In 10.4, an internet audio file now opens with Quicktime?

Many thanks in advance for your attention.
When I was using 10.3 (and before), when clicking on an audio file on the internet, RealPlayer 9 automatically opened.
One could see the % of the file being downloaded and then (quickly), one would automatically hear the audio clip.
Most often, I am talking about audio clips available on NPR (National Public Radio).
Since I have installed 10.4 (now at 10.4.3), when I click on the same audio file, now Quicktime opens instead. And then nothing happens. Quicktime opens, a Quicktime Player is seen, but I hear nothing and nothing tells me whether the audio file is being downloaded, is ready to be listened to, or anything.
With Quicktime 7, is RealPlayer now supposedly superfluous?
- Ross

Many thanks QuickTimeKirk,
But think I need more step-by-step directions.
1. I have RealPlayer (9) already.
2. MIME settings in QuickTime Preference Pane. Set it to use RealPlayer for the Format .SMIL How?
3. In the QuickTime Preference Pane, there is a box for .SMIL, one box only, under "Miscellaneous." It IS unchecked already. But NPR still opens with QuickTime.
4. By "Change your Mac to use Real Player to open .SMIL files - ." I assume you mean, I will be on NPR, download a QT file and then try to change it to a RealPlayer file under "Get Info?"
- Ross

Similar Messages

  • How do i tell the finder to open all of my .m4v files to open with quicktim

    How do i tell the finder to open all of my .m4v files to open with quicktime, not itunes. i tryed right clicking on it and choosing other and selecting quicktime then checking the box that says "always open with" but that only pertains to that one file not all of them.

    Right click and choose "get info" then choose quicktime from the "open with" drop down menu.
    Then below that you will see "Change all" click that and your done.
    Randy

  • Audio file as hyperlink with QuickTime export

    I am trying to export my presentation as QT .mov file in which the movie plays without the user having to manually advance each slide. Seems like it should be simple (it is in PP) but I’m stumped.
    The presentation is simple slides with no builds or transitions.
    On to each slide I dragged a small .aif file of me speaking for a few seconds.
    What I want is a QT movie that advances to the next slide when the audio is completed.
    What I am getting is a movie in which the user has to click at the end of each audio to advance to the next slide.
    My setting under the document inspector is Presentation: normal
    The four options under the QT export menu include Manual Advance (which I don’t want), Hyperlinks, Recorded Timing (does not work for a separate file on each slide), or Fixed Timing (but each audio differs in length).
    I tried making each sound a hyperlink (link to next slide) but that does not work either. The resulting movie still does not advance at the end of the audio.
    Any suggestions appreciated.
    Alan

    Many thanks QuickTimeKirk,
    But think I need more step-by-step directions.
    1. I have RealPlayer (9) already.
    2. MIME settings in QuickTime Preference Pane. Set it to use RealPlayer for the Format .SMIL How?
    3. In the QuickTime Preference Pane, there is a box for .SMIL, one box only, under "Miscellaneous." It IS unchecked already. But NPR still opens with QuickTime.
    4. By "Change your Mac to use Real Player to open .SMIL files - ." I assume you mean, I will be on NPR, download a QT file and then try to change it to a RealPlayer file under "Get Info?"
    - Ross

  • .wmv files now open with premier

    Hi:
    I have CS2. Just in the last week, any .wmv file that I download now wants to open with Premier! Of course, I have to start a new project and when I do, there isn;'t any file to open. I have looked in the download manager and it is downloaded, ready to play, but premier can't import it. Media Player can't find it either. I have unchecked the file types with MP and then re linked them, no luck. I think MS did an update, but I haven't changed any file associations with premier or QT or any other player. Anyone else having this problem or heard of it? I have looked online and can't find anything relating to this. it is very frustrating not to be able to look at amy .wmv files. TIA

    You need to change the file association for.wmv.
    Explorer Window>Folder options>file types - edit

  • Some .avi files dont open with QuickTime or MPlayer. Please help!

    Hi! I have few .avi files which are not played by QuickTime and when I open them with MPlayer OS X 2, the sound is on but the video doesnt come up. Please help!

    Hi Niel, Installed both.  Both play the sound but NO video.. When opened in MPEG Streamclip no messages appeared so, there was nothing to accept.  Appreciate your reply but if you know any other way of working this out please help.  Many thanks Niel!

  • I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

    I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

    P.S. Site is http://www.coldwatercreek.com

  • IPod audio files now listed as "other files"

    my iPod was connected to my work pc when iTunes froze.  I was not able to eject the iPod so I manually disconnected it. Since then, the audio files now show on the iPod as "other" files--thus, it doesn't play music--and the iPod will not synch with either my work pc or either of my Macbooks. I have 30K+ songs on the iPod so I'm hoping the problem is correctable.  Thanks everyone,
    Ed

    Your iPod's library has been corrupted. The music is probably all still there, but the iPod has no database through which to access it. Check out this post from Zevoneer for some iPod media recovery options.
    http://discussions.apple.com/thread.jspa?messageID=6273675&#6273675
    Many of the tools will rely on a valid library, but the manual method refered to towards the end of the post should work regardless.
    tt2

  • I HAVE COMPLETED SEVERAL IMOVIES AND FINALIZED JUST FINE.  NOW I GET THE FOLLOWING MESSAGE FROM MY LATEST PROJECT.  "The project could not be prepared for publishing because an error occurred.  (File already open with write permission)"!  What is going on

    I HAVE COMPLETED SEVERAL IMOVIES AND FINALIZED JUST FINE.  NOW I GET THE FOLLOWING MESSAGE FROM MY LATEST PROJECT.  "The project could not be prepared for publishing because an error occurred.  (File already open with write permission)"!  What is going on?

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    Easiest way to find out if this is the problem is by:
    • Create a new User-Account
    • Log out of Your old one and into this
    • Re-try iMovie
    If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occurs only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    Yours Bengt W

  • When I open a file it normally opens in 12.5% stated on the header. For some reason, it now opens with 100+% on the header and is much smaller in size. How do I go back to the first option I noted? I use AP to work on blueprints for measuring so the accur

    When I open a file it normally opens in 12.5% stated on the header. For some reason, it now opens with 100+% on the header and is much smaller in size. How do I go back to the first option I noted? I use AP to work on blueprints for measuring so the accuracy matters. Any direction would be greatly appreciated. Thank you.

    Are the image all the same size the % files open into a document seems to vary with the number of pixels the image being opened has.  Check the Image size.

  • For ICD-BX132, How do I transfer an audio file to PC with high quality ?

    when i transfer audio files from the recorder to pc .I find it transferd in poor quality. i need it in HQ quality.

    If you are trying to play back MP3 files that have been transferred from the Integrated Chip (IC) recorder to the computer, if the audio skips, pauses or freezes during playback and if you are using third-party software, the software may not be compatible with the MP3 files. Try the following troubleshooting steps:
    Try playing the MP3 audio files back on the IC recorder instead of the computer.
    If the audio still skips, there may be an incorrect setting on the IC recorder. Refer to the operating instructions supplied with the product. Manuals are available online through the Manuals/Specs/Warrantylink on this page.
    If the audio files play back with no issues on the IC recorder, then the IC recorder is not the problem and continue with the next troubleshooting step.
    If you are using third-party software to play back the audio files, try using a different type, or brand, of third-party software that is compatible with MP3 files that are recorded in a universal format.
    If the audio files play back with no issues using a different third-party software, then the problem was with your other third-party software.
    If the problem persists once you have tried other third-party software, then the software is not the problem and continue with the next troubleshooting step.
    Try using a different computer to play back the audio files.
    If you complete all of the steps and the issue is not resolved, service may be required or you can get in touch with Sony Egypt Support here for further assistance. 
    If my post answers your question, please mark it as "Accept as Solution"

  • I'm trying to share to Media Browser a 20 minute still slide show with music and text. I have tried several times to save at 1080 HD, but just before it's finished, a message box pops up saying "File already open with write permission."  What's this mean?

    I'm trying to finalize/share to Media Browser a 20 minute still slide show with music and text. I'd like to finalize it 1080 hd and have tried several times, but just before it's finished, a message box pops up saying it can't be done because "File already open with with write permission."  What does this mean?  All files are closed; this iMovie project is the only thing open.  Does it mean one of the song files from iTunes? And should I just settle for saving it as a "large" file, which is what I'm trying right now?
    Thanks,
    Jamie

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    See also this post
    https://discussions.apple.com/thread/4434104?tstart=0
    Yours Bengt W

  • Why am I getting this message suddenly, when I've done dozens and dozens of projects without trouble at all: The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission)

    Why am I suddenly getting this message after I've been using iMovie for a few years now and have never had any such issue before:  The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission)

    Two things
    I meant search THIS FORUM
    Error minus49 not same as ERROR 49
    Yours Bengt W

  • Why am I getting the message "project could not be prepared because an error occurred. (File already open with write permission)" when trying to share my imovie to media browser?

    Why am I getting the message "Project could not be prepared because an error occurred. (File already open with write permission.) when trying to
    share to the media browser?   I have done this many times before and never got this message.  This is very frustrating.  Can anyone help me?

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    Easiest way to find out if this is the problem is by:
    • Create a new User-Account
    • Log out of Your old one and into this
    • Re-try iMovie
    If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occurs only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    Yours Bengt W

  • Youtube videos only open with quicktime--small screen/no audio. Flash works with Safari, not Firefox.

    I've updated flash, reset Firefox, restarted Mac. Youtube videos will not load with Flash. They open with Quicktime in a 1x2 inch box of low res images with no audio.

    Open up your preferences/Options and open up applications. From here check the preferences for youtube files. In about:permissions you can check the preferences for youtube.com as well.

  • Files get open with single click sometimes

    I recently started having this problem. When I browse through different image/video files, some of the files get open with one click only. This is really very annoying. I am event thinking to migrate back to Windows because of this problem.
    How to reproduce the issue:
    -> Open a folder that contains many images/video files
    -> Click on anyone of them to select it
    -> Now click outside the window. So, the finder goes out of the focus (but should stay visible)
    -> Now, inside finder click any other image/video just once, it will open up automatically with just single click

    If you have access to a mouse, try using it. If everything is okay using the mouse, then it is likely trackpad related. Other troubleshooting.
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode.  Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    General information.
    Isolating issues in Mac OS X
    Troubleshooting Permission Issues
    Step by Step to Fix Your Mac

Maybe you are looking for

  • Can I have more than one iphone per email account?

    When my son got his iphone 4s I used my email address since he didnt have one yet.  I have since gotten an Iphone 4s also, but when I went to activate it I had to put it under another email account, since mine was used for my sons iphone, so I used m

  • Final Cut Pro 5 quit working. Please help!

    I have Final Cut Pro 5, which worked two weeks ago when I opened it. Last Monday (4/27) I ran a system update. Yesterday when I tried to open FCP5 the startup screen popped up like usual then disappeared (along with the black triangle under the icon

  • 26C100U LCD tv no sound or picture

    This TV died yesterday. 2 yrs old. green light comes on but no sound or picture. Other functions do not work either. Unplugged over night still nothing. took back cover off and circuit boards look normal. Fuse is good. Capacitor looks ok. Any ideas?

  • Can you shuffle photos that are in iMovie

    I am making a movie with a lot of animal pictures. There are sections where it gets a little boring because there are series of pictures of animals. Like there will be five or six of an elephant then five or six of a lion. So instead of going back ma

  • Some of my photos show small when I double click them

    I have a macbook air OS X 10.9.5 (13F34), iPhoto 9.5.1 I have just noticed an issue in my photos from 2008 to 2009.  When I double click on the photos in this period small size photos come up, not full screen at the start of the problem I note that o