40v6 models. Time has moved on so if you want the features found in S40v6 devices you will need to buy one.
You are welcome to start a new thread giving suggestions about what you think should be added to the current (S60v6) or future operating systems.

Improvements for Siri?

Voice recognition in general has come a long way however it's still got a long way to go.
Siri so far has shown itself to be quite superior but I have a few ideas how it could improve.
For the new next generation iPhone (i.e. iPhone 5) and iOS update Siri should be enabled with being able to store voice files.
The problem with voice recognition is that an accent can change if you are either from the city or the country from whichever country you come from.
So within your contact list there should be a record option.
For names that require a special pronounciation you can record they way it should sound and store it as part of the contact's details so that the next you tell Siri to call this person with your voice it will recognise and repeat the name (in it's own voice not yours) the way it is supposed to sound.
This works much the same way as making custom defaults for Keyboard shortcuts, if you can do this with words why not do the same with voiced words?
I know some of us who have friends with names that can be hard to pronounce become frustrated with and a little left out that our names mean that we can't indulge with the same convenience as someone named Simon or John.
Apple prides itself on personalising your device for the way that you want to use it and incorporating voice files as part of Siri would only prove this point. Plus programmers would not need to program all the different accent and words of the world into this possible new version of Siri.
I think that if this does become a reality then customers who have bought iPhone 4S should be allowed for this iOS update as well. I don't say this because I have one of my own (I only have a 4 at the moment ), it's just that Apple has 100's of millons of loyal customers millions of whom have already bought the 4S. They should not have to get a brand new product to enjoy the new software.
Apple has done this sort of thing before with the iPhone 3S when they introduced the iOS 4.0 and this sort of service I think should continue.
Anyway what do you guys think?
Any other ideas?

Maybe you should start your own thread and actually ask a coherent question instead of trying to latch on to one that's been dead for almost 3 years.

Improvements for IWork for iOS

I write to suggest improving your IWork for ios application.
The applications are very good, but lacks some important features that would help iPad -Iphone users to work better.
These absences are:
NUMBERS:
- filters
- sort by more criteria
- categories
- better use when a keyboard is attached in the iphone or iPad, it is no neccesary that the virtual keyboard appears all the time, please, let the user choose if he considers it is neccesary
- Landscape view in iphone
- Support for more functions
- Capacity to open bigger spreadsheets
I suggest to checo out the Polaris Office application, this one has some functions that are lacking in Numbers.
PAGES:
Please, a better way to insert: page jump, tab, etc. Maybe a button in the Toolbar.
IWORK FOR IPHONE: Besides the requirements listed above: a undo-redo button, because, it is very unconfortable to the user, shake his iphone when he has to undo or redo a lot of actions.
Thanks And
Best regards

https://discussions.apple.com/thread/4225179?tstart=0

Improvements for nokia s40v5 devices

Hi I was just thinking... I think this is a good idea for nokia and nokia users...
So here's what i mean... all of us have nokia phones right? some of us has nokia phones that runs the nokia s40v5 operating system right?so i was jus thinking...for the upcoming firmware updates for them, can you add some brand new features like "HomeScreen" which s40v6 has and s40v3 has it... why s40v5 doesn't come with active standby or homescreen?
here's another feature that you guys may like. In music player themes, instead of default music player themes installed on the phone like black, squares, sound waves, and some music player themes, the music player theme/background will be get in the themes (the .nth file)not in the mobile phone itself.
Another feature that you guys may like is the new gallery, just like the one's in nokia c1-01 and nokia c3-00.
Another one is the facebook client just like in nokia c3-00, x2-01.
another one is smart dialing, which is just like when you typpe 5555, the phone will say that's mom's number(09165555882).
Another one is the improved video recording... Instead of QCIF (176x144) resolution, use QVGA(320x240) or VGA(640x480) recording resolutions at 15fps and recording it with a mp4 codec... The video recording will result in crystal clear shots!!!
The one and the most important features that the s40 phones should get is multitasking... Yes you heard it right, multitasking. Just like in smartphones, nokia s40v5 devices should get multitasking. But always there's should be a limit to prevent the phone to crash although almost all nokia s40v5 phones has only 2.1mb of RAM(according to memoryUP pro application)...
If it's still possible, by only software update, the RAM may be increased for just like 10mb or more (phone memory will be used although we got memory cards right???)
what do you think guys and nokia developers, what do you think??? is this a cool idea???

Unfortunately S40v5 won't be gaining any of the major features found in S40v6 models. Time has moved on so if you want the features found in S40v6 devices you will need to buy one.
You are welcome to start a new thread giving suggestions about what you think should be added to the current (S60v6) or future operating systems.

Improvements for s60v5

Similar Messages

Maybe you are looking for