Improving the appearance of spreadsheets?

I am using an AppleWorks spreadsheet to keep track of websites I am submitting articles to. (By the way, I tried two "information manager" programs and neither had the capabilities of the 10+ year old AppleWorks!)
My question is, I know you can change the border of cells to dotted, solid or none, but is there a way to tint every other line in the spreadsheet for easier reading, or would I have to upgrade to a program like Numbers for this?
Secondly, if the non-numeric data is too long to fit in one cell, is there a way to keep it from looking like it's running into the next cell?

I used AppleWorks for years and I am not as negative as you are.
Maybe it's because I took time (which you clearly didn't) to *_read carefully Numbers User Guide_* and *_iWork Formulas and Functions User Guide_*
About the behavior of value expanding in cell to their right, Numbers and AppleWorks *_behave exactly the same way_*
For Numbers it's described in page #79 of the User Guide.
I guess that spill isn't an obscure word for an English user !
Using it as a keyword in a search quickly point to the relevant info.
Yvan KOENIG (VALLAURIS, France) samedi 19 février 2011 17:13:17

Similar Messages

How to Improve the Appearance of iPad Folders

I have created folders on my iPad each containing apps that are of a similar type (e.g., a folder named "Shopping" contains all of my shopping-related apps such as Amazon, Zappos, Groupon, Yelp). This is very handy, BUT these folders are very UGLY and the description is hard to read against the screen wallpaper.
Is there anyway to improve the appearance of these "Folder Icons"? Even if you could change the color of the font description (from the default white), this would be a big help. Another mobile operating system (Android 4.1.2) does this by displaying the icon of the first app in the folder as the icon for the folder along with the folder Description below the icons. This allows you to use a "representative icon" to remind you visually of the contents. There may be better solutions, but anything would be better than how the existing app folder appear.
If not available, I hope the iOS software engineers will either fix this or create a way for an app developer to create a way to improve the appearance (I couldn't find any app on the Apple Store which can help with app folder appearance).
Any help would be greatly appreciated. Thanks...

To give a suggestion to Apple use http://www.apple.com/feedback/ipad.html

How to improve the performance of adobe forms

Hi,
Please give me some suggestions as to how to improve the performance of adobe form?
Right now when I' am doing user events it is working fine for first 6 or 7 user events. From the next
one it is hanging.
I read about Wizard form design approach, how to use the same here.
Thanks,
Aravind

Hi Otto,
The form is created using HCM forms and processes. I' am performing user events in the form.
User events will doa round trip, in which form data will be sent to backend SAP system. Processing will
happen on the ABAP side and result will appear on the form. First 6 or 7 user events works correctly,
the result is appearing on the form. Around 8 or 9th one, the wait symbol appears and the form is not
re-rendered. The form is of size 6 pages. The issue is not coming with form of size 1 page.
I was reading ways to improve performance during re-rendering given below.
http://www.adobe.com/devnet/livecycle/articles/DynamicInteractiveFormPerformance.pdf
It talks about wizard form design approach. But in SFP transaction, I am not seeing any kind of wizard.
Let me know if you need further details.
Thanks,
Aravind

Oracle Report: Header not appearing in spreadsheet

Header section is not appearing in spreadsheet when I am running the report to print in spreadsheet

I am having a same issue. It skips the healer in Spreadsheet output. The reports server is 10g.
Do you have any workaround or solution for this?
Thanks,
Dean.

My MacBook Pro is running very slow is there anything I can do to improve the performance?

Is there anything I can do to improve the speed of my MacBook Pro?

Kappy's Personal Suggestions About OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utility is: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption. Drive Genius provides additional tools not found in Disk Warrior for defragmentation of older drives, disk repair, disk scans, formatting, partitioning, disk copy, and benchmarking.
Four outstanding sources of information on Mac maintenance are:
1. OS X Maintenance - MacAttorney.
2. Mac maintenance Quick Assist
3. Maintaining Mac OS X
4. Mac Maintenance Guide
Periodic Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) See Mac OS X- About background maintenance tasks. If you are running Leopard or later these tasks are run automatically, so there is no need to use any third-party software to force running these tasks.
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced after Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
Defragmentation
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive except when trying to install Boot Camp on a fragmented drive. But you don't need to buy third-party software. All you need is a spare external hard drive and Carbon Copy Cloner.
Cheap and Easy Defragmentation
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive. You will use Carbon Copy Cloner to create the backup and to restore it.
1. Get an empty external hard drive and clone your internal drive to the
       external one.
2. Boot from the external hard drive.
3. Erase the internal hard drive.
4. Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not depressed or is ghosted.
5. Click on the Clone button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the upward pointing arrow button.
After startup do the following:
Erase internal hard drive
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your internal hard drive (this is the entry with the
       mfgr.'s ID and size) from the left side list. Note the SMART status of the
       drive in DU's status area. If it does not say "Verified" then the drive is
       failing or has failed and will need replacing. SMART info will not be
       reported on external drives. Otherwise, click on the Partition tab in the
       DU main window.
3. Under the Volume Scheme heading set the number of partitions from the
       drop down menu to one. Set the format type to Mac OS Extended
       (Journaled.) Click on the Options button, set the partition scheme to
       GUID then click on the OK button. Click on the Partition button and wait
       until the process has completed.
Restore the clone to the internal hard drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not selected or is ghosted.
5. Click on the Clone button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.
Malware Protection
As for malware protection there are few if any such animals affecting OS X. Starting with Lion Apple has included built-in malware protection that is automatically updated as necessary.
Helpful Links Regarding Malware Protection:
1. Mac Malware Guide.
2. Detecting and avoiding malware and spyware
3. Macintosh Virus Guide
For general anti-virus protection I recommend only using ClamXav, but it is not necessary if you are keeping your computer's operating system software up to date. You should avoid any other third-party software advertised as providing anti-malware/virus protection. They are not required and could cause the performance of your computer to drop.
Cache Clearing
I recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, Mountain Lion Cache Cleaner 7.0.9, Maintenance 1.6.8, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Corrupted cache files can cause slowness, kernel panics, and other issues. Although this is not a frequent nor a recurring problem, when it does happen there are tools such as those above to fix the problem.
If you are using Snow Leopard or earlier, then for emergency cleaning install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (AppleJack works with Snow Leopard or earlier.)
Installing System Updates or Upgrades
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Backup and Restore
Having a backup and restore strategy is one of the most important things you can do to maintain your computer. Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner.
2. Deja Vu
3. SuperDuper!
4. Synk Pro
5. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space. Avoid installing utilities that rely on Haxies, SIMBL, or that alter the OS appearance, add features you will rarely if ever need, etc. The more extras you install the greater the probability of having problems. If you install software be sure you know how to uninstall it. Avoid installing multiple new software at the same time. Install one at a time and use it for a while to be sure it's compatible.
Additional suggestions will be found in:
1. Mac OS X speed FAQ
2. Speeding up Macs
3. Macintosh OS X Routine Maintenance
4. Essential Mac Maintenance: Get set up
5. Essential Mac Maintenance: Rev up your routines
6. Five Mac maintenance myths
7. How to Speed up Macs
8. Myths of required versus not required maintenance for Mac OS X
Referenced software can be found at CNet Downloads or MacUpdate.
Add more RAM or run fewer applications concurrently.

Important!! Improve the life and performance of the battery.

Reduce the operating temperature and increase battery life
The battery in your notebook PC is designed to provide the necessary amount of energy for the processor while maintaining HP high safety standards. As a result, the battery may not charge or may stop providing power to the notebook when the battery temperature exceeds the specified, design safety level.
If the battery life appears shorter than normal, the battery stops charging before it is 99%-100% full and the battery appears warmer than usual, the battery has most likely reached its designed "no charge" safety state. The battery will no longer charge until the temperature condition is corrected.
Try one of the following methods to correct the battery temperature:
When charging the battery, do not use applications that require large amounts of system resources such as graphic or memory intensive applications, heavy and extended hard drive usage.
Turn off your notebook and remove the battery to allow it to return to a safe operating temperature.
Make sure the notebook PC is operating on a hard surface. Using the Notebook PC on a bed or sofa may block the vents causing the notebook PC to heat up and shut down.
By taking these steps, the battery will return to its normal operating temperature range and continue to charge and discharge as designed.
Calibrating the battery while PC not in use
Recalibrating the battery requires a cycle of a complete charge and a complete discharge. To recalibrate the battery while using the PC is not is use complete the following steps.
The recalibration may take 1-5 hours depending on the age of the battery and the configuration of the notebook PC you own. The PC should not be used while you perform the following steps. Completing all the following steps will also calibrate the battery so that the power meter readings are accurate.
Shut down the notebook PC
Connect the AC Adapter to the notebook PC and to an electrical socket.
Charge the Notebook PC until the Battery Charge light is Green. This indicates the battery is completely charged.
Press and release the Power Button to start the computer.
Press the F8 key several times when the HP Logo displays.
When the Windows Advanced Startup Menu displays, select the Startup in Safe Mode option.
Remove the AC power adapter from the notebook PC.
Allow the battery to discharge completely until the notebook PC turns off.
The battery is now calibrated and the battery level reading on the power meter is now accurate.
If you are not using the notebook regularly then please unplug the AC adapter and shut down the notebook. By following these practices will improve the life and performance of the battery. Here is a quick list of Do's and Don'ts for the care of your Li-On batteries:
Do's
When you receive a new Notebook or Tablet PC, leave the battery to fully charge overnight.
Condition a new battery by using it until it is fully discharged, and then re-charge it fully. Doing this once a month will help to accurately calibrate your battery.
Always ensure the battery is recharged as soon as possible after it becomes fully discharged. A battery will be permanently damaged if left for an extended length of time in a fully discharged state.
Remember that a Lithium-Ion battery will slowly deteriorate; a new battery will always perform better than one that is 6-months old.
Remember that the battery half-life is rated for a certain total number of charge/discharge cycles (see your User Manual or Quick Start Guide for the rating). For example, a battery that is rated for 3 hours and 500 charge/discharge cycles, will still be considered as within specification, even if it only lasts for 1 hour 45 minutes after 500 charge/discharge cycles.
Heat is the worst enemy of a battery. Allow plenty of air to circulate around the Notebook/Tablet PC, so that the battery is kept as cool as possible when charging and also when in use. If provided, use the integrated 'legs' under the Notebook to raise the notebook and improve air circulation.
Remove the battery if storing for several months (the battery should be at approximately 50% charge or higher).
If you use a NoteBus or if charging your Notebooks or Tablet PCs in a confined space, allow for adequate ventilation in order to keep the batteries as cool as possible.
Don'ts
Do Not - Expose the battery to excessive heat or cold (i.e. outside the range of 10-35 degrees Centigrade ambient).
Do Not - Store the battery in a fully charged state (store batteries with about 50% charge).
Do Not - Allow a nearly flat battery to be unused for more than a month or so. The battery will slowly discharge until it becomes fully discharged and this will permanently damage the battery cells.
Do Not - Charge your Notebook/Tablet PC inside a carry case - the battery may overheat.
Do Not - Charge your Notebook/Tablet PC when stacked on top of each other - the battery may overheat.
Remember: Your battery is slowly degrading all the time, even if it is not used. Keeping your battery as cool as possible will slow down this degradation considerably.
For more information please visit the following links:
How to Improve the Performance of the Battery
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01297640&cc=us&lc=en&dlc=en
10 Tips to make your Laptop Battery last longer
http://labnol.blogspot.com/2006/03/10-tips-to-make-your-laptop-battery.html
Disclaimer: By clicking on the link above, you will be leaving HP.com to visit a web site that is not maintained by HP and where the HP privacy policy does not apply. This link is provided to you for convenience and does not serve as an endorsement by HP of any information or contacts that you may find on this non-HP site.
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

I hope the above article will help you guys..
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

How to improve the screen and audio quality on my Satellite c655-s5132

I recently bought a used Satellite C655-S5132 laptop. Although this machine is designed to run on Windows 7, it came equipped with Windows XP. The machine runs OK except for the screen which shows a distorted image and the sound which is tinny and low volume.
I suspect this is due to a software shortcoming rather than a defect in any of the hardware. The image distortion may be due to the fact that this laptop comes with a wide screen with an aspect ratio of 6:9, whereas the Windows XP operating system that is currently installed on this laptop is set at an aspect ratio of 4:3 and doesn't allow me to switch to the other aspect ratio.
As a result, the image fills the entire screen but appears to be stretched horizontally. As for the audio, I checked the volume settings and they are all set at their upper limit.
I have done the following:
1. I did a system check which shows that there are 2 drivers that need to be updated: video controller and video controller (VGA compatible). But when I prompt the machine to install updated drivers it gives me a failure code 28 "device not installed properly".
2. I ran 2 driver software programs: one shows that for both video controllers "the manufacturer is unknown" and "drivers are not installed", and the second shows that the driver is installed but needs to be updated.
3. Searched the web for the right drivers and found that for this machine running on Windows XP (32 bit), Intel produces a graphic driver, GMA 4500.
4. I tried to download this driver from the Intel website but the installation process failed. Perhaps it failed because Toshiba has specified a custom version of this graphic driver that can only be downloaded from its own website.
5. I searched the Toshiba website but was unable to identify the drivers for sound and image for this machine.
Could anyone help me find the right drivers on the Toshiba website that would allow me to: (i) change the setting for the aspect ratio and in doing so get rid of the image distortion, as well as improve the overal picture quality, and (ii) increase the audio volume and improve the overall sound quality?
Thank you.

Satellite C655-S5132
Downloads here
My advice is to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
You can obtain recovery discs from Toshiba. Scroll down to Get Recovery Media here .
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 71 of the User's Guide.
Satellite L640/L650 Series User’s Guide
-Jerry

Change the appearance of a 'saved search stack' in dock

Hi,
I read a hint on Mac OS X Hints which I particularly like, allowing for a saved search in the dock to behave as a stack showing all recently used documents. See here for the original hint.
The problem I have is that the icon of this stack is a drawer with papers in it. It looks really out of place next to my other stacks, so I would like to customise it. I have changed the icon of the entry in ~/Library/Saved Searches, but that doesn't get reflected in the dock. I have looked at ~/Library/Preferences/com.apple.dock.plist, but there is no reference to an icon in there that I could potentially change.
How do I change the appearance of a 'saved search stack' in the dock!?
thanks,
Rob

Donald
I agree with you that this is not good design and only adds to the confusion of new users, not lessens it.
It also makes more steps for experienced users.
Still it is what it is. Personally I'm sticking with Snow Leopard. After all the anticipation I found Apple has screwed up Lion and it is looking like their version of Vista. A rearrangement of the deckchairs to distract you from the gaping hole in the side of the ship, and that the Shipping Company has decided they are switching to other businesses.
Save a version is Save, and OSX handles all saves using versions you can step back through.
Duplicate is Save as with an extra step inbetween where the file has another name that you need to change. btw also lacks a shortcut. Nice one Apple.
Revert has always been there in OSX and was one of the few improvements in that it consistently lets you go back to your last saved version.
Peter

How to increase/improve the resolution ?

Hi there,
I have this old video & I check the resolution is only something like 400 x 288. If i use it on my sequence (which is set at 1920 x 1080), it will be very blur.
Any recommendation to increase/up/improve the old video to 1920 x 1080 ?
Thanks

There is nothing you can do.
The video will always be of 400x288 quality so it doesn't rally matter how you enlarge it.
You could try using the Brightness, Contrast and Sharpness controls to imprrove the appearance though they might make matters even worse.
It's something you will have to try for yourself but you will probably find that it has been a waste of time.

Improve The Current Implementation Of A Simple JQuery Filtering Engine

The filtering option on my site appears to be behaving erratically, and not returning the closest result (i.e. items that best match the set filters), but rather "generalising" across the board. I think that this is down to the manner in which
I have implemented the if-else statement that handles the filtering. I think that it would work well if there was just one option, but now that there are multiple, any options selected later would simply be overridden by earlier ones.
What would be the best way to improve the current implementation of my filtering engine, so that it would make matches more effectively?
$('body').on('click', '#reset-button', function (event) {
$('.rideshare-item').show();
$('body').on('click', '#search-button', function (event) {
// Collect values
var date = $('.date').val().trim();
var time = $('.time').val();
var seatsAvailable = $('.seats-available').val();
var womenOnly = $("input[name='women-only']:checked").length ? "Yes" : "No";
var luggageSpace = $("input[name='luggage-space']:checked").length ? "Yes" : "No";
$('.rideshare-item, .no-result').hide();
$('.rideshare-item').each(function (a, b) {
var rideshareDate = $(b).data('date');
var rideshareTime = $(b).data('time');
var rideshareSeats = $(b).data('seats');
var rideshareWomen = $(b).data('women');
var rideshareLuggage = $(b).data('luggage');
if (date.length == 0) {
$(this).closest('.rideshare-item').show();
} else if (date.length > 0) {
var timestamp = Date.parse(date)
if (isNaN(timestamp) == false) {
if (parseDateEntry(date).getTime() == parseDateAttribute(rideshareDate).getTime()) {
$(this).closest('.rideshare-item').show();
// additional if-else statements can be found on the jsfiddle
if (rideshareSeats > seatsAvailable) {
$(this).closest('.rideshare-item').show();
if (womenOnly == rideshareWomen) {
$(this).closest('.rideshare-item').show();
if (luggageSpace == rideshareLuggage) {
$(this).closest('.rideshare-item').show();
The jsfiddle here contains a working example:
http://jsfiddle.net/gpk1f11o/

and...

Improving the performance of a progarm

How would you go about improving the performance of a progarm which selects data from MSEG & MKPF ?

Hi Ramesh,
I don't know your problem, but try to make less access to database as possible (probably is better to put all of possible data you need in a internal table for each table).
Pay attention in the "select" statment to put the conditional field in the same order they appear in MSEG and MKPF.
Have you make an abap runtime analusis (SM30) to understand if the problem is on database access or in the program?
Bye
enzo

Improving the performance of a Program

How would we go about improving the performance of a Program which selects data from MSEG & MKPF?

Hi Ramesh,
I don't know your problem, but try to make less access to database as possible (probably is better to put all of possible data you need in a internal table for each table).
Pay attention in the "select" statment to put the conditional field in the same order they appear in MSEG and MKPF.
Have you make an abap runtime analusis (SM30) to understand if the problem is on database access or in the program?
Bye
enzo

How to improve the battery life after upgrading 3gs to ios5, how to improve the battery life after upgrading 3gs to ios5

how to improve the batter life 3gs phone on ios5 os

Also you may want to check a few things if you have location service turned on for Weather app, cuz every time you check your notification center, it will always check your location for the current update on the weather. If you are in the same location the entire time, you really don't need that on. Also while you are on the location service setting, check some of the apps that uses location service and if you don't use it, then turn it off while you are in there. Also maybe turn them all off and then turn on one at a time and find the culprit.
If it's not your location service, it could be that one your apps is running in the background. Double click home button, this will bring up the recently used tray, hold one of the app for 3 seconds until the - button comes out, then close all the apps. Or just do a hard reset of your iphone by holding the power button and the home button at the same time for 10-15 seconds until the apple logo appears.
Anything that will require to data connection will use battery. If you have wi-fi at home, then I suggest you keep it on wi-fi because your iphone will last longer if it's on wi-fi then on battery.
If none of the above suggestion worked, then I suggest you try restoring your phone and set it up as new and see what happens. Just make sure you have a separate back up for your contacts.

HT1338 how can I improve the speed of my Macbook? It's become incredibly slow...

how can I improve the speed of my Macbook? It's become incredibly slow...

Hi,
Troubleshooting Steps are... Restart... Reset... Restore from Backup... Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
http://support.apple.com/kb/HT1414
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
iPhone Syncing
http://www.apple.com/support/iphone/syncing/

I have OSX 10.7.5, my idvd is not working correctly. Should I re-download this version again , do you think that it will help to improve the idvd operation?

I have OSX 10.7.5 on my imac, my idvd is not working correctly. Should I re-download this version again , do you think that it will help to improve the idvd operation?

First, iDVD is not and never has been part of OS X. If iDVD is not working correctly, then you should investigate possible problems with that application, support files, preferences, or cache.
Of course you can always reinstall OS X if you wish:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Improving the appearance of spreadsheets?

Similar Messages

Maybe you are looking for