In Adobe Reader form, need to change font size!

typing into a job application form, my font is too large. How do I make my font smaller to fit. On an iMAC. running Reader 10.1.12 or whatever is current.

You can only change the font size if the author of the form defined the field as having rich text contents. If that's the case press Ctrl+E and you'll be able to edit it.
Edit: It's Cmd+E on a Mac...

Similar Messages

Adobe Reader XI 11.0.07: font size in comments has been reduced to about 5pt with this update

Win7 x64/sp1 with many updates:
For the last few years, I have experienced major font problems with the comments, such as attempting to make a change in a font style causing Reader to lock up for about 3 or 4 minutes.
I allowed the update to 11.0.07 this am and the pdf I was working on, at length yesterday, now has the font size in the numerous comments I created reduced to about 5 pt. I know: that small isn't possible, but that's about what it looks like.
I believe that Adobe's quality control on Reader has been grossly lacking in the comments area. It has been suggested to me that I switch to PDF-XChange.
I will seriously consider it, because, as I open up pdfs from years past that I need to use for the material I'm working on, I see that the font size in all of those comments has been reduced drastically as well.
The only remedy that I can find is to open each comment individually and "Clear formatting."
That will amount to an enormous waste of time.
Please hire someone who is interested in quality control.

Hi Rohit Sh,,
Thanks for your answer. I have encountered a similar problem. While the font size of the comment created before the update remains unchanged, that of the comment created after the update reduce to about 5pt.
Then I tried to increase the Font Size from "Commenting" section under Edit->Preferences, the font size of both the old comments and new comments get increased. So, for example, suppose the desired font size is 10pt but the new comment look like 5pt, then when I update its value into 10pt again, nothing happened; when I change its value into 15pt, the old comment become 15pt and the new comment look like around 7-8pt; after this, if I change its value back to 10pt, the old comment would become 10pt as desired but the new comment now would become even smaller than 5pt. In conclusion, I can never make all comment have the consistent font sizes by changing the Font Size from "Commenting" section under Edit->Preferences, as it worked in the earlier version.
Please fix this. Thank you very much.

Need to change font size and style in output of report

hi experts,
im having a requirement of changing the font size in the output of report ( alv grid display).
regards,
andrews.

hi rob,
When i execute the report i want in the output of the report (alv grid display report)
regards,
andrews.

Need Help Changing Font Size on Mail Program

OS X 10.8.3
My mail list under "sort by date" column has a small font which I would like to make bigger.
I have gone to Mail>Preferences> Fonts & Colors but none of those cseem to change the font in the second mail column under (Sort by date).

There generally is no way to change the font, or font size. TinkerTool is one of a few utilities that will allow the change of some items, but for the most part, the OS ignores any settings you use in TinkerTool.
The default font for the system is Lucida Grande. You absolutely cannot change it. If you delete the font from the System folder, the OS will immediately replace it with a copy from a deeply hidden location. If you delete the font from both locations, the Mac will instantly become completely unusable, requiring a reinstall of the OS from your OS X installation disks. Unless you have another drive with OS X on it so you can copy Lucida Grande back to the drive you removed it from.
About the only easy way to increase the font size overall is to select a lower resolution in the Displays section of the System Preferences.

Personalization change font size

Hi,
i create new item using Personalization with Item Style Static Styled Text. I need to change font size. How to perform this.
Thank you.

OraErrorHeader will change the font size but the font will come in RED.
OR
You can create a custom CSS and set the CSS Class. -- Read more in Forums how we can create custom CSS.
Thanks
--Anil

Change font size of WEBGUI in SAP ERP

Hi all,
I need to change font size of WEBGUI in SAP ERP.
It is easy to change it in Webgui of SAP BI, using Internet Explorer functionalities (View -> Text size -> Largest), but same procedure doesn't work for transactional SAP modules (i.e. SAP HR).
Do you know how I can change the font?
Alternatively, do you know if it exists any patch or support package to resolve the problem with IE?
Thank you in advance,
regards
katia

Hi Katia,
there is - as far as I know - no way to change the fonts size of the WebGUI screens. The way the lay-out of the Dynpro screens and its controls is determined does not allow to scale by different font sizes.
regards
Tobias

Changing font size(bold) or color of a particular row in ALV Grid Digplay

Hi Experts ,
I am having a requirment to highlight some particular rows in ALV Grid Display . To achieve this i need to change font size or make it bold or change color of that row .
Please give me some inputs .
Thanks in Advance.
Vijyeta

Hi
Coloring An Entire Row
Coloring a row is a bit (really a bit) more complicated. , you should add an additional field to your list data table. It should be of character type and length at least 4. This field will contain the color code for the row.
First you have to declaration of our list data table u201Cgt_listu201D.
DATA BEGIN OF gt_list OCCURS 0 .
INCLUDE STRUCTURE SFLIGHT .
DATA rowcolor(4) TYPE c .
DATA END OF gt_list .
Adding the field that will contain row color data
As you guess, you should fill the color code to this field. But how will ALV Grid know that you have loaded the color data for the row to this field. So, you make it know this by passing the name of the field containing color codes to the field u201CINFO_FNAMEu201D of the layout structure.
e.g.
ps_layout-info_fname = <field_name_containing_color_codes>. u201Ce.g. u2018ROWCOLORu2019
You can fill that field anytime during execution. But, of course, due to the flow logic of screens, it will be reflected to your list display as soon as an ALV refresh occurs.
Try this link also:
Possible functionalities in ALV
Regards
Neha

Change font size in drop-down form item

When I'm in design mode, I assigned the drop-down item a
style class of 9pt
font and it looks fine in design mode. When I go to view in
IE, the font
looks like a standard 10pt font and doesn't change when I
change the class.
So, all of my titles are in 9pt but the form text boxes and
drop-down boxes
are all using 10pt font.
How do you change the font used in form fields?
Thanks!

One should not use a print metric on the web. Please use
pixels, ems, ens,
exs, percents, or font size names, but definitely not points.
> How do you change the font used in form fields?
select { font-size: 9px; }
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Beverly" <[email protected]> wrote in message
news:ernl49$iei$[email protected]..
> When I'm in design mode, I assigned the drop-down item a
style class of
> 9pt font and it looks fine in design mode. When I go to
view in IE, the
> font looks like a standard 10pt font and doesn't change
when I change the
> class. So, all of my titles are in 9pt but the form text
boxes and
> drop-down boxes are all using 10pt font.
>
> How do you change the font used in form fields?
>
> Thanks!
>

Change font size in adobe 11

i just recently downloaded adobe reader 11 so i could save pdf files. An option for changing font size then popped up so i installed that, however i am still unable to change font size. someone help me please!!

It depends which view you are in.
If you are in the Album view you can't change it, but in the Artists and Genre views you can.

Adobe Reader is needed to view these files

Hi,
I have a website that I enter pdf files too to show results. However, when someone goes to view the results page it asked "Adobe Reader is needed to view these files. Click here to download it." After it has downloaded and installed and I go back to the results page, the same message appears.
The webpage is: http://clayshooting2000.co.uk/results.php
Has anyone got any advice?
Thanks,
James

I believe nothing is wrong but the site is very confusing. Whoever wrote the page expected a collection of results to be on the page as well, so the message would make sense: here are some results, to view them you will need Reader (if you don't have it). But in fact there aren't any results at the moment (perhaps clearing the decks for the new season).

I created a brochure in pages and exported it to a pdf format. The pdf looks and opens perfectly using preview but when opened in adobe reader (which my printer uses), fonts look odd, transparencies don't display...etc. Tells me error exists on page?

I created a brochure in pages and exported it to a pdf format. The pdf looks and opens perfectly using preview but when opened in adobe reader (which my printer uses), fonts look odd, transparencies don't display...etc. Tells me error exists on page?

Does this essentially mean there is no way to fix this problem on my end? It's a pity because the design and branding of my brochure will suffer if I remove transparencies and use different fonts. It also concerns me moving forward because it means the quality of print on my pieces will be significantly lower because most commercial printers use Adobe products.

Adobe Reader forms broken under Mavericks

Aftr installing Mavericks on Mac, you can fill in Adobe Reader forms as before, but when you try to e-mail them only the blank form is put in the e-mail. Anyone have a solution? Any idea if this also happens with Acrobat?

is the problem specific to Reader 11 ? not experienced on reader 10 ?
you could compare the settings of a working Reader 10.x with Reader 11.x where it throws the exception.
Also ensure that while creating form in designer > File > Form properties> Default PDF render format is set as: Dynamic XML Form.

Unable to open Adobe Reader with ability to changes PDF to word

adobe reader with ability to change from pdf to word stopped working I purchased a new year and it does not work?

John,
Glad to hear everything is working. I'm surprised, too, though, because these subscriptions are on auto-renewal when you subscribe (unless you cancel before the subscription runs out).
So....I just double-checked your account. You had a CreatePDF basic subscription which expired on August 28 (I'm guessing that one wasn't on auto-renewal).
In any case, I think all is well now!
Best,
Sara

Error " Adobe Reader - cannot extract the embedded font 'Ariel Bold "

Hi gurus!
I have created smartform for pdf invoice via mail to user id. when that invoice send to user id . PDF file is getting a popup -" Adobe Reader - cannot extract the embedded font 'Ariel Bold . Some characters many not display or print correctly ".
I want to remove this unwanted popup. please provide any possible solutions.
regards,
Ravi

Hi ravindra, what i can suggest you is to set a breakpoint just before ur cursor goes into the pdf part and just comment the part when it comes to the popup. its very easy and the best way to do it.
Cheers

How to change font size in smartform and set layout of smartform

Dear abapers,
I want to change font size in smartform and also set the layout of smart form how can we do this.
Thank you sir.

Hi,
you can do it first you need to goto smartforms tcode there click on radiobutton 'Style'.
Give any name and click on create. Right sideyou can find character format right click on it and create a node .A pop will raise gve a 2 characterlike z1 or a1 etc click on font tab gve size and font style and click on save and activate. Use this style in your smartform you can apply what ever styles created in styles you can use it in your smartform by that smartstyle name.
When we create text in output options give your smart style name and click on general attributes . Select your text and apply the style what thse size it should be and what the font style it should be.
Goto smartforms tcode and select formpainter in application bar set layout according to your requirement.
Thanks,
venkat

In Adobe Reader form, need to change font size!

Similar Messages

Maybe you are looking for