In Acrobat X Pro, fields are not showing up when previewing or creating Reader-enabled PDF

I have a form with many fields (217 in all). When I click "Preview" within Form Editing, I only see a small subset of the fields. If I save as a user-enabled form, that form only shows the same fields. Why aren't all of the fields showing up? Thanks!

Never mind. I believe I figured it out. I thought that setting the form field to "Invisible" just affected whether the box would be visible to the end-user, not whether it would be fillable at all. Now that I set all of the fields as "Visible but doesn't print" all of the fields show up.

Similar Messages

The names of my contacts are not showing up when I receive text messages

The names of my contacts are not showing up when I receive text messages, only the number is showing up. How can I fix this?

This is a HUGE iOS bug.. Following a tip from another poster, I was able to fix the issue (temporarily).
This worked for me on Verizon.
I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
The next text I got displayed the number correctly!.. Until I rebooted, that is.
PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

Our illustrator files are not showing up when uploaded to creative cloud.

Our illustrator files are not showing up when uploaded to creative cloud. They are visible sometimes when we turn on and off the layers. Please help thanks.

If you feel that you have enough evidence of the symptoms, use the feedback at http://www.apple.com/feedback/itunesapp.html to let Apple know. The "feedback type" of "bug report" has been removed from the iTunes feedback, so I suggest you use use "Other".
You will not receive any feedback from them, but they do read the submissions and act upon them. It can take a while, and more than one iTunes update before the issue is resolved.

TS4337 I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

On the iPad tap Settings > iCloud
Toggle Documents & Data off then back on then restart your iPad.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
On the iMac open System Preferences > iCloud
Deselect the box next to Documents & Data then reselect it then restart your iMac.

Pdf form created in Acrobat 9 Pro Extended does not function properly when viewed by Reader

Hello all-
I have created a form in Acrobat 9 Pro Extended and have an issue because when others view the form in Adobe Reader some of the functions do not work- such as the attach a file button I created, or the save, print buttons (all are execute a menu item). These work on my Acrobat 9 Pro Extended but not on Reader.
I have tried saving many different versions- with security (password) and made sure to allow printing and commenting, editing, digital signatures etc...
Without any security...
Even tried extending features in Adobe Reader!
The response from others is that it all works, except the ATTACH A FILE button- when they click on it it compresses, but, nothing happens!
I don't know what else to do! (I guess people could just attach things to the e-mail that is generated from the submit button, but worried people might forget at that step once they are past that section on the form and they jump to email to submit).
Help please!
A.

I've already extended the rights and made sure to save to activate that... as well as password protected the docs etc... still nothing...
I am aware that those with Basic Adobe Reader need rights extended to be able to use functions available to Adobe Pro.

Using Screen Exit AMPL0001 in TCode MP02 but fields are not showing.

Hello SAPients!
I created a project, added the enhancement AMPL0001, included some test fields in the subscreen, activated components and project but when I run the transaction where my custom fields are supposed to be shown this is not happening. None of my fields is displaying just the rest of fields that already were there.
I have reviewed what can be the differences between my fields and the others but I don't see any.
What am I missing?
Thanks in advance for your kind help.

Hi Klaus,
Thanks for your reply. Yes, I'm sure, I have reviewed several times. Actuallly I deactivated and reactivated my project a couple of times before you mention, now I did it again and I get the same result.
A couple of questions:
Is it normal that the new fields I add to the subscreen are grayer than the rest of fields?
Is it normal that the status of the subscreen is shown as "Modified/Activated" instead of "Activated"?
Thank you.

Color label folders are not showing up when I do a "find"

On my iMac 10.3 OS my colored folders show up but in my macbook pro 10.4.11 they do not. The images show up colored if I have put a color to them. I have selected "color label" in the "kind" box when I do a find but that doesn't help. I am REALLY used to making my more important folders a certain color so they are easier to spot when I do a "find". Is there a way to do this on a MacBook Pro 10.4.11 OS ?????????
thanks for your time to reply if you can

Yes it does and always has.
Try testing with a new project.
General advice is to always include your version of RoboHelp in posts and where applicable, the output you are creating.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Tool bar gifs are not showing up when the application left idle for long.

Hi,
I have a Java application built with jdk sdk 1.4. This application was earlier on jdk 1.3 and very recently we moved to 1.4.
The problem here is, tool bar gifs don't show up when the application is left idle for long or kept minimized for long. After I minimize and maximize, they show up. Also sometimes few are seen and few are not, and again as I said minimize and maximize, the rest(which were not showing up earlier) turn and therest don't.
What could be the reason. This was not the case in jdk 1.3.
Any help wil be highly appriciated.
Thanx

I have the same issue with 1.4.

HDR Pro 2 does not show up when Photoshop is launched using my mac pro desktop

I recently installed HDR Pro 2 on my mac pro so I can use it relation to my Adobe Cloud Photography Suite, however, when I open Photoshop, HDR Pro 2 is not recognized. Has anyone had the same problems? and if so what did you do to resolve the problem?

"HDR PRO 2"? Isn't that 3rd party software, NIK or something?
NIK has been struggling with a multitude of bugs lately. Check with them to ask for an update.
For next time:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Multiple picklist field not showing up when trying to create a custom repor

I recently have created 4 new fields in CRM, and 3 of the 4 fields can be found to create a report. For some reason, the multiple picklist field has not shown up. Any suggestions or advice on why this is an issue?

Hi,
The multi-select picklist should be available in the Analytics reports not in real-time reports.
Another thing is that there is a delay in metadata refresh in reports, in staging it is about a week, in production it is 1 day, I think. so if you created a multi-select picklist in staging today, it would be available in analytics reports maybe after a week.
Regards,
Ani

There is filled-in info on my form that is not showing up when I print/create pdf

The missing info is just at the end of the form, which is only 5 pages. Everything else I typed in the form is showing. What gives?

I sent the original form.
Alan J. Irvin
Attorney & Registered Civil Mediator
111 North Rangeline Road
Carmel, Indiana 46032
317.580.3000 (Office)
317.514.2390 (Mobile)
www.donahoe-irvin.com
CIRCULAR 230 DISCLOSURE: Except to the extent that this advice concerns the qualification of any qualified plan, to ensure compliance with U.S. Treasury Department Regulations, we are now required to advise you that, unless otherwise expressly indicated, any federal tax advice contained in this communication, including any attachments, is not intended or written by us to be used, and cannot be used, by anyone for the purpose of avoiding federal tax penalties that may be imposed by the federal government or for promoting, marketing or recommending to another party any tax-related matters addressed herein.
CONFIDENTIALITY NOTICE: This E-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution, or use of this E-mail or any attachment is prohibited. If you have received this E-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you.
DONAHOE IRVIN PC

Returned fields are not showing up under stored procedure

First I would like to say I haven't used crystal reports before.
I created a crystal report in VS2008 and under Database fields I pointed to my stored procedure. The parameter fields show up but there are no return fields under the stored procedure. I tested the SP in SQL Management Studio and it works correctly and returns the correct fields. When selecting the SP I tried unselecting "Set to Null Value" for each of the parameters and entered values I knew would return fields and the fields show up under the SP but they are filled with the data from the parameters I used. Which I would expect. If I go back to using null, the fields disappear.
I also had this problem when I updated another Report after adding a new field to be returned from a SP. I fiddled around with it and got it working but not sure how or why it saw the fields when I got it working.
And today I updated a stored procedure to use a string parameter and not an integer parameter. After I updated the SP in VS2008 using the field explorer, the return fields disappear. What am I doing wrong?

Hi Don,
Thanks for the reply. I verified the database multiple times before posting and just verified it again. No luck. Also the SP has only one select.
I found some crystal report cds with 8.5 (the newest I could find), I installed it and tried to use the SP and it gave me the following error:
"There are no return fields in the file". VS2008 does not give this error.
I tried using crystal reports with all the SPs I altered and I get the same error. Most of the changes to the SPs are in the where cause (Changing from field = @field to field IN (@fields) and changing a parameter from an int to a string. Also as a side note, when setting up the data source I am choosing to use nulls. Is this correct? The SPs were all written using SQL string format if that makes any difference.
UPDATE: I tried using discree values that I knew would return values and the return fields show up. They are populated with the expected values but if I use these values all my reports will be the same. As I would expect. So why doesn't it work for NULL values? Maybe my thinking is wrong here but isn't null values used so you can dynamically select values for the parameters at runtime?
Edited by: Kenshinofkin on May 12, 2011 7:01 PM

Input Screen fields are not showing the description

Hi
I have copied a program, generated using SQVI, to a Zprogram, say Ztest, and when I execute this Ztest the description of the fields on selection screen are coming as SP$00001, SP$00002 and so on.
however if I execute the query made using SQVI the field description are the field descriptions.
Can anybody help me resolve this, to show the field description in ZTest also.
Thanks in advance!
-Rahul

Hi khanna_rahul,
since quite a long time (10+ years) I do not use SE38 any longer - partly to avoid such errors as you are confronting now. In SE80 object tree, right mouse click on report, copy, in the popup mark everything, give new name(s) and that was it.
For you it will be easier to just copy and paste between two sessions of report texts. Don't worry, system will ask for transport.
Regards,
Clemens
N.B.: who does have much time and is willing to use it for useless tasks, will stick to SE38 until SAP removes it.

Adobe Pro - Fields do not show saved text

So I created a few Adobe Acorbat forms for my students, when
I tried them out they worked perfectly on my PC but after my students completed and
emailed the forms back to me all I see is an incomplete form.
When I click on the field it shows the text that was inputted but once I click off the text field the inserted text disappears.
Do any of you know how to make it so that the inputted text stays showing after saving it.
What am I doing incorrectly
Thanks!

Forms > Manage Form Data > Export Data
Forms > Manage Form Data > Import Data
Use FDF. If you will be doing this a lot, I'd recomend setting up a custom menu item or toolbar button. For more information, see: http://blogs.adobe.com/pdfdevjunkie/script_to_fix_mac_osx_previewa.html
That particular script is not the best approach, but if you're only dealing with text fields, it's OK. If you are using check boxes, combo boxes, list boxes, or radio buttons, I can provide an alternate script.

Multiple Tooltips are not showing up when hovering over overlapping chart items

Hi!
I ran into a problem which I am unable to fix. Either I am missing something very obvious or this is a bug. I set up a LineChart with two series. One series has multiple overlapping data points, and both series overlap in one point.
Data tips are only getting displayed where the data points of the two different series overlap. Hovering over the overlapping points of a single series does not lead to multiple data tips being displayed. According to Flex SDK docs this should be possible.
Here's a simple example which shows the problem:
<?xml version = "1.0"?>
<s:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"
 xmlns:mx = "library://ns.adobe.com/flex/mx"
 xmlns:s = "library://ns.adobe.com/flex/spark"
 xmlns:local = "*">
 <fx:Script>
 <![CDATA[
 import mx.charts.HitData;
 import mx.collections.ArrayCollection;
 import mx.graphics.SolidColorStroke;
 [Bindable]
 private var values:ArrayCollection = new ArrayCollection([{date: new Date(2010, 10, 15), value:120},
 {date: new Date(2010, 11, 15), value: 60},
 {date: new Date(2011, 0, 15), value: 40},
 {date: new Date(2011, 0, 30), value: 7},
 {date: new Date(2011, 1, 15), value: 30},
 {date: new Date(2011, 1, 18), value: 61},
 {date: new Date(2011, 1, 23), value: 80}]);
 [Bindable]
 private var values2:ArrayCollection = new ArrayCollection([{date: new Date(2010, 10, 15), value:120},
 {date: new Date(2010, 11, 15), value: 200},
 {date: new Date(2011, 0, 15), value: 29},
 {date: new Date(2011, 0, 15, 13, 59, 99), value: 29},
 {date: new Date(2011, 0, 15, 13, 58, 99), value: 29},
 {date: new Date(2011, 0, 15, 13, 57, 99), value: 29.5},
 {date: new Date(2011, 0, 15), value: 29.5},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 30.5},
 {date: new Date(2011, 0, 15), value: 30.5},
 {date: new Date(2011, 0, 15), value: 30.5},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 31},
 {date: new Date(2011, 0, 15), value: 31},
 {date: new Date(2011, 0, 30), value: 70},
 {date: new Date(2011, 1, 15), value: 2},
 {date: new Date(2011, 1, 18), value: 180},
 {date: new Date(2011, 1, 23), value: 80}]);
 [Bindable]
 private var minDate:Date = new Date(2010, 10, 1);
 [Bindable]
 private var maxDate:Date = new Date();
 private function getDataTip(hitData:HitData):String
 return "Tip: Date: " + hitData.item.date + ' Value: ' + hitData.item.value;
 ]]>
 </fx:Script>
 <s:layout>
 <s:VerticalLayout/>
 </s:layout>
 <s:width>100%</s:width>
 <s:height>100%</s:height>
 <s:Panel title = "Chart Test">
 <s:width>100%</s:width>
 <s:height>100%</s:height>
 <s:layout>
 <s:VerticalLayout/>
 </s:layout>
 <mx:PlotChart id = "chart">
 <mx:width>100%</mx:width>
 <mx:height>100%</mx:height>
 
 
 <mx:selectionMode>multiple</mx:selectionMode>
 <mx:dataTipMode>multiple</mx:dataTipMode>
 <mx:showDataTips>true</mx:showDataTips>
 <mx:dataTipFunction>getDataTip</mx:dataTipFunction>
 <mx:horizontalAxis>
 <mx:DateTimeAxis minimum = "{minDate}"
 maximum = "{maxDate}"/>
 </mx:horizontalAxis>
 <mx:series>
 <mx:LineSeries dataProvider = "{values}"
 displayName = "Series 1"
 yField = "value"
 xField = "date"
 interpolateValues = "true"
 lineStroke = "{new SolidColorStroke(0x00FF00, 3, 0.5)}"
 stroke = "{new SolidColorStroke(0x00FF00, 3, 0.5)}"
 itemRenderer = "mx.charts.renderers.CircleItemRenderer"/>
 <mx:LineSeries dataProvider = "{values2}"
 displayName = "Series 2"
 yField = "value"
 xField = "date"
 interpolateValues = "true"
 lineStroke = "{new SolidColorStroke(0xFF0000, 3, 0.5)}"
 stroke = "{new SolidColorStroke(0xFF0000, 3, 0.5)}"
 itemRenderer = "mx.charts.renderers.CircleItemRenderer"/>
 </mx:series>
 </mx:PlotChart>
 </s:Panel>
</s:Application>
Any help is appreciated!
Thanks!

Hi!
I ran into a problem which I am unable to fix. Either I am missing something very obvious or this is a bug. I set up a LineChart with two series. One series has multiple overlapping data points, and both series overlap in one point.
Data tips are only getting displayed where the data points of the two different series overlap. Hovering over the overlapping points of a single series does not lead to multiple data tips being displayed. According to Flex SDK docs this should be possible.
Here's a simple example which shows the problem:
<?xml version = "1.0"?>
<s:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"
 xmlns:mx = "library://ns.adobe.com/flex/mx"
 xmlns:s = "library://ns.adobe.com/flex/spark"
 xmlns:local = "*">
 <fx:Script>
 <![CDATA[
 import mx.charts.HitData;
 import mx.collections.ArrayCollection;
 import mx.graphics.SolidColorStroke;
 [Bindable]
 private var values:ArrayCollection = new ArrayCollection([{date: new Date(2010, 10, 15), value:120},
 {date: new Date(2010, 11, 15), value: 60},
 {date: new Date(2011, 0, 15), value: 40},
 {date: new Date(2011, 0, 30), value: 7},
 {date: new Date(2011, 1, 15), value: 30},
 {date: new Date(2011, 1, 18), value: 61},
 {date: new Date(2011, 1, 23), value: 80}]);
 [Bindable]
 private var values2:ArrayCollection = new ArrayCollection([{date: new Date(2010, 10, 15), value:120},
 {date: new Date(2010, 11, 15), value: 200},
 {date: new Date(2011, 0, 15), value: 29},
 {date: new Date(2011, 0, 15, 13, 59, 99), value: 29},
 {date: new Date(2011, 0, 15, 13, 58, 99), value: 29},
 {date: new Date(2011, 0, 15, 13, 57, 99), value: 29.5},
 {date: new Date(2011, 0, 15), value: 29.5},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 30.5},
 {date: new Date(2011, 0, 15), value: 30.5},
 {date: new Date(2011, 0, 15), value: 30.5},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 31},
 {date: new Date(2011, 0, 15), value: 31},
 {date: new Date(2011, 0, 30), value: 70},
 {date: new Date(2011, 1, 15), value: 2},
 {date: new Date(2011, 1, 18), value: 180},
 {date: new Date(2011, 1, 23), value: 80}]);
 [Bindable]
 private var minDate:Date = new Date(2010, 10, 1);
 [Bindable]
 private var maxDate:Date = new Date();
 private function getDataTip(hitData:HitData):String
 return "Tip: Date: " + hitData.item.date + ' Value: ' + hitData.item.value;
 ]]>
 </fx:Script>
 <s:layout>
 <s:VerticalLayout/>
 </s:layout>
 <s:width>100%</s:width>
 <s:height>100%</s:height>
 <s:Panel title = "Chart Test">
 <s:width>100%</s:width>
 <s:height>100%</s:height>
 <s:layout>
 <s:VerticalLayout/>
 </s:layout>
 <mx:PlotChart id = "chart">
 <mx:width>100%</mx:width>
 <mx:height>100%</mx:height>
 
 
 <mx:selectionMode>multiple</mx:selectionMode>
 <mx:dataTipMode>multiple</mx:dataTipMode>
 <mx:showDataTips>true</mx:showDataTips>
 <mx:dataTipFunction>getDataTip</mx:dataTipFunction>
 <mx:horizontalAxis>
 <mx:DateTimeAxis minimum = "{minDate}"
 maximum = "{maxDate}"/>
 </mx:horizontalAxis>
 <mx:series>
 <mx:LineSeries dataProvider = "{values}"
 displayName = "Series 1"
 yField = "value"
 xField = "date"
 interpolateValues = "true"
 lineStroke = "{new SolidColorStroke(0x00FF00, 3, 0.5)}"
 stroke = "{new SolidColorStroke(0x00FF00, 3, 0.5)}"
 itemRenderer = "mx.charts.renderers.CircleItemRenderer"/>
 <mx:LineSeries dataProvider = "{values2}"
 displayName = "Series 2"
 yField = "value"
 xField = "date"
 interpolateValues = "true"
 lineStroke = "{new SolidColorStroke(0xFF0000, 3, 0.5)}"
 stroke = "{new SolidColorStroke(0xFF0000, 3, 0.5)}"
 itemRenderer = "mx.charts.renderers.CircleItemRenderer"/>
 </mx:series>
 </mx:PlotChart>
 </s:Panel>
</s:Application>
Any help is appreciated!
Thanks!

In Acrobat X Pro, fields are not showing up when previewing or creating Reader-enabled PDF

Similar Messages

Maybe you are looking for