[iMS 5.2] Two iMS against one DS, where will new user's mailbox be created

I have two iMS 5.2 configured against one DS, iMS A is the production server, iMS B is on a different host and shall become the production server.
I installed B against a temporary DS and switched to the production DS using the local.ugldap stuff. I am not using Delegated Admin.
I use a test domain whose preferredmailhost attribute of the domain's DC tree entry is set to iMS B. But when I create a new user using Console/Admin Server of iMS B (and mailhost attribute set to B) his mailbox turns up on iMS A (checking with mboxutil).
What do I miss here?

I think you need to open a tech support ticket to pursue this.
I have done exactly what you describe, on every version from 4.15 through 6.1, and found it to work differently from what you describe.
All of Messaging Server looks at the "mailhost" attribute in LDAP for mail routing and mailbox creation.
If a message is found coming into a box, the MTA looks up the LDAP entry, and if "mailhost" is on another box, the message is routed there. Since no mail can be handed to the delivery subsystem, no mailbox is ever created, unless you do something manually to create it. Even if you create such a mailbox, no mail should ever be put there, unless you use something like the "deliver" command.
If you attempt to log into the wrong mailhost with webmail, webmail will automatically "proxy" you to the correct box. Is this what you're seeing?

Similar Messages

User can not add more then two products against one order

Hi frnd,
My requirement is in CRM while creating order using CRMD_ORDER transaction. The user can not be entered more then two products against one order.
I am using CRMD_ORDERADM_I_BADI badi to give error I am unable to use this badi. Is there any other options are there.
Please do need full help.
Regards,
Ashish.

Hi Amit,
DATA: gt_header TYPE crmd_orderadm_h. "OCCURS 0 WITH HEADER LINE.
data: ET_PRODUCT_I     TYPE     CRMT_PRODUCT_I_WRKT.
data: gs_PRODUCT_I     TYPE     CRMT_PRODUCT_I_WRKT.
DATA : gt_header_guid     TYPE     crmt_object_guid_tab.
DATA : gs_header_guid     TYPE     crmt_object_guid.
gs_header_guid = IV_HEADER.
*INSERT gs_header_guid INTO TABLE IV_HEADER.
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      it_header_guid       = gt_header_guid[]
    IMPORTING
      ET_PRODUCT_I         =   ET_PRODUCT_I[]
    EXCEPTIONS
      document_not_found   = 1
      error_occurred       = 2
      document_locked      = 3
      no_change_authority = 4
      no_display_authority = 5
      no_change_allowed    = 6
      OTHERS               = 7.
endmethod.
I am using ds code. Its working fine records are coming in Product. But how i will save product into one
itab.
Regards,
Ashish S

Two Apple IDs, one iCloud ID, will it work?

Two Apple IDs, one iCloud ID, will it work?
In my house we have two iPhones and one Mac. My husband and I have two separate Mac accounts, separate iTunes accounts and one common Mobile Me account we use to synch Calendar and Address book between our Mac and our devices. In our separate iTunes libraries we have separate songs, podcast settings, and separate apps. We use one common iPhoto library for our two Mac accounts (which we keep on an external volume with Permissions disabled, to avoid file privilege issues in iPhoto.
It's all working well with MobileMe, but I'm concerned iCloud will make a big mess.
We want common calendar.
We want common address book.
We want separate Apps (no room for us both to have all apps).
We want some shared reminders (like shopping list) but some separate ones (like work tasks). I understand there is a bug about this, but I don't know the resolution (https://bugreport.apple.com/cgi-bin/WebObjects/RadarWeb.woa/4/wo/lHQWT8NZajvGPvP 7ObMPj0/8.66)
We don't care much about common PhotoStream (as long as it works for one of us).
How can we make this all work, when we move to iCloud?
How do we control what synchs and what does not synch?
Has anyone done this kind of complex setup before?
Thanks,
Peter

I have this same issue and have since day one. I cannot seem to figure out how to get into icloud.

Two Heirarchy against one document type

I have requirement to run two parallel hierarchy against one document i.e. Purchase Requisition is document type and 1st hierarchy is PR APPROVAL and 2nd is OGP APPROVAL...
Is it possible, if yes than how?
Thanks and Rgrds,
Rizwan

Hi,
Look for AME option.. I think through AME you can handle Parallel approval.
/ S.P DASH

I have Two apple ids: one apple id will not authorize on same computer.

I just purchased a new imac. I have two apple ids. Stupid, I know.
I was able to authorize one of the apple ids on my iMac. When I try to authorize the other apple id, I get the message "We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later." I keep getting this message day after day.
Also, when I hook up my new iphone 5S to my computer I also get this message "This computer is no longer authorized for apps that are installed on the iphone. Would you like to authorize this computer for items purchased from the iTunes store? If you do not authorize this computer, 22 apps, including "Airport", and their data will be deleted from this iphone." I get the choices: cancel, Don't Authorize, or Authorize. So, I click Authorize, I put in my apple ID and password and get the message "We cold not complete your itunes store request. The itunes store is temporarily unavailable. Please try again later." This is when I try to sign in with my apple ID that I can not seem to authorize.
I deauthorized both apple ids from my old imac.
Any help would be appreciated!

Hi St3vish,
Welcome to the Support Communities!
Our Apple ID Account Security Team may be able to help you with this:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
I hope this information helps ....
- Judy

I have two itunes accounts one old and a new one. I want to merge the songs from the old account to the new one. How is that accomplished?

I have have two itunes accounts. I want to merge the two accounts. How is that accomplished?

You cannot merge accounts.
Sorry

Hi every one i am a new user of macbook pro i deleted my iPhoto from my mac, i don,t have any copy of it in the dvd or usb file, please tell me how can i reinstall iPhoto on my mac. thanks

please tell me have can i reinstall iphoto on my mac. i don,t have any copy in the dvd or usb. i have deleted it from my mac.

Did you go to the App Store, log in with your Apple ID and password and then click on the Purchases button?
What system came preinstalled on your Mac. Did you Mac come with any disks? If so what are their titles?
OT

Installing two iMS against one iDS

Hello,
I need to install two iMS 5.2 against one iDS 5.0 sp2 on solaris. My question is wether there is anything that could go wrong with the installation of the second one and wether there are any steps that should be taken before proceeding. Is there anything that should be deleted from the iDS? Will the installation process abort when the systemgroups or systemusers are already present in the directory? (Or is it ldapadd -c?). I couldn't find anything on this scenario (which doesn't mean that there isn't anything but that I couldn't find it), so a hint where to look for documentation is appreciated.
In short, are there any settings from the first installation, that should be edited/deleted before proceeding to the installation of the second machine? In cn=config/o=internet/o=NetscapeRoot ?
Thanks for your help
Joerg

I didn't have much luck when I was doing the Messaging 5.1 installs, I'm not sure about 5.2 if the problems I experienced would be fixed or not. I tried the 5.1 installer against an external Directory server and after the second install it ended up breaking the ACI's on the User tree making it pretty much unusable until I could re-apply the ACI's that existed on the Directory before I tried the install. It almost appears that the installer in 5.1 wasn't intelligent enough to detect the existence of the attributes,ACI's that it was trying to write into the Directory ... not good. As I mentioned though I don't know if 5.2 is any better. With my setup the local Directories only keep the local configuration information and the Address Book entries. All my User and Group information is kept on the external Directory server. My only suggestion is try it against a non-production Directory server and keep a LDIF backup handy for quick restores.

Need to compare values in two columns of one table against values in two columns in another table

Hi, as the title reads, I'm looking for an approach that will allow me to compare values in two columns of one table against values in two columns in another table.
Say, for instance, here are my tables:
Table1:
Server,Login
ABCDEF,JOHN
ABCDEF,JANE
FEDCBA,SEAN
FEDCBA,SHAWN
Table2:
Server,Login
ABCDEF,JOHN
ABCDEF,JANE
FEDCBA,SHAWN
In comparing the two tables, I'd like my query to report the rows in table1 NOT found in table2. In this case, it'll be the 3rd row of table one:
Server,Login
FEDCBA,SEAN
Thanks.

create table Table1([Server] varchar(50), Login varchar(50))
Insert into Table1 values ('ABCDEF','JOHN'),('ABCDEF','JANE'),('FEDCBA','SEAN'),('FEDCBA','SHAWN')
create table Table2([Server] varchar(50), Login varchar(50))
Insert into Table2 values ('ABCDEF','JOHN'),('ABCDEF','JANE'), ('FEDCBA','SHAWN')
select [Server] ,Login from Table1
Except
select [Server] ,Login from Table2
select [Server] ,Login from Table1 t1
where not exists(Select 1 from Table2 where t1.[Server] = t1.[Server] AND Login=t1.Login)
drop table Table1,Table2

TWO INVOICE CREATED AGAINST ONE DELIVERY T-CODE VF01

Hi,
I got strange scenario that against one delivery containing multiple line items two different invoice created during normal sales process , First invoice with some line item and another invoice contains rest of the item.
Both the invoices is of same billing type.
We want one invoice against the delivery.
Help to resolve the problem
Thanks in advance for your valuable time and effort
Regards
Praveen

Hello,
please run VF03 to display one billing document, then by menu Environment > Split analysis it is possible to see the cause of the split.
Best regards,
Ivano.

In the report level user wants two persons against each work center.

Hi Experts,
Please let me know the solution, I have provided scenario below.
check the query which the user is referring to report:
Example
Work center     Person
KNE33102     44003850
According to the user, the names for the Work centers should be as follows:
Work center          Person
KNE33102         44003850,
KNE33102        44003603
I have check the data in T-code-CR03, each work center getting two persons, as can be shown below.
Work center        Person
KNE33102           44003850,
KNE33102           44003603
In RSA3 it can be seen that both the records are being extracted
Work center     Start date     End date     Person
KNE33102     09.02.2009     31.12.2009     44003850
KNE33102     09.02.2009     31.12.2009     44003603
In BI , when checking in PSA, it can be seen that the data is also being loaded to BI (Two persons loaded against Work center-KNE33102)
Work center     Start date     End date     Person
KNE33102     09.02.2009     31.12.2009     44003850
KNE33102     09.02.2009     31.12.2009     44003603
But when loading to the Info Object, one person has deleted. Because of this, in the report level displaying one person.
Note:-Please let me know what is the procedure, in the report level user wants two persons against each work center.

Hi,
As you said in your post the data has mentioned up to 2009. can you try execute the query till to date .
Regards
sivaraju

Two billing for one sales order for same customer

Dear All ,
I have a requirement of posting a two billings for one sales order.
One is for Sales and another is for commission...
Entry could be
Sales Entry - Db Customer
Cr Sales
Commission entry could be
Db - Cusomter
Cr- Sales commission income account (P/L)
We are having third party sales scenario , In this case billing is MIRO dependent.
Once the miro is done then only billing is possible ...
Could you please advise on that ..
Regards,
Sukh

Dear Ratish,
Thanks for yr reply.
I already did that but it is not serving business purpose.
Comm payment - comes diff time than sales payment.
so ,I will post one entry customer will get hit with total amount Sales + commission
like below
Let say 10, 000 is the sales value and 500 is the commission
So , This entry will get posted
Customer Db- 10,500
Sales Cr- 10,000
Comm Income Cr- 500
But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
So, We wont be knowing for which case we have or havnet received the payment against commission.
As , Customer account is got hit with total amount( Sales+ Comm..value).
Pls advise how to solve this.
Regards,
Sukh

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

Actually, everyone missed one point, when a device is priced, the cost of icloud storage space for that device is also included in it that is why they are able to give you 5gb each for each user ID, in nutshell there is nothing free coming with apple device purchase, it is paid for. What they are trying by giving only 5gb per user ID irrespective of the number of devices used is pure broadlight looting, they take money from you when you buy each device and give you nothing, This is a case of goods and services bought but not fully deliverd ie apple can be suied for discreminatory treatment towards it's users. I wonder why no one tried this yet in America where everyone sue everyone for petty things..... there is no one to take up this issue? . if tim got any love for the guys who shell out money for the devices his company makes, he should be implimenting this as priority before someone wake up from sleep and sue him.

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

How to configurate system for two database under one server

Hi Friends,
I installed abd created A database by oracle 10GR4 in window 32 bit 2003.
it works.
Then i created other B database by DBCA under this server.
When I shutdown immediate database.
it works well. But I can not startup mount ot startup A database again,
I got below message as
SQL> startup mount;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> startup;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> startup;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
From EM, I saw as
A listen Status Up
LISTENER
Oracle Home
C:\oracle\product\10.2.0\db_1\BIN
Location
C:\oracle\product\10.2.0\db_1\BIN\network\admin
BUT agent connect Status
Failed
Details          ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
A database instance down
Host     salerpt.net
Port 1521
SID SALERPT
Oracle Home C:\oracle\product\10.2.0\db_1\BIN
Also I try to connect as
SQL> connect sys/salel@salerpt as sysdba;
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Form EM, I saw listen start up.
Then I stop it. then restart it
I can saw B db listen and can not see A db listen.
also
I saw that other B database works.
My listen info as***************
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1\BIN)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = SALERPT.NET)(PORT = 1521))
I check physical, two database use one common bin directory .
I do not have any experience to handle two database under one oracle server.
How to check and configurate DB server system?
Thanks for help.
Edited by: user589812 on Jan 4, 2009 8:17 AM

Jim,
Before starting the database A, did you set ORACLE_SID=A from command line? You can run as many instances you want from single server provided you enough memory, processing power. Also try starting your instances usign window services and check and post some lines from alert.log for database A.
tnsnames.ora entry
DATABASE_A =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = salesrpt.net)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = DATABASE_A)
DATABASE_B =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = salesrpt.net)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = DATABASE_B)
)Regards
Edited by: OrionNet on Jan 5, 2009 10:55 AM

[iMS 5.2] Two iMS against one DS, where will new user's mailbox be created

Similar Messages

Maybe you are looking for