In Acrobat Professional 8, what is the best way to insert/combine multiple pdf's together in a large

In Acrobat Professional 8, what is the best way to insert/combine multiple pdf's together in a large volume?
We have 300 pdf reports and need to insert a 2 page cover page infront of each report. Not sure if Batch processing is best???
Thanks for any tips.

Probably each cover page is different too. I would probably just bite the bullet and do each individually. I would create the 2 cover pages in WORD or other word processor and print to cover.pdf. Then open a PDF and Pages>Insert Pages or the cover.pdf to the front of the open PDF and save as to the current PDF. Then repeat 299 times. Each time you would make the appropriate change to the DOC file and print a new cover.pdf file (you might want to turn off open in Acrobat for this processing in the printer properties to save time). Probably a good idea to keep a list of the files to check off what has been done (you can generate a list in DOS by Start>cmd, change the directory to your location [cd path], and do "dir >>list.txt". That will give you a list to use.). There may be an easier way, but by the time you get it figured out you might be done this way.

Similar Messages

  • What is the best way of insertion using structured or binary type in oracle

    what is the best way of insertion using structured or binary type in oracle xml db 11g database

    SQL*Loader.

  • What is the best way to insert massive data into an existing excel file?

    dear gurus,
    i am wondering that what is the best way to insert massive data into an existing excel file, more performance perspective.
    the file is read from BDS , and we want to insert data into it .
    the way i can think of is
    1. OLE AUTOMATION
       i think performance will be a big problem
    2. Office integration
        i am not sure it's facing the same performance issue ?
    3 . XXL_SIMPLE_API/FULL_API
        I am not sure whether they can insert data into an existing excel file?
    could you please give me some advices?
    br.
    jun

    Hi,
    If you want to APPEND data( add data to an existing excel file) from SAP, then use GUI_DOWNLOAD fm with APPEND = 'X' paramter.
    Best regards,
    Prashant

  • What's the best way to load balance multiple protocols on one vserver?

    Hi,
    We have a CSM blade on a 6513, in bridge mode. I'm just wondering what is the best way to serve HTTP and HTTPS (or any two or more ports) from the same group of servers. As I see it, we have two options:
    1. Don't set a port on the vserver, so it is load balancing "any" or "tcp". This is easy but I want to be sure there isn't a downside to this, other than the obvious security issue.
    2. Create multiple vservers and point them at the same serverfarm. I tried this and I got some odd results with the health checks.
    Any ideas? Thanks a lot.

    you listed the only 2 options available.
    The advantage of solution #2 is that you can apply specific config for each protocol ie: for HTTP you can turn 'persistent rebalance' if needed.
    If you want to use specific probes [not icmp], it is also a good practice to create a different serverfarm for each protocol.
    Like this, if the HTTP service goes down but not the server, you can still have other protocols loadbalanced.
    Regards,
    Gilles.
    Thanks for rating this answer.

  • What is the best way to work on multiple songs in one long recording?

    I often record the local open-mic nights and generally just leave logic recording the entire night so i end up with lots of songs/bands in one big recording.
    What is the best way to work with such a recording? Is there a better way than just using the event marker when a new band plays?
    Also once i get home id like to save each band to a separate project but i cant seem to find an easy way to do this?
    Obviously each band needs a different mix hence needing separate projects? or am i missing a much better work method?
    any help greatly appreciated!
    many thanks

    As for your second point, just do a "save as" new file name and cut and erase any unwanted audio from the arrange window (ie. the bits that aren't in the song you want separate). You can do this for as many songs as there are and create a different mix for each one no problem. You multiple select and drag all the regions to the beginning of the arrange window (make sure you do them at the same time so's they don't go out of synch. All the separate songs and mixes can be saved in the same project folder as the original audio files are stored in (the folder structure should be there already if you started a new logic project, so no need to change that.
    I would think using markers so you know where each song begins during the show, and the above method after, would be a very good way of organizing things. You may want to stop actually recording between bands too though I expect you are already doing this.
    Its really as easy as that. Sometimes things just are.

  • What is the best way to set up multiple Apple devices ?

    Lime many of us here I have quite a few apple devices and I just wondered whet the best way to set them up with itunes / Apple
    my Apple gear:
    Mac mini 2.53 with Mountain Lion
    Mac Mini 1.6 duo Snow Leopard
    Iphone 5c (mine) running 8
    Iphone 5c (wifes) running 8
    iPad 2 (old)  64 GB  running 8
    iPad Mini 2 retina  32 GB running 7
    g3 iMac (running Tiger) Juke box (semi retired ;-) now)
    At the moment all devices (apart from new Mac mini 2 and the old G3) are set up under my Apple ID ... (1 Apple ID for all devices) ... obviously this has problems : my wife downloads an App it will appear on my phone; we have had to disable some of the messaging systems as at one point my wife was getting my messages et ... is there a better way to do this? 

    cosmiconion wrote:
    one drawback of same Apple ID for store is that what she downloads will automatically appear on all devices
    Do you mean the visibility of the purchase in the App Store (under purchases) or the installation of the app automatically on the other devices?
    In the App Store on the device (under iOS 8 at least on the iPad, I couldn't get it to work on my iPhone 5 under iOS 8), you can hide purchases...just swipe it to the left in the Purchased list. You can then unhide the hidden purchase(s) if desired by using iTunes on the PC/Mac under your iTunes account.
    Auto App updates (Automatic Downloads) can be controlled under: Settings/iTunes & App Store, scroll down to Automatic Downloads and disable those that you do not want.

  • What is the best way to handle executing multiple packages from the Agent?

    I have several packages that have to be executed in sequence. I thought the best way to do that was by creating a job for each package then have a master job that executes the other packages. In my master job,  I'm using sp_start_job to call the other
    jobs. The problem is, the master job moves from step to step without waiting for the child jobs to finish; basically they all execute together.
    That is the way I've seen it done in other places so I feel like I'm doing something wrong. In the alternative, I know it's possible to set the individual steps up so they execute the packages directly without calling an external job. I prefer the first
    way though.
    Which way should I jump on this?

    So basically what I'm hearing is just call the packages in a mulit step job. Creating a master package and calling child packages sounds a little crazy and unscaleable especially considering that the packages have master child relationships
    within themselves. It's SSIS Package Inception. 
    Sorry whats the issue with that?
    Provided you're setting the package sequence correctly based on your dependency it will work fine as loop gets iterated based on how you set the package list.
    What we have is a audit and control mechanism which even have details on the dependency so based dependency set only the packages gets ordered and listed for the loop to iterate through and executing. Also tomorrow if a new package comes into being, all
    it takes for us is to tweak the audit table to add a new entry for the package and set the dependency and it will continue to work fine including the new package without touching the existing job for any modification whatsoever.
    Another advantage of this table is we also capture audit details in it like date when package got last executed, its status of execution,rows processed (insert,modified, deleted) etc which can be used for easy monitoring of the data processing tasks as well.
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • What is the best way to switch between multiple image buffers? AND How to synchronize saves?

    Hello,
    I'm trying to flip-flop between two buffers and wondering the best possible solution for this.  I'd like to acquire an image in one buffer, send that off to be processed, and then while that's being processed acquire a second image.  Right now I have a "Create IMAQ vi" in a for loop and have it creating 10 image locations.  I'm using a non-NI framegrabber (shame I know) which makes things a bit more difficult to replicate.  I have two while loops.  One while loop currently grabs images from the framegrabber and places in the 10 different locations.  The other while loop currently holds a case structure that does the processing.  I have created a local variable that holds all of the image locations and reads those to be processed.  I don't know if this is actually making things faster or if it's better to just make one image location.
    I have two images attached.  One image is the Grab While loop.  Since I have an array of locations, I have to use a for loop and index each one out to my display. I then have a shift register to carry the image location info over to the next iteration of the while loop.
    The second attachment is the bulk of the main while loop.  It shows what happens to the image while it's being fully processed in the left case structure.  I know it does not look like much but one of the cases (which is called by Boolean Image FFT) is a subVI that does most of the processing.  I believe that is what really slows it down because of how that program is written. 
    The right case structure shows my saving mechanism.  I have two file paths. One to save the image and the other to save the processed image.  I have a sequence to make sure they save at the same time once it gets to that point. 
    The problem though is the following:
    In the grabwhileloop.png, you can see that I have a timing to see how fast the images are being acquired.  This value is approximately 60 fps (which is the rate of the Basler camera).  There is a similar set up in the main loop case structure. This processes very slowly and is approximately 1.04 fps.  Which would mean that the image I turn into an array in the left case structure in the main while loop image is more than likely different than the image I'm trying to save off in the right case structure since the grab is occurring at the same time.  I'd like to have the processed image to save alongside the image I am processing.
    Sorry for the big bulk of text.  This code has come a long way as it is.  If you have any suggestions on making it faster or more efficient please feel free to chime in.
    Thanks,
    Rob
    Attachments:
    GrabWhileLoop.png ‏34 KB
    MainWhileLoop.png ‏68 KB

    Thanks for the comment.  I have looked into the producer/consumer architecture, but to be honest, I'm not quite sure how everything will work while doing that. I have seen the example codes, and I have thought about implementing (or at least attempting to) but I'm still unconvinced that it will run that much more efficiently.  There is other setup outside of the images that had to be done outside of either while loop. Also, I don't know where I would put both loops.
    Last time, I attempted to put the grab while loop inside of the state machine.  Things got chopped because it took so long to go through the main while loop's "acquisition" state (which is really the processing state).  I needed both to simultaneously run.  The grab reset every time it went to the "grab" state which is not what I wanted.  The only way I can thing to have combatted this was to combine the grab and acquisition in the same state.  If that were to happen, I'd take out the for loop and grab one image at a time.  However, that would still probably make things even slower than they already are.
    In terms of the doing something before an image is assigned in for loop, I don't need that pixel sum value to refresh too quickly.  As it is already, the main while loop is slow enough as it is, so I am more afraid that everything will run too slowly the more I do.  I know where the bottleneck is in my code, but I can't really see a way to "even out the flow".  Even if I moved to the other architecture, I feel it'd take the same amount of time that it does already.
    From my debugging, the Image local variable in the main while loop seems to refresh as quickly as the grab while loop spits it out.  Granted once the main while loop finally completes, main images have gone by.  This is what has to be though because it just take up so much processing power to run through the main while loop state.
    As a side note, does labview have an issue with acquiring images in real-time that you have heard of?  I ask because when I run the code, there is a solid white line that I'm supposed to see in my display.  Every time things either time out or something, the line moves which is not supposed to happen.  The line also moves every time I place my mouse cursor in the display or if I spin the mouse wheel to scroll.  If I don't do either of those things, it'll eventually move on its own.

  • What is the best way to set up multiple devices in the same household?

    Our family has a bunch of devices (phones,pads,pods) all set up under the same appleID.  The idea was to be able to share iTunes content among devices.  The problem is that there is personalized data merging between devices (address book, apps, etc).  Is there a way to set up multiple devices under the same account while maintaining their own identity so that Each user can have their own apps, addresses, etc without having to sift through everyone else's stuff?

    Continue to share your iTunes ID, but use different IDs for other services such as FaceTime, iMessage and iCloud.  (When you share the same iCloud account across multiple devices, any synced data is merged and the merged list appears on all devices sharing the account.)
    To change the ID For:
    iMessage, go to Settings>Messages>Send & Receive (Receive At in iOS 5), tap the ID sign out, sign back in using the other ID.
    FaceTime, do the same thing in Settings>FaceTime.
    iCloud, you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account.  Before deleting the account, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll or you will lose them.  To do this, open the photo stream album in the thumbnail view, tap Edit, tap all the photos you want to save, tap Share, then tap Save to Camera Roll.  Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. When prompted about what to do with the iCloud data, be sure to select Keep On [iDevice].  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.  Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want in each account (such as deleting the other person's contacts from your account, and vice versa).
    This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/.

  • What is the best way to host an interactive PDF in a website?

    I am making an interactive fashion magazine with DPS and I need it to be put into a website, but haven't found a simple solution yet. I am not very well versed with HTML, so something without too much of that would be good.
    What type of website would be best (wordpress, wix etc.) and how do I do it please!?

    e777y, Those are incompatible formats. While you might get the content and some of the interactivity there is no way to duplicate the DPS format in PDF. If you have a Pro or Enterprise account you can look at the DPS web viewer.
    Trung.vu, please start a new thread...you are NOT having the same issue.

  • What's the best way to insert/update thousands records in multiple tables

    Can anyone give an example of how to insert/update thousands records in multiple tables on performance wise? or what should I do to improve the performance?
    Thanks
    jim

    You can see a set of sample applications in various scenarious available at
    http://otn.oracle.com/sample_code/tech/java/sqlj_jdbc/content.html

  • What is the best way to differentiate a flatten pdf file and a mult-layers (live) file

    Hi All,
    I am using Adobe Acrobat 9.3.
    I have over 10,000 pdf files saved in the same directory. Some of them have been flatten while some of them are still live.
    All the files need to be flatten and I need to identify all the live files.
    Is there any way I can identify them without going through one by one?
    Is there any program I can use?
    Appreciate for your help.
    Thanks,
    Chris Wong

    You can use JavaScript to tell if there are any layers in a document. You could use it in a batch sequence that checks all of the files in a directory and print the filename to the JavaScript console for each file that has layers.
    For more information, see:
    http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.482.html
    http://acrobatusers.com/tutorials/2006/create_use_layers
    You can also use JavaScript to run a Preflight profile that yo've set up to flatten layers. For more information, see:
    http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.510.html

  • What's the best way to insert a long raw using OracleXSU12?

    I am currently reading a string from a document file and dump the content in a field in a row in a rowset in the xml file. I am just wondering if there is a better way to do this using the name of the text file instead. Thanks.
    null

    (1) you can't insert a sheet in Pages. Only tables !
    (2) before pasting your table in Pages, you may resize it so that it may fit in a page.
    (3) the users which took time to look in Pages User Guide are aware of a feature described as : Linking Text Boxes.
    It's a good answer to your problem.
    In a Word Processor document, create a text box and paste your table in the new tex box.
    At the bottom of the box you will see a small square with a symbol plus. It's a flag warning you  that the box contents is too large for the box.
    No problem, insert a page break to force the opening of a new page then read carefully the user guide :
    Applying what I highlighted, you will create a new box linked to the first one so that your table will flow in it.
    If it's not sufficient, you may link a third box …
    More, we are allowed to rotate the text boxes so you may edit them a way allowing them to host your landscape table.
    From my user's point of view, it's absolutely intuitive.
    Yvan KOENIG (VALLAURIS, France) dimanche 26 juin 2011 21:29:56
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • What's the best way to insert a numbers sheet into pages?

    I have some spreadsheets in numbers that I want to insert in pages...somehow it's not so intuitive.
    First of all when I paste them in a pages text box...a part of the sheets fall off the botom of the page
    Even a bigger problem...The should be in landscape...while all my text is in portrait...
    Anybody?
    Thx.

    (1) you can't insert a sheet in Pages. Only tables !
    (2) before pasting your table in Pages, you may resize it so that it may fit in a page.
    (3) the users which took time to look in Pages User Guide are aware of a feature described as : Linking Text Boxes.
    It's a good answer to your problem.
    In a Word Processor document, create a text box and paste your table in the new tex box.
    At the bottom of the box you will see a small square with a symbol plus. It's a flag warning you  that the box contents is too large for the box.
    No problem, insert a page break to force the opening of a new page then read carefully the user guide :
    Applying what I highlighted, you will create a new box linked to the first one so that your table will flow in it.
    If it's not sufficient, you may link a third box …
    More, we are allowed to rotate the text boxes so you may edit them a way allowing them to host your landscape table.
    From my user's point of view, it's absolutely intuitive.
    Yvan KOENIG (VALLAURIS, France) dimanche 26 juin 2011 21:29:56
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • What is the best way to Insert BLOB in DB?

    Hi,
    We are having a Table containing BLOB datatype & trying to populate it using JDBC. But simple insert is not allowing us to insert the data into table. As the alternative we used to firstly insert a empty_blob & later on update it using FOR UPDATE query resultset. This update operation is quite costly for our application & thus resulting in the drop of performance. Kindly suggest a better way to do the operation in a less costly & standard way.
    Thanks in advance.

    Ciao Giovanni,
    I thank you for your reply. We are already using JDBC driver version 10.2. Please refer to the extract from the driver jar file (OJDBC14.jar):
    Created-By: 1.4.2_08 (Sun Microsystems Inc.)
    Implementation-Title: ojdbc14.jar
    Specification-Vendor: Oracle Corporation
    Specification-Version: Oracle JDBC Driver version - "10.2.0.1.0"
    Implementation-Version: Oracle JDBC Driver version - "10.2.0.1.0"
    Implementation-Vendor: Oracle Corporation
    Implementation-Time: Wed Jun 22 11:19:45 2005
    The insertion is done in two steps:
    1.     First , enter an empty blob (Refer to the following prepared statements in Java):
    sFirst.setString(1, id);
    sFirst.setInt(2, 0);
    sFirst.setString(3, pid);
    sFirst.setBlob(4, BLOB.getEmptyBLOB());
    sFirst.execute();
    2.     Second, do a select for update
    Please help.
    Regards.

Maybe you are looking for