In a vtp domain how many server mode switches can be

dear sir,
in a vtp domain how many server mode switches should be.
what role transpranent mode vtp domain and were we are using it.

Hi Mukhtar,
You can have all the switches in server mode in your network but it is always recommended to have atleast 1 and better to have 2 in your network.
One is required because VTP server is the only switch from where you can modify, add or delete vlan and it will be propogated to all client switch but 2 is recommended to have redundancy incase your one VTP server goes down you will be having another ot take care of your network.
Talking about VTP mode transparent, this mode will allow you to create,delete and modify any vlans but will not participate in any VTP messages and it will also not propogate its VLAN information to anyone in the network.
Also if you want to go for extended range of vlan which is above 1005 you have to configure your siwtch in VTP transparent mode only.
To know more about VTP have a look at this link
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12120ea2/2950scg/swvtp.htm
HTH, if yes please rate the post.
Ankur

Similar Messages

  • How many server licenses do I need for SharePoint 2013?

    I am new to the concept of CAL. I am reading about it. I found this linkhttp://sharepoint.stackexchange.com/questions/101914/how-many-server-licenses-do-i-need-for-sharepoint-2013
    Suppose there are 2 users in the sharepoint farm. As per above link we requires 7/8 server license. So my question is do we requires 7/8 licences per user basis (2*7/8) or we requires 7/8 licences once only then we require 2 more licenses for 2 users (7/8 +2)?

    The second option.
    If you have 7 SharePoint servers then you need 7 SharePoint Server Licenses.
    If you have two people in your company who can use SharePoint then you need two Client Access Licenses (7 server, 2 CAL).
    If you had two hundred thousand users who could then you would need two hundred thousand CALs, but the number of server licenses would not change. (7 server, 200,000 CALs).

  • SP500 tape library - how many server/SAN FC interfaces do I need?

    How many server or FC switch interfaces do I need to connect SL500 FC tape library? Let's say we have two FC tape drives installed. Does it mean I need to reserve 3 FC interfaces (one for robot and one for each drive)? Or there is some kind of internal hub/switch which permits to use one FC port to connect them all in a way which is implemented in SL48 library?

    Hello,
    if one VMWare host should run more then 2 VMs you need a Windows Server 2012 R2 Datacenter edition (unlimited versions from Windows VMs on the host) from Windows or 7 Windows Standard licenses (max. 14 VMs).
    Keep in mind that processors count into the license requirements.
    "...using VMware for high availability..."
    This means that you should have at least 2 VMWare hosts which have the RAM and processors to run in caseof hardware problem from the other host ALL VMs.
    So you are now need at least 2 Windows Server 2012 R2 Datacenter licenses or 14 Standard editions.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • How Many Server is needed?

    Hi,
    Currently we have 2 servers with installed application as follows:
    Server 1:
    - Hyperion Essbase
    - APS (for redundancy)
    - EAS (for redundancy)
    Server 2:
    - OAS (Oracle Application Server)
    - Hyperion Shared Services
    - Hyperion Planning
    - Financial Report
    - Web Analysis
    - EAS
    - APS
    - Workspace
    We plan to upgrade from version 9.3.1 to version 11.1.1.x
    And will add HFM (Hyperion Financial Management) into the solution.
    We have around 100+ users for Hyperion Planning and 50+ for HFM.
    Questions:
    How many server do we need for our solution. And what should we install on each server?
    Here is what we think:
    Server 1:
    - Hyperion Essbase
    - APS (for redundancy)
    - EAS (for redundancy)
    Server 2:
    - OAS (Oracle Application Server)
    - Hyperion Shared Services
    - Hyperion Planning
    - EAS
    - APS
    - Workspace
    Server 3:
    - Financial Report
    - Web Analysis
    Server 4:
    - HFM
    Any Feedback is appreciated.
    Thanks,
    Lian

    Tom,
    You could use SAP Site for benchmark reference on SAPS number.
    It is here: http://www.sap.com/benchmark

  • How many server nodes can you create per instance

    Hi,
    Very often the bottle neck in a java installation (NW04s) is the heap size. In order to increase the heap you simple create new server nodes.
    My question is:
    How many server nodes can you create per instance?
    Is there an upper limit before you have to create a new dialog instance (with a web dispatcher)?
    I can imagine that when you create a new server node you also have to increase the heap and max therad of the dispatcher. Is there any upper limit of the heap size of the dispatcher node ?

    Rasmus , I think you laid out a real good scenario for every one to contribute
    I may be very late but just updating this forum for benefit of everyone who visits this.
    In addition to all the points above one must also consider following things if one decides to add more server nodes to one dispatcher
    1.Garbage collection time
    2.Dispatcher would keep on sending request to node S2 if it is not completely bad and there by impacting all the servernode       so  you might end up restartiing the entire cluster.
    3,Debugging also becomes diffculy as you are not sure on which server node you are within the cluster.
    4.If you have something like F5 which does hear beat monitoring even one server node goes bad F5 will not report anything.
    So in my view one server node per dispatcher is an ideal configuration.
    Over All Dispatcher does not consume more resouces (Disk Space + CPU + memory ) at the same time it will give you maintenance flexibility.
    Nothing is right or wrong ,all these things are based on how your infrastructure set up is.
    Cheers !!
    Manish Jain

  • How many enterprise projects we can create in a single project web app site in project server 2013 enterprise?

    I have MS SharePoint 2013 Enterprise and MS Project Server enterprise installed in the same server,
    I have created project web app site 
    can anyone tell me that how many enterprise projects I can create in a single Project web app site
    what is the recommended number of enterprise project per project web app

    As I remember each project site is a sub site in a project Web app site collection.  That means you can have a maximum of 250,000 project sites before you run out of space in the site collection.  That's the boundary for sub sites in a single
    site collection for SharePoint 2013.  Project server doesn't have a specific limit.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • How many IDE drives & CDrom can be installed with SATA drives??

    How many IDE drives & CDrom can be installed with SATA drives??
    i have 2 IDE hard disks & 2 CDROM drives: can install SATA hard disk added to these drives or do i have to remove some???
    & if it can be added, can i install 2 SATA drives???
    THX in advance

    The 3 versions of this board that are available are:
    875P Neo-FISR (PCB 2.0)
    875P Neo-LSR (PCB 1.0)
    875P Neo-FIS2R (PCB 1.0)
    All of these boards will have the following ports provider by the chipsets ICH5R south bridge.
    2 x SATA (Supporting 2 SATA HDD drives)
    2 x PATA (Supporting 4 IDE devices)
    All 6 of these can be used at the same time (provided you are using win XP or 2K) you just need to make sure yor BIOS is set right.
    ->INTEGRATED PERIPHERALS
    ->ON-CHIP IDE CONFIG
    ATA CONFIG: S-ATA ONLY or P-ATA ONLY
    S-ATA/P-ATA KEEP ENABLED: YES
    OPERATE MODE:
    If you set to "legacy mode" S-ATA are set to channel 1 and 2 and P-ATA to channel 3 and 4. If you set to "native mode" P-ATA are channel 1 and 2 and S-ATA 3 and 4. You can only use the raid functionfon SATA in native mode.
    If you have the 875P Neo-FIS2R (PCB 1.0) you will also have the following ports provided by the Promise PDC20378 PCI controller:
    2 x SATA (Supporting 2 SATA HDD drives)
    1 x PATA (Supporting 1 Master IDE HDD drive)
    The PATA port is limited to 1 Master HDD by the lite BIOS. This can in theory be upgraded to the full BIOS supporting a master and a slave, but this may obviously void your warranty.
    So the answer to your origional question is:
    2 x SATA HDDs and 4 x IDE HDD/CDROM if you have 875P Neo-FISR (PCB 2.0) or 875P Neo-LSR (PCB 1.0)
    or
    4 x SATA HDDs, 1 x IDE HDD (2 if you modify the BIOS) and 4 x IDE HDD/CDROM if you have 875P Neo-FIS2R (PCB 1.0)

  • How many days old we can see SQL Executions OEM 11g

    one of my technical guy asked me 5 days back sql session information how many days old we can see SQL Executions OEM 11g ..?

    Metric Historical Information will be saved for a year by default.
    Check http://download.oracle.com/docs/cd/E11857_01/em.111/e16790/repository.htm#i1030660
    SQL Statement execution might be analyzed from AWR snapshots using ADDM.
    You can keep AWR Snapshots as long as you like.
    Bare in mind that this will occupy database space.
    From the Database Home page select the Server tab and select the Automatic Workload Repository link to set Snapshot Retention
    Regards
    Rob
    http://oemgc.wordpress.com

  • Is there a restriction on how many simultaneous wireless iPads can watch movies from one iTunes account or AppleTV generation 2 or later?

    Is there a restriction on how many simultaneous wireless iPads can watch movies from one iTunes account or AppleTV generation 2 or later?

    Welcome to the Apple Community.
    I find it hard to believe that this information isn't clearly available somewhere, but it isn't and I don't think I've seen anyone here who is 100% sure. However, I believe you can have up to 10 associated devices, which include authorised computers (of which you can have up to 5), I suspect the Apple TV might become a temporary associated device while it's in use, but I'm not entirely sure myself.

  • How many numbers  of records can be uploaded  using BDC  at a time

    dear friends,
                      i want to know that how many numbers  of records can be uploaded using BDC  at a time from legacy system(database).

    no resticsation.
    large value of data  upload.

  • How many Multi-Touch points can an iPhone/iPod touch have at the same time?

    How many Multi-Touch points can an iPhone/iPod touch/iPad have at the same time?
    I am curious as IIRC (but forgot where the article is on the Internet),
    if a touch surface is wanted to be able to detect more than 1 touch point at the same time,
    then that touch surface needs adding 1 more conductive(?) layer.
    (e.g. 2 points -> 2 layers, and so on)
    So I wonder how many these layers are on the iPhone / iPod touch / iPad or even the trackpad on every MacBook (Pro).
    (correct me if I'm wrong)
    Just curious, thanks in advance!

    I believe it can only support 2. This article explains how the touch screen works but doesn't explicitly say how many points is supports.
    http://electronics.howstuffworks.com/iphone1.htm

  • Is there any limit on how many records a cursor can hold?

    Hi Everyone,
    This is Amit here. I want to know whether there is any limit on how many records a cursor can hold.
    I have a program in which i am creating a cursor and passing it to another procedure as an input parameter. But the count of cursor query is more than 15 Lakhs. The program is running forever.
    Just wanted to know whether the huge data is the problem.
    Thanks ....
    Regards,
    Amit

    user13079404 wrote:
    Just wanted to know whether the huge data is the problem.What do you think? How long does your code typically need to wait for the data to leave the magnetic platter of the harddisk, travel across wires and into the memory buffer of your application - for a single row?
    Now multiply that waiting for I/O time with a million - for a million rows. Or by a billion, for a billion rows.
    Is "+huge data+" a problem? Not really - it simple needs more work to get that amount of data from disk. More work means slower performance. It is that simple.
    Which is why the row-by-row approach used by many developers is wrong. You do not pull a million rows from disk and process it in PL/SQL or Java or .Net. Heck, you do not even pull 10,000 rows like that.
    The correct approach is to think data sets and use SQL to process that for you - and only return the bare minimum of data to the application layer. Maximize SQL. Minimize PL/SQL and Java and .Net.

  • How many attribute views you can be used in analytical view

    how many attribute views you can be used in analytical view

    Any attribute declared at component level in "Attributes" tab can be used in any methods of the view
    WD_COMP_CONTROLLER->attribute
    Thanks
    Bhanu

  • How many line item dimensions can a fact table have?

    Hi,
    How many line item dimensions can a fact table have? Is it tht Max of 16 dimensions(13+3) .Does the 16 dimensions include line items dimensions as well .
    Pls reply.
    Thanks
    Praveen

    It includes all dimensios, including line item dimensions.
    If you have line item dimension, pl note you cant assign any other characteristic to that dimension.
    Ravi Thothadri

  • By default how many plan types one can create in Hyperion planning applicat

    By default how many plan types one can create in Hyperion planning application?

    Hi,
    By Default,We can create 3 plan types in Hyperion planning application.

Maybe you are looking for

  • Retrieve LDAP data in Chunks using DBMS_LDAP

    Need help in getting the LDAP data in Chunks using the DBMS_LDAP. The reason being i have over 8000 records in the AD and it is configured that i cannot retrieve more than 1000 at a stretch. The AD administrator had given me an option of fetching it

  • Status of Stock on any given date/Complex

    Hi Experts, I want to display the status of stock(Like MMBE) on any given date. Actually i am trying to capture the MSEG data and categorize based on the movement types/stock status/special stock indicator and trying to calculate the status of stock

  • I want to change the default setting from "working offline" to "working online"

    Every time I start Firefox for going to internet I have to uncheck the "working offline" setting. How can I make Firefox start in "working online" setting?

  • Adjusting paper sizes

    I just bought a hp 510 plotter printer 42 inch I have 36inch paper the tech that installed the printer did not adjust paper size  !! I have tried to do this my self but I cant get it right!!therfore  I keep missing the last 2 inches on these blueprin

  • Trouble Adding Pictures

    I began working on a project several days ago and after adding about ten pictures, imovie will no longer allow me to add any video or pictures to the project. No message pops up... it simply is not added and the undo add picture option is available u