Imputed Income uses 27 pay periods instead of 26 pay periods

Hi,
We are using Imputed Income to calculate Group Term Life, Imputed income considers 27 pay periods (instead of 26 pay periods) to calculate per pay check amount.
Please let me know if some one have similar issues and solution to overcome the above issue.
Thanks

I think we can change the pay date even though you change the pay date to 12/31/2009, this is like 27 pay dates but only 26 pay periods, the pay date moved from 01/01/2010 to 12/31/2009 is for 1st pay period of 2010, any way I am into same situation we want to have 27 pay periods in 2009 instead of 2010 let me know if you guys figure it out.
Thank you
Edited by: Abdul Majeed on Dec 22, 2008 7:13 PM

Similar Messages

How can I assign a period (instead of B) in Keynote for blank screen so I can use a Logitech R800 presenter? An option in next version?

I have recently bought a Logitech R800 presenter which works very well with Keynote on a MacBook Pro. The start/stop presentation key does not work but that can be easily fixed by assigning F5 to "Start presentation" for Keynote in the keyboard system preferences. The remaining issue is that the blank screen button sends a period (".") which works as a prompt for a blank screen in PowerPoint, but in Keynote it causes the slideshow to end. Keynote uses the letter "B" for blank screen.
How can I assign a period (instead of B) in Keynote for blank screen? Some sort of work around would be very useful as I often use blank screen in my presentations and much prefer Keynote to PowerPoint.
Perhaps it will be an option in next version of Keynote?
Thanks

As far as I know you can not change these keystrokes without changing the Program files. I am sure it is possible there, but I have no idea where to even start to tell you where to find it.
Your best bet it to go to the Keynote Menu>Provide Keynote Feedback and let Apple know you would like the option to change them.

Gross-up, Hypotaxes, Imputed Income....

Hi Experts,
Can someone please help me understand the Gross up concept? I am not very familiar with Imputed income, hypo taxes, and gross up calculations... Can someone please suggest how i can understand this process in US payroll?
Any documentation help or suggestions are welcome...
Thanks a ton.
Ana

If you want to pay an employee 10000 net for a housing allowance for ex. you will set up your WT in PCL 68 with the val. 5.
SAP will take the 10000 and will calculate the gross up using either the agregate method or the supplemental what ever you set up the wt.
So your $10000 net will became $16435 gross ( exampl for IL state) because 6435 will be the taxes that needed to be paid:
25% Federal 16435x25%=
3% IL state 16435x3% (each state has his own supplemental rates)
6.2% SOcial Sec (partial or none if the employee maxed out) 16435x6.2%=
1.45% Medicare 16435x1.45%
The hypotax is a different story. This is actualy a deduction that the company is taking from an employee pay because he doesn't have to pay a real tax due a foreign assignment.
Imputed income is income that gets added to employees taxable wages for non cash benefits like life insurance, LTD premium, etc
I hope this information helps.
Regards,
Chris

Using SAP PI instead of CRM Middleware

Hi experts,
Is it recommend to use SAP PI instead of SAP CRM Middleware.
If yes how can I do that.
I have read in forum requests that it can be implemented by using iDOC instead of BDocs.
I need a technical guideline how data (eg. Business Partner Data) can be tranferred from CRM to other ERP System.
Thank you for help.
Greetings
Mario
Edited by: Mario Bauer on Jun 22, 2010 9:24 AM
Edited by: Mario Bauer on Jun 22, 2010 9:28 AM

Hi!
SAP PI itself is a middleware Product but very roboust and capable enough to integrate any system to any other system, either it is SAP or Non-SAP. And there are two ways to integrate other ERP System to SAP CRM using SAP PI.
1. SAP PI will receive the message from back end ERP system & convert it to the XML format. SAP CRM receives the message using the Middleware XIF adaptor and convert the incoming XML Messages in the BDocs and the BDocs upload the data in the SAP-CRM Data base.
2. SAP PI will receive the message from back end ERP system & convert it to the XML format. SAP CRM receives the message and using the Functional Module convert the data into the BDocs and the BDocs upload the data in the SAPCRM Data base. In thsi situation, you need an expert ABAP Consultant to write the accurate functional Module.
The data inside the SAP_CRM System always transported in the BDocs not in Idocs. It is the BDocs data containers which transport the data from CRM Middleware to CRM Database and CRM Database upto CRM Middleware.

What's the best way to use your iPad instead of textbooks?

What's the best way to use your iPad instead of textbooks? I'm about to start a BSN program and have heard of using your iPad for textbooks instead of buying and carrying around 8 different books. Is there an app for that? Or do you buy or rent the books? What's the best solution?

Or, if you're like me and you want to do a lot of heavy reading, use the iPad because the low contrast on a Kindle is extremely fatiguing.
Seriously, though "screen glare will cause eye strain" is often taken as an article of faith, there's not a lot of good scientific evidence for it. "Eye strain" can be caused by concentrating on any close work for long periods of time. Looking up and focusing on something distant periodically is very helpful. Older CRT screens that flicker also can be aggravting. I'm not denying that some people find reading backlit screens uncomfortable. However, it's not dangerous. And, then, there are other people who find the higher contrast a backlit screen affords to be much less wearying over long periods of time.

Edge 95 MXP always use multisite option instead multiway

Hello, we have a edge 95 mxp were we have configure multiway but when we want to make a conference call always use multisite option instead of multiway. Our deployment scenario is based on the following scenario: Deployment with TelePresence Conductor connected to Unified CM (page38) from the following deployment guide:http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-2/Cisco-TelePresence-Multiway-Deployment-Guide-X8-2-XC2-4.pdf.
The Egde 95 MXP is register on VCS-C, DX650 and CTS500 are register in CUCM.
Our versions are
VCS-C 8.2.1
CUCM 10.5.1.11901-1
Conductor XC3.0.2
vTS: 4.1(1.79)
Edge95 MXP:F9.0 PAL
And below is the config of the Edge95
xconfiguration m
*c xConfiguration MainVideoSource: 1
*c xConfiguration Multipoint Mode: Multiway
*c xConfiguration Multipoint MultiwayURI: "(205)([3-4])(.)@domain(.*)"
*c xConfiguration Multipoint MultiwayMultiprotocol: On
*c xConfiguration Multipoint MultiwayStartupPeriod: 4
*c xConfiguration MaxBandwidth: 6144
Any help we will be useful
Regardd
Anestis

Hi,
Hi Wayne, I change the Multiway URI to be as it is the actual alias in my conference alias template on Conductor
xconfiguration m
*c xConfiguration MainVideoSource: 1
*c xConfiguration Multipoint Mode: Multiway
*c xConfiguration Multipoint MultiwayURI: " [sip:|h323:][email protected]"
*c xConfiguration Multipoint MultiwayMultiprotocol: On
*c xConfiguration Multipoint MultiwayStartupPeriod: 4
*c xConfiguration MaxBandwidth: 6144
But from the Edge 95 I'm in a point-to-point call and I see the following
xstatus call
*s Call 1 (status=Synced, type=Vtlph, protocol=H323, direction=Outgoing, logTag=21):
CallRate: 768
RemoteNumber: "20498"
Mute: Off
Microphone: On
Duration: 318
MuteOutgoing: Off
CallOnHold: False
RemoteSiteOnHold: False
MultiwayProgress: Off
Channels 1 (type=Incoming):
Rate: 768
Restrict: Off
IPLR: On
Encryption (status=Off): /
Audio (status=Active):
Protocol: G722
Rate: 64
Video 1 (status=Active):
Protocol: H264
Resolution: Custom
Rate: 704
Video 2 (status=Inactive): /
Data (status=Inactive): /
Channels 2 (type=Outgoing):
Rate: 768
Restrict: Off
IPLR: Off
Encryption (status=Off): /
Audio (status=Active):
Protocol: G722
Rate: 64
Video 1 (status=Active):
Protocol: H264
Resolution: w448p
Rate: 704
Video 2 (status=Inactive): /
Data (status=Inactive): /
*s/end
*s Call 2 (status=Disconnected, type=NA, protocol=NA, direction=NA, logTag=NA):
Cause: 16
*s/end
*s Call 3 (status=Disconnected, type=NA, protocol=NA, direction=NA, logTag=NA):
Cause: 16
*s/end
*s Call 4 (status=Disconnected, type=NA, protocol=NA, direction=NA, logTag=NA):
Cause: 16
*s/end
*s Call 5 (status=Disconnected, type=NA, protocol=NA, direction=NA, logTag=NA):
Cause: 16
*s/end
*s Call 6 (status=Disconnected, type=NA, protocol=NA, direction=NA, logTag=NA):
Cause: 255
*s/end
*s Call 7 (status=Disconnected, type=NA, protocol=NA, direction=NA, logTag=NA):
Cause: 255
*s/end
OK
Do I have to make any more config on Edge95 because it seems to me that can not go to the multiway for a conference.
Regards
Anestis

I deleted my iphotos app by mistake. i was wondering if there is a way for me to download it for free instead having to pay for it again?

I deleted my iphotos app off my mac by mistake. i was wondering if there is a way for me to download it for free instead having to pay for it off of appstore?

Welcome to Apple Support Communities
iPhoto comes for free with every new Mac, so you don't have to pay.
If your Mac didn't come with DVDs or it came with OS X Lion or Mountain Lion, open the Mac App Store, log in with the Apple ID you used to register the computer, go to Purchases and download iPhoto free of charge.
If your Mac came with DVDs or you bought iLife in a DVD, insert the DVD and reinstall iPhoto. Then, open  > Software Update, and install the most recent version

Control ESS Open Enrollment to use adjustment reason instead of open offer

Hi :
We would like to control open benefit enrollment with adjustment reason instead of standard open offer. Plans are configured for adjustment reason 'OPEN', IT0378 created for the ee with this reason, and open enrollment period is configured . I use
'EMPLOYEE_OPEN_ENROLLMENT_SERVICE05' as my resource.
However, it keeps bringing up plans from standard open offer as versus to plan configured for adjustment reason 'OPEN'. Debugging through, I could see that it passes enrollment type 'O' (for open) instead of 'E' (for event) in 'SELECTED_ENROLL_REASON' to function 'HR_BEN_ESS_RFC_INIT_SELECTION' which in turn would cause it to select plans from standard open period instead of plans configured for 'OPEN' adjustment reason.
What could I do to force ESS to use 'E' instead of 'O' ? I try to avoid having to create an enhancement point for the above fucntion to alter the field.
Thanks.

Double-post - closed

Imputed Income for Dependent Life Insurance

We are trying to configure Imputed Income for Dependent Life Insurance and having issues with the amounts being calculated.
Using the formual proivded by the IRS the imputed income is calculated as follows:
                                              Dependent
Age                                              57
Coverage Amount                        375,000.00
Less IRS Allowance                                   0.00
Taxable Coverage                        375,000.00
Divided by 1000                               375.00
IRS table factor                                   0.43
Imputed Income                               161.25
Less amt paid w/h post tax                        (124.13)
Adjusted Imputed Income per IRS calc           37.12
SAP calculates the folliwng amounts though. One question is our uncertainty as to which of theswe two WT's is the inouted income.
Imputed Income From SAP                              57.67 /bd1
Imputed Income From SAP                              18.74 /bt2
Any suggestions where to look to get this resolved?

Hello Brent,
I believe that you are talking about wagetype /BT1.
/BD1 - EE Dep. GTLI Cost
This wage type represents the group term life insurance premium costs for an employee's dependent.
/BD2 - EE Dep. GTLI Coverage
This wage type represents the group term life insurance coverage amount for an employee's dependent.
/BT1 - This wage type represents a group term life insurance premium
(employee's dependent) amount which is taxable.
Regards,
Manny

Use new iPhone with existing EE pay monthly contract

I am 14 months into an EE pay monthly contract with an HTC One M8. If I buy an unlocked iPhone 6 direct from Apple, can I use it with my existing EE pay monthly SIM instead of the HTC?

You can use any device you wish, enjoy the iPhone

How do I use openjpa2.0 instead of openjpa1.0

I use openjpa1.0 provider in weblogic10.3.4 before.
now I want use openjpa2.0 instead of openjpa1.0.
I according to this article (http://wiki.eclipse.org/EclipseLink/Development/JPA_2.0/weblogic#Problem_2:_JPA_2.0_persistence.xml_XSD_Enablement) to enable jpa2.0 .
but failed. it throws exception:
what do i do: seems an odd quirk of the EJB spec. The exception is:java.lang.AbstractMethodError: org.apache.openjpa.persistence.EntityManagerImpl.getMetamodel()Ljavax/persistence/metamodel/Metamodel;
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:111)
I try to delete openjpa1.0 jar file from modules directory.
the servier throws java.lang.NoClassDefFoundError org/apache/openjpa/conf/OpenJPAVersion
it seems the weblogic can't load the openjpa2.0 jar.
can somebody help me?

Hi,
My page quoted above is mostly for older versions of WebLogic 10.3.3.0 and below that could not handle container managed JPA 2.0 injection. For WebLogic 10.3.5.0 and 10.3.4.0 JPA 2.0 is fully functional but will need to be enabled (the best way is to install OEPE, create a server profile to your WebLogic 10.3.4/10.3.4 instance - and select the "Java Persistence 2.0 - Install" link on the dialog in the Eclipse IDE). However, Kodo (based on OpenJPA) is not actively developed. I would switch to EclipseLink which is the Java EE 6 reference implementation. You can do this by changing the default persistence provider in the console from Kodo to TopLink (wraps EclipseLink) or specifying the provider in your persistence.xml.
The link you quote is the section for WebLogic 10.3.3.0
What you need is the new section I wrote in Jan 2011 for the 10.3.4.0
http://wiki.eclipse.org/EclipseLink/Development/JPA_2.0/weblogic#20110115:_JPA_2.0_using_EclipseLink_on_WebLogic_10.3.4.0
See my tutorials for details - where you can also see the source.
http://wiki.eclipse.org/EclipseLink/Examples/JPA/WebLogic_Web_Tutorial
http://wiki.eclipse.org/EclipseLink/Examples/Distributed
thank you
Michael O'Brien
http://www.eclipselink.org

How to maintain Ztable using function module instead of SM30

Hi Friends,
please tell me , How to maintain Ztable or view using function module instead of SM30.
Thanks,
Veerendra.

Hi,
You can design your report and use Function module VIEW_MAINTENANCE_CALL for that.
You need to use Action type as 'S' for displaying and 'U' for maintaining the table.
Ex:
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
    ACTION                               = 'S'
    VIEW_NAME                            = 'Table Name'
EXCEPTIONS
   CLIENT_REFERENCE                     = 1
   FOREIGN_LOCK                         = 2
   INVALID_ACTION                       = 3
   NO_CLIENTINDEPENDENT_AUTH            = 4
   NO_DATABASE_FUNCTION                 = 5
   NO_EDITOR_FUNCTION                   = 6
   NO_SHOW_AUTH                         = 7
   NO_TVDIR_ENTRY                       = 8
   NO_UPD_AUTH                          = 9
   ONLY_SHOW_ALLOWED                    = 10
   SYSTEM_FAILURE                       = 11
   UNKNOWN_FIELD_IN_DBA_SELLIST         = 12
   VIEW_NOT_FOUND                       = 13
   OTHERS                               = 14.
Hope this helps.
Message was edited by: Imtiaz Ahmed

Recently no matter what I do, Firefox will not allow me to use Adobe Reader instead of it's own

I used to be able to display pdf documents using Adobe Reader instead of Firefox's built in. I have tried everything that you suggest and that Adobe suggest. I have uninstalled and reinstalled Firefox. I have uninstalled and reinstalled Adobe Reader (11.0.09). I have gone to the options in Mozilla but when I try to change the Portable Document settings, I don't get the option for "Use Adobe Acrobat (in Firefox)". I do get the for Adobe Forms, but not for PDF documents. If I change it to use Adobe Reader, it downloads and then opens reader which is not I want. I want to use the plugin which is installed (I go to Add-ons and it is installed and "always activate").
Help? This only started happening in the last month or so. I am running latest released Firefox (33.0.2), Windows 7 (up to date with all updates, etc.).

That doesn't solve the problem. I have all those defaults. But in Firefox, it won't let me select for "Portable Document Format" to "Use Adobe Acrobat (in Firefox)" which it used to let me and which is what the Mozilla Firefox help stuff says to do. I can select Adobe Reader but then it downloads it and opens it in a separate reader window rather than using the plugin. If I select to let Firefox "Preview in Firefox", then the Firefox built-in PDF reader will display it. I have added an add-on "pdfViewerSwitcher" which then lets me display in the Adobe Reader plug-in but only after first displaying it in the Firefox preview. So that verifies that the Adobe Reader plug-in works. But I can't set it to always use the Adobe Reader plug-in.
I have some reasons for wanting to use the Adobe Reader plug-in. I use Nuance Power PDF Pro for editing and doing other things with pdfs.
This all used to work and stopped working at some point in the last couple months. And if you search the web, you will find I am not the only one with this complaint.
I don't know whether it is Adobe's fault or Mozilla's fault but at least one of them is broken. And I think it is Firefox since it won't even let me select it but does let me select it for Adobe Forms.

How can I use an American credit card to pay for a membership from outside the US?

How can I use an American credit card to pay for a membership from outside the US? My payment page is set up for Japanese credit cards. I can't change to the US store, because the "Select a Store" page just jumps to the "Products" page.
Has anyone else had this problem? Any help would be much appreciated!

Hi Batt5721,
Welcome to Adobe Forums.
The address and the country on the Credit Card should match the billing address then only payment would be possible.
Thanks
Garima

Why can't I use my new IPad to pay in stores with apple pay?

I want to know why it is not possible to use your ipad mini 3 or ipad air 2 to pay with apple pay in stores. Why can you only use apple pay online with ipads and with iphones you can use them for in store purchases and online purchases. I mean I guess how it makes sense to apple, sense most people wouldn't want to bring there ipad a long with them to pay, but for some people, especially if you have the latest ipad mini which is like a phablet anyways, I feel like it would be nice if you could use it to pay in store with apple pay.

We have no clue as to what Apple may come up with in future models, but for now the snazzy tap&go allure of ApplePay can only be done using an iPhone 6 or 6plus.
Purportedly the rest of the devices can do thru-the-web Apple Pay-ment, but that's not as sexy and not as widespread.

Imputed Income uses 27 pay periods instead of 26 pay periods

Similar Messages

Maybe you are looking for