In a bit of a panic

Hello,
Hopefully someone can help me.
I bought a PowerBook G4 in Feb.
I recently started my PB up.
Everything is mysteriously back to default. Dock has moved back to the bottom. My Entourage Icon is no longer in the Dock. I also can not double tap the mousepad. My favourites have disappeared out of Safari.
Also, everything in Entourage has disappeared.
My PB has been working perfectly till this. I do not surf the web or anything on it.
Please help me in fixing this problem. I have not owned this machine for long (warrantee?).
I tried the Disk Utility. Everythings is clean.
Please help?????

Okay, it looks like you dragged your home folder to Macintosh HD. When you did that, it created a new home folder for you in /Users with the same name, but reset to defaults.
So per the instructions on the page I provided, rename the home directory in /Users with a "_new" on the end.
Then drag the one from Macintosh HD back into /Users.
Then log out and back in.

Similar Messages

  • KSLD bug report:  32 bit causes target panic

    Since the bug report link:
    http://soldc.sun.com/developer/support/driver/tools/KSLD/bug-report.html
    goes to a non existant email address, I thought I would post here.
    Setup:
    ksld 1.01
    target and host booted with kernel/unix (32 bit)
    /proto directory struct as described in starting ksld doc
    debugging ramd driver example
    ramd directory:
    drwxr-xr-x 4 root other 512 Feb 11 12:40 .
    drwxr-xr-x 10 root other 512 Feb 11 12:47 ..
    drwxrwxrwx 2 bin bin 512 Feb 11 10:26 777
    -rw-r--r-- 1 root other 341 Feb 11 11:31 Makefile
    -rw-r--r-- 1 root other 1610 Apr 24 2001 README
    -rw-r--r-- 1 root other 3588 Apr 18 2001 install
    lrwxrwxrwx 1 root other 52 Feb 11 10:47 misc -> /export/home/ksld-space/proto/root_sparc/kernel/misc
    -rw-r--r-- 1 root other 2523 Apr 18 2001 ntestram.c
    -rw-r--r-- 1 root other 2542 Apr 18 2001 printinfo.c
    lrwxrwxrwx 1 root other 6 Feb 11 10:46 proto -> /proto
    -rw-r--r-- 1 root other 25713 Feb 11 11:29 ramd.c
    -rw-r--r-- 1 root other 291 Apr 18 2001 ramd.conf
    -rw-r--r-- 1 root other 210 Apr 18 2001 ramio.h
    drwxrwxrwx 4 bin bin 512 Feb 11 19:51 sparc
    -rw-r--r-- 1 root other 1785 Apr 18 2001 testram.c
    lrwxrwxrwx 1 root other 67 Feb 11 10:48 unix.281 -> /export/home/ksld-space/proto/root_sparc/platform/sun4u/kernel/unix
    HOST output
    home1# ksld -t hardwire unix.281 99
    Reading unix.281
    KSLD v1.0 on sun4u [SunOS 5.8]
    Current thread is 0x4001fe60
    Reading krtld
    Reading genunix
    Reading platmod
    Reading SUNW,UltraSPARC-II
    Reading specfs
    Reading TS
    Reading TS_DPTBL
    Reading ufs
    Reading fssnap_if
    Reading rpcmod
    Reading ip
    Reading rootnex
    Reading options
    Reading sad
    Reading pseudo
    Reading sd
    Reading scsi
    Reading glm
    Reading pcipsy
    Reading dada
    Reading todmostek
    Reading procfs
    Reading sockfs
    Reading clone
    Reading ip6
    Reading tcp
    Reading md5
    Reading tcp6
    Reading udp
    Reading udp6
    Reading icmp
    Reading icmp6
    Reading arp
    Reading timod
    Reading conskbd
    Reading wc
    Reading ebus
    Reading su
    Reading kb
    Reading ms
    Reading consms
    Reading se
    Reading elfexec
    Reading fifofs
    Reading ldterm
    Reading ttcompat
    Reading zs
    Reading ptsl
    Reading ptc
    Reading rts
    Reading tl
    Reading keysock
    Reading sysmsg
    Reading cn
    Reading pipe
    Reading mm
    Reading hme
    Reading ufs_log
    Reading doorfs
    Reading devinfo
    Reading iwscn
    Reading log
    Reading sy
    Reading fctl
    ksld_dbx: can't stat /platform/sun4u/kernel/drv/afb -- No such file or directory
    Reading afb
    ksld_dbx: can't open /platform/sun4u/kernel/drv/afb -- No such file or directory
    Reading fd
    Reading busra
    Reading cs
    Reading winlock
    Reading seg_drv
    Reading usba
    Reading kstat
    Reading vol
    Reading cpc
    Reading tnf
    Reading pcihp
    Reading hpcsvc
    Reading pcicfg
    Reading nfssrv
    Reading nfs
    Reading rpcsec
    Reading tlimod
    Reading seg_mapdev
    Reading inst_sync
    Reading mntfs
    Reading tmpfs
    Reading klmmod
    Reading autofs
    Reading connld
    Reading bootdev
    Reading shmsys
    Reading ipc
    Reading ramd
    Reading kaio
    detected a multithreaded program
    t@0 stopped in (unknown) at 0xedd000d8
    0xedd000d8: ta %icc,%g0 + 125
    (ksld_dbx) module -v ramd.o
    Module: ramd.o
    Language: ansic
    Debugging information: read [stabs version: 3.1]
    Source file: /opt/SUNWddk/src/drivers/ramd/ramd.c
    Object file: /opt/SUNWddk/src/drivers/ramd/sparc/obj32/ramd.o
    Loadobject: /usr/kernel/drv/ramd
    (ksld_dbx) stop in ram_strategy
    (2) stop in ram_strategy
    poll in failed
    can't set breakpoint
    TARGET output:
    connected
    New connection: uid 0, fd 7
    Begin traceback... sp = edd48290
    Called from edd009dc, fp=edd47b41, args=34 edd308ee eddc40a8 34 edd042f0 edd042ec
    Called from edd03624, fp=edd47c11, args=fff74000 edda51f0 102d087a ffffffff91d0207e 0 4
    Called from edd0c0d0, fp=edd47cd1, args=102d087a 91d0207e ff1bd714102d087a 100 edd48608 27
    Called from edd0a394, fp=edd47d81, args=eddb7788 8 eddc16a1 f0000 1 ffff
    Called from edd176d4, fp=edd47e31, args=ffff eddb7788 0 1 0 eddc1690
    Called from edd0e470, fp=edd47f41, args=edd49058 0 0 3c 0 edda69d8
    Called from edd0e214, fp=edd47ff1, args=eddb6d58 eddc1690 edd49158 ffffffffffffffff 10000 edd483e0
    Called from edd0e154, fp=edd480a1, args=eddc1640 edda3550 0 0 0 0
    Called from edd071b4, fp=edd48121, args=0 0 0 0 0 0
    Called from 0, fp=0, args=0 0 0 0 0 0
    End traceback...
    abort jump: trap 34 sp edd48290 pc edd042ec npc edd042f0
    etext edd308ee estack edd489a0 edata edda2388 nofault edda2658
    ksld_kadb[0]: (`o403P0801So6mLD42d8N_lK^bH00004)(`o403P0801So6mLD42d8N_lK^bH0000
    panic[cpu0]/thread=4001fe60: BAD TRAP: type=34 rp=4002fbc0 addr=40030507 mmu_fsr=0
    sched: alignment error:
    addr=0x40030507
    pid=0, pc=0xedd2ba78, sp=0x4002fc50, tstate=0x1404, context=0x0
    g1-g7: 1000c000, edda1f78, edda1f78, 0, edda2658, 14aef0, 4001fe60
    panic: entering debugger (continue to save dump)
    Trap 7d
    What is wrong with the setup,when a breakpoint would cause a traceback and panic on the target?

    One other possibility is having sufficient rights, especially if you are invoking it via some other app, rather than manually as a logged in user. If you are not logged in and instead invoke it via a web site action, I believe you will have problems reading the registry, accessing a desktop, writing to disk, etc.
    Sorry I can't be more definitive, but perhaps it will help.
    Please post your conclusion, if you find it.
    --Ian

  • 2007 Macbook pro kernel panic, hard drive problem?

    Hello!
    I've been trying to sort this for a few weeks now, and I'm hoping someone may be able to shed some light on the situation.
    Problem:
    I have a 2007 15" MacBook Pro (MacBook Pro 15/2.2/2GB/120GB) which a few weeks ago suddenly died on me. It has what I believe is called a kernel panic. On startup a grey screen falls down with a box saying that I need to restart the computer.
    I took it to my local apple store where they booted an OSX (not sure which) from an external drive (I think it was using a firewire cable). The MacBook appeared to work fine from this external hard drive, but when disk utility was run on the internal hard drive, the disk utility eventually froze.
    Based on this info, the guy there deduced (fairly reasonably I suppose) that the problem must be my hard drive, and replacing my hard drive should solve this. So  bought a
    Seagate Momentus 7200.4 500 GB,Internal,7200 RPM,6.35 cm (2.5").
    The equipment I now have to try and get my MacBook to work:
    - An iMac 2.7 Ghz i5 (8gb Ram) running Mac OSX 10.7.5
    - A replacement hard drive for the MacBook (Seagate Momentus)
    - A SATA HArd drive USB docking station
    - A 500gb iOmega Hard drive with Firewire 800 cables
    - The 2 original install disks for Tiger that came with the MacBook Pro
    - A working .dmg of retail snow leopard
    What I have tried so far:
    I have formatted the replacement hard drive correctly (GUID) for Mac OSX. If I turn the macbook pro on with the new hard drive in, a folder icon with a question mark in it flashes in the middle of the screen... If I put in the original install disk, it starts to read it (apple logo and spinning wheel) and then eventually kernel panics. When I hold option on start up, the 'Mac OSX Install Disk 1" is the only option available (the cd/dvd drive must be working if it recognises the disk here i assume?) but when I select it, it spins for a bit, then kernel panics.
    My next approach was to try and create an installable and bootable version of an OSX on an external hard drive. (I have tried this with both the original Tiger install disk, and with the leopard.dmg)... I followed the readily available instructions online on how to do this, and was able to restore the first partion on the external hard drive with the OSX install disk image.... The problem I have then face is installing the osx onto the second partition.
    This seems to be because my newish iMac/OSX wont let me boot any OSX installer CD/firewire or otherwise, other than the original operating system for the iMac.
    I thought this wouldn't matter, as I would be able to run the installer when I plugged the iOmega into my MacBook pro. The problem I now have is that the Macbook wont recogninise the iOmega when it is connected by firewire. It will only recognise it when connected by USB, but when I try and run the installer, it spins for a while then kernel panics. I believe this is because MacBook pros of this age will only run OSX Install/bootable through firewire.
    So... hardware wise, could this be anything other than a problem with the hard drive? As we know the MacBook pro will boot from an external drive...
    If anyone has actually managed to read this far into this incredibly boring, waffling description of my problem, I am already grateful, and if anyone can give any help or advice at all regarding this, I will be eternally in your debt....
    Thank you

    I have a 2007 15" MacBook Pro (MacBook Pro 15/2.2/2GB/120GB)
    The MacBook Pro 3,1
    So I bought a Seagate Momentus 7200.4 500 GB,Internal,7200 RPM,6.35 cm (2.5").
    Right the standard hard drive (not the XT which is a hybrid and can be problematic)
    a folder icon with a question mark in it flashes in the middle of the screen...
    That's the firmware telling you it can't find the/a bootable OS.
    The 2 original install disks for Tiger that came with the MacBook Pro
    If I put in the original install disk, it starts to read it (apple logo and spinning wheel) and then eventually kernel panics
    but when I select it, it spins for a bit, then kernel panics.
    Your machines firmware was updated, it will only now boot from 10.6 either on a bootable USB thumb drive or via the white 10.6.3 retail disks you can get by calling Apple by phone.
    This seems to be because my newish iMac/OSX wont let me boot any OSX installer CD/firewire or otherwise, other than the original operating system for the iMac.
    True. If the iMac could boot from the 10.6.3 disk, then you could install 10.6.3 via Firewire Target Disk Mode onto the other Mac if for instance the Superdrive didn't work.
    MacBook pros of this age will only run OSX Install/bootable through firewire.
    True.
    Just order the 10.6.3 white retail disk from Apple via phone, forget 10.4 and 10.5 as they are not getting updates anyway.
    However you can extract iLife from the 10.4/10.5 machine specific disks using Pacifist from CharlesSoft.
    Follow these install instructions
    How to erase and install Snow Leopard 10.6

  • Intermittent Kernel Panics - maybe related to iTunes? Something else?

    I have been experiencing intermittent kernel panics the past few weeks - the ones where the screen goes grey and you get the message in multiple languages telling you that you have to restart your computer. I have been trying to figure out exactly what is causing them and, thus far, have been unable to come up with a definite pattern. It does seem that I am starting to narrow things down a bit.
    The panics seem to occur when I have a lot of program running simultaneously. I usually have Eudora and Safari running most of the time, and will often fire up Power Point and Word. Then, I may add Excel, Preview, maybe Acrobat or Acrobat reader - I think you get the picture. However, it SEEMS that the culprit in all of this is that if I have had iTunes running, the kernel panics are more likely to occur. However, iTunes does not have to be running at the time of the panic (although I would guess that it has been in over half of the panics I’ve experienced). It just has to have been run recently. I
    I have done a lot of troubleshooting, such as running Apple Hardware Test and other utilities and everything comes up just fine. I have done all the maintenance routines, I am using Apple RAM. I have done a lot of the other voodoo that folks suggest in these cases. I have read these forums and most of the posts relating to kernel panics are not quite what I am experiencing. (I did read about some of the audio issues that folks have been experiencing and I just uninstalled the SRS iWOW plugin from iTunes and will see if that makes a difference.)
    One final thing. Recently, when I get a panic, there is no record of it in any logs that I can find. Therefore, I cannot trace what was happening just before my MacBook Pro went down. I did find one log (I forget which one now) that suggested that before the most recent panic this morning the last thing logged was activity by DefaultFolder. However, that may have just been the last thing I did that was actually logged. I had stepped away from my computer and when I came back the kernel panic screen was showing.
    I am guessing I may need to do a clean reinstall, but before doing that I thought I’d call upon the collective wisdom of the members of these forums. Any ideas or suggestions would be appreciated.
    Bob Q.

    We had a kernel panic last week - iTunes (v.7) was running at the time, so was Mail, but I was building a photo album in iPhoto when it happened. After reboot (took a LONG time to boot up) We repaired permissions and went on as normal. Previously, we had a hard shut down due to a power outage (don't ask: yes of course we have a UPS, but the outage had lasted all day. when the power finally came back on, i powered up the computer and launched Mail. Then the power failed again (grrr!), and apparently, after being out all day, the battery in the UPS didn't even have enough charge for me to have time to quit Mail and power down.)
    Then we began to have spontaneous Sleep syndrome: the computer would just suddenly sleep during activity. After this happened a few times, we reset the PRAM, ran the maintenance scripts using Terminal, but the problem persisted. In fact, once it went beyond sleep and shut itself down.
    This week, we went into the System Errors log and found this:
    kernel[0]: IOSMUPwrController:: OverTemp notification
    kernel[0]: Power Management received emergency overtemp signal. Going to sleep.
    kernel[0]: System Sleep
    kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
    kernel[0]: System Wake
    kernel[0]: Wake event 0020
    kernel[0]: USB caused wake event (OHCI)
    kernel[0]: FireWire (OHCI) Apple ID 52 built-in: handleSelfIDInt - received quads == 0. issuing bus reset
    kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
    mDNSResponder: Repeated transitions for interface en0 (192.168.2.6); delaying packets by 5 seconds
    So at this point, we're thinking that the computer was overheating. We've since cleared some space on the internal HD (we only had about 5% available) and also physical space around the unit. Haven't had the problem in two days now. Never had a second kernel panic either...
    But we have heard that possibly the fan might be failing... we're still under AppleCare warranty and are thinking that we should maybe call Apple to open a trouble ticket just in case.
    your thoughts?
    Message was edited by: kalaluka

  • Mac OSX 10.6.7 don't boot in 64-bit mode

    Every time I try to boot in 64-bit mode, it freezes in boot screen with the "NO ENTRY" symbol on it. When booting in 32-bit modes, it goes OK.
    But I have 8GB RAM, so 32-bit + 8GBRAM = Kernel Panic.
    Any ideas of how to solve it?
    Best,
    Marcilio

    You have some 32-bit driver (that you didn't have before it sounds like).
    Wherever you got the idea that OS X and some 4GB limit, each application or thread might have 4GB address space, but OS X has supported 32 and even 48GB RAM on appropriate hardware.
    If this was a RAM issue, you could remove your (3rd party) RAM and still boot in 64-bit kernel mode.
    As to whether your system is benefiting from 64-bit kernel mode I'd take a look at
    http://www.macperformanceguide.com
    To be 64-bit kernel mode everything must be "64-bit" and that means drivers, plug-ins and other items.

  • Slight Panic - Volume Needs Repair

    Ok, so I am in a bit of a panic mode here right now. I started hearing a whine from my system hard drive today, so I backed it up and ran Disk Utility's "Verify Disk" option on it as a first step. Disk Utility tells me that there is a minor error and that the volume needs repair. Great. No problem. Except my machine refuses to start from the system DVD's that came with my G5. It's a revision A, so it came with Panther on it, but should that make a difference? I get as far as the blue screen when trying to boot from the CD and then it freezes. What are my options here? I need to repair this drive and see if the whining problem disappears and it comes back verified clean. HELP!?
    EDIT: The error that comes back is: Volume Header needs minor repair. The volume MacintoshHD needs to be repaired. Error: The underlying task reported failure on exit.
    Just moved this from the G4 forum. Didn't realize that's where it was! LOL. See what panic does?

    So, I went with Bmer and the fsck option. I ended up
    having to use the -f command rather than -y, not sure
    why. It said it has something to do with the volume
    being journaled. At any rate, after locating the
    problem, it repaired itself and all is back to good!!
    I ran disk utility immediately upon restart and the
    volume passed. In addition, the whining that made
    me feel like I was at a loud rock concert last night
    is now gone as well. THANKS, BMER!!
    Your welcome! I always recommend running fsck too after "forcing" your computer to restart after a crash. Your HD directory can get messed up and add to the original problem.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
     An Apple User Group 
    ITMS: MacOSG Podcast >>

  • In a panic - deleted event/projects

    Hello,
    I'm in a bit of a panic.  In an effort to clean up my library, I mistakenly deleted an event that held multiple projects, etc.  I see the folder in the system trash (with all relevant projects and such) but can't seem to get it back into FCPX (10.1.3). Simply dragging it into the Library's Project and Events folder via the Finder doesn't seem to do it. It never shows up in FCPX library.  Any suggestions/advice would be MUCH appreciated?
    Thank you!
    David

    Did you delete the event from inside the application or in the Finder? Where is the media? Inside the event or external to the library?
    With the application closed, try putting it back in the library bundle and moving the flexolibrary file to the trash? If not, go to a recent library backup.

  • Panic - Restored .fla´s does´nt open

    I´m in a bit of a panic here...
    Does anyone know of a Recovery Tool that actually works with
    .fla´s???
    Yesterday I deleted a number of .fla-files.
    Yes, I know, it was my mistake!!!.
    Now I´ve tried several software recovering files deleted
    by accident.
    But none of them restores .fla-files so I can open them in
    Flash 8
    File-icon is OK
    File-information is OK
    Files size is OK
    But when I try to launch the file....
    Unexpected File Format is the message.
    I tried to open in an older version of Flash with the same
    result.
    Running Windows 2000
    Flash 8 Professional
    zenkert

    Ah, I tried the one you sent, but it failed...
    I made a manifest file called mainClass.txt with these contents (including pressing enter after)
    Main-Class: tictactoe
    then I used the command prompt to do this..
    jar cvfm classes.jar mainClass.txt *
    classes.jar was the jar I wanted (which was created) and mainClass.txt was the manifest file
    Sadly, the thing will still not run, and it is driving me insane!!!!
    anyone have any comments......?

  • Xmas Panic! G4 wont start up!

    For the first time in as long as I can remember I turned off the power at the wall socket before I finished at xmas... just got back to work and it wont fire up!
    All I get is the blue light behind the 'on' button - briefly. No fans - no boot sound.
    I've opened it up and pressed the PRam button (by the battery)... still no joy, I'm sure it did the same thing after a powercut year ago, but can't quite remember what I did to reset it.
    Today I popped into PC world with the 3.7v battery, I thought that would be the best place to start as its 8 years old now... but they don't sell them - although the tech guy but a volt meter on it and still reads about 3.6v.
    I've read a couple of threads similar to this, but they didnt seem to conclude, so sorry if its a repost - I'm in a bit of a panic because I need to finish a job by the 5th of Jan, but all my Apple repair centers near me are closed! (and I'm about at my technical knowledge limit ie: not much!)

    c) It seems even though the battery was reading 3.6V on the meter it still seemed TOTALLY dead when reinserted into the machine... it was 8 years old after all... I wonder if the 3 days of no standby power had totally drained it and even though the volts still read correct, it died under the sudden load needed to power-up.
    You need to test a battery under load for the readings to be truly accurate. By attaching it to a meter you aren't really asking it to do any work.
    If you have a digital multimeter you can check the condition of your present battery. It should read at least 3.2V if it is the 3.6V half-AA battery type. Ideally this should be measured while the battery is under load; added recommendation from Hans777:
    I have recently found out that an exhausted battery will still indicate >3.6 V with a high internal resistance VM.
    Checking incircuit: powercord disconnected press PMU reset button for >about 5 sec before measuring.
    Checking outside: load the battery with a 1500 Ohm resistor when measuring.
    Alternatively, test the battery while it is still in the computer.

  • HELP! Hard drive removed from old Mac Pro won't work as external in USB enclosure...

    Hi guys,
    I guess we've all been in this position at some point with our music technology, but today it is my turn to panic!
    I have sold my Mac Pro (2010) and moved over to an iMac, now that they have great performance and internal SSD, etc.
    Before selling the Mac Pro, I removed the internal HDs I was using for audio, instruments, backup, etc...
    I have now installed the audio HD into an external USB3 enclosure, which I had assumed would mean I could access my audio work (pretty much all of it over the last 4 years) and move tracks over to the iMac or a new external HD as necessary.
    Unfortunately when I switch the enclosure on, I get the message "The disk you inserted was not readable by this computer"... pretty much what I would expect if it were a new drive, but not what I was expecting given this drive was fine in my Mac Pro, and was obviously Mac formatted.
    So I'm in a bit of a panic! I'm wondering if anyone has any suggestions as to how I can solve the issue - obviously without initialising the drive (which is the only option the warning message gives me!).
    I do have a friend who has a Mac Pro, so I have the option of taking the drive over to him and pulling the audio off onto a standard external drive... but if there is another way to solve the problem I would be pretty happy!
    Thanks in advance for any advice or info you can offer!
    Cheers,
    Mike

    yeloop,
    Well that depends...
    In the past I have managed to restore/repair drives with DW that nothing else would recognize let alone fix... so it's one of the 'tools' that I keep in my 'repair bag' and the few times i have needed it, it has paid for itself over and over again.
    However, the fact you can mount the drive with your MBP but cannot with your iMac, is a little strange and points to something else that maybe is not related to a physical issue with the drive but something else going on with either the enclosure you used or even your iMac and it's USB3 ports. If it wasn't for the fact you can mount it on your MBP I would have said disk corruption but I don't think that is the problem now....
    Got anything else you can plug into those USB3 ports on your iMac.. like another USB2 drive that you know is fine, just to test the ports themselves?

  • Mail won't open on macbok air

    Hi there,
    I'm in a bit of a panic because when I press the Mail icon on my macbook air - the page opens but then the small ball just keeps on rolling and it doesn't actually open. I have tried doing a Force Quit and restarting the computer 3 times but it still won't open!!! I have all my work and mails in this application and would be devastated to lose it...what should I try next...??? Could anyone out there help me please coz I don't get it..:-(
    Thanks..

    If you have no backups at all, I suggest you shut down the computer immediately and don't turn it on again until you have at least one external hard drive (two or more recommended) to dedicate to backup. Each backup drive must have at least enough capacity to hold all the data on the internal drive comfortably, as well as any data that you have on secondary drives. Then follow the instructions in this support article.

  • After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours. Help!

    After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
    I tried quitting and starting again but it just jumps back to the same spot.

    It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
    (I was unable to seach properly before which is why I posted the question - it was a bit of a panic)

  • Layout adjustment sometimes not working

    I'm in a bit of a panic here. We've set up a file that we're due to deliver to a client today, the file has multiple master pages with various margins.
    Normally in this type of situation we turn on the layout adjustment so that the text frame moves with the margins when the new master is applied. Normally this works just fine, we use it all the time, but for some reason its randomly NOT working! i.e. the text frame stays the size it was.
    There doesn't seem to be any ryme or reason to it, sometimes its a left page, sometimes a right page.
    Any ideas?
    Thanks,
    Ken

    Yeah, I tried. Nothing seems to work all the time as is usually does.
    I'll have to look again and see if I can find some correlation with the
    pages that do not adjust.
    Oy!
    Thanks again

  • Help need to switch Muse site to BC on a allready hosted plan

    Hi,  i also posted on BC forum...
    I have a client that was in a hurry to have his emails accounts before the entire website.
    So i went on and bought the email marketing plan (cos he will also need to do email campains) an pointed his domain everything is working fine, at this moment he has his accounts the domain is live.
    The site would be just a small 7-10 pages not to complicated.
    Has a graphic designer (who has venture into Business catalyst cos it had all the solutions i needed, well that's what the promotional videos said anyway) I made a site in Muse.
    First i did a temporary page thats says "comming soon", and then i made the entire site, all the design and menu but with blank pages cos the client didnt have all the content yet (and still dont have). I uploaded that site to a sub directory so he could see the evolution.
    He approved the design, yay!
    At the end of the process, he told me he needed to have full control with the editor. (style, images, bulleted list, need to put downloadable document like pdf etc.) i told him that he could only modify what was allready there with the Muse in Browser editing (that he saw when i made the pitch using another site) he was impress with the way it worked.
    so i told him i would have to remake "template".
    I thought of using a BC template, and modify the looks to adapt to my client image, Of course, use a responsive theme so he could make the change at one place only. (cos in Muse you need to make the changes on the 3 layouts).
    Now, i created a new temporary site using one of the new responsive template available.
    How can i import that new site onto his live domain? In other words, how can a switch from a theme made in Muse, to a BC template?
    cant i just delete everything in the root folder, and upload the entire new site via ftp?
    please help me find the solution. i am a bit in a panic here
    hope you could understand my lousy English.
    Sincerely,
    i.d.

    This would need to be transparent for m'y client...
    Y
    Envoyé de mon iPhone
    Le 2014-04-20 à 15:29, Sanjit_Das <[email protected]> a écrit :
    Re: help need to switch Muse site to BC on a allready hosted plan
    created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
    Thanks for additional details.
    Unfortunately we cannot change site template of a live site in BC , but as a workaround Create a site from BC using the template you wish to use then publish the site from Muse to the site created from BC and transfer the contents stored from live site to trial site. Ater final transition is done , you can delete the already paid site and make live the new trial site which includes new site template.
    Thanks,
    Sanjit
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6314730#6314730
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6314730#6314730
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6314730#6314730. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Will Pages under Lion be able to open old AppleWorks documents in the way that it does under Snow Leopard?

    I've just read a thread  that suggested that Pages will be able to open AppleWorks documents under Lion,  is this correct?
    I understood from discussions last month that one had to convert all  old AppleWorks documents to Pages or Word or some other format BEFORE upgrading to Lion as Pages would not be able to read them afterwards.
    I wanted to pass on a tip that if you have used the AppleWorks password protect on your files, you will not be able to open them in Pages, so you need to open them in AppleWorks first, and take the password off, or save them as a file which is not protected, or some similar work around.

    The Apple Support Community (us) just calmed me right down!  Hi everyone.  I just down loaded Lion through the Apple Apps Store and blindly went ahead and installed it, putting my mental well being in Apple's hands, having trusted Apple since my first Apple II (1974?).  But ... "What do you mean, Appleworks isn't supported?"  In a bit of a panic, wondering what was to happen to my vast (really) stock of AW documents I came to Apple Support for help.  Thanks to the input from Sue, Cornelius, Jonanna and others I took the leap and, clicking on the "OpenApple"-I, accessed the "Open With" switching the AW document to open with Pages. In a word, perfect. And, it looks like Lion has already told itself to open all AW (remember Claris?) documents with Pages.   CM
    ( Except I just spotted a thread titled "AppleWorks doc won't open in Pages" ... Going there next. )

Maybe you are looking for