In a PrC, how to delete data from the PSA that have been loaded in Prcs Chn

Hello,
In a process chain, how can I delete the data from the PSA that have been loaded within that process chain. I don't want to delete data that belongs to other business units that use the same datasource.
Thanks,
Andre

I dont think so you can achieve that, PSA is actually datasource dependent.
One you load from a datasource to PSA.That is accesible by multiple DTPs if you have created so.
As you said "I don't want to delete data that belongs to other business units that use the same datasource."
If you delete the PSA, you may have to repull the data from source system again and if thats delta it wont work out.
As said by above ppl you can include the "Delete PSA" in process chain but choose some 15 days buffer.
Hope this helps.

Similar Messages

  • How do I delete photos from my iPhone that have been downloaded from my pc?

    I am not sure how to delete photos from my iPhone that I have downloaded from my pc or that I have taken with my iPhone (on my camera roll)

    "I am not sure how to delete photos from my iPhone that I have downloaded from my pc"
    The same way you put them there.  The sync process.  open itunes, connect iphone, select what you want on the iphone , sync
    "or that I have taken with my iPhone (on my camera roll)"
    You can delete them when you import the photos to your computer - using whatever softare that you import them with or you can go to the pics and hit the trash can on the bottom of the screen.
    iPhone User Guide (For iOS 5.1 Software)

  • How can I delete albums from my Ipad that have been copied from my PC?

    How can I delete photo albums from my Ipad that have been copied from my laptop?

    To delete photos from your device
    In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
    Choose "Sync photos from."
    On a Mac, choose iPhoto or Aperture from the pop-up menu.
    On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
    Choose "Selected albums" and deselect the albums or collections you want to delete.
    Click Apply.

  • How to control use from using GL that have been retricted

    Hi SAP Expert,,,
    the scenario is like this, i need to create new roles in order to control certain user from finance dept which there are no have a authorization to POST certain GL.
    i have check my current roles setting, it seems there are no roles that have been created so what is the object that can i use ?

    OK
    The easiest way to do this is to work out the GL accounts you want to use.
    Add an authorization group in control data in the GL master FS00.
    make sure the users have the same authorization object in the profile which is
    F_BKPF_BES  and BRGRU = your new authorization group.
    In terms of restricting the postings for certain periods, the authorization group needs to be added in OB52 against the correct posting period variant, and the users will need access to the authorization group in their profile via F_BKPF_BUP.
    You may need to run this by your secruity officer, however authorizations are maintained in PFCG.
    Please award points if this is useful.

  • How to delete data from the table PA0007

    Hi Friends,
    Thank you for your kindly help.
    When I upload data to infotype 0007(planed working time),
    there is something wrong with the infotype 2011. So I want
    to delete the data of  infotype 0007. While using the program RPUREOPN to delete the data, the system will say:0007 cannot be deleted because of time constraint 1/A.
    Now how can I delete the data from table PA0007?
    Pls help me urgently.
    Best wishes
    Anne

    Hi Sikindar,
       Thank you for your help.
      There is another question. There are five clients (Client 300,310,320,330,350) in my HR DEV system. I just want to delete the data of infotype 0007 in client 350. When I change the the time constraint and delete the data in client 350, the data of infotype 0007 in other clients will be safe or not?
    Thank you again for your help!
    Best wishes
    Anne

  • How do I delete photos from my ipad that have been imported directly from a memory card.

      I have searched loads of forums and they all talk about using itunes to delete photos, but this seems to only apply to photos that orginated from a PC. The photos I am trying to delete were loaded directly on to my ipad from a memory card and don't appear in itunes. I know I can delete photos individually on my ipad but I have hundreds of them, The only option I have found that comes close to what I want to do is back-up ipad, delete photos I don't want to restore (not sure where to find back up or how to delete), rebuild ipad and restore -  this seems a long winded way of doing something that would take less than a minute in windows. I have an ipad1 and am running windows 7 on a standards Windows PC.
    Many Thanks in anticipation that someone will be able to help me
    Regards
    Keith

    Photos copied to the iPad via the camera connection kit (and those taken with the iPad or saved from emails/websites etc) should appear in Windows Explorer on a PC so you should be able to delete them from there - those types of photos should make the iPad appear as a camera to your computer. You should also be able to delete them at the end of the photo import process via, for example, the camera wizard.

  • How can we  identify the mails from the mails that have been read previousy

    Hi
    i m using java mail api to fetch the mails. but i am facing a problem that is every time i fetch all the mails in my application.
    Is there any way by which i can set a flag or something so as to i can identify the mails which have been processed earliar.
    please help me out.
    Dushyant Kumar

    POP3, right? See the JavaMail FAQ.

  • I am trying to debug HTBasic code modules while using Test Stand, how do I refresh the subs that have been loaded in memory?

    I am writing an application for Test Stand, we are using modules previously written in HTBasic. Whenever I make a change to the code and try to re-run the program, it just runs the old version of the code. The only way to refresh the code is to close Test Stand down and restart it. Is there a way to flush the memory of modules?

    Hi,
    I haven't used HTBasic with TestStand 2.0.x, but I'm assuming that you have the steps in the sequence set to unload when sequence file is closed (look under the step properties -> run options tab).
    If you're still prototypeing, use the File->Unload all modules option. Have a look at page 4-3 in the user manual - it refers to .DLLs, but I'm assuming the HTBasic falls into the same methodology.
    Altering the run options from it's default will affect the memory useage and speed of execution of the test sequence. Have a look at page 5-22 (page 158 in the .pdf) in the TestStand user manual - basically, if a code module is loaded into memory already, when the step gets to execute, the loading overhead is already done. If it stays in memory after this, then it's avail
    able for next time (quicker second run 'cos it doesn't need to load again. However, the balanceing factor is the sequence is useing more memory at a time, by haveing the module ready.
    My usual setting is to use Load dynamically, and Unload after sequence executes. I use this is only during development however, as this is not the most speed friendly, but a compromise so that if I don't call a step I don't load it, but if I do use a step, I'm sure it's free again when I need to modify the .dll modules I create. If you have a look on page 5-7 (143) of the user manual you can set the sequence file to effectively over-ride each step's load and unload settings - useful if you want to revert back again later. If you use this, you'll see that the top two run options for the step are greyed out, but if you set it back with the sequence file options, they do revert back to their original settings.
    Hope that helps (and works!!)
    S.
    // it takes almost no time to rate an answer

  • How to delete data from single field in a database table?

    Hi guys,
         Plz suggest me How to delete data from single field in a database table?
    thnks,
    pavan

    hi
    in addition to abv details..chk this:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb3aef358411d1829f0000e829fbfe/content.htm
    http://dev.mysql.com/doc/maxdb/en/34/ee7fbd293911d3a97d00a0c9449261/content.htm
    regards,
    madhu

  • How i cen get back deleted data from the bin?

    how i cen get back deleted data from the bin?

    Not once you have put the data in the trash and pressed the button to delete it.
    There may be some hope if you can understand what I am telling you in my first post to you.
    Time machine is too complex to explain in this kind of post but I am giving you five links below which should explain quite a lot.   There are no formal instruction manuals for Time Machine.
    Time Machine Tutorial
    Time Machine 101
    How to back up and restore your files           This in particular
    Time Machine Features
    Apple - Support - Mac OSX v10.5 Leopard Time Machine

  • How to read data from a file that was formatted by excel?

    Hi everyone, I'm familiar with java.io and the ability to read from files, can anyone tell me how to read data from a file that was formatted by excel? Or at least give me some web references so that I can learn about it?

    http://jakarta.apache.org/poi/hssf/index.html
    HSSF stands for Horrible Spreadsheet Format, but it still works!

  • I'm moving an internal hard drive from an old computer to a new computer.  How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

    I'm moving an internal hard drive from an old computer to a new computer.  (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?  Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

    The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
    The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
    The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
    It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
    If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
    Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

  • How to download data from the icloud?

    How to download data from the icloud?

    Settings>General>Reset>reset all content and settings. When iPhone restarts you will guide to restore from iCloud backup

  • I joined this community in error and don't know how to delete myself from the group. Can someone please advise me on this ?

    I joined this community in error and don't know how to delete myself from the group. Can someone please tell me how to do that ?
    Thanks,
    Skeebo

  • How to acquire data from the memory of multimeter

    I am a beginner of Labview. I don't know how to acquire data from the memory of multimeter.
    I read some examples about DAQ, but it seems not similar to my case. I can't use DAQ in my computer, as I don't have DAQ board.
    Could anybody give me some guide? Similar examples would be great.
    Solved!
    Go to Solution.

    Confirm that you have the VISA Run Time Engine on the target machine. If you do not have it installed, you can install the VISA Run Time Engine from ni.com.
    Error -1073807346 Using VISA When Running LabVIEW Executable On Target Computer
    Message Edited by Mathan on 10-12-2009 07:11 AM

Maybe you are looking for

  • Wireless Kernel Panics Fixed with Airport Update

    It has been 48 hours - not one kernel panic due to wirless. (and I have downloaded plenty of files, the first thing to trigger shutdown) My heart has sunk a few times when the LCD looked like the gray veil was about to drop, relief just web page chan

  • What's a good codec pack for Mac?

    My friend recommended K-Lite Codec Pack, but it only works on PC and I have a Mac. Is there a good codec pack for Mac?

  • Lockbox user exit

    Dear Experts, For lockbox procedure in SAP customer identification is the primary task of the initial data processing of each lockbox payment. Finding the corresponding document clearing information is the second task. Lockbox program RFEBLB00 for BA

  • Identify which updates Adobe Application Manager refers to.

    Windows 7 64 bit, CS6. I seem to have the common problem of Adobe Application Manager pop-ups. It just tells me there are updates to be had, not which ones.  Then the Manager does not work (gets as far as 'checking', then freezes on the buffering sig

  • Dot BAT files in Windows 8.1

    How do you activate the dot Bat file for execution on the workspace and/or in the startup menu? Jim