In an MBAM report, what does "Unable to Find Compatible TPM" mean?
All of our machines are fairly new and have recent TPM chips. Does this error mean:
1. The TPM is not enabled in the BIOS.
2. The TPM is enabled in the BIOS, but no one has taken ownership of it?
3. It could mean either of the above cases.
If it just needs to have someone take ownership of it, is there a way to do that remotely via the manage-bde.exe tool?
"To enable BitLocker you need to have the following requirements satisfied...
The computer must have a version 1.2 TPM chip or later.
The BIOS must support Trusted Computing Group (TCG) specifications.
The TPM chip must be enabled in the BIOS.
Above error indicates that you are missing the requirements..."
When I try to enable bit locker it gives me an error and won't allow me to enable it.
http://www.pcandtablet.com/windows-8-errors-and-crashes/273/when-i-try-to-enable-bit-locker-it-gives-me-an-error-and-wont-allow-me-to-enable-it.html
http://www.howtogeek.com/howto/6229/how-to-use-bitlocker-on-drives-without-tpm/
Hetti Arachchige V Aravinda |
Microsoft Community Support |
Windows Tech Information
(B.Sc, Microsoft Small Business Specialist, Dip. in Network Administration, MCP, MCTS,
MCSA, MCSE, MCITP, CCNA, MBCS)
Don't forget to mark this as helpful if you found this is helpful ,and its the answer mark this as answer.
Similar Messages
-
MBAM 2.5 Unable to find compatible TPM despite TPM available and device encrypted
We have just installed and are piloting MBAM 2.5. Everything seems to have gone fine, machines are checking in getting policies, encrypting as they are supposed to and we can query MBAM for recovery keys and TPM passwords to do recoveries as needed.
The only issue we have is when we come to look at the compliance reports we see the following
Enterprise Compliance report - Machines show 'Unable to find compatible TPM'
In Computer Compliance report for one of these machines , Protector type is TPM+PIN, Protector state is ON, Encryption State is Encrypted yet compliance status is Non-Compliant.
TPM is ON, Initialised and is v1.2
Any suggestions as to why my machines status is non-compliant?I was having the same problem with some of my Dell Laptop clients and although the Hotfix did solve the problem, I thought it was worth mentioning the first time the client reported back to MABM after installing the hotfix, only the Compliance Status changed
from "Non-Compliant" to "Compliant" and the Compliance Status Details still showed "Unable to find compatible TPM". It took one more reporting cycle for the Compliance Status Details to show "No Error". I
would also like to mention there is no indication of anything wrong with these systems in terms of looking at them via the TPM.msc, MBAM Event Log or WMI Win32_Tpm class/properties. The systems encrypt the drive via MBAM normally...they just don't
report back to the MABM database properly. The computers are running the latest BIOS and I have reset the TPM Security BIOS settings back to their Defaults several times with the same results. Thanks for the hotfix!!! -
What does "unable to connect to server" mean on my Iphone 4S when trying to access Mail?
What does "unable to connect to server" mean on my Iphone 4S when trying to access mail?
Ask your email provider for the correct settings to use to set it up on your phone.
-
Hello there.
We have a few machines, with the correct (generic) TPM driver discovered by Windows 7 and the enabling of TPM in the BIOS, that still do not get encrypted and are complaining to the MBAM console that they are "Unable to find compatible TPM."
Any idea what else might be ailing those workstations?What version of TPM is on the machine? Is the TPM initialized?
You could find it by typing TPM.msc from run. -
What does could not find layout echo mean
I am very new/ignorant to Garagdband, I keep trying but coming up with things like this that confound me
What does could not find layout Default Echo GB mean,
AND, how do I get it back.
thank you in advanceI see, you have still both options - "Update Sound Library" and "Restore Sound Library". That means, that you did not install any of the additional sounds that come with GarageBand 10.
In that case using "Update Sound Library" will probably add the missing layout. When I look at my own system library I am seeing the "layouts" installed the part of the library that is also used by Logic Pro X, and that are shared patches in the additional content of GarageBand 10.
If i select Restore does this overwrite what is there, or double the Sound Library and use more HD space?
"Restore" will not double files that are already there, but download missing items, and this way you will need more HD space. But I'd try first "Update", because the initial installation only installs a very basic set of instruments and loops. The additional contents will be several GB. -
What does unable to print, cannot find time capsule mean?
What does unable to print, cannot find time capsule mean?
It is a communications error, read the posts to the right "More like this" maybe you will find some info there.
-
What does unreadable file and unrecognizable format mean in my iphoto 11?
What does unreadable file and unrecognizable format mean in my iphoto 11?
A number of people have reported issues with some models of Kodak cameras and iPhoto. Reformatting the card with the camera usually solves the issue. Make sure you have the photos off the card first (Image Capture - in your Applications Folder - may help with that) as reformatting will erase the card.
Regards
TD -
What does the "yellow section" "other" files mean under hard disk storage?
what does the "yellow section" "other" files mean under hard disk storage?
david just to right of your initial post is a column entitled "More Like This." Check out some of the posts that seem similar.
-
What does "network connection has timed out" mean??!!
What does "network connection has timed out" mean?
It means that the destination server is taking too long to respond. This can sometimes be resolved by closing safari and reopening it, turning off your modem, and then after 10secs turning it back on, or if you have and airport extreme/express, or Time Capsule, restarting those.
Good Luck
Tarek -
HT201210 What does the do not disturb selecton mean? under settings
What does the 'do not disturb' selection mean under settings?
It allows you to not be disturbed by calls, messages, E-Mail notifications, etc. You can also set it for certain times, like from 10:30pm to 6am
-
what does multi, one, premium and limited mean in the context of Indesign servers please
You will likely get better program help in a program forum InDesign
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
What does the square and capital n mean in safari
What does the square and capital n mean in safari it's right next to the battery meter
HI and welcome to Apple Discussions...
If you have installed any new apps, (games?) that could indicate a symbol for it.
Carolyn -
What does could not find com.apple.ReportCrash.Self mean
What does " could not find com.apple.ReportCrash.Self" mean
You can stop this message by moving the related file to your User. I can give you directions for that, but it's a harmless message and you can just ignore it.
-
What does a yellow and black circle mean next to a movie you have downloaded
What does a yellow and black circle mean next to a movie you have downloaded
Hi,
Clicking on the name on the left would show the status of the add-on, as reviewed by Mozilla and also the related FAQ. Please also see [https://addons.mozilla.org/en-US/firefox/faq#preliminary preliminary status] and [https://addons.mozilla.org/en-US/developers/docs/policies/reviews review process.]
[https://forums.mozilla.org/addons/ Add-ons Forum] -
HT201210 what does 'firmware is not compatible' mean? What do I do to solve it?
what does 'firmware is not compatible' mean? What do I do to solve it?
Exactly what it says.
How are you trying to update the device, step by step?
Maybe you are looking for
-
how do i call this from jsp? <%spServicelnd temp = new spServicelnd();%> does not work because the program has a main. can i make another 2nd.java to call this spServiceInd.java then call 2nd.java by jsp? if yes, how??? The code is found below... imp
-
HT1296 how can i transfer non authorised music from my ipod to computer
I recently formatted my laptop and had to re-install itunes without having saved or backed up content which i'd added from my laptop. However music files which I had on my ipod (that were not purchased from itunes) are still there and I don't seem to
-
How to open menu again if I had close it? p.s. sorry for my English
Day ago my brother had close menu in the Mozilla ,so now I can't change nything in my mozilla. Please tell me how can I open menu again. p.s. sorry for my English.
-
Install The ERP SAP Best Practices Baseline Package (VE)
Hello We would like to install The ERP SAP Best Practices Baseline Package (VE) And reviewing the Quick Guide to Installing the SAP Best Practices Baseline Package (VE), included in the SAP NOTE 1171816, in the list of components installed we need S
-
Adding 'Your Reference'(VBKD-IHREZ) field to Field catalog in Output determ
The requirement is maintaining the condition table using Sales Org/Sales Doc Type/Your reference in output determination process. But the field 'Your reference(VBKD-IHREZ)' is not in the field catalog. Can someone tell me how to add the VBKD-IHREZ to