In 3.2, adjustments don't appear when moving back to library module from develop module.

I just upgraded to 3.2. When I make a series of adjustments in the develop module, the adjustments do not carry over to the library module. This did not happen with 3.0. In 3.0, the most recent adjustment made would be how the image would appear in the library module. Now, only the original import, without adjustments, appears in the library module. Even if I make a snapshop to the image, the adjustments do not seem to carry over back to the library module. When I go back to the develop module, all of the adjustments are still there, but what is initially seen is the image as it had originally been imported. I shoot in RAW (NEF for Nikon), and have a MAC 10.6.4. Never had this problem before the upgrade. Help.

I will try these two suggestions, bur first two questions: Are you suggesting that I select the image in the library and then zoom in and out, or are you suggesting that I zoom in and out while the image is still in the develop module after I have made a series of adjustments to the image? Perhaps I am ignorant, but I am not sure what you mean by making a preview image. All of the images when imported into light room are standard previews. Thanks for your help.

Similar Messages

Images don't appear when moving an album into a new project

I've been scanning negatives into Aperture using a project (Scans) as a "holding" point until I determine which actual project to move the images to. I put these scanned images into various albums within Scans. When I've decided what actual project to move them to, I drag the album to that project, then drag the images themselves (or vice versa). A lot of times, the images will move to that project but won't show up in the album I just dragged unless I quit and restart Aperture. I never had this problem before upgrading to v.3.
I've also had a flicker problem when comparing a version to its master (posted elsewhere in the forum).

Well not really, Aperture holds all your image files in Projects. If you can think of a project as a box of negatives it will help you. Then put your prints in Albums, so to speak. You can put the Albums any place you wish, but the negatives stay in the project box. Allan.

Texts in pdf form don't appear when viewing in Acrobat nor in Reader.

Texts in pdf form don't appear when viewing in Acrobat nor in Reader nor when printed after the form has been filled. But the texts appear when one clicks inside the field. What is the solution to be able to print and view all of the texts in all of the fields that have been typed.

More than likely caused by someone filling out the form with Mac Preview.
Here's a potential fix: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html

Names of columns don't appear when I read the report on WebI 6.5 ??

Names of columns don't appear when I read the report on WebI 6.5
The report was developped on BO 6.5 and was published on WebI.
When I read the report with the HTML mode, the names of the colums appear.
When I read the report with the PDF mode, the names of the columns don't appear.
I try to read the report with the HTML mode and after, I try to save it in pdf but it doesn't work. (it is the operation of conversion of pdf which doesn't work - it's very long and... nothing appends)

Hello,
This is the default column. I didnu2019t add column heading. But I replaced the name of the column by words.
I havenu2019t change the property of column heading.
It is a cross tab.

Certain web forms have formatting options like those found in Microsoft Word. They don't appear when I use Firefox, but do with IE of course. Is there a way to get it to display?

Certain web forms have formatting options like those found in Microsoft Word. They don't appear when I use Firefox, but do with IE of course. Is there a way to get it to display?

That formatting feature for text areas is known as Rich Text editing. Easy to enable on the web page with one line of code to tap into the Midas package that Mozilla uses, but the users can't enable it themselves from within Firefox.
http://kb.mozillazine.org/Rich_text_editing
http://kb.mozillazine.org/Midas
http://www.mozilla.org/editor/midas-spec.html

Just upgraded from OS x 10.6.8 to OS x Maverick & don't appear to have my music library in iTunes.

Hello,
We've just upgraded our imac from OS X 10.6.8 to OS X Maverick and don't appear to have any music library in our itunes. Help! Derry.C

Hi there derry.c,
You may find the troubleshooting steps in the article below helpful.
No content shows up in iTunes after updating
http://support.apple.com/kb/ts1967
-Griff W.

If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard

If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? Also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard 10.6.8?

No and Yes
Don't use TM for this purpose, clone your drive to an external, plug the external into another MBP and reboot from it. Please note that booting a machine that came with Lion may not be possible from a drive with Snow Leopard.

Files render, but adjustments don't show when exported or printed

Hello all,
Running Lightroom 2.2 on Mac OS 10.4
I'm experiencing some very odd behavior from a few files (originally NEFs converted to DNG; all from the same shoot/card). I am able to render adjustments in the Develop module but then two very odd things happen.
First, when I zoom to 1:1 preview the rendered changes do not appear; the file reverts to it's original state.
Secondly, and most importantly, when I export the files as a jpeg (whether from the Library, Develop, or Print module) the rendered changes do not appear and the file reverts to its original state. Again, same issue if I try to print the file -- the adjustments don't come through.
To further the mystery, this is only happening to a few files and I am able to manipulate the others and export them just fine. FURTHERMORE, when I open the same files on another computer that's running LR 1.4, I am able to edit and render the files AND see the changes upon export.
Any ideas?
Thank you in advance.
John

Duplicate the files in another folder, import them with 'do not import
duplicates' turned off in the import dialog, or import them into a
'test' catalog and see if they'll work. That'll narrow down whether
it's possibly a catalog glitch, and therefore how to solve it.

Chinese song titles don't appear when copied from iTunes Mac to XP

Hi all,
I've tried googling the answer to this but can't seem to find the answer so wondered if anyone can help me. Please?
I use a G4 MacMini at home running 10.4.11 and iTunes 9x and keep all my music on an external hard drive. I want to play my music using ITunes 10x on my PC at work running XP SP3. I need to reformat my iPod on the PC anyway cos at the moment it won't as it was originally formatted on my Mac.
I've copied my iTunes Library and my music files to an external hard drive and am using MacDrive so that I can copy them on to my PC, however I've noticed that the titles of the 20 or so Chinese albums I have don't appear. They appear as underscores not squares. The artists names appear ok but not the song titles.
I've installed the East Asian language pack in the Control Panel on the PC. On the Advanced tab, the Language for non-Unicode programs is set to English (UK) and the Code page conversion tables is set to 10002 (Mac - Traditional chinese Big5).
Is there anything else I should have done?
The Chinese song titles would have been imported automatically when I ripped them off CDs on the Mac.
Any help would be much appreciated.
Thanks

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Changes made on iPod don't appear when connected to iTunes

Long story short, iTunes doesn't like it when I make changes through my iPod, and tries to "fix" them.
If I delete a song or make changes to a playlist through the iPod itself, that change doesn't show up in iTunes. Deleted songs will be unplayable, but still appear. Newly created playlists may or may not appear. Deleted playlists are still there. Songs added to a playlist don't appear in the playlist, songs deleted from a playlist still appear in the playlist.
If I make a change to my iPod through iTunes itself, it reflects that change on my iPod, but also reverts any changes I've made through the iPod (so, if I remove a song from a playlist through my iPod, then connect to iTunes and remove a song from a playlist through iTunes, the song I removed through iTunes will be removed from my iPod, but the song I removed through my iPod will reappear). It will also occasionally re-load songs I've deleted entirely, though they'll be greyed out and unplayable.
As you may imagine, this is really annoying.
I have all types of automatic syncing turned off, and I don't store any music in iTunes itself once it's been put on my iPod.
I just want iTunes to show me what is on my iPod right now, and not revert back to whatever image it seems to have stored of my iPod when I try to make changes through iTunes. Does anyone have a fix for this?
iPod touch 4 with iOS 6.1.6
iTunes 12.0.1.26
MacBook Pro OS X 10.8.5

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Some Email addresses in Address Book don't appear when typing into Mail

Every now and then I start to type a name in the To: field in Mail when I know that name and address is in Address Book. The spelling is right and the sytax is right but there is no way that mail will recognize its existence. What can I do about this?

I am talking about the function as described in http://manuals.info.apple.com/en_US/Pages09_UserGuide.pdf Chapter 11 from page 246 to 252.
In my address book under Settings - Accounts I have two accounts. One is the Exchange Server and one is Local.
The addresses stored on the Exchange server appear complete and sound in Addressbook and exactly like the ones stored local. So from this side everything is fine.
But when I want to merge addresses from Addressbook in a Pages document then the Name, Company, Title appears correct, but Street (Work), ZIP (Work), City (Work) doesn't appear if it is an address that is stored on the Exchange account. If the address is stored on the Local account then it comes complete. In Addressbook both addresses come complete and don't show any difference.
So it isn't quite true that Addressbook is not designed to import data stored in another application, because part of the address is coming.
The Exchange account on Addressbook works exactly the same than the Local account. I can add data to the Exchange account and I can export data from it.

Adobe Muse: Slideshows and submenus don't appear when previewed or exported

Hi! I've just put together a site in the latest version of Adobe Muse. Everything seems fine when I preview within Muse but when I preview in Firefox or export to Business Catalyst, none of the slideshows appear, (where the pics are is just blank), and the submenus don't appear either. Any ideas?

Hi! It's OK I've solved the problem! At the cost of looking like a complete idiot I'm going to share this because others might be in the same situation. I remembered that a couple of weeks ago I turned off java script in all my browsers because I had a potential security risk (which I didn't), and was advised to do so. Now, I've turned Javascript back on, everything is working perfectly! Unfortunately this has taken me about 6 hours to work out! On the plus side at least now I know what my site will look like if someone is viewing it with javascript turned off! I've used Macs professionally for about 20 years so you can imagine how stupid I'm feeling right now! Thanks for getting back to me though!

New address book fields don't appear when importing CSV file

I've added two new fields to the Address Book template. The new fields appear when manually entering data for a new Card, but not when importing a CSV file. There's a drop down menu of field names for the import process but it does not include the new fields. Is there a way to modify this menu?

I would suggest looking at the Basic Troubleshooting steps at the following link:
http://support.apple.com/kb/HT3805
Specifically, for your Question #1 above, I would suggest the First Aid procedure and running the 'Repair Database' option listed in the linked page.
Note - I strongly suggest not running the 'Rebuild Database' option unless all other troubleshooting steps have been exhausted. This is also a caution given by Apple.
For your Question #2, if the repair database does not fix that one, then lower on the linked page you will find the procedure for 'Delete the user preferences' which has sorted the issue for me in the past. FWIW, I suspect that the OS X indexing (possibly for Spotlight) may have something to do with this issue.
As I think you suspect, you should be able to see the photos specific to each Project when you select it one in the library inspector (whether in the folder or not).
Note - the behavior of seeing all photos from all projects in a folder is correct.

HT4623 "Software update" (words)don't appear when I press settings/general.should appear below "about"on my iPad 2 version4.3.5(8l.1) tenable me to update to ios6 any help appreciated

In "settings/general" the words SOFTWARE UPDATE don,t appear below ABOUT or anywhere under GENERAL to enable me to update to ios6 . Any help appreciated.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

HT201272 cannot dowload message appears when tried to download tv episode from iCloud

trying to download tv episodes to device but 'cannot download' message appears when tried to. what can I do?

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

In 3.2, adjustments don't appear when moving back to library module from develop module.

Similar Messages

Maybe you are looking for