Improving timing and solving tempo issues in Logic

Hello, I was reading something about the beat mapping in user manual and also I was trying to improve timing of my drums recording but with no result. Is beat mapping the right tool for doing this and if so, what are the right steps to do it? Please, help.

Beatmapping will enable Logic to adapt to subtle or radical tempo changes like they happen in non quantized music or material which wasn't recorded to a click. I think what you are looking for is a way to improve the timing of your recorded drums. Check out the Strip silence function which will slice up your Audio into smaller regions detecting transients and silence. These newly created regions can then be quantized in various ways in the Region event editor.
Also in the sample editor->Factory->quantize engine you'll find some tools which claim to improve timing of Audio files but I wouldn't really advise you to use them.

Similar Messages

Is anybody else getting external MIDI clock tempo issues using Logic Pro 9 and OSX Lion 10.7.5?

I am having really serious tempo issues when sending midi clock to any external device - The tempo wavers and alternates around 5 bpm above and below the tempo set, and to be frank is totally unuasable when trying to clock arps from hardware synths.
I have the problem both with Logic and Ableton LE, as well as through both my MOTU Ultralite and Focusrite Liquid Sapphire 56 interfaces. I am therefore presuming this is a MIDI issue with the actual computer (MacBook pro, bought new last september).
I moved to Mac from PC, so I'm not totally up to scratch with the Mac architecture yet - can anybody shed any light on why this is happening? It's driving me mad!

Pancenter,
Yes.. I do see the occasional minor variations much like yourself when I sync up to my Oasys or more usually the Motif... to a fair sized and complicated project,,. Maybe +/- 1.. or on rare occasions +/- 2 bpm... but nothing close to the OP's +/- 5 bpm experiences...
It actually got better for me when I installed 10.8.x... along with the newest Motu drivers.. and in fact I can't remember the last time I had any unworkable issues with syncing though admittedly I haven't done that much syncing recently.
I do have a project coming up in the next 10 days.. that will require me to use the Oasys synced to Logic so I'll make a note of any issues i have and post back if any occur.
As an aside, I have recently been doing a lot of work with iPad Instruments and Arp Apps and Logic... and the sync as been rock solid over USB...

View this link and solve my issue PLS!

Since no one has answered my question, I am providing a link
that may shed some light on my issue. When the link opens the four
panels will animate. What I don't want is for them to animate at
the same time. What I do want is to animate in a sequence, 1, 2 , 3
, 4. I've tried using the timeline to solve this issue but the
animation goes haywire. PLS, oh PLS can someone help me?
http://img135.imageshack.us/my.php?image=ccbackupsite8ma.swf

Wynterian,
Without seeing the actual file, and taking a guess here, I
would take each link and turn them into seperate movie clips or
place them all in one movie clip and then place them into the main
movie. But, I would offset in the timeline each movie clip by
however many FPS you have your movie. For example, if your movie
FPS is 25, link one would start on frame 1, link 2 would start on
frame 25, link 3 on 50, and link 4 on frame 75. This would make for
a one second interval between each link opening on your main movie.
Hope this helps!
Tegan

VB Script to connect to Windows Servers (2000/nt/2003/2007) machine and Solve Performance Issues

Hi,
I am looking to develop a vbscript to connect to Remote Windows Server and solve the problems related to
CPU Utilization being high and Disk is running out of space.
I am planning to call that vbscript from a c# application.
Please help me with your expert inputs.
Thanks and Regards
Subhash

Could you please let me know the things to consider while solving the Disk is running out of space and cpu utlization problem.
There are way too many possibilities to list, especially without knowing the specifics of your systems.
Here's a link to the Scripting Guy's forum, but I highly suggest thinking through your question more thoroughly before posting there. As well, you'll need to post your current script.
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc&brandIgnore=true&page=1
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

Daily activity help for script... and investgating some issue

hi
i am new to apps.i fil i need some script to solve some daily activity issues and solving some issue.
can anyone help me or list of issue(s).I know it may different from site to site but i want very common list.so that issues could be resolved quickly.
regards

hsawwan wrote:
Hi,
invalid object lists and number.Query dba_objects for invalid objects and compile it either manually or via adadmin.yes. i know but i need to schedule this with scripts so that it will compile jar files,invld obj etc.
>
failing patches.Check the patch log file.
diagonostics failed patches.Check the patch log file as well as the workers log file.where is the worker logfile?
>
backup of archivelog and database.Test the backup periodically.how?
>
gathering statistics for apps and dadatabase users.Schedule "Gather Schema Statistics" concurrent program on regular basis.option is dbms_job right?
>
specific concurrent manager/log lists for specific requests.Check the CM log file along with the failed request log file.i notice FND<sum number>.log usually created for this but for specific log file is needed to query from db.for this reason i want to use some scripts.
>
shrinking apps tablespaces to utilise the spaces and enhancing the performance of apps.Shrinking tablespaces does not enhance performance.
may not enhance performance but may enhance the disk space.
See (Note: 122669.1 - How to Perform a Health Check on the Database).
monitoring alerts.
monitoring forms and report and generating trace files.You can do from OAM.
monitoring triggers Write an alert to notify you in case the status of the triggers changed.
startup total apps and shutdowns total apps (this actually sysadmins of clients want)Usually, we review the startup/shutdown scripts log files.
total cloning process within a night.You will have to review the log files.
Thanks,
Hussein

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

Can anybody explain what is support for ADF Project and to solve the Issues

Hi,
I am new to ADF and i am currently associated to ADF Support Project.
Can anybody explain what is support for ADF Project and to solve the Issues when the ADF Project is in Live.
we are getting the Tickets for the Issues.
Thanks in advance.

I agree with Timo.
It depends on the size of the project, user base, technologies, etc. We use lot of technologies in fusion middleware stack. We get tickets in many areas.
In your case, it could be anything like user training issues (user may not know how to use the some system features), browser issues like blank screen, bugs in code like JBO errors (failed to validate, another user has changed row, failed to lock the record, NullPointerException, IllegalArgumentException etc), business logic issues, page may not render properly, performance issues, partial commit issues, application server issues, authentication issues. If you use web services you might get web services related problems.

Logic Mics, Aggregate Devices and The Input Issue

There is a lot of discussion about Logic's inability to accept simple microphone inputs, and I ran into this for two frustrating DAYS of trying all the things in the Logic Express 8 Docs to fix it—to no avail.
But now it is solved, so I'm trying to create a DEFINITIVE list of steps and principles here so others may quickly blast past this issue.
The equipment I have seems to be emblematic to the problem. The Blue Snowball is one of those USB mics that simply doesn't automatically show up in Logic's Preferences > Devices > Core Audio >Device list. The fix for this is never mentioned in the Logic manual or Getting Started docs that I can find. There is a passing reference on page 100 that is virtually zero help, and does not bother to mention how this Prime Gotcha can bring you to your knees.
Principle #1: Logic uses the Preferences > Devices > Core Audio >Device (list) process to identify which microphone you can record with. The list has to have in it an entry that makes sense for both the incoming audio and the playback path that Logic uses to feed earphones or an external monitor.
Normal items on that list look like this:
Built-in Output/Line Input
Built-in Output/Digital Input
Built-in Line Output/Input
Built-in Line Output/Digital Input
Built-in Digital Output/Line Input
Built-in Digital Output/Input
The Built-in Output is the computer’s inner speaker or headphones. The Built-in Line Output is the computers stereo jack for feeding to an amplifier. The Built-in Digital Output is the fiber optic feed that can also feed an amp with up to six parallel audio channels (okay, 5.1 channels).
Nothing on that list will show a fully functional USB microphone that is being viewed on the computer’s System Prefs > Sound > Input page, even though the metering dots there show that the computer sees a live, active microphone.
Selecting the Mic in the Sound prefs page does nothing to pass it on to the Logic > Preferences > Devices > Core Audio >Device list of selectable items. This is frustrating, since GarageBand sees the live mic without any problem, but GB is a simpler program that has fewer options while Logic has many other potentials, so a one-size-fits-all solution may not be its best default setting.
To get the mic into Logic, you have to go into the Audio MIDI Setup utility program where a peculiar option appears that is called “Aggregate Device”.
This keyword is not found in the Mac docs, and understanding it seems to be a big secret. Even the Audio MIDI Setup help page will show you how to find it, but not how it works or how to use it for Logic. Ahem.
You open Audio MIDI Setup and under its header bar Audio is only one item, sure enough, Open Aggregate Device Editor. That opens a window that has two sections, an upper window with Aggregate Devices / In / Out across its top, and a lower window that shows all the options that the computer is aware of. The lower window is called “Structure:” and columns show Clock / Use / Audio Device / In / Out / Resample.
A default item “Aggregate Device” shows in the top panel, and you can add others and double click on one to change its name. You can make many variations here.
By default these will be present:
Built-in Line Input
Built-in Digital Input
Built-in Output
Built-in Line Output
Built in Digital Output
At the bottom of this list any other audio input devices that are plugged into the computer should show up. If they can be seen in the System Prefs > Sound > Input page, they’ll be here, too.
When I plug my Blue Snowball USB mic into the computer, it shows up here as Blue Snowball.
You create an Aggregate Device by clicking on your sound source, in my case, the Blue Snowball, then adding one or more other options.
When you click the Use check box for any entry, it pops to the top of the list.
Principle #2: An Aggregate Device is used by Logic to “see” both an audio input and an audio output path at the same time. The Device you’re creating at this point must include an input Audio Device AND at least one Output item to be fully functional for Logic. A Help page in Audio MIDI Devices called “Combining multiple audio devices” explains this in bare bones, but you can’t see that help page unless the Audio MIDI Devices utility is open.
In my case, I’ve checked the Blue Snowball and Built-In Line Output, so I can use that combo in Logic to define where the mic is coming from and where the Logic audio output should go to my line-input amp and speakers.
In the Audio MIDI Setup utility, simply selecting the Blue Snowball as the “Default Input:” device and/or the “Properties For:” options shows that the Audio Output area of the page has this cryptic message: “Output is not supported.”
At this point, you’re almost ready to go, and you can close the Audio MIDI Setup utility. But there is at least one more “gotcha” to conquer.
Principle #3: Logic ONLY looks for its list of usable Core Audio Devices when it starts up. If you have it open right now, all the choices made for Aggregate Device will not show up as selectable. Save any work in Logic, shut it down, then boot it up again.
Now you can use Logic's Preferences > Devices > Core Audio >Device list to see your Aggregate Device. I’ve named mine “Snowy Line Out” to trigger my recognition of what it contains. Another one is called “Snowball + Line + Digital” and it has both line and digital outputs aggregated to the Snowball mic input.
You can make one in the Aggregate Device Editor that combines a microphone plus earphones (Built-in Output) plus Line and/or Digital Outs, too. You'll have to switch among them in Logic as you work, but each will carry the live mic direct to recording.
I hope this gets you through the frustration of not knowing what to do when confronted with the lack of clear docs and complete steps to get a USB mic or other seemingly opaque input issue. Feel free to add to this so others in my former state of bewilderment can gain understandings.
If Steve Jobs were to encounter the level of opacity, ambiguousness and frustration that setting up a simple USB microphone can create in Logic, you can bet that the several programs and their intimate interdependency would be either automated or fully explained in the documentations that followed his fiery analysis of the issue.

I don't know of another way to get the Blue Snowball USB mic to show up in Logic. If you can do it without having to go through the Aggregate Device route, feel free to post here how to get that to happen.
I didn't have a different mic available when I started trying to do what seemed to be the simplest of things -- record and play back an audio track -- and nothing else seemed to work.
There are a lot of Aggregate Device threads around here, many associated with Blue Snowball, Blue Snowflake and other things, but none of them laid out the principles of how Aggregate Device Setup needs to work or what to do to force it into compliance.
As I said, the clues in the Logic docs and in-mac docs are minimalist, at best, none of them bringing instant head slaps of success readily.

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch. All other components work normally. In Activity monitor it says Adobe switchboard failed to respond. Can anyone help solve this issue?

I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch. All other components work normally. In Activity monitor it says Adobe switchboard failed to respond. Can anyone help solve this issue?

Release: 4/25/2012
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx

I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my p

I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my paid plan in two computers?

Hi Susan,
Please refer to the help document to fix this issue:
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
You may also refer to the thread as below:
creative cloud software says my free trial has expired, but I have a paid subscription
Regards,
Sheena

I am having major issues with Logic 8 and want to reinstall.

I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?

What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one.

My toolbar is missing and there is a button where it used to be that says "Please re-install the Toolbar" but when I click on it nothing happens? Also when I start Firefox I get a script running error how do I solve these issues?

My toolbar is missing and there is a button at the top left that asks me to "Please re-install the Toolbar" but when I click on it nothing happens???
Then when I start Mozilla I get a long delay before it launches and a script running error "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: chrome://tavgp/content/libs/include.js:595"
How do I solve these issues???

No idea - and you provide no clues
what version of iPHoto do you have? Of the OS? is the iPhoto icon you are speaking of in the Dock?
re-read your post and try to provide information using standard Mac terms since we can not see you or your computer and only have your worrds to let us try to help you
Somehow my "IPhoto" icon now says "Preview". When I click on "Preview" nothing opens up except the bar says Preview. When I click on the Preview on the bar, a box opens up with different items, except when I click on any of them, there is nothing there. The only thing that work is the "quit preview". However, it is still there where my IPhoto icon should be. I can't get into my IPhoto. How do I get rid of this "Preview" and how did it end up taking over the IPhoto icon???
If you go to your Applications folder and double click on iPhoto what happen?
LN

I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.

I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.

I don't see an issue, but if you mean why didn't you get most of your memory back you need to see what else is using storage. Go to Settings/General/Usage. Wait a bit for it to calculate storage allocation, then when it finishes you can see how much storage each app uses.

TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

uninstall all iTunes,5 programes,this worked for me after reinstall them

Improving timing and solving tempo issues in Logic

Similar Messages

Maybe you are looking for