In all programs, screen grays out after I type 11 character

It acts as if I am on a different page.  I have to click on the page again to continue typing.  Very annoying

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Similar Messages

  • EPMA 11.1.2.1 - All rights suddenly grayed out after deploying ASO cube.

    I created and successfully deployed an ASO Cube using EPMA (11.1.2.1). The next day, all rights to the ASO cube were grayed out in Application Library (i.e. Deploy option was grayed out). We learned from Oracle Support that you need to explicitly provision the creator with Application Manager rights to the cube, even if you are the creator of the application. This
    behavior for ASO (and probably BSO cubes) is consistent when compared to a Planning Application (creator is automatically provisioned). Oracle Support confirmed that this is the correct behavior and that EPMA is functioning as designed.

    Are you saying that if you add the attributes manually in application it is coming to essbase and the ones in shared dimension are not coming.
    Check whether attribute is inherited or defined at application level.
    Regards
    Celvin

  • Stop button grayed out after a new instance is launched

    The stop button gets grayed out after a new instance is launched.  Could someone please help me out?  Just a screenshot reply will do just fine since I'm still using v8.6.  Thanks.

    VTKim wrote:
    Hi lavalava,
    I have looked over your VI and tried to run it and while I can run your VI and get the same error, when I try to recreate it in a new VI, I cannot recreate the issue.  The only difference between your test.vi and mine is that I am not calling the Xcontrol. I am calling the same set of 4 random number generators and putting them into a cluster, but I am not referencing the RNG cluster.  I think this is where the issue lies and it is possible that you Xcontrol is corrupt.  While I could find the Data 2 that shows up in the test.vi, I couldn't find the image.vi  Where are you calling the image.vi? 
    Also, have you tried developing your program on a different operating system?  LabVIEW is not supported on Windows XP 64 bit, and while it seems to operate fine in most cases, there are definitely a few instances that will have unexpected behavior in the XP 64 bit environment.  Thanks!
    Kim W.
    Hi, Kim.  It sounds like you were never able to run the attachment to see the actual problem.  This is simply a drawing issue with Labview.  I have already tried this on XP x64, XP x32, Vista x86, Vista x64, and 7 x86.
    The image.vi is inside "RNG" folder.  All the files you needed to run the simulation should be included in that attachment above.
    Thanks

  • Get Info--Info Tab--All information is grayed out....can't change anything

    In iTunes, right click on a song in the library, click on Get Info, click on Info, All information is grayed out and cannot be accessed and/or changed. Question: How do I correct this situation? I uninstalled and re-installed iTunes to no avail. I am on a PC with Windows 7.

    Hi, I'm just brand new to the forum and Itunes and had the same issue with an album I had imported (no track or album info)and likeyrself could not get the Advanced "get track name" as it was greyed out.
    After a lot of searching on this forum, with no luck, I changed the VIEW mode from GRID to LIST and then bingo, the option ("get track name") was no longer greyed out!!
    Hope this helps. Cheers Dennisg
    PS: As a first time user, I'm fast becoming UNHAPPY - I imported a Rod Stuart album and the Bloody Itunes made 4 albums out of the one, because he sang a few duets - HOw silly is that!!

  • I/O field grayed out after check box checked ( Dynpro)

    Hi ,
    I have dynpro  dialog screen  with several check boxes linked with input/output field
    When check box is checked the I/O field is editable when check box is empty I/O field should be grayed out.
    I am trying to find the way how checking the check box can trigger the change of attribute of I/O field.
    The IO field should be gray out after checking check box without hitting enter or any other button.
    Please advice
    Chris

    Hi ,
    Thank you for your answer. I was missing Functional code of my check boxes.
    Now i have still issue my I/O field do not turns in gray ( only output) In loop
    I dide like you said ( this is example from my PAI module user-command)
    when 'CB1'.
          loop at screen .
            if screen-name = 'LT_FORMAT_IO'
              and lt_format_cb is initial.
              screen-input = '0'.
              screen-invisible = '1'.
              modify screen.
            endif.
          endloop..
    Once screen is displayed again , the IO field stll remains non grayed out.
    Please advice
    Chris

  • All options are greyed out after i Click on Apply Maitenance

    Hi All,
    I am upgrading our EPM system from 11.1.2.1 to 11.1.2.2. I have downloaded all the required files from e-delivery.oracle .com and unzipped them. I selected Apply Maintenance and when i clicked next all the options are greyed out. I am not sure what i have done wrong. I am using the same user ID which was used for installation of hyperion 11.1.2.1.
    Kindly help me out.
    Find the screenshots at my blog.
    http://hyperion-consulting.blogspot.in/2013/01/all-options-are-greyed-out-after-i.html
    Regards,
    AS

    From your screenshot it says that 11.1.2.2 Foundation has been installed when it should say 11.1.2.1 like this - http://2.bp.blogspot.com/-J_9A8U41JS0/T5WXO3JQtxI/AAAAAAAAEj8/0nqcNdo1bFQ/s1600/image022.png
    Also you should only have the option to "Apply maintenance release" like this - http://1.bp.blogspot.com/-1zQHVCODSr0/T5WXNLQN4YI/AAAAAAAAEj4/vNQ_vOT03_8/s1600/image021.png in your screenshot you also have the option to Re-install the release.
    Are you definitely sure the environment has had nothing applied to it.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Have a 2nd gen nano and all music is grayed out, can't create playlists or manage library

    I've updated  to the latest iTunes SW and now all music is grayed out on my iPod.  I have restored and still no luck.  Any ideas?

    The file wasn't locked. I just can't figure out how all the music is closed off from making any adjustments. Thanks for the suggestion.
    Chad

  • My wi-fi slide is grayed out after IOS 7.1 update

    I have the iphone 4s and my wi-fi slide is grayed out after my update of IOS 7.1. I tried network reset and factory reset and it still didn't work. Please help.

    There was no "force".
    There is nothing about iOS7 that breaks Wi-Fi on the iPhone 4 or any other iPhone.  Don't believe me?  Lift your fingers and search these forums, you'll see issues going back to at least iOS5 with multiple versions of iPhones where after an iOS update the Wi-Fi is grayed out.  It is not a specific version of iOS or specific models of iPhone. 
    The issue is simply that on some iPhones, the Wi-Fi hardware is "on the fence" so to speak, and upgrading iOS (regardless of version) is extremely difficult on the hardware.  Unfortunately, the Wi-Fi has failed. 
    Nothing lasts forever.  Accept it and move on.
    David Scotland wrote:
    Any Apple people watching this forum like to confirm what the situation is? 
    These are user to user forums, Apple does not post here.  Apple does not confirm rumors or comment on speculation.

  • How to fix iphone 4s wifi grayed out after update ios 6.1.3

      how to fix iphone 4s wifi grayed out after update ios 6.1.3 ?
    for this problem , I try to fix several ways that hope can fix . it come form internet , youtube ,some one told , such as use lamp app , airplane mode , and freezing but it can not work anymore .

    http://support.apple.com/kb/ts1559
    After following the steps included with the link provided, if you are still unable to turn Wi-Fi on, please contact Apple for support and service options.

  • Black screen & all menu items grayed out -help!

    Sorry folks, total AE nube here, in over my head already. Having just purchased AE CS3 I'm completely adrift.
    I was in the process of looking at & changing preferences when shortly thereafter my screen went All black. A friend suggested it may have something to do with the output display, which may be the problem, however, I have gievn up searching after 4 days trying different searches in the program help function with no joy.
    Apparently, I don't know "Adobe Speak" well enough to phrase the seach to get meaningful results. I did finally find that If I put the cursor at the very top of the screen & click I can then see the menu. Every dropdown list in the menu, is grayed out and no amount of pounding on the keys, gnashing of teeth, pulling hair, etc will allow me back in to the preferences where I suspect I misunderstood what the selection of "Cinema display" would do. Unfortunate that FCP 7 allows one to select that for a higher resolution view that I have in fact used before.
    If that was indeed my error, since even the preferences are grayed out, how does one reset preferences to factory default?
    OR
    Is this a problem of a different nature? The monitor works just fine in all other programs, so I don't bevieve that is the problem.
    Any help would be greatly appreciated.
    Ken

    Well,
    I just don't know why I keep buying this Adobe crap. Apparently, they must outsource all the programming to China, because it sure isn't written in a way that I can understand as an American. Like most of the big software companies, they do not provide either a clear path to or a coherent explanation of how to use the arcane & obtuse programming that makes up their fare. Of course, you never really know what you are getting into, because they don't make it clear just how difficult it is to learn or use.
    In their rush to make gobs of money, they seem to have forgotten that not everyone who purchases their crap has had enough prior experience to undestand the little known secrets of how to find out what to do when all goes wrong.
    It is the same mistake that many programmers the world over make day in & day out, they can't concieve that those who have no familiarity with the way they see how to make their software work, find their software unfathomable. THE NEWS FLASH IS THAT NOT EVERY ONE KNOWS WHAT YOU KNOW ABOUT HOW TO MAKE SOFTWARE WORK. The attitude seems to be: "Anyone who doesn't know the secrets of the brotherhood shouldn't be using it!"
    As one who once went through the rigors of obtaining a CS degree (and actually considered starting a software company), it became obvious (20 years ago) that the future was not how many tricks you could make the pony do, but rather how intuitive you could make the software to allow the intended user to operate it without having to know it's arcane secrets AND to make it fault tolerant and self healing as much as possible. The telephone is a reasonable analogy, very few people know how it works, but they sure can use it until the cows come home with very few operator errors. In short, the technology is virtually transparent to the user.
    I realize that company cultures rarely change unless an outsider is brought in to clean house and start afresh and that the likelyhood of that happening at Adobe is about the same as winning the Powerball lotto Jackpot 3 times in your life. I guess that makes me a modern day Don Quixote, but so be it. I also know that EVERY organization that does not change it's approach to the marketplace will eventually be replaced by some upstart who figures out a way to do it better.
    So, ladies & germs, I did what anyone who uses a telephone would do when you aren't making any progress, I hung up the phone (un-installed the program) and stopped trying to figure out the technology that keeps my screen black AND does not allow me to undo the prefs quickly, and with a new dialtone, I redialed the number (re-installed). A clever little monkey am I.
    If it happens again (or something similar) I'll bring my disk and man's best friend to the park for a stress bustin game of frisbee!
    Adobe, it really is the 21st century, and you have failed miserably at meeting the future of making software more transparent to the user !
    Ken
    P.S. - For the record, I've been in an altered state (call frustration) for 20 years worth of Adobe products, and the light at the end of their tunnel, IMO is an oncoming train.

  • Photoshop CS3 10.0.1 - Launch hangs on Registration Screen, All menu items grayed out

    I'm using Adobe Photoshop CS3 10.0.1.
    When launching, the window labeled "Adobe Design Suite Premium CS3" opens - it's only filled with white, and no text or graphics (I think it's usually the window asking me if I want to register, which always comes up when I launch the program (rather annoying in itself).  However, now it seems that the launch gets "hung" on this window, as, even the the program starts, all the menus are grayed out, and I can't open any files or do anything.  Also, the window mentioned above only has the yellow "minimize" button available in the top left corner, so I can't close it or otherwise get rid of it.  Since even the Quit function is grayed out, I have to quit the program with a force quit.  Also, this same thing happens in my other CS3 programs (In Design) as well.
    I tried trashing the photoshop plist file (com.adobe.photoshop.plist) and also the com.adobe.118.registration file, which had no effect.
    Any advice on how I can fix this?
    Thanks!

    Hopefully this solution will work for you:
    http://forums.adobe.com/thread/1339100?tstart=30

  • After sleeping for ~30m MBPr closes all programs and logs out

    MBPr 15" Oct 2013 version, OS X 10.9.4
    I have the bottom left hot corner set up to sleep my mac.  Every time I do this and leave it for around 30m, it closes all my open programs and logs me out, and I can't figure out why. 
    In Energy Saver I've enabled "Prevent computer from sleeping automatically when the display is off", and disabled "Put hard disks to sleep when possible".
    Are there any other settings somewhere that affect this?

    Hello Byron Gibson,
    Thanks for using Apple Support Communities.
    Please check your Security & Privacy Advanced settings to see if you have the option to log out after a certain time of inactivity.
    OS X Mavericks: Set your Mac to log out when not in use
    http://support.apple.com/kb/PH13943
    Take care,
    Alex H.

  • Writeback button still grayed out after all the steps I have taken

    Hi experts,
    I have created simple writeback request, and writeback is enabled for one column, and I have placed xlm template under:
    C:\OracleBI\web\msgdb\customMessages\
    and my writeback button still grayed out.
    Below is my xml content:
    <?xml version="1.0" encoding="utf-8"?>
    <WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
    <WebMessageTable lang="en-us" system="WriteBack" table="Messages">
    <WebMessage name="target">
    <XML>
    <writeBack connectionPool="retail sales connection">
    <insert> </insert>
    <update>UPDATE market_share_target SET target_pct=@{c3} WHERE group_cd=@{c0} and region_cd=@{c1} and vehicle_ctr_cd=@{c2}</update>
    </writeBack>
    </XML>
    </WebMessage>
    </WebMessageTable>
    </WebMessageTables>
    Thanks very much

    I added dummy sql in the <insert> section, and restarted services, still the button is greyed out.
    <?xml version="1.0" encoding="utf-8"?>
    <WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
    <WebMessageTable lang="en-us" system="WriteBack" table="Messages">
    <WebMessage name="target">
    <XML>
    <writeBack connectionPool="retail sales connection">
    <insert>SELECT 1 from market_share_target</insert>
    <update>UPDATE market_share_target SET target_pct=@{c3} WHERE group_cd=@{c0} and region_cd=@{c1} and vehicle_ctr_cd=@{c2}</update>
    </writeBack>
    </XML>
    </WebMessage>
    </WebMessageTable>
    </WebMessageTables>

  • Adobe ID screen grays out with swirl in right hand corner when asked to enter info. Stays that way. I am locked out

    Trying to launch elements. Adobe ID required. Enter info. Then I get a grayed out screen with swirl in bottom right corner. Never lets me into program.

    Hi lospesca,
    Thanks for posting on the Adobe forums.
    Please follow these steps :
    Go to following location:
    for Win
    C:\Program Files (x86)\Common Files\Adobe
    C:\Users\username\AppData\Local\Adobe
    for MAC
    Finder> Go > Go to Folder
    \Library\Applicaiton Support\Adobe
    ~\Library\Applicaiton Support\Adobe
    Locate folder OOBE and rename it OOBE.old
    Download and install
    Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
    Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager
    After the installation
    Try to Open Adobe Application Manager / Creative Cloud App.
    Log in that with Adobe ID and Password.
    If it does not work first try couple of times more.
    Let me know if this resolves the issue.
    Regards,
    Sandeep

  • Page Forward & Reverse buttons do not work & are "grayed-out" after upgrading to, as is the Main-Menu Items such as File-Edit-view etc...

    After upgrading to Firefox 3.6.12 all functionality appeared to be intact. Then after a few days it lost the ability to "page forward" or to "page back" and are "grayed-out". Additionally, the Main menu items such as File, Edit, View, History, Bookmarks, Tools & Help are also grayed-out and non-functioning.
    Also, the "Search Window" does not search, Web Searches need to be performed from within the URL window instead, for some crazy reason. If the URL window is blank when I enter a search into the actual search window the following appears in the URL window, "Search Bookmarks and History", which makes no sense.
    I have noticed similar complaints in this Forum in the past but I have not seen any posted resolution to these issues. Is there a solution?

    Create a new profile as a test to check if your current profile is causing the problems.<br />
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Maybe you are looking for

  • How to install OS X Server on Intel MAC

    Hello, I have early copy of Tiger OS X Server and I would like to install it on my Intel Mac. Can anyone help? Thanks, Vladik

  • How I break while loop activity in BPEL process

    Hi Guys, I want to do a polling action in my bpel process, I put in the polling code in while activity , I try two way to do the break : 1. use the Flow activity , one sequence for while loop activity , one sequence for timeout flow , put waiting act

  • Opening files in Ejbs

    Are there are any restrictions on enterprise beans opening and reading files? I have never seen it discussed anywhere.

  • Where can i download minisap for free ?

    Hi, where can i download minisap for free ? differences between minisap and sap? Regards

  • KeyListener Q:

    Here is my code: package Pong; import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import javax.swing.JPanel; * @author Michael Dean public class Pong extends JPanel {     private int xPos;     private int yPos;     private i