In ALE/IDOC Change Pointer using Maintenance order for message Type

Hi All Expert,
I am using Maintenace order to send via ALE/IDOC(Change ponters), i need standard message Name for Maintenance Order,

Hello,
I'm not sure you're taking the best approch.
Usually when you need to migrate ISU contracts into an ISU-CRM integrated system, you first migrate everything you need in ISU through the VERY powerful migration workbench available (transaction code EMIGALL), and then you replicate your data to CRM via INITIAL download.
That's definitely the strategy that will give you the best performance, and less work.
Kind regards,
Nicolas Busson.

Similar Messages

  • HRMD_ABA change pointer trigger not work for info type changes

    Hi,
      In change pointer for message type HRMD_ABA Certain changes to HR records like adding activity types to infotype 315, changing dates to infotype 0001, 0105 and 315 and adding/changing/deleting are not woking through change pointers.
    We are are replicating those changes through RHALEINI program, so can anyone let me know how to customize in case of adding this info types to trigger automatically through change pointers.
    Thanks,
    Marai

    Hi,
       Then check for change document created or not, if created then use SWEC  to  link it

  • Error in ALE service 29 Could not determine recipients for message type MAT

    Hi Experts,
    While transferring the material using ALE am getting  error 29 ie   'Error in ALE service'  and message is 'Could not determine recipients for message type MATFET'.
    Also i ve recieved the materials with the proper status al the end am getting the above error.
    Kindly help me out.
    Thanks in advance.

    Hi ,
    Status 29 means " partner profile not found " . Please check if the recieving partner is configured properly  in WE20 in sender system.
    Also make sure that the Port and RFC definations are also completed. If the IDoc is manually triggered then please make sure that control record parameters of the idoc are properly filled - if we miss the details ( like wrong port given , wrong basic type for message type - or extended message type ) then also the idoc will fail in status 29 even though the partner profile is properly configured .
    Since your idoc is getting generated i think no issues with BD64 since already interested recipeints were populated in control record of idoc.
    Regards
    Vikas Chaudhary

  • ALE settings error   "Too many recipients found for message type" urgent

    Hi all ,
    please help me to solve this issue !!!!!!!!
    i done with ale settings .
    in the bd64 , orders message type is used in 2 different model view for 2 different systems
    when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
    how can i rectify this error.
    Thanks

    Hi,
    Try to redefine your distribution model to have both receivers of your message type ORDERS in one "model view".
    Regards,
    Jakub

  • ALE Idoc Change Pointer Question

    Though I selected Transfer Immediately on Partner Profile screen, why Idoc hasn't been generated and transmitted?. Why do I have run RBDMIDOC explicitely to pickup change pointers?. Appreciate your responses.

    Hi Appana,
    Thank you for your time. I did checked all these steps still no luck.
    1.Go to the Data Element of the field and check whether change doucment option is checked or not .
    DONE
    2.change the value of the field and check the entries in CDHDR and CDPOS.here u can check the change document object and table .
    DONE
    3.check BDCP table also incase of ALE.The program RBDMIDOC generates IDOc when there is an entry in BDCP.
    if not check the following config
    1.BD61- change pointers activated -generally
    DONE
    2.BD50 -Activate change pointers for ur message type
    DONE
    3.BD52 - add the triggering fields and corresponding tables and change document object.
    DONE
    Please check the entries in BDCP table ,if u find the entries execute the program RBDMIDOC
    DONE
    Any places I missed ? Please note usual ALE config has been done like SM59,WE,20,WE21 etc. Iam basically sending this Idoc to XI and then to 3rd party system.

  • Which IDOC segments need to be filled for message type CRMXIF_ORDER_SAVE_M

    Hi ,
    I am working on data migration to CRM7.0 system.I am using LSMW for creating ISU Contracts using CRMXIF_ORDER_SAVE_M message type and CRMXIF_ORDER_SAVE_M01 IDOC kindly help me in what all segments needs to be filled for creating ISU contract in CRM system.
    Kindly share if there are any documents related to data migration into CRM system for IS - Utilities.I need to migrate  u201CBusiness Partnersu201D, u201DISU Contract Accountsu201D, u201DConnection Objectsu201D, u201DPODu201D & u201CContractsu201D  to CRM 7.0 .
    Also I need to migrate Customer Interaction Records, Business Activities, Service requests and other information such as u201CProspectsu201D, u201CMarketing Attributesu201D to CRM 7.0.
    Kindly help me in this as I am not able to find any thing from web.
    Regards,
    Suresh.

    Hello,
    I'm not sure you're taking the best approch.
    Usually when you need to migrate ISU contracts into an ISU-CRM integrated system, you first migrate everything you need in ISU through the VERY powerful migration workbench available (transaction code EMIGALL), and then you replicate your data to CRM via INITIAL download.
    That's definitely the strategy that will give you the best performance, and less work.
    Kind regards,
    Nicolas Busson.

  • Generating an IDOC for Message type PROJECT in Change pointer?

    Hi,
    I am trying to generate an IDOC. for the Message Type PROJECT(Actually this msg. type PROJECT is for BAPI method) in CHANGE POINTERS but it is possible Error is coming, is there any other method to use the message type in change pointer technic.
    Thanks,
    Vinayak,
    Message was edited by: vinayaga sundaram

    Hi Vinay,
    Had a similar requirement few days back..
    What we did was to do a multimapping of 1:N where N = N1 and N2, N1 is the Idocs which you are doing today, N2 is the set of invalid records...
    Now we have written this as a file and then created another interface which will pick the file and based on the name of file we decided the To address. We have used mail package and this interface (file to mail ) was made as a generic one so that it can be used across many interfaces...
    filename and To address relationship was maintained as a value mapping in ID... You can have a thought of this approach and try to send the invalid records as a mail rather than alert.
    Regards
    Suraj

  • Too many recipients found for message type ORDERS in the ALE model

    Hi all ,
    please help me to solve this issue .
    i done with ale settings .
    orders message type is used in 2 different model view for 2 different systems
    when i create po it is giving error in output  "Too many recipients found for message type ORDERS in the ALE model"
    how can i rectify this error.
    Thanks

    > orders message type is used in 2 different model view for 2 different systems
    do both of them carter diffrent needs or is it the same idoc which is being sent to diffrent systems?
    if yes, then use a single model view with noth receiver systems defined in it.
    if not, i would suggest, copying the standard idoc and create a zidoc and then use different ones for diffrent receivers....
    or u can use diff versions of the orders message type...
    say orders05 for one.... receiver and orders02 for another one....
    hope this helps!!
    Cheers!!
    Sidharth

  • Maintenance order for Refurbishment

    Dear Experts,
    I have created a maintenance order for the equipment E12000003 with order type PM01 and using the control key PM03.Material 12000003 representing the equipment E12000003 issued against the PM order .
    Purchase requisition is created at the background , which converted to PO and the material 12000003 issued to vendor through a deliver challan.
    Acceptance of service through service entry sheet and GR at the background.
    Confirmation of time for the order and GR for the PM order done .Settlement of the order against the material which issued against the order.
    We are planning to follow the above cycle instead of refurbishment process as we donu2019t want to have split valuation .  Please correct me if ia m wrong.
    Thanks,
    Ram

    Hi Ram,
    The method u are using is ok for some companies. But the following questions arise which are to be answered,
    1.How do you fix the cost of the refurbished material? will it be the original cost (cost, if bought from a vendor)
    2. You draw and use spare parts for refurbishing the eqpt. If the spare parts cost is more than the original equipment cost how do u account for it?
    3. The refurbished material must be certified to be as good as new, otherwise its cost must be split based on the condition. In your case all the time the cost will be same. Is it ok? Mind you once the refurbished material is returned to store, there is no replenishment and if the plant condition needs a new spare u do not have one!
    4. In the accounting it can happen that u refurbish few costly materials and in the end of the year return them to stores to bring down the maintenance cost vs budget. How these are controlled?
    But it does not mean the SAP way of refurbishment is an complete solution.
    regards,

  • LSMW: ALE/IDOC, getting the Create a partner profile for message type

    Hi Gurus,
    In my current project, i need to upload the employee data using the ALE/IDOC method with the LSMW
    when i'm generating the idoc in the 13th step, its posing the information message stating that:
    Create a partner profile for message type 'ZEMP_MSG'
    In partner profile i already assigned the message type .
    How to solve this issue, <inappropriate urgency removed by moderator>
    Thnks&regards,
    sree
    Edited by: Thomas Zloch on May 13, 2011 9:55 AM

    This forum's aim is not only to search for information and ask the members questions, but also to share knowledge. When you have asked a question and found a solution, do share with the rest.

  • Background Scheduling of Maintenance order for Calibration.

    Dear Experts,
    I want to scheule my calibration order in QM for calibration of Test Equipment in background.
    I have created my maintenance order for calibration of Gauges / Instruments (which are defined as Equipments). The dates for the calibration have been calculated based on time. When I go to the transaction of scheduling the order & save, the inspection lot for calibration is generated & the equipment task list is assigned to the lot.
    I want this to automatically happen in background. This is because I have thousands of equipments, for which I can not schedule the calibration manually.
    Regards,
    Prashant

    Hi,
    Please check below link if this can help it.
    http://help.sap.com/saphelp_scm2007/helpdata/en/c3/9e443cfb06e532e10000000a114084/content.htm
    Regards,
    Anil

  • Using internal order for a gl in FBCJ Screen

    Hi All,
    I would ike to use internal order for GLs/Vendor accounts like employee vendors or MM vendors in the Cash Journal i.e. FBCJ Screen.Hos should I do it.
    Simillarly I would like to give the work order /po reference for such advances in the FBCJ Screen.Is it possible to do it?
    Thanks in advance for your replies.
    Regards,
    Manoj mehta

    Hi Manoj,
    It is possible to use Internal Order for GLs/Vendor accounts like employee vendors or MM vendors in the Cash Journal i.e. FBCJ Screen. The internal order field maybe invisble on the screen.Follow the following steps:
    1. Click on the Configuration tab - Blue, Yellow, White Striped Square on the right top corner of FBCJ Screen.
    2. It will open the Table Setting Tab, Click on Administrator.
    3. It will open Edit System Settings, Check whether the in the cloumn, order is having tick in the Invisible Column. If it is ticked remove the tick & click on Activate.
    4. Close the Edit System Settings  & Save the Table Settings.
    Thank You.

  • HT4759 what hardware is/are used in order for the Apple: iCloud to run?

    what hardware is/are used in order for the Apple: iCloud to run?

    Apple - iCloud - Learn how to set up iCloud on all your devices.
    More Info Here  >  http://www.apple.com/support/icloud/

  • Create Maintenance Order for the Sub assembly and the top assembly together

    Hi
    We create repair order for an equipment when it comes for maintenance.
    We want to create repair/maintenance order for all the sub assemblies for the equipment along with the order for the top assembly at the same time.
    Appreciate your guidance.

    Dear Srini K
    Please create the order for the main equipment & create suborders for the sub assembly is one way to do it. so that main order & other orders may have link to each other.
    Another way if you want to store history that which are the assemblies are affected or you have worked on it you can enter these in all assemblies in object parts tab of the orders.
    Also you can create the notification & maintain the object parts code, Damage code & cause code for each assembly & sub assembly sothat you can keep history.
    But if you can tell me the business requiremennt it detailed i can guide you ini correct direction.
    I hope this will satify your requirement.
    Regards

  • Too many recipients found for message type in the ALE model

    Hello Friends,
                            Please help me in solving this error. I have a Outbound sales order confirmation ORDRSP  .
    In the distribution model i have defined the sender receiver and message type clearly...
    But  in va01  after creating sales order  extras ->Output->Hearder --->Edit
    Output type-- BA00
    medium --ALE
    Dispatch time : Send Immediately
    I am getting a error -
    Too many recipients found for message type ORDRSP in the ALE model
    Message no. B1130
    Diagnosis
    In the ALE distribution customer model several recipient systems for IDOCs with message type ORDRSP and filter object type 'KUNNR' with value '100' have been modeled from this system, but only one recipient system is allowed.
    Procedure
    Please change the ALE distribution customer model so that it allows only one recipient system for the message from this system.
    Please help me in solving this error.
    Regards,
    jeevan

    Hi Jeevan,
    In BD64, the said problem occurs, since the message type ORDRSP will be configured to different Logical System.
    Since you are creating sales orders & Output type, system doesnt knows, to which Logical system, it has to be sent since the Message type exists more than once.
    select Your respective Logical System where the Outbound Sales Order Confirmation ORDRSP has been created.
    Under the node ORDRSP, add the filter group for Customer.
    Double click the Filter group and add the respective Customer No.s to whom the Order confirmation needs to be sent.
    Then create Sales Order Confirmation & Output type. Data will be passed(IDoc) to the respective Customer(where the customer no.) exist in the filter.
    Hope it solves your Issues.
    Regards,
    Anbalagan.

Maybe you are looking for