In an interactive report, after going to 5th list, can you come back to 2nd

Hi guys,
I am having a simple doubt, can you clarify me.
In an interactive report, after going to 5th list, can you come back to 2nd list? how?

HI,
Write this under at line selection.
Atline-selection
case sy-lsind .
when 1 .
when 2 .
when 3 .
when 4 .
when 5.
sy-lsind = 2 .
when 12 .
when 13.
endcase .
Thanks
Mahesh

Similar Messages

I have serious problems with I OS 6 - I am loosing internet connection after a few seconds or minutes. What can I do? Can I come back IO S 5.1.1.?

I am experiencing serious problems after downloading iOS 6. I am loosing my connection after a few seconds/minutes. What can I do? Can you come back to 5.1.1.? How can I do that?

You can't downgrade the iOS.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I'm missing a lot of my pictures on my phone after going to the cloud. You cab see that the were there but it's just a grey tile now. When I click on it it just spins loading. Any help would be appreciated.

I'm missing a lot of my pictures on my phone after going to the cloud. You cab see that the were there but it's just a grey tile now. When I click on it it just spins loading. Any help would be appreciated.

I, on the other hand, had no brightness issues on the 4S after upgrading to iOS 6, and no change in (good) battery life. If could be something else, an app or background process that is less efficient with iOS 6? Could be anything.

Why does my iphone 3gs screen goes black after reaching another party and won't come back on to press end the call

why does my iphone 3gs screen goes black after reaching another party and won't come back on to end the call

hi smalley3,
Welcome to the Forums.
The flickering issue maybe due to a bad LCD cable or in some cases, a faulty GPU (the GPU is integrated to the CPU, and the CPU is soldered to the motherboard).
If there's still no image on the screen even after connecting an external display then you likely have a bad GPU.
In this case, I recommend you contact support for service (and also to see if there's a consideration that can be done on the warranty repair).
Support phone list
Regards

New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord. Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on.

New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord. Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on. Sometimes holding the power button for a second is enough for it to come back on.

I took it to the Genius Bar, and they identified it as a hardware issue. Just got it back today. Parts replaced were:
620-5629 Display Module — Symptom: Distored/blurred/focus video issue
605-3284 Top Case with Keyboard — Symptom: specific key(s) do not work
So far so good. I'd suggest taking it in and not trying to work around it — it's a rare hardware issue (given the number of threads about it) and should be replaced.

Apple Composite AV Cable no longer working on Ipad2 after ios8 update. Only getting sound, can you revert back to ios7 or buy a cable that will work any help would be appreciated

Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
Thanks

The 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).

I just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?

i just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?

"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

Mozilla firefox start page keeps logging itself on after I close all internet windows I come back and there it is. Why??? Make it stop.

mozilla firefox start page keeps logging itself on after I close all internet windows I come back and there it is. Why??? Make it stop.

I've got the exact same issue! I'm pretty sure it just started today too. It's so bizarre because we've all been using Firefox 26.0 for at least a month, right? How could the ''about:home'' page all of a sudden cause this issue?
I've been able to replicate this issue on a virtual machine running Windows XP SP3, so clearly it has nothing to do with Windows 7.

"CAHeadless error Sequence.cpp-2233" after computer starts up. Can you tell me what this is or how to fix it? Thanks!

Since installing Adobe Premier Elemnts 12 I get a message that says "CAHeadless error Sequence.cpp-2233" after computer starts up. Can you tell me what this is or how to fix it? Thanks!

If you are using Firefox 3.6.6 version, open Tools > Options >> Advanced - Network
The under Connections hit the Settings button - then select '''No proxy''' at the top of those settings. Restart Firefox and you should be all set.
''(3.6.6 added a new setting there - Use system proxy settings and sets that as the Default setting)''

How long can you revert back to the original photo after cropping?

Is there any time limit for how long can you revert back to the original photo after cropping? Are you always able to revert back?
Thanks.

DAM = "Digital Asset Manager", a fancy name for a filing system.
iPhoto keeps the original and makes one (usually much smaller) copy based on your edits. It is non-destructive in that if you crop, and later change the color, iPhoto will go back to the original and apply the corrections to get the new image, it will not simply modify the preview.
If you want a high quality copy of the image, use the export function which allows you to specify the size and compression.

IPad goes completely black while using it, comes back in a few seconds

iPad goes completely black while using it, comes back in a few seconds battery doesn't hold charge either

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe

Screen goes to sleep and won't come back on - how to fix?

My 2009 MacBook screen goes to sleep and won't come back on. It just stays black while the computer is still running. This just started happening one day for no apparent reason. Anyway to reconcile?

When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu 
Troubleshooting advice can depend on that information.

Saved Interactive Reports after APEX Upgrade

Hi,
When you do an APEX Upgrade are saved interactive reports kept?
Martin

I have been experiencing lost saved "as Named Report" Interactive reports, whenever I migrate the application from test to prod.
To clarify how we operate.
We have a test APEX environment that is separate to production. The Test app has a different App_id but uses the same schema name. In test the application Id is 1xxx (eg 1201) and in test 2xxx (2201). I export Test 1201 and then import into Prod changing the App_id to overwrite 2201. I always lose the saved reports. I just tried an experiment of creating the saved report in Test and seeing if it migrates to prod, but of course it does not.
How should I operate the two different Test and Prod environment to be "best practice" and not lose "as Named Report" Interactive report saved by the end-user?
thanks Peter

When I start up my new Imac with my password, it works but after going into sleepmode, I can't go out of the sleep moed with this password

I did the configuration of my new Imac and entered and confirmed my password when asked.
When my computer is switched of, I can startup with this password but after going into sleepmode, this password doesn't work.
The same when I go to "system preferences" users & groups, it's not possible to unlock the lock with this password
I'm sure that I never used another password.

If Apple was the one that replaced the ribbon cable, return it. If not, run AHT (Apple Hardware Test).
Using Apple Hardware Test to troubleshoot a hardware problem
Your issues might be caused by a hardware problem. Running Apple Hardware Test can help you solve this problem by showing you the faulty hardware.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
Press the Power Button to turn on the computer.
Press and hold the D key on the keyboard before the grey starting screen appears.
Continue to hold the D key until the loading screen shows up. You should see a globe.
When AHT has loaded, select your Language and then press the Return (↩) key.
Select the Perform Extended Testing checkbox located under the Test button.
Press the T key, select the Test button, or press the Return (↩) key to start running the diagnostics.
Report any issues it shows in a reply.
I hope I helped.

Crazy problems after upgrading to Leopard. Can you help?

I have a PowerMac G5, 1.8 dual processors. It came with 256MB of RAM, which I removed and replaced with 2GB of Crucial RAM soon after purchasing the computer nearly four years ago. I added a 250GB Maxtor hard drive to the 60GB original two years ago. I used the Maxtor drive for storage. Everything ran perfectly before Leopard and iLife ’08 installation.
Prior to installation, I cleaned off the 250GB Maxtor hard drive, and then installed Leopard to it using only the installation instructions on the disk. (FYI, I bought both programs from a local Apple store.) When prompted, I had it bring over the software and files from the original hard drive. My idea was to clean off the original, 60GB hard drive, and use it for storage. Due to problems galore, I have not done that.
When I waken my computer from an all-night Sleep mode, the following happens:
iWeb ’08 will load, but I cannot save anything to it.
Safari will load and immediately freeze.
Firefox will not load because it reports that it is already open.
Entourage will open initially, but then report it cannot open virtually any functions.
Word for Mac will open, but nothing can be saved.
iPhoto will open, but it cannot be used.
This is how it goes for every program—none are useable.
Though I attempt to use the Force Quit option, programs will not close. I am forced to do a hard quit—holding down the power button until the computer powers off. Upon reboot, all programs work fine. The trouble seems to occur after going into Sleep mode.
Just now I used the Disk Utility program, which upon completion, reported the following:
Verify permissions for “Whopper” (the name of the 250GB hard drive)
ACL found but not expected on “Library.”
Permissions verification complete
Repairing permissions for “Whopper”
ACL found but not expected on “Library.”
Permissions repair complete
I am now running a test on the RAM, using Rember, as suggested in another thread. –All tests passed.
So, there you have it.
Suggestions?

TheRever wrote:
You're not kidding, are you? Can I choose door number 2? To say that I'm disappointed and disillusioned would be insufficient. I've done precisely what I learned at a local Apple Store.
Sorry, I'm not kidding. But it isn't that big a deal. You are probably just frustrated and disillusioned based on your experiences with your flaky install. Try to remember how you felt about upgrading to Leopard before. That optimism is still warranted, with a little effort.
I'm sure Apple's official instructions work fine 99% of the time, but there is no way that Apple or anyone can guarantee an automatic upgrade. That is why Apple always says to have a good backup before any upgrade.
Would you translate what you instructed me to do? I don't know how to re-partition my original drive, nor do I know how to do a default MacOS X installation. It reads like I'm going to get a virtually naked machine, with none of the settings or files from before. Is that correct?
Yes. That is correct. You start with a naked drive and install everything from scratch. Your machine will be "as if" it came from the factory with Leopard installed.
You can boot off of the Leopard install DVD and run Disk Utility from the Tools? menu and delete partition on your "Whopper" drive. Then, return to the installer and just accept all the defaults. You don't have to worry about "upgrade install" vs. "archive & install". This will give you a fresh system.
Is it possible to wipe-out what I have done on the newer hard drive (250GB), and go back to the original 60GB drive? Is it possible to start again, or are the files on that drive now converted to the new? Does that make sense?
It would be ideal if you could throw away everything on the new drive. You can always copy off any new or modified files and restore those later. It sounds like you haven't been able to do much on Leopard anyway. It also sounds like you still have your 60 GB original, pre-leopard backup, which is a very good thing.
There may be some people who will tell you to do an "Archive and Install" to install a new 10.5. That will probably work too. You will have to resist the temptation to go into the archived area and just start copying files back. That would likely put you right back where you started. The same goes for any of the "migration" tools. For all I know, they work great 99% of the time. I've never tried them and I've had problems 0% of the time. The reason I always recommend a re-partition is because it guarantees you have a factory install. It makes restoring more difficult, but I consider that to be a good thing.
Here is my recommendation:
1) Make sure you have a backup of your current boot drive
2) Boot from from install DVD
3) Use Disk Utility to re-partition boot drive
4) Reinstall MacOS X using default options
5) Reinstall any applications
6) Setup user environment the way you want
7) Copy over your old user and data files into a quarantined location.
8) While maintaining backups of your new preferences and settings files, selectively restore your old files. These are things like your old Address book, your old Mail folder, and 3rd party application preferences files that contain license codes, etc.
Step 1-5 will take a couple of hours. Step 6, 7, and 8 may take a few days to get sorted out the way you want.

In an interactive report, after going to 5th list, can you come back to 2nd

Similar Messages

Maybe you are looking for