Imprting from cd, 1st song constantly incomplete

i have been importing my cds to my computer.. it always seems the 1st song on each cd lags when importing.. gives up, says its complete but only has about 30 seconds or so of the song.. the rest of the cd and songs import fine, but this has been a consistent problem.. does anybody know what causes this

From your first post I thought it was just one CD, but if you're saying it happens to many - or all - of them, then either every single one has a got a scratch or finger mark on it (towards the middle of the CD if it's the first track) - or - perhaps more likely, there's something wrong with the CD drive in your computer.
Is there another CD drive on your computer (mine has two)? If so, try using that instead, although you may need to tell iTunes to look for it.
Otherwise, I suggest you try narrowing down the problem, as follows:
If it is always the first track of many CDs, then do check the playing side of the disc for marks (the playing side is the one without the text/picture on it, not everyone knows this). Then, if that doesn't show up any problem, I think it could be time to ask for an opinion on the CD drive itself. Do you have a local computer repair shop nearby? If so, ask them for an opinion and estimate of cost before taking it in.
Personally, I don't think "reloading iTunes" will achieve anything and while moving to your Mac might solve that particular problem, I think it'll cause you many, many more! First of which (and I may be wrong on this), doesn't an iPod configured for Windows not work on a Mac until re-formatted (and the same applies the other way round)?
Phil

Similar Messages

  • Since last sync on iPod Touch 1g, music crashes after playing 1st song.

    Since the last sync on my iPod Touch 1g, both the 3rd party apps and the music app would crash after opening (music after playing 1st song).  I found a fix online for the apps, but how do I get my music to play again?

    I have had a similar hiccups with my 3G ipod touch 64gb after updating it with the new iOS 5.  While syncing in iTunes on my MacBook, the storage bar on the bottom will show that most of the space is taken up with my songs that I want synced from iTunes but when I go to use the iPod touch after ejecting it from the MacBook the songs are listed in a ghost like consistency but the actual files are not there and I can't get any response when I touch the song title or album that I want played.  In fact, when looking at the "About" inquiry screen within the Settings on the ipod touch, it shows that most all of my space is unused.  Where are the phantom files, and why doesn't a synch work as smoothly as before?  Conversely,  my 4G ipod touch works flawlessly, so far, with the new iOS 5. I am afraid that the new iOS 5 isn't ready for prime time when it comes to the 3G ipod touches.  Have any others had a similar problem when it comes to synching music, which used to sync flawlessly without problems, to their 3G ipod touches with the new iOS 5 upgrade?

  • Transferring slideshow w/attached playlist to idvd only 1st song transfers

    I created a slideshow in iphoto version 5.0.4 with an attached playlist created in itunes and exported the slideshow to idvd. However only the 1st song in the playlist plays. the rest of the slideshow is silent. Help!!

    Hi dduffy,
    Only one song exporting with Slideshows
    Right now, this seems to be a know problem/bug. There have been some work-arounds. Don't know if the problem is with iPhoto, Quicktime or a combo of both.
    -From Bob Worthington: re-ripping the cuts I wanted as background music for the DVD as a single cut in iTunes. I then made a playlist containing the one extended cut of music.
    -Old Toad: share to Quicktime from iPhoto and then import the resulting movie into iMovie you can extract and delete the audio from the video and add the two songs to the video and save.
    Quicktime Pro-open the movie and bring up the Movie Properties menu window. In the top window select the audio track and delete it.
    If you want more than one song you'll have to join them together with iMovie or some other application. Then open that joined file with QT Player. Then do a select all and copy. Now go to the QT window of the movie and select the Edit->Add to Movie menu option. You don't want to scale it because it will change the play speed of the audio unless it's time is exactly the same as the movie.
    You could go the other way, open the movie, select all and copy, and then past with scaling to the audio. That will change the speed of the movie and transitions to fit the audio track. In this case the resulting video file will have the name of the audio track file that you started with.
    You may have to play with it a bit to get exactly what you want. Be sure to work with copies of all the media files for the project.
    -Peter Burtwistle: I opened the Qt movie that iPhoto makes when you export to iDVD and removed the sound track.
    Then made a new soundtrack by opening all three songs in QT, then cutting and pasting them together.
    Finally use QT Pro's 'Add to Movie" option to add the soundtrack to the original movie.
    This worked well and was fast to do too.
    -Joe Lombardo: I ended up having to extend the songs by 20 seconds so I brought them all into GarageBand and made some edits. Then I exported them all to iTunes as a single track and used that for the slideshow
    From scotty321 at MacOSXHints.com: If you have Roxio Toast Titanium installed on your machine, you can join unprotected tracks yourself by simulating a disc burn. Simply take these steps:
    Go to the Audio tab in Toast.
    Drag your audio files from iTunes into Toast.
    Reshuffle them in the proper order within Toast.
    Go up to File: Save As Disc Image. Save your disc image somewhere on your Desktop.
    Choose Utilities: Mount Disc Image. The CD will mount on your desktop, and iTunes will think that you just inserted a CD.
    Within iTunes, select the tracks that you want to join and then use Advanced: Join CD Tracks.
    Go through the import process, and you've got a joined track! Simply rename the track to whatever you want to call it, and you're good to go.
    From Lori...
    Burn the playlist in iTunes.
    Make sure you have itunes Prefs just open the Cd and not automatically play or import the songs.
    Insert the burned CD and iTunes will open.
    Within iTunes, select the tracks that you want to join and then use Advanced: Join CD Tracks.
    Go to Advanced>convert selection to AAC.
    When done, make a new playlist named after the slideshow.
    Put the new combined track into the playlist.
    In iPhoto, select this playlist for your slideshow.

  • Cant resume from last played song !!!

    I have Xperia M2 with 4.4.4 update, firmware 18.3.1.B.1.8 and Walkman 8.5.A.3.2.
    I have smart key  1.0.1.17 installed. I have enabled MUSIC mode in smart key to play / Pause on single press.
    When i press headset key one time Walkman starts playing music but every time i pause Walkman for some time
    and press key again. Walkman start playing song from 1st song of playlist.
    Why its not starting / Resume from last played song ?

    I've seen this with music stored either on the SD card or Internal storage but not with integrated spotify. 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • HT201272 Help! i purchased a cd and some of the songs are incomplete, can i redownload & how???

    Help! i purchased a cd and some of the songs are incomplete, can i redownload & how???

    If you are in a country where re-downloading is possible (iTunes in the Cloud and iTunes Match Availability by Country - http://support.apple.com/kb/HT5085), delete the track and download again (Downloading [using iOS or computer] past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519).  See tips on downloading in https://discussions.apple.com/message/19097773
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.
    If you cannot download a second time, contact iTunes Store support staff through the report a problem links in your account history or,
    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

  • When i rip a cd I only get 1min19secs on the 1st song and the rest says not avail.

    when I rip a cd I only get 1min19secs of the 1st song and the rest of the songs sats that its not avail.

    "Message" usually means a text message.  I suspect you mean email messages.  If so, and the email account you use is IMAP, then you can't delete an email on a device but not on the server - that's the way all IMAP services work.  If the account is POP, and if the email service provides this, then there should be a setting in your email settings for that account to NOT delete from the server.
    If you really mean a text message, then how it works is designed by your carrier.

  • I purchased and downloaded an album, and one of the songs downloaded incomplete.  How do I re-download the song?  It shows as "downloaded" in my purchase history

    I purchased and downloaded an album, and one of the songs downloaded incomplete.  How do I re-download the song?  It shows as "downloaded" in my purchase history

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • How do I stop iTunes from automatically importing songs I listen to from my external hard drive into the music library?

    How do I stop iTunes from automatically importing songs I listen to from my external hard drive into the music library?

    Mac OS X: Double-Clicking a File Opens the Wrong Application - http://support.apple.com/kb/TS2291
    -= Changing the application used to open all files of a certain kind (written with reference to OSX 10.4 but may not have changed) =-
    1) In a Finder window highlight a file of the kind you want to change the application to open that kind of file.
    2) While that file is highlighted, select File > Get Info or press command (apple or propeller icon) + i to get a file information window.
    3) In the lower part of the info window there is an "open with" menu with a list of applications.
    4) If your application is already in the box then it is the default application for opening that kind of file and you don't need to do anything more.  Close the get info window.
    5) If the application showing in the menu is not the one with which you wish to open the file then select a new application. If your application does not appear there then select the "other..." and track down the application (usually in the Applications folder at the main level of the computer).
    6) If you wish to change all files of this type to open with this application in future, make sure the "change all" button is selected.
    7) Close the get info window.

  • How can I download music, etc. to my Iphone 5 from my 2 previous Itunes accts.? When I download from one acct. and then try to download the items from my 2nd acct. I am told it will erase the items I downloaded from the 1st account......How can I get all

    I have 2 Itunes accts. from previous Iphones. I now want to put the music, apps, etc onto my new phone from both accounts. When I sync one account to my new phone and try to sync the other items from my 2nd account - it wants to erase all of the items I synced from the 1st account. Please help! ????

    There is no solution other than getting all of your content into a single iTunes library. By design, iPhone syncs or manually manages with one computer/iTunes account at a time.

  • I have paid for itunes match and have now lost all my music of my iphone except what I paid for from itunes, 964 songs gone not at all happy.  Can anyone help

    I have paid for itunes match and have now lost all my music off my iphone except what I paid for from itunes, 964 songs gone into the cloud. Can anyone help please?

    Enabling iTunes Match does not delete music from your computer. Why do you think it is now not in the iTunes library if it was before? If all of your music was in the iTunes library then it is also now in the cloud if iTunes has completed it's scan and all the music meets the match requirements. Enable the iCloud Status column in the iTunes browser by switching to Song view and pulling down View > View Options. Select iCloud Status then close the small window. Sort on the new column. Your music should be listed as "purchased," "matched" and "uploaded." Some tracks may be "ineligible." Post back and let us know.

  • I have tried importing / exporting my playlist from itunes; dragging songs from itunes to my ipod icon in the right corner; nothing is working.  I want to put songs back on my ipod touch version 6.1.5 from itunes version 11.1.3.8; any one have any ideas

    This is very fustrating I have tried a few different things I have seen on-line and nothing is working.  My itunes is version 11.1.3.8 and my ipod touch is ios version 6.1.5.  Since last Christmas I have a playlist called Christmas songs and I would like to move the songs back onto my ipod.  Before I could drag the songs from under the songs list over to the right and a list including my ipod would show.  It still does but when I do it now the songs do not show up in my ipod.  I would appreciate any ideas to get this to work again.

    Verify you have the right boxex checked to sync
    iTunes: Syncing media content to iOS devices and iPod
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
      - Restore to factory settings/new iOS device.            

  • I upgraded from a 1st generation to the 4th generation Time capsule Model A1409.  Since then I am getting interference on my wireless transmitter that sends signals from my Pay TV box to another TV downstairs.  Is it the dual frequency and how do I stop i

    I upgraded from a 1st generation to a 4th generation time capsule (model A4109) and since then my pay TV wireless transmitter has pulsating interference.  This is obviously due to the new dual band  frequency of the TC.  Is there any way I can set it to one band and what will that do?

    Go in and manually set the wireless channel for 2.4ghz or 5ghz (whichever your av sender is).. try different channels.

  • I recently upgraded my OS to Lion 10.7.4.  I also just upgraded from a 1st Generation Time Capsule to a 4th Generation Time Capsule.  I have an Airport Express (Version A1264) that I formerly used to extend my wireless network.  AE no longer works.

    I recently upgraded my OS to Lion 10.7.4.  I also just upgraded from a 1st Generation Time Capsule to a 4th Generation Time Capsule.  I have an Airport Express (Version A1264) that I formerly used to extend my wireless network.  Airport Express no longer connects to my network.  I have downloaded Airport Utility 5.6 to try and configure, but with no luck.

    TC first gen was not simultaneous dual band. So.. it's probably best to factory reset your extreme and then tell it to extend again.

  • Many of my songs are incomplete and will cut out towards the end

    I've had this problem for several years now. I have over 4,000 songs (most of which were purchased through iTunes and the rest imported from CDs). A lot my songs will play for a little while and cut out at the end. Sometimes it's just silence but lately the next song will just start playing. When I go into my iPhone to check it out it still has the album artwork and everything from the previous song.
    I've contacted support several times about this over the years. The first time I was told to connect to my computer and reload all my songs. This seemed to fix many of the songs but then I would notice other songs had the problem. I was then told to redownload all of my purchases and to sync again. Same thing happened. It seemed alright for a while until the same problem occured. The third time I tried to get it fixed I was advised to delete the song from my phone and redownload it through the iTunes app. This seemed to fix each individual song (though its not very practical). But now even that no longer works. I delete the song and redownload it only to find that it still skips to the next song without registering it. It's driving me nuts and, while I can't prove it, I'm pretty sure the problem is growing. I notice songs that played fine a few weeks ago do the same thing. Considering the amount of money I've spent purchasing music it's maddening not being able to listen to a complete song.
    Is there any fix for this? I've found similar posts but no new advice. Any help that anyone can provide would be welcome.
    Some additional info...this happened when I had my iPod touch, my iPhone 4 and now my iPhone 5. My software is up to date.
    Thanks.

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    If you don't see them straight away it may help to restart iTunes. While downloading select the Downloads widget near the top-right (iTunes 11) or in the entry in the left-hand column (older iTunes) and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    tt2

  • I did an update and only only the music purchased from itunes store is there all the cds I burned to it are gone. Tried syncing ipod but it says it will wipe all content. How do I get all my music back. gone from over 6000 songs to 250?

    I did an update and only only the music purchased from itunes store is there all the cds I burned to it are gone. Tried syncing ipod but it says it will wipe all content. How do I get all my music back. gone from over 6000 songs to 250?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

Maybe you are looking for

  • Macbook Pro Booting Unattended

    This has been an odd problem. I am now GMT +3 and have what is now a very consistent problem: my Macbook Pro will Boot without input from me at 3:00 AM (that is 0:00 GMT) every single night IF the power supply is attached. If not attached, it will no

  • Security violation error (error code 2148532330) in Acrobat Pro XI with Windows 8

    I have two certificates, physically residing on the same (Belgian) government issued smart card. One is labeled "Authentication" (Intended usage: sign transaction), and the other is labeled "Signature" (Intended usage: sign document). I have been try

  • Change default language of Ip phone on CUCM 7

    Hello Everybody, I have Publisher Cucm 7.1 installed on my cluster, and i need to change the default-language of all my phone inside my cluster to Portuguese, Someon know , how can i do that? Thx in advance

  • Revert .vi files to labview 6.0 version

    Hi, I was trying to use the newest labview to open old .vi files written in labview 6.0. But I got so many warnings and couldn't get it to work. So I decided to change back to 6.0 version. I made a stupid mistake by saving the .vi files to the origin

  • WebHelp Template Error: cannot resolve macro

    RoboHelp HTML 5.0.2 Build 801 Word 2003 SP3 I have been working fine until this afternoon. I tried to generate webhelp in two different projects. In the output window I see messages through Updating files, and then a message flashes and it goes to do