IN AA Message no. AB059

Hello All,
We have not dont Fiscal year change for our company code for 2010, still we are in 2009 dec.
While trying to execute report S_ALR_87011964 or any reports related to assets, we get a msg saying fiscal year not yet made for company code XXXX.
Though the report date is for 2009, still we get this msg.
Please advise.
Otherwise I need to convert this error msg as warning, please tell me from which tcode I can do this.
thanks.
Sunil.

Hi,
You must open the new FY in AA with AJRW.
AJRW is an technical step in order to generate the asset periodic values for the new FY in the system.
By doing this there is no harm to the asset data.
If your current system date falls in new FY, you must run AJRW for your CC.
Please make an effort to do some search before posting any threads, since this question has been asked many many times during last one week
Thanks,
Srinu

Similar Messages

  • Error in asset fiscal year change

    Hi,
    Experts,
    Here i have an issue regarding asset fiscal year close,  Here system gone live in nov 2006 after that they are not perform period end  and year end activities.  right know they came out to do all period end activities and year end activities and i did all closing activities up to 2007-2008. here every thing is fine but in asset side when they are executing asset report through this S_ALR_87011967    here they got error message Fiscal year change not yet made for company code The relevant
    error message No. AB059 Kindly verify this and tell me what to do this.
    Thanks
    Gopi

    You can run only reports when the current fiscalyear is open
    TC AJRW - Fiscal Year Change
    You can have only 2 fiscal years open (old and new fiscal year).
    It is later still possible to reopen old fiscal years and make changes

  • AR01 / AR02 Error (Message no. AB059): [Year Dependent Fisc Yr]

    Dear Experts,
    We have Year Dependent (Calendar Year i.e; Jan to Dec.). We have +1 Year Shift concept, therefore our current fiscal year is 2012 and reporting year is 2011.
    We have already run :
    AJRW (Fiscal Year Change) for 2010 and 2011 for desired Company Code.
    AJAB (Year End Closing Asset Accounting) for 2010 and 2011 for desired Company Code.
    I can see Closed Year 2011 in OAAQ for desired Company Code.
    QUERY:
    When we try to see Asset details through AR01 or AR02 below error is shown (for any report date and year):
    Fiscal year change not yet made for company code XXXX
        Message no. AB059
    Diagnosis
        You have not yet carried out a fiscal year change for company code XXXX,
        although the current system date is in the new fiscal year.
    Procedure
        Carry out the fiscal year change for company code XXXX.
        Proceed
    What we are missing? Please help ....
    - Nilesh

    Hi,
    please see if the following threat is helpful:
    Asset Related Report
    Basically, it is a really important error message and you should follow the note and close the fiscal year (0485442).
    If your business case in only the reporting, I can offer you the following Workaround. Bear in mind that this is a modification and it is not supported by SAP.
    Please only temporary!
    In the include DBADAF05 yo can change the line
    MESSAGE E059(AB) WITH T093C-BUKRS.
    as follows:
    MESSAGE E059(AB) WITH T093C-BUKRS. "deactivated
    or in
    MESSAGE S059(AB) WITH T093C-BUKRS. "status
    or in
    MESSAGE I059(AB) WITH T093C-BUKRS. "Info - Popup
    Note 1433686 could be relevant for this case.
    regards Bernhard

  • Fiscal year change not yet made error message

    We have done all of the year-end tasks including AJRW and have been using asset reports since January. All of a sudden, today, we cannot get any asset reports for one of our 70+ company codes. Table ANLC looks like it has the appropriate entries for 2009 and 2010. OAAQ shows 2008 last closed. What could have changed to start getting Message no. AB059?

    Hi,
    Do like below.
    First do AJRW for FY 2009 for all of your company codes.
    And once the above finished, run AJRW again for FY 2010 to all company codes.
    Run both in background mode.
    This will resolve your issue.
    Thanks,
    Srinu

  • SAP message Log

    Does SAP maintain log of all the messages displayed on screen using MESSAGE statement?
    We are investigating a problem and want to see the messages displayed by SAP during the time when problem occured.

    We have custom development for picking and confirmation. Last week we found that in some deliveries there is difference in delivered quantity and packed quantity.
    Custom development is calling sap-standard FMs. Problem occurs randomly, roughly 10 deliveries in a week has this problem.
    We are still trying to investigate the reason that is causing the problem.
    Custom program does display the message to user if FM raise any message. We asked user of they are getting any message while picking, and if they are ignoring it.
    They just confirmed that they are getting message 'Packing Not Possible Since there is no Quantity to be Packed' and they did ignored this.

  • Windows Vista: Ipod Error Message, no longer read by PCs

    Hello,
    I have a 5th generation black ipod video with 30GB of memory.
    The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
    Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
    I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
    What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
    Any advice would be greatly appreciated! Thanks!

    you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

  • Error message into a Variable.

    Dear users,
    I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
    My requirement is like this:
    I have a message class in which I want to define a text 'Employee number & not found'.
    I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
    So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
    lv_text = e0xx(messageclass) USING '1234'   which stores the text 'Employee number 1234 not found' in lv_text.
    How would I acheive it??
    Thanks, V!

    Try tis way
    message e999(00) with i_emp-empno into lv_text.
    press f1 in message will provide you more details
    a®

  • Cannot sync, error message "could not be read" for an iPod no longer in use

    I have two problems. I upgraded iTunes to 7.2 and the very next morning my iPod died. It is completely unresponsive. Maybe it's coincidental. So I bought a new 80 gig iPod and gave it a different name than the old dead iPod. Now when I try to sync the new iPod, it goes for about 10 minutes, then it fails with this message:
    Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
    It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer! Somehow, minutes into syncing, iTunes has forgotten which iPod it is looking at. I have seen the article about the "cannont be read" message and it is not relevant. I need to make iTunes forget about the old dead iPod so it will stop looking for it. I've tried removing the files from "Documents and Settings" but iTunes still remembers the old unit. Where else does it store information? Any recommendations?
      Windows XP  

    Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
    It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer!
    Okay, that can sometimes be caused by a Windows drive letter confusion. For troubleshooting advice on that possibility, see the following document:
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

  • Error message: "playlists selected for updating no longer exist"

    I tried to update my ipod nano and I guess I had deleted a playlist, but since then, I have not been able to update. Every time I try, I get the following message:
    "Cannot be updated because all of the playlists selected for updating no longer exist."
    I haven't been able to highlight which playlists are selected to begin with.
    I read through the manual and thought that maybe rebooting the whole system might work. So I deleted Itunes from my computer and re-installed.
    Then I tried re-setting my ipod. So now I have nothing on my ipod.
    I also deleted everything from my library, thinking it might help to start from scratch. Nothing has worked.
    How do I "select" and "unselect" playlists so I can get up and running again?

    Here you go.
    http://discussions.apple.com/thread.jspa?messageID=607312&#607312

  • IPod seen by windows, not by iTunes+ weird error message

    I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
    and why is there no email adress from apple for service qustions? 10x

    I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
    Did you read the document i linked you to? here's another link to it:
    Putting iPod into Disk Mode
    whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
    ... never mind ... i guess you've fixed it anyway ...

  • Error message iPod cannot update b/c all of the playlists no longer exist

    Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
    PC   Windows XP  

    hiya!
    And my playlists are still on the left side in my iTunes. They do exist.
    let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
    is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
    love, b

  • Windows 7 displays error message when exiting +cursor issue

    Two issues here. CS5 Phoshop on Wind 7 64 bit.
    Physical processor count: 8
    Processor speed: 3073 MHz
    Built-in memory: 12279 MB
    Free memory: 9577 MB
    Memory available to Photoshop: 10934 MB
    Memory used by Photoshop: 80 %
    Image tile size: 128K
    First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
    The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
    Any help will be gratefully accepted.
    Doug

    function(){return A.apply(null,[this].concat($A(arguments)))}
    doug87510 wrote:
    The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
    Well, that issue is simply a matter of hitting the Caps Lock key.  When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair.  That's a feature, not a bug.
    Glad to hear the 11.1 drivers are out.  I will download them and try them now myself.
    Regarding "Adobe QT" crashing...  QT brings to mind QuickTime, though that is Apple, not Adobe.  Do you have Apple QuickTime installed?
    Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
    -Noel

  • Windows Blue Screen Error Message Appears As Soon As IPod Connected

    Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

    Hi Mike thank you for replying,
    I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
    I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
    If you can help me out or suggest where to search it would be much appreciated.
    Thx

  • IPod Error Message: "The disk could not be read from or written to."

    Hello!
    I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
    I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
    Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
    Any help would be greatly appreciated. Thank you in advance. ^_^
    PowerBook G4   Mac OS X (10.4.3)   15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

    Okay I went thru that entire list and here's what I got...
    (1) My OS is XP and is running fine.
    (2) I've updated my windows
    (3) I don't know of any software that might be interfering.
    (4) There are no damaged files.
    (5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
    (6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
    (7) The USB cord is firmly connected into my USB port and my iPod
    (8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
    (9) I will try another USB cord to see if that works.
    Is there anything else that I can do? Can Apple fix this?
    Please let me know.

  • IPod Touch will no longer sync...error message.

    For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone? 

    What is the exact wording of the error message?

Maybe you are looking for